Device unit for port buffers size, xoff_threshold and xon_threshold is
cells. Fix a bug in driver where cell unit size was hard-coded to
128 bytes. This hard-coded value is buggy, as it is wrong for some hardware
versions.

Driver to read cell size from SBCAM register and translate bytes to cell
units accordingly.

In order to fix the bug, this patch exposes SBCAM (Shared buffer
capabilities mask) layout and defines.

If SBCAM.cap_cell_size is valid, use it for all bytes to cells
calculations. If not valid, fallback to 128.

Cell size do not change on the fly per device. Instead of issuing SBCAM
access reg command every time such translation is needed, cache it in
mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz
as a param to every function that needs bytes to cells translation.

While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to
en_dcbnl.c, as it is only used by that file.

Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Some released FW versions mistakenly don't set the capability that 50G
per lane link-modes are supported for VFs (ptys_extended_ethernet
capability bit). When the capability is unset, read
PTYS.ext_eth_proto_capability (always reliable).
If PTYS.ext_eth_proto_capability is valid (has a non-zero value)
conclude that the HCA supports 50G per lane. Otherwise, conclude that
the HCA doesn't support 50G per lane.

Fixes: a08b4ed1 ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

After function reload, CPU mapping used by aRFS RX is broken, leading to
a kernel panic. Fix by moving initialization of rx_cpu_rmap from
netdev_init to netdev_attach. IRQ table is re-allocated on mlx5_load,
but netdev is not re-initialize.

Trace of the panic:
[ 22.055672] general protection fault, probably for non-canonical address 0x785634120000ff1c: 0000 [#1] SMP PTI
[ 22.065010] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 5.7.0-rc2-for-upstream-perf-2020-04-21_16-34-03-31 #1
[ 22.067967] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 22.071174] RIP: 0010:get_rps_cpu+0x267/0x300
[ 22.075692] RSP: 0018:ffffc90000244d60 EFLAGS: 00010202
[ 22.076888] RAX: ffff888459b0e400 RBX: 0000000000000000 RCX:0000000000000007
[ 22.078364] RDX: 0000000000008884 RSI: ffff888467cb5b00 RDI:0000000000000000
[ 22.079815] RBP: 00000000ff342b27 R08: 0000000000000007 R09:0000000000000003
[ 22.081289] R10: ffffffffffffffff R11: 00000000000070cc R12:ffff888454900000
[ 22.082767] R13: ffffc90000e5a950 R14: ffffc90000244dc0 R15:0000000000000007
[ 22.084190] FS: 0000000000000000(0000) GS:ffff88846fc80000(0000)knlGS:0000000000000000
[ 22.086161] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 22.087427] CR2: ffffffffffffffff CR3: 0000000464426003 CR4:0000000000760ee0
[ 22.088888] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[ 22.090336] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[ 22.091764] PKRU: 55555554
[ 22.092618] Call Trace:
[ 22.093442] <IRQ>
[ 22.094211] ? kvm_clock_get_cycles+0xd/0x10
[ 22.095272] netif_receive_skb_list_internal+0x258/0x2a0
[ 22.096460] gro_normal_list.part.137+0x19/0x40
[ 22.097547] napi_complete_done+0xc6/0x110
[ 22.098685] mlx5e_napi_poll+0x190/0x670 [mlx5_core]
[ 22.099859] net_rx_action+0x2a0/0x400
[ 22.100848] __do_softirq+0xd8/0x2a8
[ 22.101829] irq_exit+0xa5/0xb0
[ 22.102750] do_IRQ+0x52/0xd0
[ 22.103654] common_interrupt+0xf/0xf
[ 22.104641] </IRQ>

Fixes: 4383cfcc ("net/mlx5: Add devlink reload")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When detaching netdev, remove vxlan port configuration using
udp_tunnel_drop_rx_info. During function reload, configuration will be
restored using udp_tunnel_get_rx_info. This ensures sync between
firmware and driver. Use udp_tunnel_get_rx_info even if its physical
interface is down.

