The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.

This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device type and output_type fields differ mostly for
historical reasons. The output_type field is required for all devices
but the display at the end of the pipeline, and must be set to
OMAP_DISPLAY_TYPE_NONE for the latter. The type field is required for
all devices but the internal encoder, for which it is ignored.

The only reason why the output_type field must be set to
OMAP_DISPLAY_TYPE_NONE for the display at the end of the pipeline is to
identify omap_dss_device instances corresponding to displays. This is
not documented and confusing.

Clean the code by adding a new display field to the omap_dss_device
structure to identify displays, and merge the type and output_type
fields.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver initialization procedure starts by connecting all
available pipelines, gathering related information (such as output and
display DSS devices, and DT aliases), sorting them by alias, and finally
creates all the DRM/KMS objects.

When using DRM bridges instead of DSS devices, we will need to attach to
the bridges before getting the aliases. As attaching to bridges requires
an encoder object, we have to reorganize the initialization sequence to
create encoders before getting aliases and sorting the pipelines.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Now that the direction of OF graph walk has been reversed, there's no
need to lookup devices by port as we have no sink device connected
through multiple sink ports. Simplify OF lookup of the DSS devices to
look them up by node only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DPI and SDI encoders store the full videomode upon mode set, to only
use the value of the pixel clock when enabling the encoder. This wastes
memory. Store the pixel clock value only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Replace internal usage of struct videomode with struct drm_display_mode
in order to avoid converting needlessly between the data structures.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device .check_timings() and .set_timings() operations
operate on struct videomode, while the DRM API operates on struct
drm_display_mode. This forces conversion from to videomode in the
callers. While that's not a problem per se, it creates a difference with
the drm_bridge API.

Replace the videomode parameter to the .check_timings() and
.set_timings() operations with a drm_display_mode. This pushed the
conversion to videomode down to the DSS devices in some cases. If needed
they will be converted to operate on drm_display_mode natively.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The encoder .atomic_check() and connector .mode_valid() operations both
walk through the dss devices in the pipeline to validate the mode.
Factor out the common code in a new omap_drm_connector_mode_fixup()
function.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The mode setting handler of the VENC stores the video mode internally,
to then convert it to a configuration when programming the hardware. The
stored mode is otherwise unused. Cache the configuration directly
instead.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DISPC timings checks relate to the CRTC, but they're performed in
the encoder and connector .atomic_check() and .mode_valid() operations.
Move them to the CRTC .mode_valid() operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The field is only used to check whether the device is connected, and we
can do so by checking the dss field instead. Remove the src field.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

For HDMI pipelines, when the output gets disconnected the device
handling CEC needs to be notified. Instead of guessing which device that
would be (and sometimes getting it wrong), notify all devices in the
pipeline.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The source pointer will be removed to the omap_dss_device structure.
Store it internally in the DSI panel driver data.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Display pipelines based on drm_bridge are handled from the bridge
closest to the CRTC. To move to that model we thus need to transition
away from walking pipelines in the other direction, and from accessing
the device at the end of the pipeline when possible.

Remove most accesses to the display device from the omap_connector
implementation, and don't store it in the omap_connector structure.

- For debug messages we can simply use the connector name instead.
- For type checks we can use the drm_connector type.
- For operation lookup we can start at the other end of the pipeline and
  locate the last matching device.

The display device is still passed to the connector init function in
order to find its type, which requires access to the end of the
pipeline.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DT bindings for the OMAP DSS allow assigning numerical IDs to
display outputs through display entries in the alias node. The driver
uses this information to sort pipelines according to the order specified
in DT, making it possible for a system to give a priority order to
outputs.

