- 31 10月, 2017 2 次提交
-
-
由 Maarten Lankhorst 提交于
The original intent was to preserve watermarks as much as possible in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm. It seems this approach is insufficient and we don't always preserve the raw watermarks, so just use the atomic iterator we're already using to get a const pointer to all bound planes on the crtc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org #v4.8+ Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 28283f4f) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Manasi Navare 提交于
During modeset cleanup on driver unload we may have a pending hotplug work. This needs to be canceled early during the teardown so that it does not fire after we have freed the connector. We do this after drm_kms_helper_poll_fini(dev) since this might trigger modeset retry work due to link retrain and before intel_fbdev_fini() since this work requires the lock from fbdev. If this is not done we may see something like: DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) ------------[ cut here ]------------ WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60 Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 task: ffff8803c827aa40 task.stack: ffffc90000520000 RIP: 0010:mutex_destroy+0x4e/0x60 RSP: 0018:ffffc90000523d58 EFLAGS: 00010292 RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000 RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0 RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8 R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308 FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_fb_helper_fini+0xd9/0x130 intel_fbdev_destroy+0x12/0x60 [i915] intel_fbdev_fini+0x28/0x30 [i915] intel_modeset_cleanup+0x45/0xa0 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x39/0xb0 device_release_driver_internal+0x15d/0x220 driver_detach+0x40/0x80 bus_remove_driver+0x58/0xd0 driver_unregister+0x2c/0x40 pci_unregister_driver+0x36/0xb0 i915_exit+0x1a/0x8b [i915] SyS_delete_module+0x18c/0x1e0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f5df3286287 RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287 RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48 RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080 R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000 Or a GPF like: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 Workqueue: events intel_dp_modeset_retry_work_fn [i915] task: ffff88045a5caa40 task.stack: ffffc90000378000 RIP: 0010:drm_setup_crtcs+0x143/0xbf0 RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438 FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0 Call Trace: drm_fb_helper_hotplug_event.part.18+0x7e/0xc0 drm_fb_helper_hotplug_event+0x1a/0x20 intel_fbdev_output_poll_changed+0x1a/0x20 [i915] drm_kms_helper_hotplug_event+0x27/0x30 intel_dp_modeset_retry_work_fn+0x77/0x80 [i915] process_one_work+0x233/0x660 worker_thread+0x206/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44 +89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01 RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20 ---[ end trace 08901ff1a77d30c7 ]--- v2: * Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it as the first step before cancel work (Chris Wilson) * Add GPF trace in commit message and make the function static (Maarten Lankhorst) Suggested-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Fixes: 9301397a ("drm/i915: Implement Link Rate fallback on Link training failure") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tony Cheng <tony.cheng@amd.com> Cc: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 886c6b86) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 27 10月, 2017 4 次提交
-
-
由 Xiong Zhang 提交于
When a workload is too heavy to finish it in gpu hang check timer intervals(1.5), gpu hang check function will check ACTHD register value to decide whether gpu is real dead or not. On real hw, ACTHD is updated by HW when workload is running, then host kernel won't think it is gpu hang. while guest kernel always read a constant ACTHD value as GVT doesn't supply ACTHD emulate handler, then guest kernel detects a fake gpu hang. To remove such guest fake gpu hang, this patch supply ACTHD mmio read handler which read real HW ACTHD register directly. Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: NZhi Wang <zhi.a.wang@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4c9a097-3e62-124e-6856-b0c37764df7b@intel.com
-
由 Xiong Zhang 提交于
The mmio read handler for ring timestmap / instdone register are same as reading hw value directly. Extract it as common function to reduce code duplications. Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
-
由 Zhi Wang 提交于
Inspect if the host has VCS2 ring by host i915 macro in MMIO_RING_F(). Also this helps on reducing some LOCs. Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
-
由 Zhenyu Wang 提交于
Need to check valid state for per_ctx bb and bypass batch buffer combine for scan if necessary. Otherwise adding invalid MI batch buffer start cmd for per_ctx bb will cause scan failure, which is taken as -EFAULT now so vGPU would be put in failsafe. This trys to fix that by checking per_ctx bb valid state. Also remove old invalid WARNING that indirect ctx bb shouldn't depend on valid per_ctx bb. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
