- 05 7月, 2013 3 次提交
-
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184206.FC11422F@kernel.stglabs.ibm.com These runtime tests are great, except that there are a lot of them, and they are very rarely needed. Give them their own menu so that only the folks who need them will have to go looking for them. Note that there are some other runtime tests that are not in here, like for RCU or locking. This menu should only be used for tests that do not have a more appropriate home. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184203.37E6C724@kernel.stglabs.ibm.com There are a *LOT* of memory debugging options. They are just scattered all over the "Kernel Hacking" menu. Sure, "memory debugging" is a very vague term and it's going to be hard to make absolute rules about what goes in here, but this has to be better than what we had before. This does, however, leave out the architecture-specific memory debugging options (like x86's DEBUG_SET_MODULE_RONX). There would need to be some substantial changes to move those in here. Kconfig can not easily mix arch-specific and generic options together: it really requires a file per-architecture, and I think having an arch/foo/Kconfig.debug-memory might be taking things a bit too far Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 7月, 2013 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull another powerpc fix from Benjamin Herrenschmidt: "I mentioned that while we had fixed the kernel crashes, EEH error recovery didn't always recover... It appears that I had a fix for that already in powerpc-next (with a stable CC). I cherry-picked it today and did a few tests and it seems that things now work quite well. The patch is also pretty simple, so I see no reason to wait before merging it." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/eeh: Fix fetching bus for single-dev-PE
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of seven bug fixes. Several fcoe fixes for locking problems, initiator issues and a VLAN API change, all of which could eventually lead to data corruption, one fix for a qla2xxx locking problem which could lead to multiple completions of the same request (and subsequent data corruption) and a use after free in the ipr driver. Plus one minor MAINTAINERS file update" (only six bugfixes in this pull, since I had already pulled the fcoe API fix directly from Robert Love) * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] ipr: Avoid target_destroy accessing memory after it was freed [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines MAINTAINERS: Fix fcoe mailing list libfc: extend ex_lock to protect all of fc_seq_send libfc: Correct check for initiator role libfcoe: Fix Conflicting FCFs issue in the fabric
-
- 30 6月, 2013 12 次提交
-
-
由 Gavin Shan 提交于
While running Linux as guest on top of phyp, we possiblly have PE that includes single PCI device. However, we didn't return its PCI bus correctly and it leads to failure on recovery from EEH errors for single-dev-PE. The patch fixes the issue. Cc: <stable@vger.kernel.org> # v3.7+ Cc: Steve Best <sbest@us.ibm.com> Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "We discovered some breakage in our "EEH" (PCI Error Handling) code while doing error injection, due to a couple of regressions. One of them is due to a patch (37f02195 "powerpc/pci: fix PCI-e devices rescan issue on powerpc platform") that, in hindsight, I shouldn't have merged considering that it caused more problems than it solved. Please pull those two fixes. One for a simple EEH address cache initialization issue. The other one is a patch from Guenter that I had originally planned to put in 3.11 but which happens to also fix that other regression (a kernel oops during EEH error handling and possibly hotplug). With those two, the couple of test machines I've hammered with error injection are remaining up now. EEH appears to still fail to recover on some devices, so there is another problem that Gavin is looking into but at least it's no longer crashing the kernel." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Improve device hotplug initialization powerpc/eeh: Add eeh_dev to the cache during boot
-
由 Olof Johansson 提交于
Due to recent changes and expecations of proper cpu bindings, there are now cases for many of the in-tree devicetrees where a WARN() will hit on boot due to badly formatted /cpus nodes. Downgrade this to a pr_warn() to be less alarmist, since it's not a new problem. Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN without this, the others do not. Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
