Check and handle init errors.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check driver layer errors.

Fix from: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>

In blockdevc-check-errors.patch, add_bd_holder() is modified to return error
values when some of its operation failed.  Among them, it returns -EEXIST when
a given bd_holder object already exists in the list.

However, in this case, the function completed its work successfully and need
no action by its caller other than freeing unused bd_holder object.  So I
think it's better to return success after freeing by itself.

Otherwise, bd_claim-ing with same claim pointer will fail.
Typically, lvresize will fails with following message:
  device-mapper: reload ioctl failed: Invalid argument
and you'll see messages like below in kernel log:
  device-mapper: table: 254:13: linear: dm-linear: Device lookup failed
  device-mapper: ioctl: error adding target to table

Similarly, it should not add bd_holder to the list if either one of symlinking
fails.  I don't have a test case for this to happen but it should cause
dereference of freed pointer.

If a matching bd_holder is found in bd_holder_list, add_bd_holder() completes
its job by just incrementing the reference count.  In this case, it should be
considered as success but it used to return 'fail' to let the caller free
temporary bd_holder.  Fixed it to return success and free given object by
itself.

Also, if either one of symlinking fails, the bd_holder should not be added to
the list so that it can be discarded later.  Otherwise, the caller will free
bd_holder which is in the list.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check driver layer return values in kernel/params.c
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andi is making pte_mkexec go away, and UML had one of the last uses.

This removes the use and the definition.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the existing random_ether_addr() instead of cooking up my own
version.  Pointed out by Dave Hollis and Jason Lunz.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove arch/um/kernel/skas/process_kern.c again.  The stack alignment
change which resulted in this file being here is safely in
arch/um/kernel/process.c.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some stack abuse in the sysrq t path.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Close two file descriptor leaks, one in the ubd driver and one to
/proc/mounts.  The ubd driver bug also leaked some vmalloc space.  The
/proc/mounts leak was a descriptor that was just never closed.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some locking documentation and a cleanup.  uml_exitcode is copied into a local
before sprintf sees it, in case sprintf does anything non-atomic with it.

The rest are comments about why certain globals don't need any kind of
locking.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mechanical, hopefully non-functional changes stemming from
setup_etheraddr always succeeding now that it always assigns a MAC,
either from the command line or generated randomly:
   the test of the return of setup_etheraddr is removed, and code
dependent on it succeeding is now unconditional
   setup_etheraddr can now be made void
   struct uml_net.have_mac is now always 1, so tests of it can be
similarly removed, and uses of it can be replaced with 1
   struct uml_net.have_mac is no longer used, so it can be removed
   struct uml_net_private.have_mac is copied from struct uml_net, so
it is always 1
   tests of uml_net_private.have_mac can be removed
   uml_net_private.have_mac can now be removed
   the only call to dev_ip_addr was removed, so it can be deleted

It also turns out that setup_etheraddr is called only once, from the same
file, so it can be static and its declaration removed from net_kern.h.

Similarly, set_ether_mac is defined and called only from one file.

Finally, setup_etheraddr and set_ether_mac were moved to avoid needing forward
declarations.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Assign a random MAC to an ethernet interface if one was not provided on the
command line.  This became pressing when distros started bringing interfaces
up before assigning IPs to them.  The previous pattern of assigning an IP then
bringing it up allowed the MAC to be generated from the first IP assigned.
However, once the thing is up, it's probably a bad idea to change the MAC, so
the MAC stayed initialized to fe:fd:0:0:0:0.

Now, if there is no MAC from the command line, one is generated.  We use the
microseconds from gettimeofday (20 bits), plus the low 12 bits of the pid to
seed the random number generator.  random() is called twice, with 16 bits of
each result used.  I didn't want to have to try to fill in 32 bits optimally
given an arbitrary RAND_MAX, so I just assume that it is greater than 65536
and use 16 bits of each random() return.