-
- 25 10月, 2017 1 次提交
-
-
由 Lionel Landwerlin 提交于
The compat callback was missing and triggered failures in 32bits userspace when enabling/disable the perf stream. We don't require any particular processing here as these ioctls don't take any argument. Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: eec688e1 ("drm/i915: Add i915 perf infrastructure") Cc: linux-stable <stable@vger.kernel.org> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com (cherry picked from commit 191f8960) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 18 10月, 2017 2 次提交
-
-
由 Oscar Mateo 提交于
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important (although we probably aren't at the moment because 0 seems to be the default for all the other bits). v2: Extra parentheses (Michel) Fixes: 050fc465 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf") Fixes: 450174fe ("drm/i915/chv: Tune L3 SQC credits based on actual latencies") Signed-off-by: NOscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: NMichel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 930a784d) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Chris Wilson 提交于
When pwriting into shmemfs, the fast path pagecache_write does not notice when it is writing to beyond the end of the truncated shmemfs inode. Report -EFAULT directly when we try to use pwrite into the !I915_MADV_WILLNEED object. Fixes: 7c55e2c5 ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl") Testcase: igt/gem_madvise/dontneed-before-pwrite Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk (cherry picked from commit a6d65e45) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 17 10月, 2017 5 次提交
-
-
由 Rodrigo Vivi 提交于
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not on in a global CTRL1 as it was on SKL. The original patch addressed this difference, but leaving behind this single entry here. So we were checking the wrong bits during the PLL initialization and consequently avoiding the CFGCR1 setup during HDMI initialization. Luckly when only HDMI was in use BIOS had already setup this for us. But the dual display with hot plug were messed up. Fixes: a927c927 ("drm/i915/cnl: Initialize PLLs") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NJames Ausmus <james.ausmus@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com (cherry picked from commit 614ee07a) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Rodrigo Vivi 提交于
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on the clock for the DDI and map the DPLL to the DDI" So we first do the map and then we unset DDI_CLK_OFF to turn the clock on. We do this in 2 separated steps. However, on this second step where we should only unset the off bit we are also unmapping the ddi from the pll. So we end up using the pll 0 for almost everything. Consequently breaking cases with more than one display. Fixes: 555e38d2 ("drm/i915/cnl: DDI - PLL mapping") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NJames Ausmus <james.ausmus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com (cherry picked from commit 87145d95) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Chris Wilson 提交于
The compiler warns: drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses hsw_ddi_translations_fdi[] for both Haswell and *Broadwell* Fixes: 7d1c42e6 ("drm/i915: Refactor code to select the DDI buf translation table") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.ukReviewed-by: NJani Nikula <jani.nikula@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 1210d388) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Chris Wilson 提交于
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk (cherry picked from commit 55b4f1ce) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Changbin Du 提交于
We have implemented delayed ring mmio switch mechanism to reduce unnecessary mmio switch. While the vGPU is being destroyed or detached from VM, we need to force the ring switch to host context. The later deadline is missed. Then it got a chance that word load from VM2 might execute under the ring context of VM1 which was attached to a same vGPU instance. Finally, the GPU is hang. This patch guarantee the two deadline are performed. v2: Remove unused variable 'scheduler' Signed-off-by: NChangbin Du <changbin.du@intel.com> Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
-
- 12 10月, 2017 1 次提交
-
-
由 Jani Nikula 提交于
While technically CHV isn't DDI, we do look at the VBT based DDI port info for HDMI DDC pin and DP AUX channel. (We call these "alternate", but they're really just something that aren't platform defaults.) In commit e4ab73a1 ("drm/i915: Respect alternate_ddc_pin for all DDI ports") Ville writes, "IIRC there may be CHV system that might actually need this." I'm not sure why there couldn't be even more platforms that need this, but start conservative, and parse the info for CHV in addition to DDI. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553Reported-by: NMarek Wilczewski <mw@3cte.pl> Cc: stable@vger.kernel.org Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com (cherry picked from commit 348e4058) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 10 10月, 2017 6 次提交
-
-
由 Ville Syrjälä 提交于
