Note in the databook - Section 4.4 - EEE :
" The EEE feature is not supported when the MAC is configured to use the
TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC
supports multiple PHY interfaces, you should activate the EEE mode only
when the MAC is operating with GMII, MII, or RGMII interface."

Applying this restriction solves a stability issue observed on Amlogic
gxl platforms operating with RMII interface and the internal PHY.

Fixes: 83bf79b6 ("stmmac: disable at run-time the EEE if not supported")
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Tested-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function is used from two places: rtnl_dump_ifinfo and
rtnl_getlink. In rtnl_getlink(), we give a request skb into
get_target_net(), but in rtnl_dump_ifinfo, we give a response skb
into get_target_net().
The problem here is that NETLINK_CB() isn't initialized for the response
skb. In both cases we can get a user socket and give it instead of skb
into get_target_net().

This bug was found by syzkaller with this call-trace:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 3149 Comm: syzkaller140561 Not tainted 4.15.0-rc4-mm1+ #47
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__netlink_ns_capable+0x8b/0x120 net/netlink/af_netlink.c:868
RSP: 0018:ffff8801c880f348 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8443f900
RDX: 000000000000007b RSI: ffffffff86510f40 RDI: 00000000000003d8
RBP: ffff8801c880f360 R08: 0000000000000000 R09: 1ffff10039101e4f
R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86510f40
R13: 000000000000000c R14: 0000000000000004 R15: 0000000000000011
FS:  0000000001a1a880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020151000 CR3: 00000001c9511005 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  netlink_ns_capable+0x26/0x30 net/netlink/af_netlink.c:886
  get_target_net+0x9d/0x120 net/core/rtnetlink.c:1765
  rtnl_dump_ifinfo+0x2e5/0xee0 net/core/rtnetlink.c:1806
  netlink_dump+0x48c/0xce0 net/netlink/af_netlink.c:2222
  __netlink_dump_start+0x4f0/0x6d0 net/netlink/af_netlink.c:2319
  netlink_dump_start include/linux/netlink.h:214 [inline]
  rtnetlink_rcv_msg+0x7f0/0xb10 net/core/rtnetlink.c:4485
  netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2441
  rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4540
  netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline]
  netlink_unicast+0x4be/0x6a0 net/netlink/af_netlink.c:1334
  netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897

Cc: Jiri Benc <jbenc@redhat.com>
Fixes: 79e1ad14 ("rtnetlink: use netnsid to query interface")
Signed-off-by: NAndrei Vagin <avagin@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPravin Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2018-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two fixes:
 * drop mesh frames appearing to be from ourselves
 * check another netlink attribute for existence
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Models such as BCM5395/97/98 and BCM53125/24/53115 and compatible require that
we turn on managed mode to actually act on Broadcom tags, otherwise they just
pass them through on ingress (host -> switch) and don't insert them in egress
(switch -> host). Turning on managed mode is simple, but requires us to
properly support ARL misses on multicast addresses which is a much more
involved set of changes not suitable for a bug fix for this release.
Reported-by: NJochen Friedrich <jochen@scram.de>
Fixes: 7edc58d6 ("net: dsa: b53: Turn on Broadcom tags")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there are multiple mesh stations with the same MAC address,
they will both get confused and start throwing warnings.

Obviously in this case nothing can actually work anyway, so just
drop frames that look like they're from ourselves early on.
Reported-by: NGui Iribarren <gui@altermundi.net>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

nl80211_nan_add_func() does not check if the required attribute
NL80211_NAN_FUNC_FOLLOW_UP_DEST is present when processing
NL80211_CMD_ADD_NAN_FUNCTION request. This request can be issued
by users with CAP_NET_ADMIN privilege and may result in NULL dereference
and a system crash. Add a check for the required attribute presence.
Signed-off-by: NHao Chen <flank3rsky@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-01-03

This series contains fixes for i40e and i40evf.

Amritha removes the UDP support for big buffer cloud filters since it is
not supported and having UDP enabled is a bug.

Alex fixes a bug in the __i40e_chk_linearize() which did not take into
account large (16K or larger) fragments that are split over 2 descriptors,
which could result in a transmit hang.

