stable inclusion
from linux-4.19.226
commit 5e7fb994ccc7200e20d7f394aa3f082f4efb49ab

--------------------------------

[ Upstream commit 21ad0e49 ]

The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().

Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d0580 ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: NAlexey Dobriyan <adobriyan@gmail.com>
Tested-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 4208239d748b5a8f32d5c2323d6f385dcb7f9b9e

--------------------------------

[ Upstream commit 9abe2ac8 ]

Table descriptors were being installed without properly formatting the
address using paddr_to_iopte, which does not match up with the
iopte_deref in __arm_lpae_map. This is incorrect for the LPAE pte
format, as it does not handle the high bits properly.

This was found on Apple T6000 DARTs, which require a new pte format
(different shift); adding support for that to
paddr_to_iopte/iopte_to_paddr caused it to break badly, as even <48-bit
addresses would end up incorrect in that case.

Fixes: 6c89928f ("iommu/io-pgtable-arm: Support 52-bit physical address")
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NHector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211120031343.88034-1-marcan@marcan.stSigned-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 1105c2dac8cb45c297401e32884cbefc0f123301

--------------------------------

[ Upstream commit 173b6e38 ]

A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason.  After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.

CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62f ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: NJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.czSigned-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit e0b2cd310d0859907a9a7b4e4ef9a5bcce9d3d6d

--------------------------------

[ Upstream commit d668769e ]

Syzbot reported uninit value in mcs7830_bind(). The problem was in
missing validation check for bytes read via usbnet_read_cmd().

usbnet_read_cmd() internally calls usb_control_msg(), that returns
number of bytes read. Code should validate that requested number of bytes
was actually read.

So, this patch adds missing size validation check inside
mcs7830_get_reg() to prevent uninit value bugs

Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com
Fixes: 2a36d708 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter")
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit f155b0fbde518857ee2d42f1fbfda6bdf0123363

--------------------------------

[ Upstream commit 0ef333f5 ]

Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.

Fixes: e6aef069 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Reviewed-by: NJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit f0351a2178fa64f87e609c341f07bf4260b10daf

--------------------------------

[ Upstream commit d94a69cb ]

The issue takes place in one error path of clusterip_tg_check(). When
memcmp() returns nonzero, the function simply returns the error code,
forgetting to decrease the reference count of a clusterip_config
object, which is bumped earlier by clusterip_config_find_get(). This
may incur reference count leak.

Fix this issue by decrementing the refcount of the object in specific
error path.

Fixes: 06aa151a ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set")
Signed-off-by: NXin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: NXiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: NXin Tan <tanxin.ctf@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit a6ea2625df628d4d18b86f6ee21835c8962c8f23

--------------------------------

[ Upstream commit 68ac0f38 ]

xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.

With this commit:
 ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
 RTNETLINK answers: Invalid argument

 ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
            reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
            0x1111111111111111111111111111111111111111 96 if_id 0
 RTNETLINK answers: Invalid argument

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4 ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit f7594c07fb0270c5414460432d3344b8831789c2

--------------------------------

[ Upstream commit 8dce4391 ]

xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4.

Now explicitly fail to create an xfrm interface when if_id = 0

With this commit:
 ip link add ipsec0  type xfrm dev lo  if_id 0
 Error: if_id must be non zero.

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4 ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Reviewed-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit a803ac39fb163677b4eaf5317894a3dd62912b56

--------------------------------

[ Upstream commit 6c12e742 ]

Delete extraneous lines in probe error handling code: pm was
disabled twice.

Fixes: 65f9aa36 ("crypto: stm32/cryp - Add power management support")
Reported-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit fcb8f503d607d18b9fc69613e38358aae9f9fa99

--------------------------------

[ Upstream commit 7770a39d ]

copy_user_offload() will actually push a struct struct xfrm_user_offload,
which is different than (struct xfrm_state *)->xso
(struct xfrm_state_offload)

Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit e6bc7279b16517fab9ed3cdbd58ad7b08060c246

--------------------------------

[ Upstream commit 9b58e976 ]

When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:

  1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
  2. Run a FIFO task named A that executes while(1)
  3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us

When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.

