Update documenting comments to reflect code changes over the past
year.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Avoid the latency and interrupt overhead of registering a Write
chunk when handling NFS READ requests of a few hundred bytes or
less.

This change does not interoperate with Linux NFS/RDMA servers
that do not have commit 9d11b51c ('svcrdma: Fix send_reply()
scatter/gather set-up'). Commit 9d11b51c was introduced in v4.3,
and is included in 4.2.y, 4.1.y, and 3.18.y.

Oracle bug 22925946 has been filed to request that the above fix
be included in the Oracle Linux UEK4 NFS/RDMA server.

Red Hat bugzillas 1327280 and 1327554 have been filed to request
that RHEL NFS/RDMA server backports include the above fix.

Workaround: Replace the "proto=rdma,port=20049" mount options
with "proto=tcp" until commit 9d11b51c is applied to your
NFS server.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

When deciding whether to send a Call inline, rpcrdma_marshal_req
doesn't take into account header bytes consumed by chunk lists.
This results in Call messages on the wire that are sometimes larger
than the inline threshold.

Likewise, when a Write list or Reply chunk is in play, the server's
reply has to emit an RDMA Send that includes a larger-than-minimal
RPC-over-RDMA header.

The actual size of a Call message cannot be estimated until after
the chunk lists have been registered. Thus the size of each
RPC-over-RDMA header can be estimated only after chunks are
registered; but the decision to register chunks is based on the size
of that header. Chicken, meet egg.

The best a client can do is estimate header size based on the
largest header that might occur, and then ensure that inline content
is always smaller than that.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Send buffer space is shared between the RPC-over-RDMA header and
an RPC message. A large RPC-over-RDMA header means less space is
available for the associated RPC message, which then has to be
moved via an RDMA Read or Write.

As more segments are added to the chunk lists, the header increases
in size.  Typical modern hardware needs only a few segments to
convey the maximum payload size, but some devices and registration
modes may need a lot of segments to convey data payload. Sometimes
so many are needed that the remaining space in the Send buffer is
not enough for the RPC message. Sending such a message usually
fails.

To ensure a transport can always make forward progress, cap the
number of RDMA segments that are allowed in chunk lists. This
prevents less-capable devices and memory registrations from
consuming a large portion of the Send buffer by reducing the
maximum data payload that can be conveyed with such devices.

For now I choose an arbitrary maximum of 8 RDMA segments. This
allows a maximum size RPC-over-RDMA header to fit nicely in the
current 1024 byte inline threshold with over 700 bytes remaining
for an inline RPC message.

The current maximum data payload of NFS READ or WRITE requests is
one megabyte. To convey that payload on a client with 4KB pages,
each chunk segment would need to handle 32 or more data pages. This
is well within the capabilities of FMR. For physical registration,
the maximum payload size on platforms with 4KB pages is reduced to
32KB.

For FRWR, a device's maximum page list depth would need to be at
least 34 to support the maximum 1MB payload. A device with a smaller
maximum page list depth means the maximum data payload is reduced
when using that device.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Currently the sysctls that allow setting the inline threshold allow
any value to be set.

Small values only make the transport run slower. The default 1KB
setting is as low as is reasonable. And the logic that decides how
to divide a Send buffer between RPC-over-RDMA header and RPC message
assumes (but does not check) that the lower bound is not crazy (say,
57 bytes).

Send and receive buffers share a page with some control information.
Values larger than about 3KB can't be supported, currently.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

RPC-over-RDMA transports have a limit on how large a backward
direction (backchannel) RPC message can be. Ensure that the NFSv4.x
CREATE_SESSION operation advertises this limit to servers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Commit 176e21ee ("SUNRPC: Support for RPC over AF_LOCAL
transports") added a 5-character netid, but did not bump
RPCBIND_MAXNETIDLEN from 4 to 5.

Fixes: 176e21ee ("SUNRPC: Support for RPC over AF_LOCAL ...")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

RFC 5666: The "rdma" netid is to be used when IPv4 addressing
is employed by the underlying transport, and "rdma6" for IPv6
addressing.

Add mount -o proto=rdma6 option to support NFS/RDMA IPv6 addressing.

Changes from v2:
 - Integrated comments from Chuck Level, Anna Schumaker, Trodt Myklebust
 - Add a little more to the patch description to describe NFS/RDMA
   IPv6 suggested by Chuck Level and Anna Schumaker
 - Removed duplicated rdma6 define
 - Remove Opt_xprt_rdma mountfamily since it doesn't support
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

OPEN_CREATE with EXCLUSIVE4_1 sends initial file permission.
Ignoring  fact, that server have indicated that file mod is set, client
will send yet another SETATTR request, but, as mode is already set,
new SETATTR will be empty. This is not a problem, nevertheless
an extra roundtrip and slow open on high latency networks.