Jake fixes an issue where a devices own MAC address could be removed from
the unicast address list, so force a check on every address sync to ensure
removal does not happen.

Jiri Pirko fixes the return value when a filter configuration is not
supported, do not return "invalid" but return "not supported" so that
the core can react correctly.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few spots in 3c59x missed calls to dma_mapping_error checks, casuing
WARN_ONS to trigger.  Clean those up.  While we're at it, refactor the
refill code a bit so that if skb allocation or dma mapping fails, we
recycle the existing buffer.  This prevents holes in the rx ring, and
makes for much simpler logic

Note: This is compile only tested.  Ted, if you could run this and
confirm that it continues to work properly, I would appreciate it, as I
currently don't have access to this hardware
Signed-off-by: NNeil Horman <nhorman@redhat.com>
CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
CC: "David S. Miller" <davem@davemloft.net>
Reported-by: tedheadster@gmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netanel Belgazal says:

====================
bug fixes for ENA Ethernet driver

Changes from V1:
Revome incorrect "ena: invoke netif_carrier_off() only after netdev
  registered" patch

This patchset contains 2 bug fixes:
* handle rare race condition during MSI-X initialization
* fix error processing in ena_down()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ENA admin command queue errors are not handled as part of ena_down().
As a result, in case of error admin queue transitions to non-running
state and aborts all subsequent commands including those coming from
ena_up(). Reset scheduled by the driver from the timer service
context would not proceed due to sharing rtnl with ena_up()/ena_down()
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under certain conditions MSI-X interrupt might arrive right after it
was unmasked in ena_up(). There is a chance it would be processed by
the driver before device ENA_FLAG_DEV_UP flag is set. In such a case
the interrupt is ignored.
ENA device operates in auto-masked mode, therefore ignoring
interrupt leaves it masked for good.
Moving unmask of interrupt to be the last step in ena_up().
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 96ac18f1 ("cxgb4: Add support for new flash parts")
removed initialization of adapter->params.sf_fw_start causing issues
while flashing firmware to card. We no longer need sf_fw_start
in adapter->params as we already have macros defined for FW flash
addresses.

Fixes: 96ac18f1 ("cxgb4: Add support for new flash parts")
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When filter configuration is not supported, drivers should return
-EOPNOTSUPP so the core can react correctly.

Fixes: 2f4b411a ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In some circumstances, such as with bridging, it is possible that the
stack will add a devices own MAC address to its unicast address list.

If, later, the stack deletes this address, then the i40e driver will
receive a request to remove this address.

The driver stores its current MAC address as part of the MAC/VLAN hash
array, since it is convenient and matches exactly how the hardware
expects to be told which traffic to receive.

This causes a problem, since for more devices, the MAC address is stored
separately, and requests to delete a unicast address should not have the
ability to remove the filter for the MAC address.

Fix this by forcing a check on every address sync to ensure we do not
remove the device address.

There is a very narrow possibility of a race between .set_mac and
.set_rx_mode, if we don't change netdev->dev_addr before updating our
internal MAC list in .set_mac. This might be possible if .set_rx_mode is
going to remove MAC "XYZ" from the list, at the same time as .set_mac
changes our dev_addr to MAC "XYZ", we might possibly queue a delete,
then an add in .set_mac, then queue a delete in .set_rx_mode's
dev_uc_sync and then update netdev->dev_addr. We can avoid this by
moving the copy into dev_addr prior to the changes to the MAC filter
list.

A similar race on the other side does not cause problems, as if we're
changing our MAC form A to B, and we race with .set_rx_mode, it could
queue a delete from A, we'd update our address, and allow the delete.
This seems like a race, but in reality we're about to queue a delete of
A anyways, so it would not cause any issues.

A race in the initialization code is unlikely because the netdevice has
not yet been fully initialized and the stack should not be adding or
removing addresses yet.

