- 29 8月, 2019 10 次提交
-
-
由 Willem de Bruijn 提交于
TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765 ("net-timestamp: TCP timestamping") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Justin Pettit 提交于
Only the first fragment in a datagram contains the L4 headers. When the Open vSwitch module parses a packet, it always sets the IP protocol field in the key, but can only set the L4 fields on the first fragment. The original behavior would not clear the L4 portion of the key, so garbage values would be sent in the key for "later" fragments. This patch clears the L4 fields in that circumstance to prevent sending those garbage values as part of the upcall. Signed-off-by: NJustin Pettit <jpettit@ovn.org> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Rose 提交于
When IP fragments are reassembled before being sent to conntrack, the key from the last fragment is used. Unless there are reordering issues, the last fragment received will not contain the L4 ports, so the key for the reassembled datagram won't contain them. This patch updates the key once we have a reassembled datagram. The handle_fragments() function works on L3 headers so we pull the L3/L4 flow key update code from key_extract into a new function 'key_extract_l3l4'. Then we add a another new function ovs_flow_key_update_l3l4() and export it so that it is accessible by handle_fragments() for conntrack packet reassembly. Co-authored-by: NJustin Pettit <jpettit@ovn.org> Signed-off-by: NGreg Rose <gvrose8192@gmail.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Similar to the fix done for IPv4 in commit e5b1c6c6 ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu counters are present when 'reset()' is called for pfifo_fast qdiscs. Otherwise, the following script: # tc q a dev lo handle 1: root htb default 100 # tc c a dev lo parent 1: classid 1:100 htb \ > rate 95Mbit ceil 100Mbit burst 64k [...] # tc f a dev lo parent 1: protocol arp basic classid 1:100 [...] # tc q a dev lo parent 1:100 handle 100: pfifo_fast [...] # tc q d dev lo root can generate the following splat: Unable to handle kernel paging request at virtual address dfff2c01bd148000 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfff2c01bd148000] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP [...] pstate: 80000005 (Nzcv daif -PAN -UAO) pc : pfifo_fast_reset+0x280/0x4d8 lr : pfifo_fast_reset+0x21c/0x4d8 sp : ffff800d09676fa0 x29: ffff800d09676fa0 x28: ffff200012ee22e4 x27: dfff200000000000 x26: 0000000000000000 x25: ffff800ca0799958 x24: ffff1001940f332b x23: 0000000000000007 x22: ffff200012ee1ab8 x21: 0000600de8a40000 x20: 0000000000000000 x19: ffff800ca0799900 x18: 0000000000000000 x17: 0000000000000002 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff1001b922e6e2 x11: 1ffff001b922e6e1 x10: 0000000000000000 x9 : 1ffff001b922e6e1 x8 : dfff200000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 1fffe400025dc45c x4 : 1fffe400025dc357 x3 : 00000c01bd148000 x2 : 0000600de8a40000 x1 : 0000000000000007 x0 : 0000600de8a40004 Call trace: pfifo_fast_reset+0x280/0x4d8 qdisc_reset+0x6c/0x370 htb_reset+0x150/0x3b8 [sch_htb] qdisc_reset+0x6c/0x370 dev_deactivate_queue.constprop.5+0xe0/0x1a8 dev_deactivate_many+0xd8/0x908 dev_deactivate+0xe4/0x190 qdisc_graft+0x88c/0xbd0 tc_get_qdisc+0x418/0x8a8 rtnetlink_rcv_msg+0x3a8/0xa78 netlink_rcv_skb+0x18c/0x328 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x3c4/0x538 netlink_sendmsg+0x538/0x9a0 sock_sendmsg+0xac/0xf8 ___sys_sendmsg+0x53c/0x658 __sys_sendmsg+0xc8/0x140 __arm64_sys_sendmsg+0x74/0xa8 el0_svc_handler+0x164/0x468 el0_svc+0x10/0x14 Code: 910012a0 92400801 d343fc03 11000c21 (38fb6863) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Changes since v1: - coding style improvements, thanks to Stefano Brivio Fixes: 8a53e616 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> Reported-by: NLi Shuang <shuali@redhat.com> Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yash Shah says: ==================== macb: Update ethernet compatible string for SiFive FU540 This patch series renames the compatible property to a more appropriate string. The patchset is based on Linux-5.3-rc6 and tested on SiFive Unleashed board Change history: Since v1: - Dropped PATCH3 because it's already merged - Change the reference url in the patch descriptions to point to a 'lore.kernel.org' link instead of 'lkml.org' ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yash Shah 提交于
Update the compatibility string for SiFive FU540-C000 as per the new string updated in the binding doc. Reference: https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/Signed-off-by: NYash Shah <yash.shah@sifive.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: NPaul Walmsley <paul.walmsley@sifive.com> Tested-by: NPaul Walmsley <paul.walmsley@sifive.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yash Shah 提交于
As per the discussion with Nicolas Ferre[0], rename the compatible property to a more appropriate and specific string. [0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/Signed-off-by: NYash Shah <yash.shah@sifive.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: NPaul Walmsley <paul.walmsley@sifive.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2019 11 次提交
-
-
由 Eric Dumazet 提交于
Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: NVladimir Rutsky <rutsky@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ka-Cheong Poon 提交于
The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb45036 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support") Reported-by: N黄ID蝴蝶 <butterflyhuangxx@gmail.com> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NKa-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Feng Sun 提交于
After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by: NFeng Sun <loyou85@gmail.com> Signed-off-by: NXiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
After witnessing the discussion in https://lkml.org/lkml/2019/8/14/151 w.r.t. ioctl extensibility, it became clear that such an issue might prevent that the 3 RSV bits inside the DSA 802.1Q tag might also suffer the same fate and be useless for further extension. So clearly specify that the reserved bits should currently be transmitted as zero and ignored on receive. The DSA tagger already does this (and has always did), and is the only known user so far (no Wireshark dissection plugin, etc). So there should be no incompatibility to speak of. Fixes: 0471dd42 ("net: dsa: tag_8021q: Create a stable binary format") Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marco Hartmann 提交于
Commit 34786005 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e82 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by: NMarco Hartmann <marco.hartmann@nxp.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix a page lock leak in nfs_pageio_resend() - Ensure O_DIRECT reports an error if the bytes read/written is 0 - Don't handle errors if the bind/connect succeeded - Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidat ed" Bugfixes: - Don't refresh attributes with mounted-on-file information - Fix return values for nfs4_file_open() and nfs_finish_open() - Fix pnfs layoutstats reporting of I/O errors - Don't use soft RPC calls for pNFS/flexfiles I/O, and don't abort for soft I/O errors when the user specifies a hard mount. - Various fixes to the error handling in sunrpc - Don't report writepage()/writepages() errors twice" * tag 'nfs-for-5.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: remove set but not used variable 'mapping' NFSv2: Fix write regression NFSv2: Fix eof handling NFS: Fix writepage(s) error handling to not report errors twice NFS: Fix spurious EIO read errors pNFS/flexfiles: Don't time out requests on hard mounts SUNRPC: Handle connection breakages correctly in call_status() Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated" SUNRPC: Handle EADDRINUSE and ENOBUFS correctly pNFS/flexfiles: Turn off soft RPC calls SUNRPC: Don't handle errors if the bind/connect succeeded NFS: On fatal writeback errors, we need to call nfs_inode_remove_request() NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0 NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend() NFSv4: Fix return value in nfs_finish_open() NFSv4: Fix return values for nfs4_file_open() NFS: Don't refresh attributes with mounted-on-file information
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: - support for Edge Triggered IRQs in ARC IDU intc - other fixes here and there * tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: prefer __section from compiler_attributes.h dt-bindings: IDU-intc: Add support for edge-triggered interrupts dt-bindings: IDU-intc: Clean up documentation ARCv2: IDU-intc: Add support for edge-triggered interrupts ARC: unwind: Mark expected switch fall-throughs ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations ARC: fix typo in setup_dma_ops log message ARCv2: entry: early return from exception need not clear U & DE bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD fix from Lee Jones: "Identify potentially unused functions in rk808 driver when !PM" * tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rk808: Make PM function declaration static mfd: rk808: Mark pm functions __maybe_unused
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes as usual: - More coverage of USB-audio descriptor sanity checks - A fix for mute LED regression on Conexant HD-audio codecs - A few device-specific fixes and quirks for USB-audio and HD-audio - A fix for (die-hard remaining) possible race in sequencer core - FireWire oxfw regression fix that was introduced in 5.3-rc1" * tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: oxfw: fix to handle correct stream for PCM playback ALSA: seq: Fix potential concurrent access to the deleted pool ALSA: usb-audio: Check mixer unit bitmap yet more strictly ALSA: line6: Fix memory leak at line6_init_pcm() error path ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate() ALSA: hda/ca0132 - Add new SBZ quirk ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604 ALSA: hda - Fixes inverted Conexant GPIO mic mute led
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya Leoshkevich. 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for SMC from Jason Baron. 3) ipv6_mc_may_pull() should return 0 for malformed packets, not -EINVAL. From Stefano Brivio. 4) Don't forget to unpin umem xdp pages in error path of xdp_umem_reg(). From Ivan Khoronzhuk. 5) Fix sta object leak in mac80211, from Johannes Berg. 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2 switches. From Florian Fainelli. 7) Revert DMA sync removal from r8169 which was causing regressions on some MIPS Loongson platforms. From Heiner Kallweit. 8) Use after free in flow dissector, from Jakub Sitnicki. 9) Fix NULL derefs of net devices during ICMP processing across collect_md tunnels, from Hangbin Liu. 10) proto_register() memory leaks, from Zhang Lin. 11) Set NLM_F_MULTI flag in multipart netlink messages consistently, from John Fastabend. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) r8152: Set memory to all 0xFFs on failed reg reads openvswitch: Fix conntrack cache with timeout ipv4: mpls: fix mpls_xmit for iptunnel nexthop: Fix nexthop_num_path for blackhole nexthops net: rds: add service level support in rds-info net: route dump netlink NLM_F_MULTI flag missing s390/qeth: reject oversized SNMP requests sock: fix potential memory leak in proto_register() MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode ipv4/icmp: fix rt dst dev null pointer dereference openvswitch: Fix log message in ovs conntrack bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0 bpf: fix use after free in prog symbol exposure bpf: fix precision tracking in presence of bpf2bpf calls flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH Revert "r8169: remove not needed call to dma_sync_single_for_device" ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev net/ncsi: Fix the payload copying for the request coming from Netlink qed: Add cleanup in qed_slowpath_start() ...