Fixes: 4383cfcc ("net/mlx5: Add devlink reload")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In mlx5e_configure_flower() flow pointer is protected by rcu read lock.
However, after cited commit the pointer is being used outside of rcu read
block. Extend the block to protect all pointer accesses.

Fixes: 553f9328 ("net/mlx5e: Support tc block sharing for representors")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In helper function is_flow_rule_duplicate_allowed() verify that rpviv
pointer is not NULL before dereferencing it. This can happen when device is
in NIC mode and leads to following crash:

[90444.046419] BUG: kernel NULL pointer dereference, address: 0000000000000000
[90444.048149] #PF: supervisor read access in kernel mode
[90444.049781] #PF: error_code(0x0000) - not-present page
[90444.051386] PGD 80000003d35a4067 P4D 80000003d35a4067 PUD 3d35a3067 PMD 0
[90444.053051] Oops: 0000 [#1] SMP PTI
[90444.054683] CPU: 16 PID: 31736 Comm: tc Not tainted 5.8.0-rc1+ #1157
[90444.056340] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[90444.058079] RIP: 0010:mlx5e_configure_flower+0x3aa/0x9b0 [mlx5_core]
[90444.059753] Code: 24 50 49 8b 95 08 02 00 00 48 b8 00 08 00 00 04 00 00 00 48 21 c2 48 39 c2 74 0a 41 f6 85 0d 02 00 00 20 74 16 48 8b 44 24 20 <48> 8b 00 66 83 78 20 ff 74 07 4d 89 aa e0 00 00 00 48 83 7d 28 00
[90444.063232] RSP: 0018:ffffabe9c61ff768 EFLAGS: 00010246
[90444.065014] RAX: 0000000000000000 RBX: ffff9b13c4c91e80 RCX: 00000000000093fa
[90444.066784] RDX: 0000000400000800 RSI: 0000000000000000 RDI: 000000000002d5e0
[90444.068533] RBP: ffff9b174d308468 R08: 0000000000000000 R09: ffff9b17d63003f0
[90444.070285] R10: ffff9b17ea288600 R11: 0000000000000000 R12: ffffabe9c61ff878
[90444.072032] R13: ffff9b174d300000 R14: ffffabe9c61ffbb8 R15: ffff9b174d300880
[90444.073760] FS:  00007f3c23775480(0000) GS:ffff9b13efc80000(0000) knlGS:0000000000000000
[90444.075492] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[90444.077266] CR2: 0000000000000000 CR3: 00000003e2a60002 CR4: 00000000001606e0
[90444.079024] Call Trace:
[90444.080753]  tc_setup_cb_add+0xca/0x1e0
[90444.082415]  fl_hw_replace_filter+0x15f/0x1f0 [cls_flower]
[90444.084119]  fl_change+0xa59/0x13dc [cls_flower]
[90444.085772]  ? wait_for_completion+0xa8/0xf0
[90444.087364]  tc_new_tfilter+0x3f5/0xa60
[90444.088960]  rtnetlink_rcv_msg+0xeb/0x360
[90444.090514]  ? __d_lookup_done+0x76/0xe0
[90444.092034]  ? proc_alloc_inode+0x16/0x70
[90444.093560]  ? prep_new_page+0x8c/0xf0
[90444.095048]  ? _cond_resched+0x15/0x30
[90444.096483]  ? rtnl_calcit.isra.0+0x110/0x110
[90444.097907]  netlink_rcv_skb+0x49/0x110
[90444.099289]  netlink_unicast+0x191/0x230
[90444.100629]  netlink_sendmsg+0x243/0x480
[90444.101984]  sock_sendmsg+0x5e/0x60
[90444.103305]  ____sys_sendmsg+0x1f3/0x260
[90444.104597]  ? copy_msghdr_from_user+0x5c/0x90
[90444.105916]  ? __mod_lruvec_state+0x3c/0xe0
[90444.107210]  ___sys_sendmsg+0x81/0xc0
[90444.108484]  ? do_filp_open+0xa5/0x100
[90444.109732]  ? handle_mm_fault+0x117b/0x1e00
[90444.110970]  ? __check_object_size+0x46/0x147
[90444.112205]  ? __check_object_size+0x136/0x147
[90444.113402]  __sys_sendmsg+0x59/0xa0
[90444.114587]  do_syscall_64+0x4d/0x90
[90444.115782]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[90444.116953] RIP: 0033:0x7f3c2393b7b8
[90444.118101] Code: Bad RIP value.
[90444.119240] RSP: 002b:00007ffc6ad8e6c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[90444.120408] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3c2393b7b8
[90444.121583] RDX: 0000000000000000 RSI: 00007ffc6ad8e740 RDI: 0000000000000003
[90444.122750] RBP: 000000005eea0c3a R08: 0000000000000001 R09: 00007ffc6ad8e68c
[90444.123928] R10: 0000000000404fa8 R11: 0000000000000246 R12: 0000000000000001
[90444.125073] R13: 0000000000000000 R14: 00007ffc6ad92a00 R15: 00000000004866a0
[90444.126221] Modules linked in: act_skbedit act_tunnel_key act_mirred bonding vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_r
apl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel mlxfw kvm act_ct nf_flow_table nf_nat nf_conntrack irqbypass crct10dif_pclmul nf_defrag_ipv6 igb ipmi_ssif libcrc32c crc32_pclmul crc32c_intel ipmi_si nf_defrag_ipv4 ptp ghash_clmulni_intel mei_me ses iTCO_wdt i2c_i801 pps_core
ioatdma iTCO_vendor_support joydev mei enclosure intel_cstate i2c_smbus wmi dca ipmi_devintf intel_uncore lpc_ich ipmi_msghandler pcspkr acpi_pad acpi_power_meter ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
[90444.136253] CR2: 0000000000000000
[90444.137621] ---[ end trace 924af62aa2b151bd ]---