Note that we don't (yet) need similar code for the VF driver because it
does not make use of __dev_uc_sync and __dev_mc_sync, but instead roles
its own method for handling updates to the MAC/VLAN list, which already
has code to protect against removal of the hardware address.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The original code for __i40e_chk_linearize didn't take into account the
fact that if a fragment is 16K in size or larger it has to be split over 2
descriptors and the smaller of those 2 descriptors will be on the trailing
edge of the transmit. As a result we can get into situations where we didn't
catch requests that could result in a Tx hang.

This patch takes care of that by subtracting the length of all but the
trailing edge of the stale fragment before we test for sum. By doing this
we can guarantee that we have all cases covered, including the case of a
fragment that spans multiple descriptors. We don't need to worry about
checking the inner portions of this since 12K is the maximum aligned DMA
size and that is larger than any MSS will ever be since the MTU limit for
jumbos is something on the order of 9K.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fugang Duan says:

====================
net: fec: clean up in the cases of probe error

The simple patches just clean up in the cases of probe error like restore dev_id and
handle the defer probe when regulator is still not ready.

v2:
* Fabio Estevam's comment to suggest split v1 to separate patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Defer probe if regulator is not ready. E.g. some regulator is fixed
regulator controlled by i2c expander gpio, the i2c device may be probed
after the driver, then it should handle the case of defer probe error.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The static variable dev_id always plus one before netdev registerred.
It should restore the dev_id value in the cases of probe error.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since UDP based filters are not supported via big buffer cloud
filters, remove UDP support.  Also change a few return types to
indicate unsupported vs invalid configuration.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix indentation of reserved_flags2 field in vxlanhdr_gpe.

Fixes: e1e5314d ("vxlan: implement GPE")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot noticed a NULL pointer dereference panic in sctp_stream_free()
which was caused by an incomplete error handling in sctp_stream_init().
By not clearing stream->outcnt, it made a for() in sctp_stream_free()
think that it had elements to free, but not, leading to the panic.

As suggested by Xin Long, this patch also simplifies the error path by
moving it to the only if() that uses it.

See-also: https://www.spinics.net/lists/netdev/msg473756.html
See-also: https://www.spinics.net/lists/netdev/msg465024.htmlReported-by: Nsyzbot <syzkaller@googlegroups.com>
Fixes: f952be79 ("sctp: introduce struct sctp_stream_out_ext")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-01-02

This series contains fixes for e1000 and e1000e.

Tushar Dave adds a check to the driver so that it won't attempt to disable a
device that is already disabled for e1000.

Benjamin Poirier provides a fix to e1000e, where a previous commit that
Benjamin submitted changed the meaning of the return value for
"check_for_link" for copper media and not all the instances were properly
updated.  Benjamin fixes the remaining instances that needed the change.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When args->nr_local is 0, nr_pages gets also 0 due some size
calculation via rds_rm_size(), which is later used to allocate
pages for DMA, this bug produces a heap Out-Of-Bound write access
to a specific memory region.
Signed-off-by: NMohamed Ghannam <simo.ghannam@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

libc-compat.h aims to prevent symbol collisions between uapi and libc
headers for each supported libc. This requires continuous coordination
between them.

The goal of this commit is to improve the situation for libcs (such as
musl) which are not yet supported and/or do not wish to be explicitly
supported, while not affecting supported libcs. More precisely, with
this commit, unsupported libcs can request the suppression of any
specific uapi definition by defining the correspondings _UAPI_DEF_*
macro as 0. This can fix symbol collisions for them, as long as the
libc headers are included before the uapi headers. Inclusion in the
other order is outside the scope of this commit.

All infrastructure in order to enable this fallback for unsupported
libcs is already in place, except that libc-compat.h unconditionally
defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that
any previous definitions are ignored. In order to fix this, this commit
merely makes these definitions conditional.

This commit together with the musl libc commit

http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258

fixes for example the following compiler errors when <linux/in6.h> is
included after musl's <netinet/in.h>:

./linux/in6.h:32:8: error: redefinition of 'struct in6_addr'
./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6'
./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq'

The comments referencing glibc are still correct, but this file is not
only used for glibc any more.
Signed-off-by: NFelix Janda <felix.janda@posteo.de>
Reviewed-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 04d7b574 ("tipc: add multipoint-to-point flow control") we
introduced a protocol for preventing buffer overflow when many group
members try to simultaneously send messages to the same receiving member.