Retrieval of the alias ID is done when initializing display dss devices.
That code will be removed when moving to drm_bridge and drm_panel. Move
retrieval of the alias ID to display pipeline connection time and store
it in the pipeline structure instead to keep the feature.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The display isn't used by the encoder implementation, don't pass it to
the initialization function and store it internally needlessly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The TV encoder supports both PAL and NTSC modes, but when queried for
the list of modes it supports, only the currently selected mode is
reported. Fix it and report the two modes unconditionally.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of manually iterating over the dss devices in the pipeline to
find the first one that implements the .get_modes() operation, add a new
operation flag for .get_modes() and use the omap_connector_find_device()
helper function to locate the right dss device.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Now that the .get_modes() operations takes a drm_connector and fills it
with modes, it becomes easy to fill display information in the same
operation without requiring a separate .get_size() opearation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omap_dss_device operations expose fixed video timings through a
.get_timings() operation that return a single timing for the device. To
prepare for the move to drm_bridge, modify the API to instead add DRM
modes directly to the connector.

As this puts more burden on display devices, we also create a helper
function for panels to add a single DRM mode from the panel video
timings.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

All the internal encoders share common init and cleanup code. Factor it
out to separate functions.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The field is only used in a safety check during device
connection/disconnection, where the src field can be easily used
instead. Remove it and use src.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel
model by reversing the direction of the DSS device .enable() and
.disable() operations. This completes the move to the DRM bridge model,
with the notable exception of the DSI pipelines that will require more
work.

We also adapt the omapdss shutdown handler dss_shutdown() to shut down
all active pipelines starting from the pipeline output device instead of
the display device.

As a consequence the for_each_dss_display() macro isn't used and can be
removed, and the omapdss_device_get_next() function underlying the macro
can be simplified to search for output devices only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The displays (connectors, panels and encoders) bail out from their
.enable() and .disable() handlers if the dss device is already enabled
or disabled. Those safety checks are not needed when the functions are
called through the omapdss_device_ops, as the .enable() and .disable()
handlers are called from the DRM atomic helpers that already guarantee
that no double enabling or disabling can occur.

However, the handlers are also called directly from the .remove()
handler. While this shouldn't be needed either as the modules can't be
removed as long as the device is in use, it's still a good practice to
disable the device explicitly. There is currently a safety check in
.remove() in some drivers but not all of them.

Remove the safety checks from the .enable() and .disable() handlers, and
add missing ones in the .remove() handler.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The displays (connectors, panels and encoders) return an error from
their .enable() handler when the dss device is not connected. They also
disconnect the dss device explicitly from their .remove() handler if it
is still connected.

Those safety checks are not needed:

- The .enable() handler is called from code paths that access the dss
  devices chain from the display device, which is set to NULL when the
  device isn't connected.

- The .remove() handler can only be called when unloading the module as
  the driver has the suppress_bind_attrs attribute set, and a reference
  to the module is taken when constructing the dss devices chain, so the
  module can only be unloaded when the dss device is disconnected.

Remove the safety checks.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The internal encoders return an error from their .enable() handler when
their are not connected to a dss manager. As the flag used is set and
cleared in the connect and disconnect handlers, this effectively checks
whether the omap_dss_device is connected.

The .enable() handler is called from code paths that access the dss
devices chain from the display device, which is set to NULL when the
device isn't connected, making it impossible to access the device in
that case.

The safety check is thus not needed, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

All .enable() and .disable() handlers for panels and connectors share
common code that validates and updates the device's state. Move it to
common locations in the omap_encoder_enable() and omap_encoder_disable()
handlers.

The enabled check in the .disable() handler is left untouched, it will
be addressed separately.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of rolling out custom suspend/resume implementations based on
state information stored in the driver's data structures, use the atomic
suspend/resume helpers that rely on a DRM atomic state object.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The venc_device structure wss_data field is set to 0 and never otherwise
modified, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The kobj field from struct omap_dss_device is not used. Remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_connector_attached_encoder() doesn't exist anymore, remove its
declaration from omap_connector.h.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The mode_valid_path() function validates the mode it receives without
ever modifying it. Constify the mode pointer argument to make that
explicit.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Convert to use vm_fault_t type as return type for fault handler.

kbuild reported warning during testing of
*mm-create-the-new-vm_fault_t-type.patch* available in below link -
https://patchwork.kernel.org/patch/10752741/

  kernel/memremap.c:46:34: warning: incorrect type in return expression
                           (different base types)
  kernel/memremap.c:46:34: expected restricted vm_fault_t
  kernel/memremap.c:46:34: got int

This patch has fixed the warnings and also hmm_devmem_fault() is
converted to return vm_fault_t to avoid further warnings.