Fixes: 553f9328 ("net/mlx5e: Support tc block sharing for representors")
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Refactoring eswitch ingress acl codes accidentally inserts extra
memset zero that removes vlan and/or qos setting in legacy mode.

Fixes: 07bab950 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: NVu Pham <vuhuong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.

As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.

In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.

Fixes: a708fb7b ("net/mlx5e: ethtool, Add support for EEPROM high pages query")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

syzkaller found its way into setsockopt with TCP_CONGESTION "cdg".
tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock
just copies all the memory, the allocated pointer will be copied as
well, if the app called setsockopt(..., TCP_CONGESTION) on the listener.
If now the socket will be destroyed before the congestion-control
has properly been initialized (through a call to tcp_init_transfer), we
will end up freeing memory that does not belong to that particular
socket, opening the door to a double-free:

[   11.413102] ==================================================================
[   11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0
[   11.415329]
[   11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80
[   11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   11.418148] Call Trace:
[   11.418534]  <IRQ>
[   11.418834]  dump_stack+0x7d/0xb0
[   11.419297]  print_address_description.constprop.0+0x1a/0x210
[   11.422079]  kasan_report_invalid_free+0x51/0x80
[   11.423433]  __kasan_slab_free+0x15e/0x170
[   11.424761]  kfree+0x8c/0x230
[   11.425157]  tcp_cleanup_congestion_control+0x58/0xd0
[   11.425872]  tcp_v4_destroy_sock+0x57/0x5a0
[   11.426493]  inet_csk_destroy_sock+0x153/0x2c0
[   11.427093]  tcp_v4_syn_recv_sock+0xb29/0x1100
[   11.427731]  tcp_get_cookie_sock+0xc3/0x4a0
[   11.429457]  cookie_v4_check+0x13d0/0x2500
[   11.433189]  tcp_v4_do_rcv+0x60e/0x780
[   11.433727]  tcp_v4_rcv+0x2869/0x2e10
[   11.437143]  ip_protocol_deliver_rcu+0x23/0x190
[   11.437810]  ip_local_deliver+0x294/0x350
[   11.439566]  __netif_receive_skb_one_core+0x15d/0x1a0
[   11.441995]  process_backlog+0x1b1/0x6b0
[   11.443148]  net_rx_action+0x37e/0xc40
[   11.445361]  __do_softirq+0x18c/0x61a
[   11.445881]  asm_call_on_stack+0x12/0x20
[   11.446409]  </IRQ>
[   11.446716]  do_softirq_own_stack+0x34/0x40
[   11.447259]  do_softirq.part.0+0x26/0x30
[   11.447827]  __local_bh_enable_ip+0x46/0x50
[   11.448406]  ip_finish_output2+0x60f/0x1bc0
[   11.450109]  __ip_queue_xmit+0x71c/0x1b60
[   11.451861]  __tcp_transmit_skb+0x1727/0x3bb0
[   11.453789]  tcp_rcv_state_process+0x3070/0x4d3a
[   11.456810]  tcp_v4_do_rcv+0x2ad/0x780
[   11.457995]  __release_sock+0x14b/0x2c0
[   11.458529]  release_sock+0x4a/0x170