Stress test of this mechanism has revealed a couple of related bugs:

- When the receiving member receives an advertisement REMIT message from
  one of the senders, it will sometimes prematurely activate a pending
  member and send it the remitted advertisement, although the upper
  limit for active senders has been reached. This leads to accumulation
  of illegal advertisements, and eventually to messages being dropped
  because of receive buffer overflow.

- When the receiving member leaves REMITTED state while a received
  message is being read, we miss to look at the pending queue, to
  activate the oldest pending peer. This leads to some pending senders
  being starved out, and never getting the opportunity to profit from
  the remitted advertisement.

We fix the former in the function tipc_group_proto_rcv() by returning
directly from the function once it becomes clear that the remitting
peer cannot leave REMITTED state at that point.

We fix the latter in the function tipc_group_update_rcv_win() by looking
up and activate the longest pending peer when it becomes clear that the
remitting peer now can leave REMITTED state.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In kernel log ths message appears on every boot:
 "warning: `NetworkChangeNo' uses legacy ethtool link settings API,
  link modes are only partially reported"

When ethtool link settings API changed, it started complaining about
usages of old API. Ironically, the original patch was from google but
the application using the legacy API is chrome.

Linux ABI is fixed as much as possible. The kernel must not break it
and should not complain about applications using legacy API's.
This patch just removes the warning since using legacy API's
in Linux is perfectly acceptable.

Fixes: 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid Decotigny <decot@googlers.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for PID 0x9625 of YUGA CLM920-NC5.

YUGA CLM920-NC5 needs to enable QMI_WWAN_QUIRK_DTR before QMI operation.

qmicli -d /dev/cdc-wdm0 -p --dms-get-revision
[/dev/cdc-wdm0] Device revision retrieved:
        Revision: 'CLM920_NC5-V1  1  [Oct 23 2016 19:00:00]'
Signed-off-by: NSZ Lin (林上智) <sz.lin@moxa.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
are the two functions that may be assigned to mac.ops.check_for_link when
phy.media_type == e1000_media_type_copper. Commit 19110cfb ("e1000e:
Separate signaling for link check/link up") changed the meaning of the
return value of check_for_link for copper media but only adjusted the first
function. This patch adjusts the second function likewise.
Reported-by: NChristian Hesse <list@eworm.de>
Reported-by: NGabriel C <nix.or.die@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047
Fixes: 19110cfb ("e1000e: Separate signaling for link check/link up")
Signed-off-by: NBenjamin Poirier <bpoirier@suse.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Tested-by: NChristian Hesse <list@eworm.de>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds check so that driver does not disable already
disabled device.

[   44.637743] advantechwdt: Unexpected close, not stopping watchdog!
[   44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[   45.013419] e1000 0000:00:03.0: disabling already-disabled device
[   45.013447] ------------[ cut here ]------------
[   45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105:
						pci_disable_device at drivers/pci/pci.c:1640
[   45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c073991 #1
[   45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000
[   45.017987] RIP: 0010:pci_disable_device+0xa1/0x105:
						pci_disable_device at drivers/pci/pci.c:1640
[   45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286
[   45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000
[   45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203
[   45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000
[   45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001
[   45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f
[   45.023842] FS:  0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[   45.024863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0
[   45.026478] Call Trace:
[   45.026811]  __e1000_shutdown+0x1d4/0x1e2:
						__e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162
[   45.027344]  ? rcu_perf_cleanup+0x2a1/0x2a1:
						rcu_perf_shutdown at kernel/rcu/rcuperf.c:627
[   45.027883]  e1000_shutdown+0x14/0x3a:
						e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235
[   45.028351]  device_shutdown+0x110/0x1aa:
						device_shutdown at drivers/base/core.c:2807
[   45.028858]  kernel_power_off+0x31/0x64:
						kernel_power_off at kernel/reboot.c:260
[   45.029343]  rcu_perf_shutdown+0x9b/0xa7:
						rcu_perf_shutdown at kernel/rcu/rcuperf.c:637
[   45.029852]  ? __wake_up_common_lock+0xa2/0xa2:
						autoremove_wake_function at kernel/sched/wait.c:376
[   45.030414]  kthread+0x126/0x12e:
						kthread at kernel/kthread.c:233
[   45.030834]  ? __kthread_bind_mask+0x8e/0x8e:
						kthread at kernel/kthread.c:190
[   45.031399]  ? ret_from_fork+0x1f/0x30:
						ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.031883]  ? kernel_init+0xa/0xf5:
						kernel_init at init/main.c:997
[   45.032325]  ret_from_fork+0x1f/0x30:
						ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82
[   45.035222] ---[ end trace c257137b1b1976ef ]---
[   45.037838] ACPI: Preparing to enter system sleep state S5
Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com>
Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When we remove a socket or upstream, and the other side isn't
registered, we dereference a NULL pointer, causing a kernel oops.
Fix this.

