Otherwise we get a warning from the call in br_forward().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without CONFIG_BRIDGE_IGMP_SNOOPING,
BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately
initialized, so we can see garbage.

A clear option to fix this is to set it even without that
config, but we cannot optimize out the branch.

Let's introduce a macro that returns value of mrouters_only
and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

route: Fix caught BUG_ON during rt_secret_rebuild_oneshot()

Call rt_secret_rebuild can cause BUG_ON(timer_pending(&net->ipv4.rt_secret_timer)) in
add_timer as there is not any synchronization for call rt_secret_rebuild_oneshot()
for the same net namespace.

Also this issue affects to rt_secret_reschedule().

Thus use mod_timer enstead.
Signed-off-by: NVitaliy Gusev <vgusev@openvz.org>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stanse found that one error path in netpoll_setup dereferences npinfo
even though it is NULL. Avoid that by adding new label and go to that
instead.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Daniel Borkmann <danborkmann@googlemail.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: chavey@google.com
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So in the forward porting of various tipc packages, I was constantly
getting this lockdep warning everytime I used tipc-config to set a network
address for the protocol:

[ INFO: possible circular locking dependency detected ]
2.6.33 #1
tipc-config/1326 is trying to acquire lock:
(ref_table_lock){+.-...}, at: [<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc]

but task is already holding lock:
(&(&entry->lock)->rlock#2){+.-...}, at: [<ffffffffa03150d5>] tipc_ref_lock+0x43/0x63 [tipc]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&entry->lock)->rlock#2){+.-...}:
[<ffffffff8107b508>] __lock_acquire+0xb67/0xd0f
[<ffffffff8107b78c>] lock_acquire+0xdc/0x102
[<ffffffff8145471e>] _raw_spin_lock_bh+0x3b/0x6e
[<ffffffffa03152b1>] tipc_ref_acquire+0xe8/0x11b [tipc]
[<ffffffffa031433f>] tipc_createport_raw+0x78/0x1b9 [tipc]
[<ffffffffa031450b>] tipc_createport+0x8b/0x125 [tipc]
[<ffffffffa030f221>] tipc_subscr_start+0xce/0x126 [tipc]
[<ffffffffa0308fb2>] process_signal_queue+0x47/0x7d [tipc]
[<ffffffff81053e0c>] tasklet_action+0x8c/0xf4
[<ffffffff81054bd8>] __do_softirq+0xf8/0x1cd
[<ffffffff8100aadc>] call_softirq+0x1c/0x30
[<ffffffff810549f4>] _local_bh_enable_ip+0xb8/0xd7
[<ffffffff81054a21>] local_bh_enable_ip+0xe/0x10
[<ffffffff81454d31>] _raw_spin_unlock_bh+0x34/0x39
[<ffffffffa0308eb8>] spin_unlock_bh.clone.0+0x15/0x17 [tipc]
[<ffffffffa0308f47>] tipc_k_signal+0x8d/0xb1 [tipc]
[<ffffffffa0308dd9>] tipc_core_start+0x8a/0xad [tipc]
[<ffffffffa01b1087>] 0xffffffffa01b1087
[<ffffffff8100207d>] do_one_initcall+0x72/0x18a
[<ffffffff810872fb>] sys_init_module+0xd8/0x23a
[<ffffffff81009b42>] system_call_fastpath+0x16/0x1b

-> #0 (ref_table_lock){+.-...}:
[<ffffffff8107b3b2>] __lock_acquire+0xa11/0xd0f
[<ffffffff8107b78c>] lock_acquire+0xdc/0x102
[<ffffffff81454836>] _raw_write_lock_bh+0x3b/0x6e
[<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc]
[<ffffffffa03141ee>] tipc_deleteport+0x40/0x119 [tipc]
[<ffffffffa0316e35>] release+0xeb/0x137 [tipc]
[<ffffffff8139dbf4>] sock_release+0x1f/0x6f
[<ffffffff8139dc6b>] sock_close+0x27/0x2b
[<ffffffff811116f6>] __fput+0x12a/0x1df
[<ffffffff811117c5>] fput+0x1a/0x1c
[<ffffffff8110e49b>] filp_close+0x68/0x72
[<ffffffff8110e552>] sys_close+0xad/0xe7
[<ffffffff81009b42>] system_call_fastpath+0x16/0x1b

Finally decided I should fix this.  Its a straightforward inversion,
tipc_ref_acquire takes two locks in this order:
ref_table_lock
entry->lock

while tipc_deleteport takes them in this order:
entry->lock (via tipc_port_lock())
ref_table_lock (via tipc_ref_discard())

when the same entry is referenced, we get the above warning.  The fix is equally
straightforward.  Theres no real relation between the entry->lock and the
ref_table_lock (they just are needed at the same time), so move the entry->lock
aquisition in tipc_ref_acquire down, after we unlock ref_table_lock (this is
safe since the ref_table_lock guards changes to the reference table, and we've
already claimed a slot there.  I've tested the below fix and confirmed that it
clears up the lockdep issue
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes UDP socket refcnt bugs in the pppol2tp driver.