Fixes: d0b27fa7 ("sched: rt-group: synchonised bandwidth period")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLi Hua <hucool.lihua@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203033618.11895-1-hucool.lihua@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 0d9a1f0245ed6cadb37fabdf204b67f230160ca0

--------------------------------

[ Upstream commit d1180405 ]

With commit 3873e2d7 ("drivers: PL011: refactor pl011_probe()") the
function devm_ioremap() called from pl011_setup_port() was replaced with
devm_ioremap_resource(). Since this function not only remaps but also
requests the ports io memory region it now collides with the .config_port()
callback which requests the same region at uart port registration.

Since devm_ioremap_resource() already claims the memory successfully, the
request in .config_port() fails.

Later at uart port deregistration the attempt to release the unclaimed
memory also fails. The failure results in a “Trying to free nonexistent
resource" warning.

Fix these issues by removing the callbacks that implement the redundant
memory allocation/release. Also make sure that changing the drivers io
memory base address via TIOCSSERIAL is not allowed any more.

Fixes: 3873e2d7 ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 628c2372100a118f5500f596c5c941720adbcc28

--------------------------------

[ Upstream commit 3672fb65 ]

The base address of uartlite registers could be 64 bit address which is from
device resource. When ulite_probe() calls ulite_assign(), this 64 bit
address is casted to 32-bit. The fix is to replace "u32" type with
"phys_addr_t" type for the base address in ulite_assign() argument list.

Fixes: 8fa7b610 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper")
Signed-off-by: NLizhi Hou <lizhi.hou@xilinx.com>
Link: https://lore.kernel.org/r/20211129202302.1319033-1-lizhi.hou@xilinx.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 519f563eca1b89965dd406a8f9807ca76562d202

--------------------------------

[ Upstream commit 28b78ecf ]

This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for
bridged traffic.

Looking at the original commit it doesn't appear this ever worked:

 static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb,
[..]
        if (skb->protocol == htons(ETH_P_8021Q)) {
                skb_pull(skb, VLAN_HLEN);
                skb->network_header += VLAN_HLEN;
+       } else if (skb->protocol == htons(ETH_P_PPP_SES)) {
+               skb_pull(skb, PPPOE_SES_HLEN);
+               skb->network_header += PPPOE_SES_HLEN;
        }
 [..]
	NF_HOOK(... POST_ROUTING, ...)

... but the adjusted offsets are never restored.

The alternative would be to rip this code out for good,
but otoh we'd have to keep this anyway for the vlan handling
(which works because vlan tag info is in the skb, not the packet
 payload).
Reported-and-tested-by: NAmish Chana <amish@3g.co.za>
Fixes: 516299d2 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 1aa6bac2dc1bce5f6afbb095c0ace374cc653947

--------------------------------

[ Upstream commit b4cb4d31 ]

Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.

Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: NChengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: NThara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 9a3354fc78b7d7a79026053272bb0b74900c28c1

--------------------------------

commit 62c9827c upstream.

Fix a data race in commit 779750d2 ("shmem: split huge pages beyond
i_size under memory pressure").

Here are call traces causing race:

   Call Trace 1:
     shmem_unused_huge_shrink+0x3ae/0x410
     ? __list_lru_walk_one.isra.5+0x33/0x160
     super_cache_scan+0x17c/0x190
     shrink_slab.part.55+0x1ef/0x3f0
     shrink_node+0x10e/0x330
     kswapd+0x380/0x740
     kthread+0xfc/0x130
     ? mem_cgroup_shrink_node+0x170/0x170
     ? kthread_create_on_node+0x70/0x70
     ret_from_fork+0x1f/0x30

   Call Trace 2:
     shmem_evict_inode+0xd8/0x190
     evict+0xbe/0x1c0
     do_unlinkat+0x137/0x330
     do_syscall_64+0x76/0x120
     entry_SYSCALL_64_after_hwframe+0x3d/0xa2

A simple explanation:

Image there are 3 items in the local list (@list).  In the first
traversal, A is not deleted from @list.