[sfr@canb.auug.org.au: drm/nouveau/dmem: update for struct hmm_devmem_ops member change]
  Link: http://lkml.kernel.org/r/20190220174407.753d94e5@canb.auug.org.au
Link: http://lkml.kernel.org/r/20190110145900.GA1317@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GC owner suggested the setting should be applied which is missed by HW default
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set sampling period as 500ms to provide a smooth power
reading output. Also, correct the register for power
reading.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

A workaround to override the fan target temperature in SMC table.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.

To avoid breaking legacy userspace relax the newly introduced fix.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 5c4604e7 ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Adam Zabrocki <adamza@microsoft.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit a90e1948)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Atomic state needs to be put even if the commit was successful.

Fixes: dba14b27 ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD")
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-1-jose.souza@intel.com
(cherry picked from commit a551cd66)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

We may race the interrupt signaling with retirement, in which case the
order in which we acquire the reference inside the interrupt is vital to
provide the correct barrier against the request being freed in
retirement, i.e. we need to acquire our reference before marking the
breadcrumb as cancelled (as soon as the breadcrumb is cancelled
retirement may drop its reference to the request without serialisation
with the interrupt handler).

<3>[  683.372226] BUG i915_request (Tainted: G     U           ): Object already free
<3>[  683.372269] -----------------------------------------------------------------------------

<4>[  683.372323] Disabling lock debugging due to kernel taint
<3>[  683.372393] INFO: Allocated in i915_request_alloc+0x169/0x810 [i915] age=0 cpu=2 pid=1420
<3>[  683.372412] 	kmem_cache_alloc+0x21c/0x280
<3>[  683.372478] 	i915_request_alloc+0x169/0x810 [i915]
<3>[  683.372540] 	i915_gem_do_execbuffer+0x84e/0x1ae0 [i915]
<3>[  683.372603] 	i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915]
<3>[  683.372617] 	drm_ioctl_kernel+0x83/0xf0
<3>[  683.372626] 	drm_ioctl+0x2f3/0x3b0
<3>[  683.372636] 	do_vfs_ioctl+0xa0/0x6e0
<3>[  683.372645] 	ksys_ioctl+0x35/0x60
<3>[  683.372654] 	__x64_sys_ioctl+0x11/0x20
<3>[  683.372664] 	do_syscall_64+0x55/0x190
<3>[  683.372675] 	entry_SYSCALL_64_after_hwframe+0x49/0xbe
<3>[  683.372740] INFO: Freed in i915_request_retire_upto+0xfb/0x2e0 [i915] age=0 cpu=0 pid=1419
<3>[  683.372807] 	i915_request_retire_upto+0xfb/0x2e0 [i915]
<3>[  683.372870] 	i915_request_add+0x3bd/0x9d0 [i915]
<3>[  683.372931] 	i915_gem_do_execbuffer+0x141c/0x1ae0 [i915]
<3>[  683.372991] 	i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915]
<3>[  683.373001] 	drm_ioctl_kernel+0x83/0xf0
<3>[  683.373008] 	drm_ioctl+0x2f3/0x3b0
<3>[  683.373015] 	do_vfs_ioctl+0xa0/0x6e0
<3>[  683.373023] 	ksys_ioctl+0x35/0x60
<3>[  683.373030] 	__x64_sys_ioctl+0x11/0x20
<3>[  683.373037] 	do_syscall_64+0x55/0x190
<3>[  683.373045] 	entry_SYSCALL_64_after_hwframe+0x49/0xbe
<3>[  683.373054] INFO: Slab 0x0000000079bcdd71 objects=30 used=2 fp=0x000000006d77b8af flags=0x8000000000010201
<3>[  683.373069] INFO: Object 0x000000006d77b8af @offset=24000 fp=0x000000007b061eab