A bug can cause a kernel stack trace when a tunnel socket is closed.

A way to reproduce the issue is to prepare the UDP socket for L2TP (by
opening a tunnel pppol2tp socket) and then close it before any L2TP
sessions are added to it. The sequence is

Create UDP socket
Create tunnel pppol2tp socket to prepare UDP socket for L2TP
  pppol2tp_connect: session_id=0, peer_session_id=0
L2TP SCCRP control frame received (tunnel_id==0)
  pppol2tp_recv_core: sock_hold()
  pppol2tp_recv_core: sock_put
L2TP ZLB control frame received (tunnel_id=nnn)
  pppol2tp_recv_core: sock_hold()
  pppol2tp_recv_core: sock_put
Close tunnel management socket
  pppol2tp_release: session_id=0, peer_session_id=0
Close UDP socket
  udp_lib_close: BUG

The addition of sock_hold() in pppol2tp_connect() solves the problem.

For data frames, two sock_put() calls were added to plug a refcnt leak
per received data frame. The ref that is grabbed at the top of
pppol2tp_recv_core() must always be released, but this wasn't done for
accepted data frames or data frames discarded because of bad UDP
checksums. This leak meant that any UDP socket that had passed L2TP
data traffic (i.e. L2TP data frames, not just L2TP control frames)
using pppol2tp would not be released by the kernel.

WARNING: at include/net/sock.h:435 udp_lib_unhash+0x117/0x120()
Pid: 1086, comm: openl2tpd Not tainted 2.6.33-rc1 #8
Call Trace:
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c101b871>] ? warn_slowpath_common+0x71/0xd0
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c101b8e3>] ? warn_slowpath_null+0x13/0x20
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c11598a7>] ? sk_common_release+0x17/0x90
 [<c11a5e33>] ? inet_release+0x33/0x60
 [<c11577b0>] ? sock_release+0x10/0x60
 [<c115780f>] ? sock_close+0xf/0x30
 [<c106e542>] ? __fput+0x52/0x150
 [<c106b68e>] ? filp_close+0x3e/0x70
 [<c101d2e2>] ? put_files_struct+0x62/0xb0
 [<c101eaf7>] ? do_exit+0x5e7/0x650
 [<c1081623>] ? mntput_no_expire+0x13/0x70
 [<c106b68e>] ? filp_close+0x3e/0x70
 [<c101eb8a>] ? do_group_exit+0x2a/0x70
 [<c101ebe1>] ? sys_exit_group+0x11/0x20
 [<c10029b0>] ? sysenter_do_call+0x12/0x26
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures the PHY correctly completes its reset before
setting register values.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When transmitting L2TP frames, we derive the outgoing interface's UDP
checksum hardware assist capabilities from the tunnel dst dev. This
can sometimes be NULL, especially when routing protocols are used and
routing changes occur. This patch just checks for NULL dst or dev
pointers when checking for netdev hardware assist features.

BUG: unable to handle kernel NULL pointer dereference at 0000000c
IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/class/net/lo/operstate
Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]

Pid: 0, comm: swapper Not tainted (2.6.32.8 #1)
EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3
EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp]
EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000
ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000)
Stack:
 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800
<0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680
<0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f
Call Trace:
 [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic]
 [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic]
 [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic]
 [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2
 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e
 [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6
 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221
 [<c11df682>] ? ip_forward_finish+0x2e/0x30
 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9
 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404
 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e]
 [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e]
 [<c1047eff>] ? sched_clock_local+0x15/0x11b
 [<c11c1095>] ? net_rx_action+0x96/0x195
 [<c1035750>] ? __do_softirq+0xaa/0x151
 [<c1035828>] ? do_softirq+0x31/0x3c
 [<c10358fe>] ? irq_exit+0x26/0x58
 [<c1004b21>] ? do_IRQ+0x78/0x89
 [<c1003729>] ? common_interrupt+0x29/0x30
 [<c101ac28>] ? native_safe_halt+0x2/0x3
 [<c1008c54>] ? default_idle+0x55/0x75
 [<c1009045>] ? c1e_idle+0xd2/0xd5
 [<c100233c>] ? cpu_idle+0x46/0x62
Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08
EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac
CR2: 000000000000000c
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a driver for SMSC's LAN7500 family of USB 2.0
to gigabit ethernet adapters.  It's loosely based on the smsc95xx
driver but the device registers for LAN7500 are completely different.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes following warning introduced by commit
12bac0d9 ("proc: warn on non-existing
proc entries"):