  1)    A->B->C
        ^
        |
        pos (leave)

In the second traversal, B is deleted from @list.  Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread.  Then the @list is corrupted.

  2)    A->B->C
        ^  ^
        |  |
     evict pos (drop)

We should make sure the inode is either on the global list or deleted from
any local list before iput().

Fixed by moving inodes back to global list before we put them.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com
Fixes: 779750d2 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: NGang Li <ligang.bdlg@bytedance.com>
Reviewed-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.226
commit 79305a826f872fe446c6fbf8450f515053ef6951

--------------------------------

commit bf74aa86 upstream.

This patch switches the timer to HRTIMER_MODE_SOFT, which executed the
timer callback in softirq context and removes the hrtimer_tasklet.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit 6f1ce654347ad16977afcb315fd9a9114ed9739d

--------------------------------

[ Upstream commit c1833c39 ]

The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.

The UBSAN issue is as follows:

===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================

The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: NWilliam Zhao <wizhao@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit f5596fdc65ce280cb4debb507c0c5877d1a89936

--------------------------------

[ Upstream commit 1b8d0300 ]

|- iscsi_if_destroy_conn            |-dev_attr_show
 |-iscsi_conn_teardown
  |-spin_lock_bh                     |-iscsi_sw_tcp_conn_get_param

  |-kfree(conn->persistent_address)   |-iscsi_conn_get_param
  |-kfree(conn->local_ipaddr)
                                       ==>|-read persistent_address
                                       ==>|-read local_ipaddr
  |-spin_unlock_bh

When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.

Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.comReported-by: NLu Tixiong <lutianxiong@huawei.com>
Reviewed-by: NMike Christie <michael.christie@oracle.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NLixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: NLinfeilong <linfeilong@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit dd74b4e027324219e51d9821c0db4368c9f8526a

--------------------------------

[ Upstream commit 95bdba23 ]

As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.

Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: NDavid Ahern <dsahern@kernel.org>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit e183929b7db0e84a48fdc009a7bcbf9137ad9061

--------------------------------

[ Upstream commit e30a845b ]

ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.

Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: NDavid Ahern <dsahern@kernel.org>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit e30dead00aaa5a575b10117dad8edc126efc1873

--------------------------------

commit 1ff15a71 upstream.

Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.

Fixes: 6b9ea5a6 ("ipv6: fix multipath route replace error recovery")
Signed-off-by: NDavid Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit 44c90b4e6bcbb10f4066b91e8da9c58d4609768c

--------------------------------

commit 4619bcf9 upstream.

Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.

Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: NDavid Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit e9c3f28e2b9eaff371db65e4bd7ee170616147b4

--------------------------------

commit f28439db upstream.

Tag trace_percpu_buffer as a percpu pointer to resolve warnings
reported by sparse:
  /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3218:46:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3218:46:    got struct trace_buffer_struct *
  /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3234:9:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3234:9:    got int *

Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Reported-by: Nkernel test robot <lkp@intel.com>
Fixes: 07d777fe ("tracing: Add percpu buffers for trace_printk()")
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.225
commit 24bb91f9536f79a13f85cfaae59be41fc8d9380d

--------------------------------

commit 823e670f upstream.

With the new osnoise tracer, we are seeing the below splat:
    Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0)
    BUG: Unable to handle kernel data access on read at 0xc7d880000
    Faulting instruction address: 0xc0000000002ffa10
    Oops: Kernel access of bad area, sig: 11 [#1]
    LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
    ...
    NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0
    LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0
    Call Trace:
    [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable)
    [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90
    [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290
    [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710
    [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130
    [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270
    [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180
    [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278

osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().

The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.

Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: e2ace001 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.224
commit a8e1944b44f94f5c5f530e434c5eaee787254566

--------------------------------

commit e22e45fc upstream.

A real world panic issue was found as follow in Linux 5.4.