intel_crtc->config->cpu_transcoder isn't yet filled out when intel_crtc_mode_get() gets called during output probing, so we should not use it there. Instead intel_crtc_mode_get() figures out the correct transcoder on its own, and that's what we should use. If the BIOS boots LVDS on pipe B, intel_crtc_mode_get() would actually end up reading the timings from pipe A instead (since PIPE_A==0), which clearly isn't what we want. It looks to me like this may have been broken by commit eccb140b ("drm/i915: hw state readout&check support for cpu_transcoder") as that one removed the early initialization of cpu_transcoder from intel_crtc_init(). Cc: stable@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Rob Kramer <rob@solution-space.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: NRob Kramer <rob@solution-space.com> Fixes: eccb140b ("drm/i915: hw state readout&check support for cpu_transcoder") References: https://lists.freedesktop.org/archives/dri-devel/2016-April/104142.htmlSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1459525046-19425-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit e30a154b) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Chris Wilson 提交于
If two nop's (requests in-flight following a wedged device) complete at the same time, the global_seqno value written to the HWSP is undefined as the two threads are not serialized. v2: Use irqsafe spinlock. We expect the callback may be called from inside another irq spinlock, so we can't unconditionally restore irqs. Fixes: ce1135c7 ("drm/i915: Complete requests in nop_submit_request") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171006115617.18432-1-chris@chris-wilson.co.uk (cherry picked from commit 8d550824) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Chris Wilson 提交于
Not all compilers are able to determine that pg is guarded by wait_fuses and so may think that pg is used uninitialized. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Fixes: b2891eb2 ("drm/i915/hsw+: Add has_fuses power well attribute") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171002100416.25865-1-chris@chris-wilson.co.ukReviewed-by: NImre Deak <imre.deak@intel.com> (cherry picked from commit 320671f9) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Maarten Lankhorst 提交于
crtc_state_is_legacy_gamma also checks for CTM, which was missing from intel_color_check. By using the same condition for commit and check we reduce the chance of mismatches. This was spotted by KASAN while trying to rework kms_color igt test. [ 72.008660] ================================================================== [ 72.009326] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.009519] Read of size 2 at addr ffff880220216e50 by task kms_color/1158 [ 72.009900] CPU: 2 PID: 1158 Comm: kms_color Tainted: G U W 4.14.0-rc3-patser+ #5281 [ 72.009921] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016 [ 72.009941] Call Trace: [ 72.009968] dump_stack+0xc5/0x151 [ 72.009996] ? _atomic_dec_and_lock+0x10f/0x10f [ 72.010024] ? show_regs_print_info+0x3c/0x3c [ 72.010072] print_address_description+0x7f/0x240 [ 72.010108] kasan_report+0x216/0x370 [ 72.010308] ? bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.010349] __asan_load2+0x74/0x80 [ 72.010552] bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.010772] broadwell_load_luts+0x1f0/0x300 [i915] [ 72.010997] intel_color_load_luts+0x36/0x40 [i915] [ 72.011205] intel_begin_crtc_commit+0xa1/0x310 [i915] [ 72.011283] drm_atomic_helper_commit_planes_on_crtc+0xa6/0x320 [drm_kms_helper] [ 72.011316] ? wait_for_completion_io+0x460/0x460 [ 72.011524] intel_update_crtc+0xe3/0x100 [i915] [ 72.011720] skl_update_crtcs+0x360/0x3f0 [i915] [ 72.011945] ? intel_update_crtcs+0xf0/0xf0 [i915] [ 72.012010] ? drm_atomic_helper_wait_for_dependencies+0x3d9/0x400 [drm_kms_helper] [ 72.012231] intel_atomic_commit_tail+0x8db/0x1500 [i915] [ 72.012273] ? __lock_is_held+0x9c/0xc0 [ 72.012494] ? skl_update_crtcs+0x3f0/0x3f0 [i915] [ 72.012518] ? find_next_bit+0xb/0x10 [ 72.012544] ? cpumask_next+0x1a/0x20 [ 72.012745] ? i915_sw_fence_complete+0x9d/0xe0 [i915] [ 72.012938] ? __i915_sw_fence_complete+0x5d0/0x5d0 [i915] [ 72.013176] intel_atomic_commit+0x528/0x570 [i915] [ 72.013280] ? drm_atomic_get_property+0xc00/0xc00 [drm] [ 72.013466] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.013496] ? kmem_cache_alloc_trace+0x266/0x280 [ 72.013714] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.013812] drm_atomic_commit+0x77/0x80 [drm] [ 72.013911] set_property_atomic+0x14a/0x210 [drm] [ 72.014015] ? drm_object_property_get_value+0x70/0x70 [drm] [ 72.014080] ? mutex_unlock+0xd/0x10 [ 72.014292] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.014379] drm_mode_obj_set_property_ioctl+0x1cf/0x310 [drm] [ 72.014481] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.014510] ? lock_release+0x6c0/0x6c0 [ 72.014602] ? drm_is_current_master+0x46/0x60 [drm] [ 72.014706] drm_ioctl_kernel+0x148/0x1d0 [drm] [ 72.014799] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.014898] ? drm_ioctl_permit+0x100/0x100 [drm] [ 72.014936] ? kasan_check_write+0x14/0x20 [ 72.015039] drm_ioctl+0x441/0x660 [drm] [ 72.015129] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.015235] ? drm_getstats+0x20/0x20 [drm] [ 