WARNING: at /work/mips-linux/make/linux/fs/proc/generic.c:316 __xlate_proc_name+0xe0/0xe8()
name 'RBHMA4X00/RTL8019'
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stanse found that one error path (when alloc_skb fails) in netdev_tx
omits to unlock hw_priv->hwlock. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Tristram Ha <Tristram.Ha@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct a potential array overrun due to an off by one error in the
range check on the CAPI CONNECT_REQ CIPValue parameter.
Found and reported by Dan Carpenter using smatch.

Impact: bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Michael Braun <michael-dev@fami-braun.de>

bridge: Fix br_forward crash in promiscuous mode

It's a linux-next kernel from 2010-03-12 on an x86 system and it
OOPs in the bridge module in br_pass_frame_up (called by
br_handle_frame_finish) because brdev cannot be dereferenced (its set to
a non-null value).

Adding some BUG_ON statements revealed that
 BR_INPUT_SKB_CB(skb)->brdev == br-dev
(as set in br_handle_frame_finish first)
only holds until br_forward is called.
The next call to br_pass_frame_up then fails.

Digging deeper it seems that br_forward either frees the skb or passes
it to NF_HOOK which will in turn take care of freeing the skb. The
same is holds for br_pass_frame_ip. So it seems as if two independent
skb allocations are required. As far as I can see, commit
b33084be ("bridge: Avoid unnecessary
clone on forward path") removed skb duplication and so likely causes
this crash. This crash does not happen on 2.6.33.

I've therefore modified br_forward the same way br_flood has been
modified so that the skb is not freed if skb0 is going to be used
and I can confirm that the attached patch resolves the issue for me.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since all callers of br_mdb_ip_get need to check whether the
hash table is NULL, this patch moves the check into the function.

This fixes the two callers (query/leave handler) that didn't
check it.
Reported-by: NMichael Braun <michael-dev@fami-braun.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few subdevice IDs seem to have been dropped when hfc_multi was
included upstream, just compare the list at
http://www.openvox.cn/viewvc/misdn/trunk/hfc_multi.c?revision=75&view=annotate#l175
with the IDs in drivers/isdn/hardware/mISDN/hfcmulti.c

Added PCIe 2 Port card and LED settings (same as PCI)
Do not use <linux/pci_ids.h> /KKe
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NKarsten Keil <keil@b1-systems.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dccp: fix panic caused by failed initialisation

This fixes a kernel panic reported thanks to Andre Noll:

if DCCP is compiled into the kernel and any out of the initialisation
steps in net/dccp/proto.c:dccp_init() fail, a subsequent attempt to create
a SOCK_DCCP socket will panic, since inet{,6}_create() are not prevented
from creating DCCP sockets.

This patch fixes the problem by propagating a failure in dccp_init() to
dccp_v{4,6}_init_net(), and from there to dccp_v{4,6}_init(), so that the
DCCP protocol is not made available if its initialisation fails.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can never reach the return statement.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling tty_buffer_request_room() before tty_insert_flip_string()
is unnecessary, costs CPU and for big buffers can mess up the
multi-page allocation avoidance.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Acked-by: NKarsten Keil <keil@b1-systems.de>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>, stable@kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In RING handling, clear the table of received parameter strings in
a loop like everywhere else, instead of by enumeration which had
already gotten out of sync.

Impact: minor bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Acked-by: NKarsten Keil <keil@b1-systems.de>
CC: stable@kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Registering/unregistering the Gigaset CAPI driver when a device is
connected/disconnected causes an Oops when disconnecting two Gigaset
devices in a row, because the same capi_driver structure gets
unregistered twice. Fix by making driver registration/unregistration
a separate operation (empty in the ISDN4Linux case) called when the
main module is loaded/unloaded.

Impact: bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Acked-by: NKarsten Keil <keil@b1-systems.de>
CC: stable@kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CONFIG_HSO_AUTOPM is set by KConfig / set in the Kernel source, makefiles
and won't be ever set this way, therefor simply removing the protected
code.
Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CONFIG_USE_INTERNAL_TIMER seems to be the remainings of some experiment.
It is explicitely #undef-ed as not working, only referenced from one
source file and rather aged.