Fixes: ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although we disable the netdev carrier, we fail to report in the kernel
log that the link went down.  Fix this.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because the macvlan_uninit would free the macvlan port, so there is one
double free case in macvlan_common_newlink. When the macvlan port is just
created, then register_netdevice or netdev_upper_dev_link failed and they
would invoke macvlan_uninit. Then it would reach the macvlan_port_destroy
which triggers the double free.
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to update lastuse to to the most updated value between what
is already set and the new value.
If HW matching fails, i.e. because of an issue, the stats are not updated
but it could be that software did match and updated lastuse.

Fixes: 5712bf9c ("net/sched: act_mirred: Use passed lastuse argument")
Fixes: 9fea47d9 ("net/sched: act_gact: Update statistics when offloaded to hardware")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NPaul Blakey <paulb@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 25cc72a3 ("mlxsw: spectrum: Forbid linking to devices that
have uppers") the driver forbids enslavement to netdevs that already
have uppers of their own, as this can result in various ordering
problems.

This requirement proved to be too strict for some users who need to be
able to enslave ports to a bridge that already has uppers. In this case,
we can allow the enslavement if the bridge is already known to us, as
any configuration performed on top of the bridge was already reflected
to the device.

Fixes: 25cc72a3 ("mlxsw: spectrum: Forbid linking to devices that have uppers")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Tested-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we remove the neighbour associated with a nexthop we should always
refuse to write the nexthop to the adjacency table. Regardless if it is
already present in the table or not.

Otherwise, we risk dereferencing the NULL pointer that was set instead
of the neighbour.

Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 582442d6 ("ipv6: Allow the MTU of ipip6 tunnel to be set
below 1280") fixed a mtu setting issue. It works for ipip6 tunnel.

But ip6gre dev updates the mtu also with ip6_tnl_change_mtu. Since
the inner packet over ip6gre can be ipv4 and it's mtu should also
be allowed to set below 1280, the same issue also exists on ip6gre.

This patch is to fix it by simply changing to check if parms.proto
is IPPROTO_IPV6 in ip6_tnl_change_mtu instead, to make ip6gre to
go to 'else' branch.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit a93bf0ff ("vxlan: update skb dst pmtu on tx path") has fixed
a performance issue caused by the change of lower dev's mtu for vxlan.

The same thing needs to be done for geneve as well.

Note that geneve cannot adjust it's mtu according to lower dev's mtu
when creating it. The performance is very low later when netperfing
over it without fixing the mtu manually. This patch could also avoid
this issue.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an ip6_tunnel is in mode 'any', where the transport layer
protocol can be either 4 or 41, dst_cache must be disabled.

This is because xfrm policies might apply to only one of the two
protocols. Caching dst would cause xfrm policies for one protocol
incorrectly used for the other.
Signed-off-by: NEli Cooper <elicooper@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 87c320e5.

Changing the error return code in some situations turns out to
be harmful in practice.  In particular Michael Ellerman reports
that DHCP fails on his powerpc machines, and this revert gets
things working again.

Johannes Berg agrees that this revert is the best course of
action for now.

Fixes: 029b6d14 ("Revert "net: core: maybe return -EEXIST in __dev_alloc_name"")
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>