72.015287] ? ___might_sleep+0x159/0x340 [ 72.015311] ? find_held_lock+0xcf/0xf0 [ 72.015341] ? __schedule_bug+0x110/0x110 [ 72.015405] do_vfs_ioctl+0xa88/0xb10 [ 72.015449] ? ioctl_preallocate+0x1a0/0x1a0 [ 72.015487] ? selinux_capable+0x20/0x20 [ 72.015525] ? rcu_dynticks_momentary_idle+0x40/0x40 [ 72.015607] SyS_ioctl+0x4e/0x80 [ 72.015647] entry_SYSCALL_64_fastpath+0x18/0xad [ 72.015670] RIP: 0033:0x7ff74a3d04d7 [ 72.015691] RSP: 002b:00007ffc594bec08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 72.015734] RAX: ffffffffffffffda RBX: ffffffff8718f54a RCX: 00007ff74a3d04d7 [ 72.015756] RDX: 00007ffc594bec40 RSI: 00000000c01864ba RDI: 0000000000000003 [ 72.015777] RBP: ffff880211c0ff98 R08: 0000000000000086 R09: 0000000000000000 [ 72.015799] R10: 00007ff74a691b58 R11: 0000000000000246 R12: 0000000000000355 [ 72.015821] R13: 00000000ff00eb00 R14: 0000000000000a00 R15: 00007ff746082000 [ 72.015857] ? trace_hardirqs_off_caller+0xfa/0x110 Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005141520.23990-1-maarten.lankhorst@linux.intel.com [mlankhorst: s/crtc_state_is_legacy/&_gamma/ (danvet)] Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Fixes: 82cf435b ("drm/i915: Implement color management on bdw/skl/bxt/kbl") Cc: <stable@vger.kernel.org> # v4.7+ (cherry picked from commit 0c3767b2) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Manasi Navare 提交于
For this specific PCI device, the eDP panel requires a higher panel power cycle delay of 1300ms where the minimum spec requirement of panel power cycle delay is 500ms. This fix in combination with correct timestamp at which we get the panel power off time fixes the dP AUX CH timeouts seen on various IGT tests. Fixes: c99a259b ("drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com (cherry picked from commit c02b8fb4) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Manasi Navare 提交于
Kernel stores the time in jiffies at which the eDP panel is turned off. This should be obtained after the panel is off (after the wait_panel_off). When we next attempt to turn the panel on, we use the difference between the timestamp at which we want to turn the panel on and timestamp at which panel was turned off to ensure that this is equal to panel power cycle delay and if not we wait for the remaining time. Not waiting for the panel power cycle delay can cause the panel to not turn on giving rise to AUX timeouts for the attempted AUX transactions. v2: * Separate lines for bugzilla (Jani Nikula) * Suggested by tag (Daniel Vetter) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NJani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com (cherry picked from commit cbacf02e) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 05 10月, 2017 2 次提交
-
-
由 Imre Deak 提交于
According to BSpec GLK like BXT needs to ignore the idle state of cores before starting the DMC firmware's DC state handler. Fixes: dbb28b5c ("drm/i915/DMC/GLK: Load DMC on GLK") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com (cherry picked from commit b7208a3f) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Imre Deak 提交于
The DMC firmware program memory is lost after S3/S4 system suspend, so we need to reprogram it during resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070 Fixes: cebfcead ("drm/i915/DMC/CNL: Load DMC on CNL") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com (cherry picked from commit 57522c4c) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 04 10月, 2017 1 次提交
-
-
由 Imre Deak 提交于
The common lane power down flag of a DPIO PHY has a funky semantic: after the initial enabling of the PHY (so from a disabled state) this flag will be clear. It will be set only after the PHY will be used for the first time (for instance due to enabling the corresponding pipe) and then become unused (due to disabling the pipe). During the initial PHY enablement we don't know which of the above phases we are in, so move the check for the flag where this is known, the HW readout code. This is where the rest of lane power down status checks are done anyway. This fixes at least a problem on GLK where after module reloading, the common lane power down flag of PHY1 is set, but the PHY is actually powered-on and properly set up. The GRC readout code for other PHYs will hence think that PHY1 is not powered initially and disable it after the GRC readout. This will cause the AUX power well related to PHY1 to get disabled in a stuck state, timing out when we try to enable it later. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Fixes: e93da0a0 ("drm/i915/bxt: Sanitiy check the PHY lane power down status") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com (cherry picked from commit e19c1eb8) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 27 9月, 2017 3 次提交
-
-
由 Jani Nikula 提交于
The hardware state readout oopses after several warnings when trying to use HDMI on port A, if such a combination is configured in VBT. Filter the combo out already at the VBT parsing phase. v2: also ignore DVI (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889 Cc: stable@vger.kernel.org Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Tested-by: NDaniel Drake <dan@reactivated.net> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170921141920.18172-1-jani.nikula@intel.com (cherry picked from commit d27ffc1d) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Colin Ian King 提交于