Hereby cleaning it from the kernel tree.
Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Acked-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix Makefiles so that Documentation/networking/timestamping/timestamping.c
will build when using the CONFIG_BUILD_DOCSRC kconfig option.
(timestamping.c does not build currently with its simple Makefile.)

Also fix printf format warnings.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,e3,e4;
@@

- memset(e1,e2,e3);
  memcpy(e1,e4,e3);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace references to the '20' magic number found throughout the Eicon
ISDN driver for the length of the station_id field in the T30_INFO struct
with the T30_MAX_STATION_ID_LENGTH symbolic constant.
Signed-off-by: NIan Munsie <imunsie@au.ibm.com>
Cc: Armin Schindler <mac@melware.de>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When compiling this driver, the compiler throws the following warnings:

drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds
drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds
drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds
drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds
drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds
drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds

This arises from the particular semantics the driver is using to write to
the nlc array (static byte[256]).  The array has a length in byte 0
followed by a T30_INFO struct starting at byte 1.

The T30_INFO struct has a number of variable length strings after the
station_id entry, which cannot be explicitly defined in the struct and the
driver accesses them with an array index to station_id beyond the length
of station_id.

This patch merely changes the semantics that the driver uses to access the
entries after the station_id entry to use the original 256 byte nlc array
taking the offset and length of the station_id entry to calculate where to
write in the array, thereby silencing the warning.
Signed-off-by: NIan Munsie <imunsie@au.ibm.com>
Cc: Armin Schindler <mac@melware.de>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The parenthesis was misplaced.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Access to fp->tx_bp_prod is protected by __netif_tx_lock,
smp_mb() is not needed for that.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Access to fp->tx_bd_prod is protected by __netif_tx_lock, so we do not
need any barrier for that.

Update of fp->tx_bd_cons in bnx2x_tx_int() is not protected by lock, but
barrier() nor smb_mb() in bnx2x_tx_avail() not guarantee we will see
values that is written on other cpu. Ordering issues between
netif_tx_stop_queue(), netif_tx_queue_stopped(), fp->tx_bd_cons = bd_cons
and bnx2x_tx_avail() are already handled by smp_mb() in bnx2x_tx_int()
and bnx2x_start_xmit().
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we want to keep ordering of write to fp->bd_tx_cons and
netif_tx_queue_stopped(txq), what is read of txq->state, we have to use
general memory barrier.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The request to create an mccq was being dispatched without
doing a byte swap of num_pages. This byte swap is necessary
for Big Endian systems like PPC. Not having this fix leads
mccq create to fail on BE ASICs running newer version of
firmware, thereby causing driver initialization failure.
Signed-off-by: NAjit Khaparde <ajitk@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Migrate from the legacy PM hooks to use dev_pm_ops structure.
Signed-off-by: NChaithrika U S <chaithrika@ti.com>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The davinci emac driver uses some ARM specific DMA APIs
for cache coherency which have been removed from kernel
with the 2.6.34 merge.

Modify the driver to use the dma_{map, unmap}_single() APIs
defined in dma-mapping.h

Without this fix, the driver fails to compile on Linus's
tree.

Tested on DM365 and OMAP-L138 EVMs.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the PCI pool changes were added to fix resume failures:

commit 98468efd
e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failu

and

commit 70abc8cb
e100: Fix broken cbs accounting due to missing memset.

This introduced a problem that can happen if the TX ring size
is increased.  We need to size the PCI pool using cbs->max
instead of the default cbs->count value.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI: processor: push file static MADT pointer into internal map_madt_entry()
  ACPI: processor: refactor internal map_lsapic_id()
  ACPI: processor: refactor internal map_x2apic_id()
  ACPI: processor: refactor internal map_lapic_id()
  ACPI: processor: driver doesn't need to evaluate _PDC
  ACPI: processor: remove early _PDC optin quirks
  ACPI: processor: add internal processor_physically_present()
  ACPI: processor: move acpi_get_cpuid into processor_core.c
  ACPI: processor: export acpi_get_cpuid()
  ACPI: processor: mv processor_pdc.c processor_core.c
  ACPI: processor: mv processor_core.c processor_driver.c
  ACPI: plan to delete "acpi=ht" boot option
  ACPI: remove "acpi=ht" DMI blacklist
  PNPACPI: add bus number support
  PNPACPI: add window support
  resource: add window support
  resource: add bus number support
  resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type
  acpiphp: Execute ACPI _REG method for hotadded devices
  ACPI video: Be more liberal in validating _BQC behaviour
  ...