    BUG: unable to handle page fault for address: ffffde49a863de28
    PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
    RIP: 0010:tw_timer_handler+0x20/0x40
    Call Trace:
     <IRQ>
     call_timer_fn+0x2b/0x120
     run_timer_softirq+0x1ef/0x450
     __do_softirq+0x10d/0x2b8
     irq_exit+0xc7/0xd0
     smp_apic_timer_interrupt+0x68/0x120
     apic_timer_interrupt+0xf/0x20

This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.

The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.

This bug is not introduced by commit f2bf415c ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e260 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.

Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.

[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

Fixes: 61a7e260 ("mib: put net statistics on struct net")
Signed-off-by: NMuchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.224
commit bbd9c7120c31c1aff6dcffdcce122773d163df72

--------------------------------

[ Upstream commit 736ef37f ]

The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().

skb->len contains network and transport header len here, we should use
only data len instead.

This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change

Fixes: 158390e4 ("udp: using datalen to cap max gso segments")
Signed-off-by: NCoco Li <lixiaoyan@google.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.224
commit c34a0b5b3bf01062eb5f2a47870c5ab57256bdfc

--------------------------------

commit 732bc2ff upstream.

Clang static analysis reports this warning

hooks.c:5765:6: warning: 4th function call argument is an uninitialized
                value
        if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

selinux_parse_skb() can return ok without setting proto.  The later call
to selinux_xfrm_postroute_last() does an early check of proto and can
return ok if the garbage proto value matches.  So initialize proto.

Cc: stable@vger.kernel.org
Fixes: eef9b416 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()")
Signed-off-by: NTom Rix <trix@redhat.com>
[PM: typo/spelling and checkpatch.pl description fixes]
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit 94cc1e8331973ee7a2b4336f7ba67f48c2877d0a

--------------------------------

commit 57690554 upstream.

Both __pkru_allows_write() and arch_set_user_pkey_access() shift
PKRU_WD_BIT (a signed constant) by up to 30 bits, hitting the
sign bit.

Use unsigned constants instead.

Clearly pkey 15 has not been used in combination with UBSAN yet.

Noticed by code inspection only.  I can't actually provoke the
compiler into generating incorrect logic as far as this shift is
concerned.

[
  dhansen: add stable@ tag, plus minor changelog massaging,

           For anyone doing backports, these #defines were in
	   arch/x86/include/asm/pgtable.h before 784a4661.
]

Fixes: 33a709b2 ("mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys")
Signed-off-by: NAndrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211216000856.4480-1-andrew.cooper3@citrix.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit eb84855d3e8799b67cdbadc7a5c53997cbfc3580

--------------------------------

commit 75d70d76 upstream.

If the workqueue allocation fails, the driver is marked as not initialized,
and timer and panic_notifier will be left registered.

Instead of removing those when workqueue allocation fails, do the workqueue
initialization before doing it, and cleanup srcu_struct if it fails.

Fixes: 1d49eb91 ("ipmi: Move remove_work to dedicated workqueue")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-2-cascardo@canonical.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit db0d90490674c297a2e15a1ca3e40cd6975c30dc

--------------------------------

commit 2b5160b1 upstream.

In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.

Fixes: 913a89f0 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit 4e4591490f8a930e11131514db4cce4201ffc8a5

--------------------------------

[ Upstream commit 1c15b05b ]

When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.

An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.

Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit 925229d552724e1bba1abf01d3a0b1318539b012

--------------------------------

[ Upstream commit ffb76a86 ]

Hi,

When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko,
the system crashed.