[   11.459005]  __inet_stream_connect+0x467/0xc80
[   11.461435]  inet_stream_connect+0x4e/0xa0
[   11.462043]  __sys_connect+0x204/0x270
[   11.465515]  __x64_sys_connect+0x6a/0xb0
[   11.466088]  do_syscall_64+0x3e/0x70
[   11.466617]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   11.467341] RIP: 0033:0x7f56046dc469
[   11.467844] Code: Bad RIP value.
[   11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[   11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469
[   11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004
[   11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000
[   11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003
[   11.474321]
[   11.474527] Allocated by task 4884:
[   11.475031]  save_stack+0x1b/0x40
[   11.475548]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   11.476182]  tcp_cdg_init+0xf0/0x150
[   11.476744]  tcp_init_congestion_control+0x9b/0x3a0
[   11.477435]  tcp_set_congestion_control+0x270/0x32f
[   11.478088]  do_tcp_setsockopt.isra.0+0x521/0x1a00
[   11.478744]  __sys_setsockopt+0xff/0x1e0
[   11.479259]  __x64_sys_setsockopt+0xb5/0x150
[   11.479895]  do_syscall_64+0x3e/0x70
[   11.480395]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   11.481097]
[   11.481321] Freed by task 4872:
[   11.481783]  save_stack+0x1b/0x40
[   11.482230]  __kasan_slab_free+0x12c/0x170
[   11.482839]  kfree+0x8c/0x230
[   11.483240]  tcp_cleanup_congestion_control+0x58/0xd0
[   11.483948]  tcp_v4_destroy_sock+0x57/0x5a0
[   11.484502]  inet_csk_destroy_sock+0x153/0x2c0
[   11.485144]  tcp_close+0x932/0xfe0
[   11.485642]  inet_release+0xc1/0x1c0
[   11.486131]  __sock_release+0xc0/0x270
[   11.486697]  sock_close+0xc/0x10
[   11.487145]  __fput+0x277/0x780
[   11.487632]  task_work_run+0xeb/0x180
[   11.488118]  __prepare_exit_to_usermode+0x15a/0x160
[   11.488834]  do_syscall_64+0x4a/0x70
[   11.489326]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Wei Wang fixed a part of these CDG-malloc issues with commit c1201444
("tcp: memset ca_priv data to 0 properly").

This patch here fixes the listener-scenario: We make sure that listeners
setting the congestion-control through setsockopt won't initialize it
(thus CDG never allocates on listeners). For those who use AF_UNSPEC to
reuse a socket, tcp_disconnect() is changed to cleanup afterwards.

(The issue can be reproduced at least down to v4.4.x.)

Cc: Wei Wang <weiwan@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 2b0a8c9e ("tcp: add CDG congestion control")
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out
without checking if we already have some messages in current skb like we do
with ethnl_default_dump_one() failure later. Therefore if existing messages
almost fill up the buffer so that there is not enough space even for
netlink and genetlink header, we lose all prepared messages and return and
error.