hw_check is being assigned and updated but is no longer being read, hence it is redundant and can be removed. Detected by clang scan-build: "warning: Value stored to 'hw_check' during its initialization is never read" Fixes: f6d1973d ("drm/i915: Move modeset state verifier calls") Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914162154.11304-1-colin.king@canonical.com (cherry picked from commit 4babc5e2) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Jani Nikula 提交于
drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP. Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable(). Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joseph Nuzman <jnuzman@gmail.com> Reported-by: NJoseph Nuzman <jnuzman@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Tested-by: NJoseph Nuzman <jnuzman@gmail.com> Cc: stable@vger.kernel.org # v4.10+, maybe earlier Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919153813.29808-1-jani.nikula@intel.com (cherry picked from commit d81fb7fd) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 19 9月, 2017 6 次提交
-
-
由 Chris Wilson 提交于
Commit 1bf6ad62 ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos") removed the use of in_vbl, but did not remove the local variable. Do so now. Fixes: 1bf6ad62 ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170914164213.18461-1-chris@chris-wilson.co.ukReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit e01e71fc) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Lee, Shawn C 提交于
Min brightness value from vbt was missing for CNP platform. This setting have to refer backlight ic spec to restrict min backlight output. Without this restriction, driver would allow to configure lower brightness value and violate backlight ic requirement. Fixes: 4c9f7086 ("drm/i915/cnp: Backlight support for CNP.") Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: NShawn Lee <shawn.c.lee@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505279961-16140-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit f44e354f) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Uma Shankar 提交于
This reverts commit bbdf0b2f ("drm/i915/bxt: Disable device ready before shutdown command"). Disable device ready before shutdown command was added previously to avoid a split screen issue seen on dual link DSI panels. As of now, dual link is not supported and will need some rework in the upstream code. For single link DSI panels, the change is not required. This will cause failure in sending SHUTDOWN packet during disable. Hence reverting the change. Will handle the change as part of dual link enabling in upstream. Fixes: bbdf0b2f ("drm/i915/bxt: Disable device ready before shutdown command") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: NUma Shankar <uma.shankar@intel.com> Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com (cherry picked from commit 33c8d887) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Lee, Shawn C 提交于
Min brightness value from vbt was missing for BXT platform. This setting have to refer backlight ic spec to restrict min backlight output. Without this restriction, driver would allow to configure lower brightness value and violate backlight ic requirement. Fixes: 0fb890c0 ("drm/i915/bxt: BLC implementation") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Gary C Wang <gary.c.wang@intel.com> Signed-off-by: NShawn Lee <shawn.c.lee@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit c3881128) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Christophe JAILLET 提交于
We should go through the error handling path to decrease the 'framebuffer_references' as done everywhere else in this function. Fixes: 2e2adb05 ("drm/i915: Add render decompression support") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr (cherry picked from commit 37875d6b) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Changbin Du 提交于
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5. 00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller]) .... Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G] Region 4: Memory at <ignored> (32-bit, non-prefetchable) Region 5: Memory at <ignored> (32-bit, non-prefetchable) Expansion ROM at febd6000 [disabled] [size=2K] The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and Region 5 are shown because we report their size as 0xffffffff. They should report size 0 instead. BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so we ignored this BAR for vGPU device. v2: fix BAR size value calculation. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032Signed-off-by: NChangbin Du <changbin.du@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit f1751362) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 14 9月, 2017 1 次提交
-
-
由 Michal Hocko 提交于
GFP_TEMPORARY was introduced by commit e12ba74d ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NMel Gorman <mgorman@suse.de> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 9月, 2017 1 次提交
-
-
由 Davidlohr Bueso 提交于