This change is aims to skip extra setattr after open  if there are
no attributes to be set.
Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This adds the copy_range file_ops function pointer used by the
sys_copy_range() function call.  This patch only implements sync copies,
so if an async copy happens we decode the stateid and ignore it.
Signed-off-by: NAnna Schumaker <bjschuma@netapp.com>

Copy will use this to set up a commit request for a generic range.  I
don't want to allocate a new pagecache entry for the file, so I needed
to change parts of the commit path to handle requests with a null
wb_page.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Commit 80f96427 ("NFSv4.x: Enforce the ca_maxreponsesize_cached
on the back channel") causes an oops when it receives a callback with
cachethis=yes.

[  109.667378] BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8
[  109.669476] IP: [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.671216] PGD 0
[  109.671736] Oops: 0000 [#1] SMP
[  109.705427] CPU: 1 PID: 3579 Comm: nfsv4.1-svc Not tainted 4.5.0-rc1+ #1
[  109.706987] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[  109.709468] task: ffff8800b4408000 ti: ffff88008448c000 task.ti: ffff88008448c000
[  109.711207] RIP: 0010:[<ffffffffa08a3e68>]  [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.713521] RSP: 0018:ffff88008448fca0  EFLAGS: 00010286
[  109.714762] RAX: ffff880081ee202c RBX: ffff8800b7b5b600 RCX: 0000000000000001
[  109.716427] RDX: 0000000000000008 RSI: 0000000000000008 RDI: 0000000000000000
[  109.718091] RBP: ffff88008448fda8 R08: 0000000000000000 R09: 000000000b000000
[  109.719757] R10: ffff880137786000 R11: ffff8800b7b5b600 R12: 0000000001000000
[  109.721415] R13: 0000000000000002 R14: 0000000053270000 R15: 000000000000000b
[  109.723061] FS:  0000000000000000(0000) GS:ffff880139640000(0000) knlGS:0000000000000000
[  109.724931] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.726278] CR2: 00000000000002c8 CR3: 0000000034d50000 CR4: 00000000001406e0
[  109.727972] Stack:
[  109.728465]  ffff880081ee202c ffff880081ee201c 000000008448fcc0 ffff8800baccb800
[  109.730349]  ffff8800baccc800 ffffffffa08d0380 0000000000000000 0000000000000000
[  109.732211]  ffff8800b7b5b600 0000000000000001 ffffffff81d073c0 ffff880081ee3090
[  109.734056] Call Trace:
[  109.734657]  [<ffffffffa03795d4>] svc_process_common+0x5c4/0x6c0 [sunrpc]
[  109.736267]  [<ffffffffa0379a4c>] bc_svc_process+0x1fc/0x360 [sunrpc]
[  109.737775]  [<ffffffffa08a2c2c>] nfs41_callback_svc+0x10c/0x1d0 [nfsv4]
[  109.739335]  [<ffffffff810cb380>] ? prepare_to_wait_event+0xf0/0xf0
[  109.740799]  [<ffffffffa08a2b20>] ? nfs4_callback_svc+0x50/0x50 [nfsv4]
[  109.742349]  [<ffffffff810a6998>] kthread+0xd8/0xf0
[  109.743495]  [<ffffffff810a68c0>] ? kthread_park+0x60/0x60
[  109.744776]  [<ffffffff816abc4f>] ret_from_fork+0x3f/0x70
[  109.746037]  [<ffffffff810a68c0>] ? kthread_park+0x60/0x60
[  109.747324] Code: cc 45 31 f6 48 8b 85 00 ff ff ff 44 89 30 48 8b 85 f8 fe ff ff 44 89 20 48 8b 9d 38 ff ff ff 48 8b bd 30 ff ff ff 48 85 db 74 4c <4c> 8b af c8 02 00 00 4d 8d a5 08 02 00 00 49 81 c5 98 02 00 00
[  109.754361] RIP  [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4]
[  109.756123]  RSP <ffff88008448fca0>
[  109.756951] CR2: 00000000000002c8
[  109.757738] ---[ end trace 2b8555511ab5dfb4 ]---
[  109.758819] Kernel panic - not syncing: Fatal exception
[  109.760126] Kernel Offset: disabled
[  118.938934] ---[ end Kernel panic - not syncing: Fatal exception

It doesn't unlock the table nor does it set the cps->clp pointer which
is later needed by nfs4_cb_free_slot().

Fixes: 80f96427 ("NFSv4.x: Enforce the ca_maxresponsesize_cached ...")
CC: stable@vger.kernel.org
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There's no guarantee that an IP address in a different network namespace
actually represents the same endpoint.

Also, if we allow unprivileged nfs mounts some day then this might allow
an unprivileged user in another network namespace to misdirect somebody
else's nfs mounts.

If sharing between containers is really what's wanted then that could
still be arranged explicitly, for example with bind mounts.
Reported-by: N"Eric W. Biederman" <ebiederm@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

At Connectathon 2016, we found that recent upstream Linux clients
would occasionally send a LOCK operation with a zero stateid. This
appeared to happen in close proximity to another thread returning
a delegation before unlinking the same file while it remained open.

Earlier, the client received a write delegation on this file and
returned the open stateid. Now, as it is getting ready to unlink the
file, it returns the write delegation. But there is still an open
file descriptor on that file, so the client must OPEN the file
again before it returns the delegation.