Rather than duplicating the skb->len check, move the genlmsg_put(),
genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one().
This is also more logical as all message composition will be in
ethnl_default_dump_one() and only iteration logic will be left in
ethnl_default_dumpit().

Fixes: 728480f1 ("ethtool: default handlers for GET requests")
Reported-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.

Fix this by moving the p->link.ref initialization before
tcf_block_get().

Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.

Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.

Fixes: 1ac4329a ("qed: Add configuration information to register dump and debug data")
Signed-off-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all-mask IP address to Big Endian, instead, for comparison.

Fixes: f286dd8e ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A scenario has been observed where a 'bc_init' message for a link is not
retransmitted if it fails to be received by the peer. This leads to the
peer never establishing the link fully and it discarding all other data
received on the link. In this scenario the message is lost in transit to
the peer.

The issue is traced to the 'nxt_retr' field of the skb not being
initialised for links that aren't a bc_sndlink. This leads to the
comparison in tipc_link_advance_transmq() that gates whether to attempt
retransmission of a message performing in an undesirable way.
Depending on the relative value of 'jiffies', this comparison:
    time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr)
may return true or false given that 'nxt_retr' remains at the
uninitialised value of 0 for non bc_sndlinks.

This is most noticeable shortly after boot when jiffies is initialised
to a high value (to flush out rollover bugs) and we compare a jiffies of,
say, 4294940189 to zero. In that case time_before returns 'true' leading
to the skb not being retransmitted.

The fix is to ensure that all skbs have a valid 'nxt_retr' time set for
them and this is achieved by refactoring the setting of this value into
a central function.
With this fix, transmission losses of 'bc_init' messages do not stall
the link establishment forever because the 'bc_init' message is
retransmitted and the link eventually establishes correctly.

Fixes: 382f598f ("tipc: reduce duplicate packets for unicast traffic")
Acked-by: NJon Maloy <jmaloy@redhat.com>
Signed-off-by: NHamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:

   skb_dst_set_noref(skb, dst);

without releasing the old dst in skb. Then it causes dst/dev refcnt leak:

  unregister_netdevice: waiting for eth0 to become free. Usage count = 1

This can be reproduced by simply running:

  # modprobe l2tp_eth && modprobe l2tp_ip
  # sh ./tools/testing/selftests/net/l2tp.sh

So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().

Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core")
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NJames Chapman <jchapman@katalix.com>
Tested-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: fixes 2020-07-08

Please apply the following patch series for smc to netdev's net tree.

The patches fix problems found during more testing of SMC
functionality, resulting in hang conditions and unneeded link
deactivations. The clc module was hardened to be prepared for
possible future SMCD versions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CLC proposal messages of future SMCD versions could be larger than SMCD
V1 CLC proposal messages.
To enable toleration in SMC V1 the receival of CLC proposal messages
is adapted:
* accept larger length values in CLC proposal
* check trailing eye catcher for incoming CLC proposal with V1 length only
* receive the whole CLC proposal even in cases it does not fit into the
  V1 buffer

Fixes: e7b7a64a ("smc: support variable CLC proposal messages")
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The similar smc_ib_devices spinlock has been converted to a mutex.
Protecting the smcd_dev_list by a mutex is possible as well. This
patch converts the smcd_dev_list spinlock to a mutex.