Commit 37f02195 (powerpc/pci: fix PCI-e devices rescan issue on powerpc platform) fixes a problem with interrupt and DMA initialization on hot plugged devices. With this commit, interrupt and DMA initialization for hot plugged devices is handled in the pci device enable function. This approach has a couple of drawbacks. First, it creates two code paths for device initialization, one for hot plugged devices and another for devices known during the initial PCI scan. Second, the initialization code for hot plugged devices is only called when the device is enabled, ie typically in the probe function. Also, the platform specific setup code is called each time pci_enable_device() is called, not only once during device discovery, meaning it is actually called multiple times, once for devices discovered during the initial scan and again each time a driver is re-loaded. The visible result is that interrupt pins are only assigned to hot plugged devices when the device driver is loaded. Effectively this changes the PCI probe API, since pci_dev->irq and the device's dma configuration will now only be valid after pci_enable() was called at least once. A more subtle change is that platform specific PCI device setup is moved from device discovery into the driver's probe function, more specifically into the pci_enable_device() call. To fix the inconsistencies, add new function pcibios_add_device. Call pcibios_setup_device from pcibios_setup_bus_devices if device setup is not complete, and from pcibios_add_device if bus setup is complete. With this change, device setup code is moved back into device initialization, and called exactly once for both static and hot plugged devices. [ This also fixes a regression introduced by the above patch which causes dev->irq to be overwritten under some cirumstances after MSIs have been enabled for the device which leads to crashes due to the MSI core "hijacking" dev->irq to store the base MSI number and not the LSI. --BenH ] Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a crash in the crypto layer exposed by an SCTP test tool" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algboss - Hold ref count on larval
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm/qxl fix from Dave Airlie: "Bad me forgot an access check, possible security issue, but since this is the first kernel with it, should be fine to just put it in now" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: add missing access check for execbuffer ioctl
-
由 Mathieu Desnoyers 提交于
This __put_user() could be used by unprivileged processes to write into kernel memory. The issue here is that even if copy_siginfo_to_user() fails, the error code is not checked before __put_user() is executed. Luckily, ptrace_peek_siginfo() has been added within the 3.10-rc cycle, so it has not hit a stable release yet. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Pedro Alves <palves@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fix from Sage Weil: "This is a recently spotted regression in the snapshot behavior... It turns out several tests weren't being run in the nightlies so this took a while to spot" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: send snapshot context with writes
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull ubifs fixes from Al Viro: "A couple of ubifs readdir/lseek race fixes. Stable fodder, really nasty..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: UBIFS: fix a horrid bug UBIFS: prepare to fix a horrid bug
-
由 Linus Torvalds 提交于
Merge tag 'for-linus-20130628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-mn10300 Pull two MN10300 fixes from David Howells: "The first fixes a problem with passing arrays rather than pointers to get_user() where __typeof__ then wants to declare and initialise an array variable which gcc doesn't like. The second fixes a problem whereby putting mem=xxx into the kernel command line causes init=xxx to get an incorrect value." * tag 'for-linus-20130628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-mn10300: mn10300: Use early_param() to parse "mem=" parameter mn10300: Allow to pass array name to get_user()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner: "Correct an ordering issue in the tick broadcast code. I really wish we'd get compensation for pain and suffering for each line of code we write to work around dysfunctional timer hardware." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix tick_broadcast_pending_mask not cleared
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fix from Ingo Molnar: "One more fix for a recently discovered bug" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Disable monitoring on setuid processes for regular users
-
- 29 6月, 2013 2 次提交
-
-
由 Artem Bityutskiy 提交于
Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage, but this may corrupt memory and lead to all kinds of problems like crashes an security holes. This patch fixes the problem by using the 'file->f_version' field, which '->llseek()' always unconditionally sets to zero. We set it to 1 in 'ubifs_readdir()' and whenever we detect that it became 0, we know there was a seek and it is time to clear the state saved in 'file->private_data'. I tested this patch by writing a user-space program which runds readdir and seek in parallell. I could easily crash the kernel without these patches, but could not crash it with these patches. Cc: stable@vger.kernel.org Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Tested-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Artem Bityutskiy 提交于
Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. First of all, this means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it. But this particular patch does not fix the problem. This patch is only a preparation, and the fix will follow next. In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly, because 'file->f_pos' can be changed by '->llseek()' at any point. This may lead 'ubifs_readdir()' to returning inconsistent data: directory entry names may correspond to incorrect file positions. So here we introduce a local variable 'pos', read 'file->f_pose' once at very the beginning, and then stick to 'pos'. The result of this is that when 'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of 'ubifs_readdir()', the latter "wins". Cc: stable@vger.kernel.org Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Tested-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 6月, 2013 4 次提交
-
-
由 Akira Takeuchi 提交于
This fixes the problem that "init=" options may not be passed to kernel correctly. parse_mem_cmdline() of mn10300 arch gets rid of "mem=" string from redboot_command_line. Then init_setup() parses the "init=" options from static_command_line, which is a copy of redboot_command_line, and keeps the pointer to the init options in execute_command variable. Since the commit 026cee00 upstream (params: <level>_initcall-like kernel parameters), static_command_line becomes overwritten by saved_command_line at do_initcall_level(). Notice that saved_command_line is a command line which includes "mem=" string. As a result, execute_command may point to weird string by the length of "mem=" parameter. I noticed this problem when using the command line like this: mem=128M console=ttyS0,115200 init=/bin/sh Here is the processing flow of command line parameters. start_kernel() setup_arch(&command_line) parse_mem_cmdline(cmdline_p) * strcpy(boot_command_line, redboot_command_line); * Remove "mem=xxx" from redboot_command_line. * *cmdline_p = redboot_command_line; setup_command_line(command_line) <-- command_line is redboot_command_line * strcpy(saved_command_line, boot_command_line) * strcpy(static_command_line, command_line) parse_early_param() strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); parse_early_options(tmp_cmdline); parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param); parse_args("Booting ..", static_command_line, ...); init_setup() <-- save the pointer in execute_command rest_init() kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); At this point, execute_command points to "/bin/sh" string. kernel_init() kernel_init_freeable() do_basic_setup() do_initcalls() do_initcall_level() (*) strcpy(static_command_line, saved_command_line); Here, execute_command gets to point to "200" string !! Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
This fixes the following compile error: CC block/scsi_ioctl.o block/scsi_ioctl.c: In function 'sg_scsi_ioctl': block/scsi_ioctl.c:449: error: invalid initializer Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Dave Airlie 提交于
Reported-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
commit f8f7d63f ("powerpc/eeh: Trace eeh device from I/O cache") broke EEH on pseries for devices that were present during boot and have not been hotplugged/DLPARed. eeh_check_failure will get the eeh_dev from the cache, and will get NULL. eeh_addr_cache_build adds the addresses to the cache, but eeh_dev for the giving pci_device is not set yet. Just reordering the call to eeh_addr_cache_insert_dev works fine. The ordering is similar to the one in eeh_add_device_late. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 6月, 2013 16 次提交
-
-
由 Josh Durgin 提交于
Sending the right snapshot context with each write is required for snapshots to work. Due to the ordering of calls, the snapshot context is never set for any requests. This causes writes to the current version of the image to be reflected in all snapshots, which are supposed to be read-only. This happens because rbd_osd_req_format_write() sets the snapshot context based on obj_request->img_request. At this point, however, obj_request->img_request has not been set yet, to the snapshot context is set to NULL. Fix this by moving rbd_img_obj_request_add(), which sets obj_request->img_request, before the osd request formatting calls. This resolves: http://tracker.ceph.com/issues/5465Reported-by: NKarol Jurak <karol.jurak@gmail.com> Signed-off-by: NJosh Durgin <josh.durgin@inktank.com> Reviewed-by: NSage Weil <sage@inktank.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 James Bottomley 提交于
This patch fixes a critical bug that was introduced in 3.9 related to VLAN tagging FCoE frames.