The log as follows:
[  141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a
[  141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0
[  141.087464] Oops: 0010 [#1] SMP NOPTI
[  141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47
[  141.088009] Workqueue: events 0xffffffffc09b3a40
[  141.088009] RIP: 0010:0xffffffffc09b3a5a
[  141.088009] Code: Bad RIP value.
[  141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246
[  141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000
[  141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1
[  141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700
[  141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8
[  141.088009] FS:  0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000
[  141.088009] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0
[  141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  141.088009] PKRU: 55555554
[  141.088009] Call Trace:
[  141.088009]  ? process_one_work+0x195/0x390
[  141.088009]  ? worker_thread+0x30/0x390
[  141.088009]  ? process_one_work+0x390/0x390
[  141.088009]  ? kthread+0x10d/0x130
[  141.088009]  ? kthread_flush_work_fn+0x10/0x10
[  141.088009]  ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a
[  200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0
[  200.223464] Oops: 0010 [#1] SMP NOPTI
[  200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46
[  200.224008] Workqueue: events 0xffffffffc0b28a40
[  200.224008] RIP: 0010:0xffffffffc0b28a5a
[  200.224008] Code: Bad RIP value.
[  200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246
[  200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000
[  200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5
[  200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700
[  200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8
[  200.224008] FS:  0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000
[  200.224008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0
[  200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  200.224008] PKRU: 55555554
[  200.224008] Call Trace:
[  200.224008]  ? process_one_work+0x195/0x390
[  200.224008]  ? worker_thread+0x30/0x390
[  200.224008]  ? process_one_work+0x390/0x390
[  200.224008]  ? kthread+0x10d/0x130
[  200.224008]  ? kthread_flush_work_fn+0x10/0x10
[  200.224008]  ? ret_from_fork+0x35/0x40
[  200.224008] kernel fault(0x1) notification starting on CPU 63
[  200.224008] kernel fault(0x1) notification finished on CPU 63
[  200.224008] CR2: ffffffffc0b28a5a
[  200.224008] ---[ end trace c82a412d93f57412 ]---

The reason is as follows:
T1: rmmod ipmi_si.
    ->ipmi_unregister_smi()
        -> ipmi_bmc_unregister()
            -> __ipmi_bmc_unregister()
                -> kref_put(&bmc->usecount, cleanup_bmc_device);
                    -> schedule_work(&bmc->remove_work);

T2: rmmod ipmi_msghandler.
    ipmi_msghander module uninstalled, and the module space
    will be freed.

T3: bmc->remove_work doing cleanup the bmc resource.
    -> cleanup_bmc_work()
        -> platform_device_unregister(&bmc->pdev);
            -> platform_device_del(pdev);
                -> device_del(&pdev->dev);
                    -> kobject_uevent(&dev->kobj, KOBJ_REMOVE);
                        -> kobject_uevent_env()
                            -> dev_uevent()
                                -> if (dev->type && dev->type->name)

   'dev->type'(bmc_device_type) pointer space has freed when uninstall
    ipmi_msghander module, 'dev->type->name' cause the system crash.

drivers/char/ipmi/ipmi_msghandler.c:
2820 static const struct device_type bmc_device_type = {
2821         .groups         = bmc_dev_attr_groups,
2822 };

Steps to reproduce:
Add a time delay in cleanup_bmc_work() function,
and uninstall ipmi_si and ipmi_msghandler module.

2910 static void cleanup_bmc_work(struct work_struct *work)
2911 {
2912         struct bmc_device *bmc = container_of(work, struct bmc_device,
2913                                               remove_work);
2914         int id = bmc->pdev.id; /* Unregister overwrites id */
2915
2916         msleep(3000);   <---
2917         platform_device_unregister(&bmc->pdev);
2918         ida_simple_remove(&ipmi_bmc_ida, id);
2919 }

Use 'remove_work_wq' instead of 'system_wq' to solve this issues.

Fixes: b2cfd8ab ("ipmi: Rework device id and guid handling to catch changing BMCs")
Signed-off-by: NWu Bo <wubo40@huawei.com>
Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

stable inclusion
from linux-4.19.223
commit 5fefa884a55bd5995e77f4fdd89f0400f42b39f7

--------------------------------

[ Upstream commit 1ed1d592 ]

virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr
gso_type, to avoid packets getting dropped for lack of a proto type.

Its protocol choice is a guess, especially in the case of UFO, where
the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6.

Skip this best effort if the field is already initialized. Whether
explicitly from userspace, or implicitly based on an earlier call to
dev_parse_header_protocol (which is more robust, but was introduced
after this patch).