Fixes: c6ba7c9b ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tests showed this BUG:
[572555.252867] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
[572555.252876] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 131031, name: smcapp
[572555.252879] INFO: lockdep is turned off.
[572555.252883] CPU: 1 PID: 131031 Comm: smcapp Tainted: G           O      5.7.0-rc3uschi+ #356
[572555.252885] Hardware name: IBM 3906 M03 703 (LPAR)
[572555.252887] Call Trace:
[572555.252896]  [<00000000ac364554>] show_stack+0x94/0xe8
[572555.252901]  [<00000000aca1f400>] dump_stack+0xa0/0xe0
[572555.252906]  [<00000000ac3c8c10>] ___might_sleep+0x260/0x280
[572555.252910]  [<00000000acdc0c98>] __mutex_lock+0x48/0x940
[572555.252912]  [<00000000acdc15c2>] mutex_lock_nested+0x32/0x40
[572555.252975]  [<000003ff801762d0>] mlx5_lag_get_roce_netdev+0x30/0xc0 [mlx5_core]
[572555.252996]  [<000003ff801fb3aa>] mlx5_ib_get_netdev+0x3a/0xe0 [mlx5_ib]
[572555.253007]  [<000003ff80063848>] smc_pnet_find_roce_resource+0x1d8/0x310 [smc]
[572555.253011]  [<000003ff800602f0>] __smc_connect+0x1f0/0x3e0 [smc]
[572555.253015]  [<000003ff80060634>] smc_connect+0x154/0x190 [smc]
[572555.253022]  [<00000000acbed8d4>] __sys_connect+0x94/0xd0
[572555.253025]  [<00000000acbef620>] __s390x_sys_socketcall+0x170/0x360
[572555.253028]  [<00000000acdc6800>] system_call+0x298/0x2b8
[572555.253030] INFO: lockdep is turned off.

Function smc_pnet_find_rdma_dev() might be called from
smc_pnet_find_roce_resource(). It holds the smc_ib_devices list
spinlock while calling infiniband op get_netdev(). At least for mlx5
the get_netdev operation wants mutex serialization, which conflicts
with the smc_ib_devices spinlock.
This patch switches the smc_ib_devices spinlock into a mutex to
allow sleeping when calling get_netdev().

Fixes: a4cf0443 ("smc: introduce SMC as an IB-client")
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wait for pending sends only when smc_switch_conns() found a link to move
the connections to. Do not wait during link freeing, this can lead to
permanent hang situations. And refuse to provide a new tx slot on an
unusable link.

Fixes: c6f02ebe ("net/smc: switch connections to alternate link")
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There might be races in scenarios where both SMC link groups are on the
same system. Prevent that by creating separate wait queues for LLC flows
and messages. Switch to non-interruptable versions of wait_event() and
wake_up() for the llc flow waiter to make sure the waiters get control
sequentially. Fine tune the llc_flow_lock to include the assignment of
the message. Write to system log when an unexpected message was
dropped. And remove an extra indirection and use the existing local
variable lgr in smc_llc_enqueue().

Fixes: 555da9af ("net/smc: add event-based llc_flow framework")
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes ip dst and ipv6 address filters.
There were 2 mistakes in the code, which led to the issue:
* invalid register was used for ipv4 dst address;
* incorrect write order of dwords for ipv6 addresses.

Fixes: 23e7a718 ("net: aquantia: add rx-flow filter definitions")
Signed-off-by: NDmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: NMark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The queue reset pattern is used in a couple different places,
only slightly different from each other, and could cause
issues if one gets changed and the other didn't.  This puts
them together so that only one version is needed, yet each
can have slighty different effects by passing in a pointer
to a work function to do whatever configuration twiddling is
needed in the middle of the reset.

This specifically addresses issues seen where under loops
of changing ring size or queue count parameters we could
occasionally bump into the netdev watchdog.

v2: added more commit message commentary

Fixes: 4d03e00a ("ionic: Add initial ethtool support")
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.

Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.

v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)
Reported-by: NToshiaki Makita <toshiaki.makita1@gmail.com>
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Fixes: d7bf2ebe ("sched: consistently handle layer3 header accesses in the presence of VLANs")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When generating debug dump, driver firstly collects all data in binary
form, and then performs per-feature formatting to human-readable if it
is supported.

For ethtool -d, this is roughly incorrect for two reasons. First of all,
drivers should always provide only original raw dumps to Ethtool without
any changes.
The second, and more critical, is that Ethtool's output buffer size is
strictly determined by ethtool_ops::get_regs_len(), and all data *must*
fit in it. The current version of driver always returns the size of raw
data, but the size of the formatted buffer exceeds it in most cases.
This leads to out-of-bound writes and memory corruption.

