- 13 2月, 2012 23 次提交
-
-
由 Johan Hedberg 提交于
This patch adds an address type parameter to the disconnect command and response in order to match the latest mgmt API specification. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch renames the mgmt_remove_keys command to mgmt_unpair_device and updates its parameters to match the latest API (specifically, it adds an address type parameter to the command and its response). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andre Guedes 提交于
This is helpful for device discovery implementation & debuging. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
The correct length of the event is the size of the ev struct (not size of the pointer like the code was previously using) plus the length of the variable-sized EIR data at the end of the struct. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andre Guedes 提交于
This patch fixes a #define indentation in mgmt.c. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andre Guedes 提交于
This patch adds LE-Only discovery procedure support to MGMT Start Discovery command. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Vinicius Costa Gomes 提交于
Instead of having a separated command for removing SMP keys, we use the Remove Keys command to remove *all* keys. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Vinicius Costa Gomes 提交于
This adds a method to notify that a new LTK is available and a handler to store keys coming from userspace into the kernel LTK list. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Vinicius Costa Gomes 提交于
Every command handler of mgmt does a cast to the command structure so it can properly interpreted. So we can avoid that cast if we make those functions receive a void * directly. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
This patch implements the Cancel Pair Device command for mgmt. It's used by user space to cancel an ongoing pairing attempt which was triggered by the Pair Device command. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The ssp_mode is essentially just a boolean so it's more appropriate to have it simply as a flag in hdev->dev_flags. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch updates mgmt_ev_device_connected and mgmt_ev_device found to include an EIR-encoded remote name and class whenever possible. With this addition the mgmt_ev_remote_name event becomes unnecessary and can be removed. Since the connected event doesn't map to hci_conn_complete anymore a HCI_CONN_MGMT_CONNECTED flag is added to track when mgmt has been notified about a connection. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
There's no need to have a separate device class field since the same information can be encoded into the EIR data. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch add a two byte eir_len parameter mgmt_ev_device_found. Since it's unlikely that the data will in the short term be much bigger than conventional EIR lengths just use a small stack based buffer for now to avoid dynamic memory allocation & freeing. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
User space uses device_(dis)connected instead of just (dis)connected so rename the defines and functions to match this. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andre Guedes 提交于
This patch adds a new parameter to mgmt_device_found() to inform the length of 'eir' pointer. EIR data from LE advertising report event doesn't have a fixed length as EIR data from extended inquiry result event does. We needed to change mgmt_device_found() so it copies 'eir_len' bytes instead of HCI_MAX_EIR_LENGTH. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
This patch makes sure that devices with stronger signal (RSSI closer to 0) are sorted first in the resolve list and will therefore get their names resolved first during device discovery. Since it's more likely that the device the user is trying to discover has a strong signal due to its proximity this ensures that the user gets the "device found" event for it more quickly. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
There's no point in exposing these to user-space (which is what happens to everything in hdev->flags) so move them to dev_flags instead. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds the necessary logic to perform name lookups after inquiry completes. This is done by checking for entries in the resolve list after each inquiry complete and remote name complete HCI event. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds proper state tracking to the device discovery process. This makes it possible to return appropriate errors when trying to stop a non-active discovery or start discovery when it is already ongoing. Once name resolving is implemented this also makes it possible to know what the right action to do is when a remote name lookup is cancelled. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This struct is used for not just inquiry caching but also for general device discovery state tracking so it's better to rename it to something more appropriate. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds initial support for mgmt_confirm_name. It adds the necessary tracking of the name state by extending the inquiry cache. The actual name resolving operation (to be done once inquiry is finished) is not yet part of this patch. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c to check if EIR data has the complete name) so it's better to have them in a single public place, i.e. hci.h. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 03 1月, 2012 2 次提交
-
-
由 Andre Guedes 提交于
Stop Discovery Command Status Event should use mgmt status code. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch renames hdev->extfeatures to hdev->host_features since it holds the extended features Page 1 (aka host features). Signed-off-by: NAndre Guedes <aguedespe@gmail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 23 12月, 2011 1 次提交
-
-
由 Brian Gix 提交于
Low Energy pairing is performed through the SMP (Security Manager Protocol) mechanism rather than HCI. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 19 12月, 2011 9 次提交
-
-
由 Johan Hedberg 提交于
This patch fixes user_confirm_neg_reply to use the appropriate struct for accessing the call parameters. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
We do not want the service cache to be enabled indefinitely after mgmt_read_info is called. To solve this a timer is added which will automatically disable the cache if mgmt_set_dev_class isn't called within 5 seconds of calling mgmt_read_info. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Due to the upcoming addition of a service cache timer the functions to update the EIR and CoD need to be higher up in mgmt.c in order to avoid unnecessary forward-declarations. This patch simply moves code around without any other changes in order to make subsequent patches more readable. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Instead of having an explicit service cache command we can make the mgmt API simpler by implicitly enabling the cache when mgmt_read_info is called for the first time and disabling it when mgmt_set_dev_class is called. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Fast connectable is logically after the connectable property so that's where it should show up in the code as well (it's also after connectable in the settings bitfield). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch updates the mgmt_read_info and related messages to the latest management API which uses a bitfield of settings instead of individual boolean values. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
hdev->workqueue should be only for rx/tx, so move this one out. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
hdev->workqueue will be only for for rx/tx/cmd processing, all other small works should go to the system workqueue for now. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 01 12月, 2011 1 次提交
-
-
由 Brian Gix 提交于
For some MITM protection pairing scenarios, the user is required to enter or accept a 6 digit passkey. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 22 11月, 2011 2 次提交
-
-
由 Brian Gix 提交于
Low Energy (LE) pairing responses must be recognized and handled differently from BR/EDR pairing responses. BR/EDR responses are handled via HCI commands by the LMP layer, and LE responses are handled by the Host. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Brian Gix 提交于
There are 4 possible User Responses to pairing requests, and they all share the same checks and handling. This restructures the handling of the two Confirm responses in preperation for the second two. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 11月, 2011 2 次提交
-
-
由 Johan Hedberg 提交于
The mgmt_start_discovery command contains the type of discovery that should be started so this should be passed to the start_discovery function. This patch doesn't yet add any action depending on the type of the requested discovery. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The command complete event was completely missing for this command. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-