-
由 James Bottomley 提交于
3.10 fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Found via trinity: If you connect up an ipv6 socket to an ipv4 mapped address then an ipv6 one, sendmsg() can croak because ip6_sk_dst_check() assumes the route cached in the socket is an ipv6 one. In this case there is an ipv4 route attached, so it gets stomped on. Reported by Dave Jones and Hannes Frederic Sowa, fixed by Eric Dumazet. 2) AF_KEY notifications leak some kernel memory to userspace, fix from Mathias Krause. 3) DLCI calls __dev_get_by_name() without proper locking, and dlci_del doesn't validate that the device being deleted is actually a DLCI one. Fixes from Li Zefan. 4) Length check on bluetooth l2cap information responses is wrong, each response type has a different lenth, so we should make sure it's in a given range rather than enforce one single valid length. From Jaganath Kanakkassery. 5) Receive FIFO overflow is really easy to trigger in stress scenerios in the sh_eth driver, but the event isn't being handled properly at all. Specifically, the mask of error interrupts doesn't include the event so we never clear it, resulting in the driver becomming wedged processing an interrupt that never gets cleared. Fix from Sergei Shtylyov. 6) qlcnic sleeps while holding a spinlock, use mdelay() instead of msleep(). From Shahed Shaikh. 7) Missing curly braces causes SIP netfilter NAT module to always drop packets. Fix from Balazs Peter Odor. 8) ipt_ULOG in netfilter passes the wrong value to timer setup, causing the timer to dereference crap when it fires. Fix from Gao Feng. 9) Missing RCU protection around txq->axq_acq traversal in ath_txq_schedule(). Fix from Felix Fietkau. 10) Idle state transition test in ath9k_htc_config() is reversed, fix from Sujith Manoharan. 11) IPV6 forwarding handles unicast Router Alert packets incorrectly. It tests the wrong option state. Previously opt->ra being non-zero indicated a router alert marking in the SKB, but now it's indicated by a bit in opt->flags. Fix from YOSHIFUJI Hideaki. 12) SKB leak in GRE tunnel GSO handling, from Eric Dumazet. 13) get_user_pages_fast() error handling in TUN and MACVTAP use the same local variable for the base index and the loop iterator for page traversal, oops! Fix from Michael S Tsirkin. 14) ipv6_get_lladdr() can fail, and we must therefore check it's return value in inet6_set_iftoken(). For from Hannes Frederic Sowa. 15) If you change an interface name and meanwhile can sneak in something that looks up the name (like SO_BINDTODEVICE or SIOCGIFNAME) we can deadlock with CONFIG_PREEMPT=n. Fix this by providing a helper function that properly uses raw_seqcount_begin(). From Nicolas Schichan. 16) Chain noise calibration test is inverted in iwlwifi, fix from Nikolay Martynov. 17) Properly set TX iwlwifi descriptor flags for back requests. Fix from Emmanuel Grumbach. 18) We can't assume skb_transport_header() is set in xt_TCPOPTSTRAP module, fix from Pablo Neira Ayuso. 19) Some crummy APs don't provide the proper High Throughput info in association response frames. Add a workaround by assume we'll use whatever is in the beacon/probe. Fix from Johannes Berg. 20) mac80211 call to rate_idx_match_mask() swaps two arguments (mask and channel width). Fix from Simon Wunderlich. 21) xt_TCPMSS (like xt_TCPOPTSTRAP) must not try to handle fragmented frames. Fix from Phil Oester. 22) Fix rate control regression causing iwlwifi/iwlegacy chips to use 1Mbit/s on pre-11n networks. From Moshe Benji and Stanslaw Gruszka. 23) Disable brcmsmac power-save functions, they cause regressions. From Arend van Spriel. 24) Enforce a sane minimum MTU in l2cap_build_cmd() otherwise we can easily crash. Fix from Anderson Lizardo. 25) If a learning packet arrives during vxlan_stop() we crash, easily fixed by checking netif_running(). From Stephen Hemminger. 26) Static vxlan FDB entries should not be migrated, also from Stephen. 27) skb_clone() failures not handled in vxlan_xmit(), oops. Also from Stephen. 28) Add minimal driver for AR816x/AR817x ethernet chips, from Johannes Berg. 29) Fix regression in userspace VLAN acceleration control, added by the 802.1ad support changes. Fix from Fernando Luis Vazquez Cao. 30) Interval selection for MLD queries in the bridging code was reversed. Fix from Linus Lüssing. 31) ipv6's ndisc_send_redirect() erroneously writes to the packet we received not the packet we are building to send out. Fix from Matthias Schiffer. 32) Don't free netdev before unregistering it, in usb_8dev can driver. From Marc Kleine-Budde. 33) Fix nl80211 attribute buffer races, from Johannes Berg. 34) Although netlink_diag.h is under uapi/ it isn't present in Kbuild. From Stephen Hemminger. 35) Wrong address and family passed to MD5 key lookups in TCP, from Aydin Arik. 36) phy_type attribute created by SFC driver should not be writable. From Ben Hutchings. 