Address both issues by adding an option to return original, non-formatted
debug data, and using it for Ethtool case.

v2:
 - Expand commit message to make it more clear;
 - No functional changes.

Fixes: c965db44 ("qed: Add support for debug data collection")
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e57f6185 ("net: bridge: mcast: fix stale nsrcs pointer in
igmp3/mld2 report handling") introduced a bug in the IPv6 header payload
length check which would potentially lead to rejecting a valid MLD2 Report:

The check needs to take into account the 2 bytes for the "Number of
Sources" field in the "Multicast Address Record" before reading it.
And not the size of a pointer to this field.

Fixes: e57f6185 ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling")
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The packets from tunnel devices (eg bareudp) may have only
metadata in the dst pointer of skb. Hence a pointer check of
neigh_lookup is needed in dst_neigh_lookup_skb

Kernel crashes when packets from bareudp device is processed in
the kernel neighbour subsytem.

[  133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  133.385240] #PF: supervisor instruction fetch in kernel mode
[  133.385828] #PF: error_code(0x0010) - not-present page
[  133.386603] PGD 0 P4D 0
[  133.386875] Oops: 0010 [#1] SMP PTI
[  133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G        W         5.8.0-rc2+ #15
[  133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  133.391076] RIP: 0010:0x0
[  133.392401] Code: Bad RIP value.
[  133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.401667] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.402412] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.404933] Call Trace:
[  133.405169]  <IRQ>
[  133.405367]  __neigh_update+0x5a4/0x8f0
[  133.405734]  arp_process+0x294/0x820
[  133.406076]  ? __netif_receive_skb_core+0x866/0xe70
[  133.406557]  arp_rcv+0x129/0x1c0
[  133.406882]  __netif_receive_skb_one_core+0x95/0xb0
[  133.407340]  process_backlog+0xa7/0x150
[  133.407705]  net_rx_action+0x2af/0x420
[  133.408457]  __do_softirq+0xda/0x2a8
[  133.408813]  asm_call_on_stack+0x12/0x20
[  133.409290]  </IRQ>
[  133.409519]  do_softirq_own_stack+0x39/0x50
[  133.410036]  do_softirq+0x50/0x60
[  133.410401]  __local_bh_enable_ip+0x50/0x60
[  133.410871]  ip_finish_output2+0x195/0x530
[  133.411288]  ip_output+0x72/0xf0
[  133.411673]  ? __ip_finish_output+0x1f0/0x1f0
[  133.412122]  ip_send_skb+0x15/0x40
[  133.412471]  raw_sendmsg+0x853/0xab0
[  133.412855]  ? insert_pfn+0xfe/0x270
[  133.413827]  ? vvar_fault+0xec/0x190
[  133.414772]  sock_sendmsg+0x57/0x80
[  133.415685]  __sys_sendto+0xdc/0x160
[  133.416605]  ? syscall_trace_enter+0x1d4/0x2b0
[  133.417679]  ? __audit_syscall_exit+0x1d9/0x280
[  133.418753]  ? __prepare_exit_to_usermode+0x5d/0x1a0
[  133.419819]  __x64_sys_sendto+0x24/0x30
[  133.420848]  do_syscall_64+0x4d/0x90
[  133.421768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  133.422833] RIP: 0033:0x7fe013689c03
[  133.423749] Code: Bad RIP value.
[  133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03
[  133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003
[  133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010
[  133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[  133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080
[  133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod
[  133.444045] CR2: 0000000000000000
[  133.445082] ---[ end trace f4aeee1958fd1638 ]---
[  133.446236] RIP: 0010:0x0
[  133.447180] Code: Bad RIP value.
[  133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.456520] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.458046] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.463697] Kernel panic - not syncing: Fatal exception in interrupt
[  133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: aaa0c23c ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug")
Signed-off-by: NMartin Varghese <martin.varghese@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update

filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
  eth_type ipv4
  dst_ip 1.1.1.1
  ip_flags frag/firstfrag
  skip_hw
  not_in_hw
 action order 1: ct zone 1 nat pipe
  index 1 ref 1 bind 1 installed 103 sec used 103 sec
 Action statistics:
 Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
 backlog 0b 0p requeues 0
 cookie 4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: Nwenxu <wenxu@ucloud.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. Including it directly will break the RT build.