There is also a bit of reformatting and whitespace cleanup here.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert the i386 summit subarch apicid_to_node to use node information
provided by the SRAT.  It was discussed a little on LKML a few weeks ago
and was seen as an acceptable fix.  The current way of obtaining the nodeid

 static inline int apicid_to_node(int logical_apicid)
 {
   return logical_apicid >> 5;
 }

is just not correct for all summit systems/bios.  Assuming the apicid
matches the Linux node number require a leap of faith that the bios mapped
out the apicids a set way.  Modern summit HW (IBM x460) does not layout its
bios in the manner for various reasons and is unable to boot i386 numa.

The best way to get the correct apicid to node information is from the SRAT
table during boot.  It lays out what apicid belongs to what node.  I use
this information to create a table for use at run time.
Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allows commas to be embedded into context mount options (i.e.  "-o
context=some_selinux_context_t"), to better support multiple categories,
which are separated by commas and confuse mount.

For example, with the current code:

  mount -t iso9660 /dev/cdrom /media/cdrom -o \
  ro,context=system_u:object_r:iso9660_t:s0:c1,c3,c4,exec

The context option that will be interpreted by SELinux is
context=system_u:object_r:iso9660_t:s0:c1

instead of
context=system_u:object_r:iso9660_t:s0:c1,c3,c4

The options that will be passed on to the file system will be
ro,c3,c4,exec.

The proposed solution is to allow/require the SELinux context option
specified to mount to use quotes when the context contains a comma.

This patch modifies the option parsing in parse_opts(), contained in
mount.c, to take options after finding a comma only if it hasn't seen a
quote or if the quotes are matched.  It also introduces a new function that
will strip the quotes from the context option prior to translation.  The
quotes are replaced after the translation is completed to insure that in
the event the raw context contains commas the kernel will be able to
interpret the correct context.
Signed-off-by: NCory Olmo <colmo@TrustedCS.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't open-code NOPAGE_SIGBUS.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Failing context is a multi threaded process context and the failing
sequence is as follows.

One thread T0 doing self modifying code on page X on processor P0 and
another thread T1 doing COW (breaking the COW setup as part of just
happened fork() in another thread T2) on the same page X on processor P1.
T0 doing SMC can endup modifying the new page Y (allocated by the T1 doing
COW on P1) but because of different I/D TLB's, P0 ITLB will not see the new
mapping till the flush TLB IPI from P1 is received.  During this interval,
if T0 executes the code created by SMC it can result in an app error (as
ITLB still points to old page X and endup executing the content in page X
rather than using the content in page Y).

Fix this issue by first clearing the PTE and flushing it, before updating
it with new entry.

Hugh sayeth:

  I was a bit sceptical, in the habit of thinking that Self Modifying Code
  must look such issues itself: but I guess there's nothing it can do to avoid
  this one.

  Fair enough, what you're changing it to is pretty much what powerpc and
  s390 were already doing, and is a more robust way of proceeding, consistent
  with how ptes are set everywhere else.

  The ptep_clear_flush is a bit heavy-handed (it's anxious to return the pte
  that was atomically cleared), but we'd have to wander through lots of arches
  to get the right minimal behaviour.  It'd also be nice to eliminate
  ptep_establish completely, now only used to define other macros/inlines: it
  always seemed obfuscation to me, what you've got there now is clearer.
  Let's put those cleanups on a TODO list.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Acked-by: NHugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert s390 page handling macros to functions.  In particular this fixes a
problem with s390's SetPageUptodate macro which uses its input parameter
twice which again can cause subtle bugs.

[akpm@osdl.org: build fix]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We leak a bh ref in "journal_init_dev()" in case of failure.
Signed-off-by: NZoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's always good to make symbols static when we can, and this also eliminates
the need to rename the function in jbd2

Suggested by Eric Sandeen.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The uninitialised pmu_backlight_lock causes the current Fedora test kernel
(which has spinlock debugging enabled) to panic on suspend.