37) Receive/Transmit queue allocations in pxa168_eth and mv643xx_eth should use kzalloc(). Otherwise if setup fails half-way, we'll dereference garbage when trying to teardown the rings. From Lubomir Rintel. 38) Fix double-allocation of dst (resulting in unfreeable net device) in ipv6's init_loopback(). From Gao Feng. 39) Fix fragmentation handling SKB leak in netfilter conntrack, we were freeing the wrong skb pointer. From Phil Oester. 40) Don't report "-1" (SPEED_UNKNOWN) in bond_miimon_commit(), from Nikolay Aleksandrov. 41) davinci_cpdma doesn't check for DMA mapping errors, letting the device scribble to random addresses. From Sebastian Siewior. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) dlci: validate the net device in dlci_del() dlci: acquire rtnl_lock before calling __dev_get_by_name() af_key: fix info leaks in notify messages ipv6: ip6_sk_dst_check() must not assume ipv6 dst net: fix kernel deadlock with interface rename and netdev name retrieval. net/tg3: Avoid delay during MMIO access ipv6: check return value of ipv6_get_lladdr macvtap: fix recovery from gup errors tun: fix recovery from gup errors gre: fix a possible skb leak ipv6: Process unicast packet with Router Alert by checking flag in skb. ath9k_htc: Handle IDLE state transition properly ath9k: fix an RCU issue in calling ieee80211_get_tx_rates netfilter: ipt_ULOG: fix incorrect setting of ulog timer netfilter: ctnetlink: send event when conntrack label was modified netfilter: nf_nat_sip: fix mangling qlcnic: Do not sleep while holding spinlock drivers: net: cpsw: fix compilation error with cpsw driver tcp: doc : fix the syncookies default value sh_eth: fix misreporting of transmit abort ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull i915 drm fixes from Dave Airlie: "These should be the last two fixes for i915, one is for a fence leak killing X on some older GPUs, and one is a late regression partial revert for an swiotlb/xen/i915 interaction, Konrad has promised to figure out the proper answer, and this patch is the best thing to do at this stage to avoid regressing" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: make compact dma scatter lists creation work with SWIOTLB backend. drm/i915: Restore fences after resume and GPU resets
-
由 Zefan Li 提交于
We triggered an oops while running trinity with 3.4 kernel: BUG: unable to handle kernel paging request at 0000000100000d07 IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] PGD 640c0d067 PUD 0 Oops: 0000 [#1] PREEMPT SMP CPU 3 ... Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA RIP: 0010:[<ffffffffa0109738>] [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] ... Call Trace: [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280 [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0 [<ffffffff8118354a>] ? fget_light+0x3ea/0x490 [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80 [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b ... It's because the net device is not a dlci device. Reported-by: NLi Jinyue <lijinyue@huawei.com> Signed-off-by: NLi Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zefan Li 提交于
Otherwise the net device returned can be freed at anytime. Signed-off-by: NLi Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
key_notify_sa_flush() and key_notify_policy_flush() miss to initialize the sadb_msg_reserved member of the broadcasted message and thereby leak 2 bytes of heap memory to listeners. Fix that. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It's possible to use AF_INET6 sockets and to connect to an IPv4 destination. After this, socket dst cache is a pointer to a rtable, not rt6_info. ip6_sk_dst_check() should check the socket dst cache is IPv6, or else various corruptions/crashes can happen. Dave Jones can reproduce immediate crash with trinity -q -l off -n -c sendmsg -c connect With help from Hannes Frederic Sowa Reported-by: NDave Jones <davej@redhat.com> Reported-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
When the kernel (compiled with CONFIG_PREEMPT=n) is performing the rename of a network interface, it can end up waiting for a workqueue to complete. If userland is able to invoke a SIOCGIFNAME ioctl or a SO_BINDTODEVICE getsockopt in between, the kernel will deadlock due to the fact that read_secklock_begin() will spin forever waiting for the writer process (the one doing the interface rename) to update the devnet_rename_seq sequence. This patch fixes the problem by adding a helper (netdev_get_name()) and using it in the code handling the SIOCGIFNAME ioctl and SO_BINDTODEVICE setsockopt. The netdev_get_name() helper uses raw_seqcount_begin() to avoid spinning forever, waiting for devnet_rename_seq->sequence to become even. cond_resched() is used in the contended case, before retrying the access to give the writer process a chance to finish. The use of raw_seqcount_begin() will incur some unneeded work in the reader process in the contended case, but this is better than deadlocking the system. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fix from Mark Brown: "Fix module loading for tps6586x. A simple one liner fix to make module loading work for distros (product specific kernels tend to have things built in)" * tag 'regulator-v3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: mfd: tps6586x: correct device name of the regulator cell