Fixes: 9d2f67e4 ("net/packet: fix packet drop as of virtio gso")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

----------------------------
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

mainline inclusion
from mainline-v5.6-rc6
commit 903b85d3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4W96A
CVE: NA

----------------------------

According to the user manual, the ingress and egress VLAN filter
are configured at the same time. Currently, hclge_init_vlan_config()
and hclge_set_vlan_spoofchk() will both change the VLAN filter
switch. So it's necessary to read the old configuration before
modifying it.

Fixes: fea4e7dc ("net: hns3: add support for spoof check setting")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4W90Z
CVE: NA

----------------------------

After a self test, the vlan filter of PF is wrongly closed,
cause the vlan filter out of work. The second parameter of
enable_vlan_filter() must pass true, and in enable_vlan_filter(),
it will decide whether to open or keep the status of vlan filter.

Fixes: 79549957 ("Revert: net: hns3: adds support for extended VLAN mode and 'QOS' in vlan 802.1Q protocol.")
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

mainline inclusion
from mainline-v5.8-rc1
commit a194c33f
category: bugfix
bugzilla: 89150
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a194c33f45f83068ef13bf1d16e26d4ca3ecc098

--------------------------------

Will reported a UBSAN warning:

UBSAN: null-ptr-deref in arch/arm64/kernel/smp.c:596:6
member access within null pointer of type 'struct acpi_madt_generic_interrupt'
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc6-00124-g96bc42ff0a82 #1
Call trace:
 dump_backtrace+0x0/0x384
 show_stack+0x28/0x38
 dump_stack+0xec/0x174
 handle_null_ptr_deref+0x134/0x174
 __ubsan_handle_type_mismatch_v1+0x84/0xa4
 acpi_parse_gic_cpu_interface+0x60/0xe8
 acpi_parse_entries_array+0x288/0x498
 acpi_table_parse_entries_array+0x178/0x1b4
 acpi_table_parse_madt+0xa4/0x110
 acpi_parse_and_init_cpus+0x38/0x100
 smp_init_cpus+0x74/0x258
 setup_arch+0x350/0x3ec
 start_kernel+0x98/0x6f4

This is from the use of the ACPI_OFFSET in
arch/arm64/include/asm/acpi.h. Replace its use with offsetof from
include/linux/stddef.h which should implement the same logic using
__builtin_offsetof, so that UBSAN wont warn.
Reported-by: NWill Deacon <will@kernel.org>
Suggested-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NJeremy Linton <jeremy.linton@arm.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20200521100952.GA5360@willie-the-truck/
Link: https://lore.kernel.org/r/20200608203818.189423-1-ndesaulniers@google.comSigned-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: Nlinyujun <linyujun809@huawei.com>
Reviewed-by: Nchenlifu <chenlifu@huawei.com>
Reviewed-by: NHe Ying <heying24@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

hulk inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4WOPM
CVE: NA

--------------------------------

cfs_bandwidth_usage_inc() need hold jump_label_mutex and
might sleep, so we can not call it in atomic context.
Fix this by moving cfs_bandwidth_usage_{inc,dec}() out of
rcu read critical section.

Fixes: f7b390cd ("sched: Change cgroup task scheduler policy")
Signed-off-by: NZhang Qiao <zhangqiao22@huawei.com>
Reviewed-by: NChen Hui <judy.chenhui@huawei.com>
Reviewed-by: NWang Weiyang <wangweiyang2@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>

mainline inclusion
from mainline-v5.9-rc7
commit 8f3d7496
category: bugfix
bugzilla: 186136, https://gitee.com/openeuler/kernel/issues/I4RM1D
CVE: NA

-------------------------------------------------

If we already have mapped the necessary data for retry, then don't set
it up again. It's a pointless operation, and we leak the iovec if it's
a large (non-stack) vec.

Fixes: b63534c4 ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
conflict:
        fs/io_uring.c
Signed-off-by: NLaibin Qiu <qiulaibin@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>