This is suboptimal, so I fixed it.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the cpu has the lock held for write, is interrupted, and the interrupt
handler calls read_trylock(), it's an instant deadlock.

Now, Dave Miller has subsequently pointed out that we don't have any
situations where this can occur.  Nevertheless, we should delete
generic__raw_read_lock (and its associated EXPORT to make Arjan happy) so that
nobody thinks they can use it.
Acked-by: N"David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

...  or we'll end up with cpu_online_map being evaluated on UP.  In
modules.  cpumask.h is very careful to avoid that, and for a very good
reason.  So should we...

PS: yes, it really triggers (on alpha).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (160 commits)
  [ETHTOOL]: Remove some entries from non-root command list.
  [Bluetooth]: Fix section mismatch of bt_sysfs_cleanup()
  [Bluetooth]: Don't update disconnect timer for incoming connections
  [ETHTOOL]: let mortals use ethtool
  [NetLabel]: add audit support for configuration changes
  [TCP]: Fix and simplify microsecond rtt sampling
  [TCP] tcp-lp: prevent chance for oops
  [SUNRPC]: Remove unnecessary check in net/sunrpc/svcsock.c
  [IPVS] bug: endianness breakage in ip_vs_ftp
  [IPVS]: ipvs annotations
  [NETFILTER]: h323 annotations
  [NETFILTER]: ipt annotations
  [NETFILTER]: NAT annotations
  [NETFILTER]: conntrack annotations
  [NETFILTER]: netfilter misc annotations
  [NET]: Annotate dst_ops protocol
  [NET]: is it Andy or Andi ??
  [IPVS]: Make sure ip_vs_ftp ports are valid: module_param_array approach
  [IPVS]: Reverse valid ip_vs_ftp ports fix: port check approach
  [IrDA] stir4200: removing undocumented bits handling
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix build error in ohci driver

GWOL might provide passwords
GSET, GLINK, and GSTATS might poke the hardware

Based upon feedback from Jeff Garzik.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bt_sysfs_cleanup() is marked with __exit attribute, but it will
be called from an __init function in the error case. So the __exit
attribute must be removed.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the case of device pairing the only safe method is to establish
a low-level ACL link. In this case, the remote side should not use
the disconnect timer to give the other side the chance to enter the
PIN code. If the disconnect timer is used, the connection will be
dropped to soon, because it is impossible to identify an actual user
of this link.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason to not allow non-admin users to query network
statistics and settings.

[ Removed PHYS_ID and GREGS based upon feedback from Auke Kok
  and Michael Chan -DaveM]
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds audit support to NetLabel, including six new audit message
types shown below.

 #define AUDIT_MAC_UNLBL_ACCEPT 1406
 #define AUDIT_MAC_UNLBL_DENY   1407
 #define AUDIT_MAC_CIPSOV4_ADD  1408
 #define AUDIT_MAC_CIPSOV4_DEL  1409
 #define AUDIT_MAC_MAP_ADD      1410
 #define AUDIT_MAC_MAP_DEL      1411
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes the microsecond RTT sampling so that samples are taken in
the same way that RTT samples are taken for the RTO calculator: on the
last segment acknowledged, and only when the segment hasn't been
retransmitted.
Signed-off-by: NJohn Heffner <jheffner@psc.edu>
Acked-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix the chance for tcp_lp_remote_hz_estimator return 0, if
0 < rhz < 64. It also make sure the flag LP_VALID_RHZ is set
correctly.
Signed-off-by: NWong Hoi Sing Edison <hswong3i@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

coverity spotted this one as possible dereference in the dprintk(),
but since there is only one caller of svc_create_socket(), which always
passes a valid sin, we dont need this check.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(p[3]<<24) | (p[2]<<16) | (p[1]<<8) | p[0] is not a valid
way to spell get_unaligned((__be32 *)p
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>