<3>[  683.373083] Redzone 00000000ee47ef28: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373097] Redzone 000000000cb91471: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373111] Redzone 00000000cf2b86ee: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373125] Redzone 00000000f1f5a2cd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373139] Object 000000006d77b8af: 00 00 00 00 5a 5a 5a 5a 00 3c 49 c0 ff ff ff ff  ....ZZZZ.<I.....
<3>[  683.373153] Object 000000006f9b6204: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373167] Object 0000000091410ffb: e0 dd 6b fa 87 9f ff ff e0 dd 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373181] Object 000000004cdf799d: 20 de 6b fa 87 9f ff ff 3d 00 00 00 00 00 00 00   .k.....=.......
<3>[  683.373195] Object 00000000545afebc: aa b3 00 00 00 00 00 00 0f 00 00 00 00 00 00 00  ................
<3>[  683.373209] Object 00000000e4a394a8: 25 bd bd 1b 9f 00 00 00 00 00 00 00 5a 5a 5a 5a  %...........ZZZZ
<3>[  683.373223] Object 0000000029a7878a: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
<3>[  683.373237] Object 00000000d37797b3: ff ff ff ff ff ff ff ff e8 6e 57 c0 ff ff ff ff  .........nW.....
<3>[  683.373251] Object 00000000d50414f6: 00 b3 c8 8e ff ff ff ff 80 b0 c8 8e ff ff ff ff  ................
<3>[  683.373265] Object 00000000c28e8847: 41 01 4b c0 ff ff ff ff 00 00 88 8e 88 9f ff ff  A.K.............
<3>[  683.373279] Object 00000000c74212ab: 38 c1 6d 8a 88 9f ff ff 58 21 74 8a 88 9f ff ff  8.m.....X!t.....
<3>[  683.373293] Object 000000000d8012cf: c0 c1 6d 8a 88 9f ff ff 58 79 dd d9 87 9f ff ff  ..m.....Xy......
<3>[  683.373306] Object 00000000c9900b91: 98 d0 4e 8a 88 9f ff ff 58 3c e8 9b 88 9f ff ff  ..N.....X<......
<3>[  683.373320] Object 0000000044bb8c3d: 58 3c e8 9b 88 9f ff ff 64 f5 04 00 00 00 00 00  X<......d.......
<3>[  683.373334] Object 00000000180c4cca: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
<3>[  683.373348] Object 00000000c9044498: ff ff ff ff ff ff ff ff e0 6e 57 c0 ff ff ff ff  .........nW.....
<3>[  683.373362] Object 0000000072d0dfb3: 00 00 00 00 00 00 00 00 c0 b1 c8 8e ff ff ff ff  ................
<3>[  683.373376] Object 0000000081f198b9: 55 01 4b c0 ff ff ff ff d8 de 6b fa 87 9f ff ff  U.K.......k.....
<3>[  683.373390] Object 000000006a375a13: d8 de 6b fa 87 9f ff ff cc 05 39 c0 ff ff ff ff  ..k.......9.....
<3>[  683.373404] Object 00000000b8392dd1: ff ff ff ff 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ....ZZZZZZZZZZZZ
<3>[  683.373418] Object 00000000e5c1bbcb: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373432] Object 00000000199feccd: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373446] Object 0000000020f5e08b: 20 df 6b fa 87 9f ff ff 20 df 6b fa 87 9f ff ff   .k..... .k.....
<3>[  683.373460] Object 0000000090591b0f: 30 df 6b fa 87 9f ff ff 30 df 6b fa 87 9f ff ff  0.k.....0.k.....
<3>[  683.373473] Object 00000000232f7cd0: 40 df 6b fa 87 9f ff ff 40 df 6b fa 87 9f ff ff  @.k.....@.k.....
<3>[  683.373487] Object 0000000060458027: 50 df 6b fa 87 9f ff ff 50 df 6b fa 87 9f ff ff  P.k.....P.k.....
<3>[  683.373501] Object 00000000e3c82ce2: 06 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
<3>[  683.373515] Object 00000000ec804eb8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373529] Object 00000000ce7ccc08: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373543] Object 000000002dbc575c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373557] Object 00000000b86d3417: 5a 5a 5a 5a 5a 5a 5a 5a 00 de 6b fa 87 9f ff ff  ZZZZZZZZ..k.....