Fixes: 549c243e ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The RFC 8684 mandates that no-data DATA FIN packets should carry
a DSS with 0 sequence number and data len equal to 1. Currently,
on FIN retransmission we re-use the existing mapping; if the previous
fin transmission was part of a partially acked data packet, we could
end-up writing in the egress packet a non-compliant DSS.

The above will be detected by a "Bad mapping" warning on the receiver
side.

This change addresses the issue explicitly checking for 0 len packet
when adding the DATA_FIN option.

Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com
Tested-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.

Expected output of "ip xfrm monitor":
    acquire proto esp
      sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
      policy src 10.0.2.15/32 dst 8.8.8.8/32
        <snip>

Currently with ping sockets:
    acquire proto esp
      sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
      policy src 10.0.2.15/32 dst 8.8.8.8/32
        <snip>

The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.

Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: NPaul Wouters <pwouters@redhat.com>
Tested-by: NPaul Wouters <pwouters@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the ISR, we poll the event register for the queues in need of
service and then enter polled mode. After this point, the event
register will never be read again until we exit polled mode.

In a scenario where a UDP flow is routed back out through the same
interface, i.e. "router-on-a-stick" we'll typically only see an rx
queue event initially. Once we start to process the incoming flow
we'll be locked polled mode, but we'll never clean the tx rings since
that event is never caught.

Eventually the netdev watchdog will trip, causing all buffers to be
dropped and then the process starts over again.

Rework the NAPI poll to keep trying to consome the entire budget as
long as new events are coming in, making sure to service all rx/tx
queues, in priority order, on each pass.

Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue")
Signed-off-by: NTobias Waldekranz <tobias@waldekranz.com>
Tested-by: NFugang Duan <fugang.duan@nxp.com>
Reviewed-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: NTom Rix <trix@redhat.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.

sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.

The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.

This bug seems to be introduced since the beginning, commit
d979a39d ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b2
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.

Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: NCameron Berkenpas <cam@neo-zeon.de>
Reported-by: NPeter Geis <pgwipeout@gmail.com>
Reported-by: NLu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: NDaniël Sonck <dsonck92@gmail.com>
Reported-by: NZhang Qiang <qiang.zhang@windriver.com>
Tested-by: NCameron Berkenpas <cam@neo-zeon.de>
Tested-by: NPeter Geis <pgwipeout@gmail.com>
Tested-by: NThomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas reported a regression with IPv6 and anycast using the following
reproducer:

    echo 1 >  /proc/sys/net/ipv6/conf/all/forwarding
    ip -6 a add fc12::1/16 dev lo
    sleep 2
    echo "pinging lo"
    ping6 -c 2 fc12::

The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.

Fixes: c7a1ce39 ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: fix warning-reported errors

Building the kernel with W=1 produces numerous warnings for the IPA
code.  Some of those warnings turn out to flag real problems, and
this series fixes them.  The first patch fixes the most important
ones, but the second and third are problems I think are worth
treating as bugs as well.

Note:  I'll happily combine any of these if someone prefers that.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are
defined before they are used in "ipa_gsi.c".  This addresses some
warnings that are reported with a "W=1" build.

Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI")
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pointers to two struct types are used in "ipa_gsi.h", without those
struct types being forward-declared.  Add these declarations.

Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI")
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Building with "W=1" did exactly what it was supposed to do, namely
point out some suspicious-looking code to be verified not to contain
bugs.

Some QMI message structures defined in "ipa_qmi_msg.c" contained
some bad field names (duplicating the "elem_size" field instead of
defining the "offset" field), almost certainly due to copy/paste
errors that weren't obvious in a scan of the code.  Fix these bugs.

Fixes: 530f9216 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>