Since commit 24311f88 ('NFSv4: Recovery of recalled read
delegations is broken'), nfs_open_delegation_recall() clears the
NFS_DELEGATED_STATE flag _before_ it sends the OPEN. This allows a
racing LOCK on the same inode to be put on the wire before the OPEN
operation has returned a valid open stateid.

To eliminate this race, serialize delegation return with the
acquisition of a file lock on the same file. Adopt the same approach
as is used in the unlock path.

This patch also eliminates a similar race seen when sending a LOCK
operation at the same time as returning a delegation on the same file.

Fixes: 24311f88 ('NFSv4: Recovery of recalled read ... ')
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
[Anna: Add sentence about LOCK / delegation race]
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

A mirror can be shared between multiple layouts, even with different
iomodes. That makes stats gathering simpler, but it causes a problem
when we get different creds in READ vs. RW layouts.

The current code drops the newer credentials onto the floor when this
occurs. That's problematic when you fetch a READ layout first, and then
a RW. If the READ layout doesn't have the correct creds to do a write,
then writes will fail.

We could just overwrite the READ credentials with the RW ones, but that
would break the ability for the server to fence the layout for reads if
things go awry. We need to be able to revert to the earlier READ creds
if the RW layout is returned afterward.

The simplest fix is to just keep two sets of creds per mirror. One for
READ layouts and one for RW, and then use the appropriate set depending
on the iomode of the layout segment.

Also fix up some RCU nits that sparse found.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

We're just as likely to have allocation problems here as we would if we
delay looking up the credential like we currently do. Fix the code to
get a rpc_cred reference early, as soon as the mirror is set up.

This allows us to eliminate the mirror early if there is a problem
getting an rpc credential. This also allows us to drop the uid/gid
from the layout_mirror struct as well.

In the event that we find an existing mirror where this one would go, we
swap in the new creds unconditionally, and drop the reference to the old
one.

Note that the old ff_layout_update_mirror_cred function wouldn't set
this pointer unless the DS version was 3, but we don't know what the DS
version is at this point. I'm a little unclear on why it did that as you
still need creds to talk to v4 servers as well. I have the code set
it regardless of the DS version here.

Also note the change to using generic creds instead of calling
lookup_cred directly. With that change, we also need to populate the
group_info pointer in the acred as some functions expect that to never
be NULL. Instead of allocating one every time however, we can allocate
one when the module is loaded and share it since the group_info is
refcounted.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In later patches, we're going to want to allow the creds to be updated
when we get a new layout with updated creds. Have this function take
a reference to the cred that is later put once the call has been
dispatched.

Also, prepare for this change by ensuring we follow RCU rules when
getting a reference to the cred as well.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

All the callers already call that function before calling into here,
so it ends up being a no-op anyway.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Sometimes we might have a RCU managed credential pointer and don't want
to use locking to handle it. Add a function that will take a reference
to the cred iff the refcount is not already zero. Callers can dereference
the pointer under the rcu_read_lock and use that function to take a
reference only if the cred is not on its way to destruction.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Add function rpc_lookup_generic_cred, which allows lookups of a generic
credential that's not current_cred().

[jlayton: add gfp_t parm]
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

We need to be able to call the generic_cred creator from different
contexts. Add a gfp_t parm to the crcreate operation and to
rpcauth_lookup_credcache. For now, we just push the gfp_t parms up
one level to the *_lookup_cred functions.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

An xdr_buf with head[0].iov_len = 0 and page_len = 0 will cause
xdr_init_decode() to incorrectly setup the xdr_stream.  Specifically,
xdr->end is never initialized.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Commit ea2cf228 created nfs_commit_info and saved &inode->i_lock inside
this NFS specific structure.  This obscures the usage of i_lock.
Instead, save struct inode * so later it's clear the spinlock taken is
i_lock.

Should be no functional change.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This will pop a warning if we count too many good bytes.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Like other resend paths, mark the (old) hdr as NFS_IOHDR_REDO. This
ensures the hdr completion function will not count the (old) hdr
as good bytes.

Also, vector the error back through the hdr->task.tk_status like other
retry calls.

This fixes a bug with the FlexFiles layout where libaio was reporting more
bytes read than requested.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Pull misc driver fixes from Gfreg KH:
 "Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Pull IIO driver fixes from Grek KH:
 "It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Pull USB fixes from Greg KH:
 "Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Pull rdma fix from Doug Ledford:
 "Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/iser: Fix max_sectors calculation

Pull writeback fix from Jens Axboe:
 "Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull x86 fixes from Ingo Molnar:
 "This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

Pull scheduler fix from Ingo Molnar:
 "This contains a single fix that fixes a nohz tick stopping bug when
  mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

Pull perf fixes from Ingo Molnar:
 "This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

Pull EFI fixes from Ingo Molnar:
 "This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

Pull parisc fix from Helge Deller:
 "Patch from Dmitry V Levin to fix a kernel crash when a straced process
  calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls