Remove empty/bogus #else from signal_64.c
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Most of the platforms were printing the size of the memory
in their show_cpuinfo implementations. This moves that to
the common show_cpuinfo, so that all 32-bit platforms will
now print the size of memory.  I also update the code
to deal with the fact that total_memory is now a phys_addr_t.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Removed __devexit annotation of hvc_remove() to avoid a section mismatch
if the backend initialization fails and hvc_remove() must be used to
clean up allocated hvc structs (called in section __init or __devinit).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch provides the hvc_resize() function to update the terminal
window dimensions (struct winsize) for a specified hvc console.
The function stores the new window size and schedules a function
that finally updates the tty winsize and signals the change to
user space (SIGWINCH).
Because the winsize update must acquire a mutex and might sleep,
the function is scheduled instead of being called from hvc_poll()
or khvcd.

This patch uses the tty_do_resize() routine from the tty layer.
A pending resize work is canceled in hvc_close() and hvc_hangup().
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If put_char() routine of a hvc console backend returns 0, then the
hvc console starts looping in the following scenarios:

1. hvc_console_print()
	If put_char() returns 0 then the while loop may loop forever.
	I have added the missing check for 0 to throw away console messages.

2. khvcd may loop:
	The thread calls hvc_poll() --> hvc_push()... if there are still
	buffered data then the HVC_POLL_WRITE bit is set and causes the
	khvcd thread to loop (if yield() returns immediately).

	However, instead of looping, the khvcd thread could sleep for
	MIN_TIMEOUT (doing the same as for get_chars()).
	The MIN_TIMEOUT is set if hvc_push() was not able to write
	data to the backend. If data has been written, the timeout is
	set to 0 to immediately re-schedule hvc_poll().
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> (virtio_console)
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

After a tty hangup() or close() operation, processes might not reset the
termio settings to a sane state. In order to reset the termios to its
default settings the tty driver flag TTY_DRIVER_RESET_TERMIOS has been added.

TTY driver flag description from include/linux/tty_driver.h:
	TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
	  termios setting when the last process has closed the device.
	  Used for PTY's, in particular.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I have added a hangup notifier that can be used by hvc console
backends to handle a tty hangup. The default irq hangup notifier
calls the notifier_del_irq() for compatibility.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Manual merge of:

	arch/powerpc/Kconfig
	arch/powerpc/include/asm/page.h

The RTC is sitting on the I2C2 bus at address 0x68. RTC interrupt signal
is connected to the IPIC's EXT2 interrupt line, the line is shared with
Vitesse 8201 Ethernet PHY.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

MCU is an external Freescale MC9S08QG8 microcontroller, mainly used to
provide soft power-off function, but also exports two GPIOs (wired to
the LEDs and also available from the external headers).

Added the MCU on mpc8349emitx, mpc837xrdb and mpc8315erdb boards.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Change the top-level #address-cells and #size-cells to <2> so the
mpc8572ds.dts is easier to deal with both a true 32-bit physical
or 36-bit physical address space.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The patch allows to specify that an SPI device needs an active high chip
select.
Signed-off-by: NWolfgang Ocker <weo@reccoware.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We don't want to encourage the bogus device_type usage.

The device type isn't used in the code, so we can simply remove it from
the documentation and dts files.

Boards should specify proper compatible entries instead.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Similar to commit 618b26d5, also remove
automatic probing for this i2c controller. Might need updates to dts files
using it.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJochen Friedrich <jochen@scram.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

These functions should have been static, and inspection shows they
are no longer used.   (We used to parse mem= but we now defer that
to early_param).
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 9b09c6d9 ("powerpc: Change the
default link address for pSeries zImage kernels") changed the
real-base value in the CHRP note added by addnote to the zImage from
12MB to 32MB.  It turns out that this causes unnecessary extra reboots
on old 32-bit CHRP machines.  This therefore adds a -r flag to addnote
to allow us to specify what real-base value it should put in the CHRP
note, and adjusts the wrapper script to pass -r c00000 to addnote when
making a zImage for a CHRP machine.  Also, CHRP machines ignore the
RPA note, so we don't need to arrange for it to be the same as the
kernel's.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

numa_enforce_memory_limit tried to be smart and only call lmb_end_of_DRAM
when a memory limit was set via mem= on the command line.  However,
the early boot code will also limit memory added to the lmb system
when iommu=off is specified.  When this happens, the page allocator
is given pages not in the linear mapping and this results in a fatal
data reference to the unmapped page.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We used to assume that even numbered threads were the primary
threads, ie those that would be listed and started as a cpu from
open firmware.  Replace a left over is even (% 2) check with a check
for it being a primary thread and update the comments.

Tested with a debug print on pseries, identical code found for cell.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

64 bit powerpc requires the kexec user space tools avoid overwriting
the static kernel image and translation hash table when choosing
where to put memory image data because it copies the data into place
using the kernels virtual memory system.  Kexec userspace determines
these and other areas blocked by reading properties the kernel adds,
but does not filter these properties when creating the device tree
for the next kernel.

When the second kernel tries to add its values for these properties,
the export via /proc/device-tree is hidden by the pre-existing but
stale values from the flat tree.  Kexec userspace reads the old
property, allocates the new kernel at the old kernel's end, and
gets rejected by the overlap check.

Search and remove these stale properties before adding the new values.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are no users of PPC_MERGE in tree so we can get rid of it.
It was a hold over from the arch/ppc days.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are two issues when we enable CONFIG_RELOCATABLE.  The first is due
to the fact that phys_addr_t is now defined in linux/types.h.  The second
is due to the fact that the DMA code changes expose memstart_addr to
prom_init.c
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Format string bug.  Not exploitable, as this is only writable by root,
but worth fixing all the same.

See 326f6a5cSigned-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This target is needed to build cuImages with an embedded ramdisk image.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I noticed, when trying to use, e.g.,
node = find_node_by_prop_value(prev, "booleanprop", "", 0))
to search for all nodes with a certain boolean property, that memcmp()
returns garbage when comparing zero bytes.  It should return zero.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Adjust amount to reserve based on previous nodes for reserves spanning
multiple nodes. Check if the node active range is empty before attempting
to pass the reserve to bootmem.  In practice the range shouldn't be empty,
but to be sure we check.
Signed-off-by: NJon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The issue is the SPU code is not holding the kernel mutex lock while
adding samples to the kernel buffer.

This patch creates per SPU buffers to hold the data.  Data
is added to the buffers from in interrupt context.  The data
is periodically pushed to the kernel buffer via a new Oprofile
function oprofile_put_buff(). The oprofile_put_buff() function
is called via a work queue enabling the funtion to acquire the
mutex lock.

The existing user controls for adjusting the per CPU buffer
size is used to control the size of the per SPU buffers.
Similarly, overflows of the SPU buffers are reported by
incrementing the per CPU buffer stats.  This eliminates the
need to have architecture specific controls for the per SPU
buffers which is not acceptable to the OProfile user tool
maintainer.

The export of the oprofile add_event_entry() is removed as it
is no longer needed given this patch.

Note, this patch has not addressed the issue of indexing arrays
by the spu number.  This still needs to be fixed as the spu
numbering is not guarenteed to be 0 to max_num_spus-1.
Signed-off-by: NCarl Love <carll@us.ibm.com>
Signed-off-by: NMaynard Johnson <maynardj@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAcked-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

"unsigned int" speed cannot be negative, it's thus pointless
to test if it is.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The pfn of the memory to be removed should be validated prior to
attempting to remove the memory.  In cases where the probe of a
memory section fails during hotplug add, the pfn for the lmb may
not be valid.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If the vmlinux binary in memory is larger than 4 MiB than it collides
with the initial boot code which is linked at 4 MiB in case of cuBoot.
If the the uncompressed image size (on disk size) is less than 4 MiB
then it would fit. The difference between those two sizes is the bss
section. In cuBoot we have the dtb embedded right after the data
section so it is very likely that the reset of the bss section (in
kernel's start up code) will overwrite the dtb blob. Therefore we
reallocate the dtb. Something similar is allready done to the initrd.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit f06febc9 ("timers: fix itimer/
many thread hang") introduced a new task_cputime interface and
subsequently only converted binfmt_elf over to it.  This results in the
build for binfmt_elf_fdpic blowing up given that p->signal->{u,s}time
have disappeared from underneath us.

Apply the same trivial fix from binfmt_elf to binfmt_elf_fdpic.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a comment to clarify why atomic_dec_if_positive is being used
to decrement gang's aff_sched_count on SPU context unbind.
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

This patch improves redability of the code responsible for trying to find
a node with enough SPUs not committed to other affinity gangs.

An additional check is also added, to avoid taking into account gangs that
have no SPU affinity.
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

No need to zero the entire buffer, just the head and tail indices.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

With most file readers (eg cat, dd), reading a context's regs file will
result in two reads: the first to read the data, and the second to
return EOF. Because each read performs a spu_acquire_saved, we end up
descheduling and re-scheduling the context twice.

This change does a simple check to see if we'd return EOF before
calling spu_acquire_saved(), saving the extra schedule operation.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

Currently, read() on the sputrace log will block until the read buffer
is full. This makes it difficult to retrieve the end of the buffer, as
the user will need to read with the right-sized buffer.

In a similar method as 91553a1b5e0df006a3573a88d98ee7cd48a3818a, this
change makes the switch_log return if there has already been data
read.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>