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull GPIO regression fix from Grant Likely: "It took a while to work out the correct solution to this regression. It is sorted now. This branch was constructed and tested by Tony. I've verified that it builds and signed the tag" * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio/omap: don't use linear domain mapping for OMAP1
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull late power management and ACPI fixes from Rafael Wysocki: "Sorry about the timing of this, but ACPI-based docking stations with PCI devices on them and ATA bays would be hardly usable with 3.10 without it. We've been working on these fixes for the last couple of weeks and everyone involved appears to be reasonably comfortable with them now. The PM part is one fix for a cpufreq regression introduced recently - Fix for an ACPI dock regression introduced by the recent rework of the ACPI-based PCI hotplug code (acpiphp) that caused it to be initialized before the ACPI dock driver, which is incorrect (ACPI dock has to be initialized before acpiphp so that acpiphp can register PCI devices on docking stations with it for PCI hotplug on re-dock to work). From Jiang Liu. - Fix for PCI resources allocation in the ACPI-based PCI hotplug code (acpiphp) that makes it use the same PCI resources assignment rules during runtime hotplug that are used during boot (the BIOS' choices are now respected in both cases). This prevents PCI resource allocation failures during hotplug from happening in some cases. From Jiang Liu. - Fix for ordering and synchronization issues during hot-removal of PCI devices on docking stations. It makes the ACPI dock code carry out the PCI devices removal synchronously during undock instead of spawning a separate asynchronous work item to remove each of them without even bothering to wait for all those work items to complete. The hot-addition part is changed analogously. - Fix for a regression (introduced a few releases ago) that removed the code to register a hotplug notificaion handler for for ATA ports/devices inadvertently which prevented ATA bays hotplug from working. The missing code is added back with some improvements. From Aaron Lu. - Fix for a recent cpufreq regression causing a NULL pointer dereference to trigger in od_set_powersave_bias() in some situations from Jacob Shin" * tag 'pm+acpi-3.10-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: fix NULL pointer deference at od_set_powersave_bias() libata-acpi: add back ACPI based hotplug functionality ACPI / dock / PCI: Synchronous handling of dock events for PCI devices PCI / ACPI: Use boot-time resource allocation rules during hotplug ACPI / dock: Initialize ACPI dock subsystem upfront
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Three small fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot() hw_breakpoint: Fix cpu check in task_bp_pinned(cpu) kprobes: Fix arch_prepare_kprobe to handle copy insn failures
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Another round of ARM fixes. Largest one is the second half of the PJ4B fix which was pushed in the previous -rc - this one was delayed because its original caused a build regression while trying to fix a regression! As ever, noMMU gets forgotten when fixing problems on MMU, so we have a noMMU fix for a previous fix included in this set. A couple of fixes from Lorenzo for problems with the ARM DT CPU code, and a one liner to remove the buggy 'wait for interrupt' with FA526 cores" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7773/1: PJ4B: Add support for errata 4742 ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU ARM: 7763/1: kernel: fix __cpu_logical_map default initialization ARM: 7762/1: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes ARM: 7760/1: cpu_fa526_do_idle: remove WFI
-
git://git.kernel.org/pub/scm/linux/kernel/git/rwlove/fcoe由 Linus Torvalds 提交于
Pull FCoE fix from Robert W Love: "This patch fixes a critical bug that was introduced in 3.9 related to VLAN tagging FCoE frames" * tag 'critical_fix_for_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rwlove/fcoe: fcoe: Use correct API to set vlan tag for FCoE Ethertype skbs
-