-
- 27 8月, 2019 17 次提交
-
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: fs/nfs/write.c: In function nfs_page_async_flush: fs/nfs/write.c:609:24: warning: variable mapping set but not used [-Wunused-but-set-variable] It is not use since commit aefb623c422e ("NFS: Fix writepage(s) error handling to not report errors twice") Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
Ensure we update the write result count on success, since the RPC call itself does not do so. Reported-by: NJan Stancek <jstancek@redhat.com> Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Tested-by: NJan Stancek <jstancek@redhat.com>
-
由 Trond Myklebust 提交于
If we received a reply from the server with a zero length read and no error, then that implies we are at eof. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Lee Jones 提交于
Avoids: ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \ was not declared. Should it be static? Fixes: 5752bc43 ("mfd: rk808: Mark pm functions __maybe_unused") Reviewed-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Arnd Bergmann 提交于
The newly added suspend/resume functions are only used if CONFIG_PM is enabled: drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function] drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them when they are not needed. Fixes: 586c1b41 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Trond Myklebust 提交于
If writepage()/writepages() saw an error, but handled it without reporting it, we should not be re-reporting that error on exit. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
If the client attempts to read a page, but the read fails due to some spurious error (e.g. an ACCESS error or a timeout, ...) then we need to allow other processes to retry. Also try to report errors correctly when doing a synchronous readpage. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
If the mount is hard, we should ignore the 'io_maxretrans' module parameter so that we always keep retrying. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
If the connection breaks while we're waiting for a reply from the server, then we want to immediately try to reconnect. Fixes: ec6017d9 ("SUNRPC fix regression in umount of a secure mount") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
This reverts commit a79f194a. The mechanism for aborting I/O is racy, since we are not guaranteed that the request is asleep while we're changing both task->tk_status and task->tk_action. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v5.1
-
由 Trond Myklebust 提交于
If a connect or bind attempt returns EADDRINUSE, that means we want to retry with a different port. It is not a fatal connection error. Similarly, ENOBUFS is not fatal, but just indicates a memory allocation issue. Retry after a short delay. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
The pNFS/flexfiles I/O requests are sent with the SOFTCONN flag set, so they automatically time out if the connection breaks. It should therefore not be necessary to have the soft flag set in addition. Fixes: 5f01d953 ("nfs41: create NFSv3 DS connection if specified") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
Don't handle errors in call_bind_status()/call_connect_status() if it turns out that a previous call caused it to succeed. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v5.1+
-
由 Nick Desaulniers 提交于
Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Suggested-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Mischa Jonker 提交于
This updates the documentation for supporting an optional extra interrupt cell to specify edge vs level triggered. Signed-off-by: NMischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Mischa Jonker 提交于
* Some lines exceeded 80 characters. * Clarified statement about AUX register interface Signed-off-by: NMischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Mischa Jonker 提交于
This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: NMischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
- 26 8月, 2019 2 次提交
-
-
由 Takashi Sakamoto 提交于
When userspace application calls ioctl(2) to configure hardware for PCM playback substream, ALSA OXFW driver handles incoming AMDTP stream. In this case, outgoing AMDTP stream should be handled. This commit fixes the bug for v5.3-rc kernel. Fixes: 4f380d00 ("ALSA: oxfw: configure packet format in pcm.hw_params callback") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Prashant Malani 提交于
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by: NPrashant Malani <pmalani@chromium.org> Acked-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-