Allow interval trees to quickly check for overlaps to avoid unnecesary tree lookups in interval_tree_iter_first(). As of this patch, all interval tree flavors will require using a 'rb_root_cached' such that we can have the leftmost node easily available. While most users will make use of this feature, those with special functions (in addition to the generic insert, delete, search calls) will avoid using the cached option as they can do funky things with insertions -- for example, vma_interval_tree_insert_after(). [jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()] Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Acked-by: NChristian König <christian.koenig@amd.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NDoug Ledford <dledford@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Jason Wang <jasowang@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 9月, 2017 3 次提交
-
-
由 Chris Wilson 提交于
shrink_slab() allows us to report back the number of objects we successfully scanned (out of the target shrinkctl->nr_to_scan). As report the number of pages owned by each GEM object as a separate item to the shrinker, we cannot precisely control the number of shrinker objects we scan on each pass; and indeed may free more than requested. If we fail to tell the shrinker about the number of objects we process, it will continue to hold a grudge against us as any objects left unscanned are added to the next reclaim -- and so we will keep on "unfairly" shrinking our own slab in comparison to other slabs. Link: http://lkml.kernel.org/r/20170822135325.9191-2-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wilson 提交于
Ville Syrjälä spotted that PGETBL_CTL was losing its enable bit upon a reset. That was causing the display to show garbage on his 945gm. On my i915gm the effect was far more severe; re-enabling the display following the reset without PGETBL_CTL being enabled lead to an immediate hard hang. We do have a routine to re-enable PGETBL_CTL which is applicable to gen2-4, although on gen4 it is documented that a graphics reset doesn't alter the register (no such wording is given for gen3) and should be safe to call to punch back in the enable bit. However, that leaves the question of whether we need to completely re-initialise the register and the rest of the GSM. For g33/pnv/gen4+, where we do have a configurable page table, its contents do seem to be kept, and so we should be able to recover without having to reinitialise the GTT from scratch (as prior to g33, that register is configured by the BIOS and we leave alone except for the enable bit). This appears to have been broken by commit 5fbd0418 ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms"), which moved the intel_enable_gtt() from i915_gem_init_hw() (also used by reset) to add it earlier during hw init and resume, missing the reset path. v2: Find the culprit, rearrange ggtt_enable to be before gem_init_hw to match init/resume Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Fixes: 5fbd0418 ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101852Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: NDaniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170906111405.27110-1-chris@chris-wilson.co.ukTested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 0db8c961) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Ville Syrjälä 提交于
Add the missing __user to the urelocs cast to fix the following sparse warning: i915_gem_execbuffer.c:1541:47: warning: cast removes address space of expression i915_gem_execbuffer.c:1541:62: warning: incorrect type in argument 2 (different address spaces) i915_gem_execbuffer.c:1541:62: expected void const [noderef] <asn:1>*from i915_gem_execbuffer.c:1541:62: got char * Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901165434.24636-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit 908a6105) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 06 9月, 2017 2 次提交
-
-
由 Chris Wilson 提交于
Sparse enforces that GFP flags are only manipulated inside gfp_t locals. Fixes: 4d470f73 ("drm/i915: Avoid undefined behaviour of "u32 >> 32"") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901145729.21363-1-chris@chris-wilson.co.ukReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 0d95c883) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Ville Syrjälä 提交于
radix_tree_for_each_slot() wants an __rcu annotated pointer for the slot. So let's add the annotation. Fixes the following sparse warnings: i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces) i915_gem.c:2217:9: expected void **slot i915_gem.c:2217:9: got void [noderef] <asn:4>** i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces) i915_gem.c:2217:9: expected void **slot i915_gem.c:2217:9: got void [noderef] <asn:4>** i915_gem.c:2217:9: warning: incorrect type in argument 1 (different address spaces) i915_gem.c:2217:9: expected void [noderef] <asn:4>**slot i915_gem.c:2217:9: got void **slot i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces) i915_gem.c:2217:9: expected void **slot i915_gem.c:2217:9: got void [noderef] <asn:4>** Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 96d77634 ("drm/i915: Use a radixtree for random access to the object's backing storage") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901171252.31025-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit c23aa71b) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-