<3>[  683.373571] Object 00000000d1e82276: b8 61 dd d9 87 9f ff ff a0 06 00 00 d0 06 00 00  .a..............
<3>[  683.373585] Object 00000000cc53f969: e8 06 00 00 20 07 00 00 28 07 00 00 00 00 00 00  .... ...(.......
<3>[  683.373599] Object 00000000ea2426d2: 40 0c 8c 7b 88 9f ff ff 00 00 00 00 00 00 00 00  @..{............
<3>[  683.373613] Object 00000000b860c1c3: 68 0d 8c 7b 88 9f ff ff 68 25 8c 7b 88 9f ff ff  h..{....h%.{....
<3>[  683.373627] Object 0000000016455ea0: 96 d5 05 00 01 00 00 00 00 5a 5a 5a 5a 5a 5a 5a  .........ZZZZZZZ
<3>[  683.373640] Object 00000000e66ede82: 00 e0 6b fa 87 9f ff ff 00 e0 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373654] Object 0000000080964939: 10 e0 6b fa 87 9f ff ff 10 e0 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373668] Object 00000000e7ffc5dd: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de  ................
<3>[  683.373682] Object 000000000ce9d6ca: 00 02 00 00 00 00 ad de 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
<3>[  683.373696] Object 00000000386659d0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373710] Redzone 0000000075d2069d: bb bb bb bb bb bb bb bb                          ........
<3>[  683.373723] Padding 0000000054e14c6b: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373737] Padding 00000000425e5b34: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373751] Padding 00000000ad3d4db9: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<4>[  683.373767] CPU: 1 PID: 151 Comm: kworker/1:2 Tainted: G    BU            5.0.0-rc8-g39139489403b-drmtip_236+ #1
<4>[  683.373769] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3087.A00.1902250334 02/25/2019
<4>[  683.373773] Workqueue: events delayed_fput
<4>[  683.373775] Call Trace:
<4>[  683.373777]  <IRQ>
<4>[  683.373781]  dump_stack+0x67/0x9b
<4>[  683.373783]  free_debug_processing+0x344/0x370
<4>[  683.373832]  ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373836]  __slab_free+0x337/0x4f0
<4>[  683.373840]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4>[  683.373844]  ? debug_check_no_obj_freed+0x132/0x210
<4>[  683.373889]  ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373892]  ? kmem_cache_free+0x275/0x2e0
<4>[  683.373894]  kmem_cache_free+0x275/0x2e0
<4>[  683.373939]  intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373984]  gen8_cs_irq_handler+0x4e/0xa0 [i915]
<4>[  683.374026]  gen11_irq_handler+0x24b/0x330 [i915]
<4>[  683.374032]  __handle_irq_event_percpu+0x41/0x2d0
<4>[  683.374034]  ? handle_irq_event+0x27/0x50
<4>[  683.374038]  handle_irq_event_percpu+0x2b/0x70
<4>[  683.374040]  handle_irq_event+0x2f/0x50
<4>[  683.374044]  handle_edge_irq+0xe7/0x190
<4>[  683.374048]  handle_irq+0x67/0x160
<4>[  683.374051]  do_IRQ+0x5e/0x130
<4>[  683.374054]  common_interrupt+0xf/0xf

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109827
Fixes: 52c0fdb2 ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304114113.371-1-chris@chris-wilson.co.uk
(cherry picked from commit e781a7a3)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Prepare a nice little onion unwind to ensure that we always free the
spinner if we __sseu_prepare fails.

Fixes: c06ee6ff ("drm/i915/selftests: Context SSEU reconfiguration tests")
Reported-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215195010.16637-1-chris@chris-wilson.co.ukReviewed-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
(cherry picked from commit 2a4a2754)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>