Patch series "Charge loop device i/o to issuing cgroup", v14.

The loop device runs all i/o to the backing file on a separate kworker
thread which results in all i/o being charged to the root cgroup.  This
allows a loop device to be used to trivially bypass resource limits and
other policy.  This patch series fixes this gap in accounting.

A simple script to demonstrate this behavior on cgroupv2 machine:

'''
#!/bin/bash
set -e

CGROUP=/sys/fs/cgroup/test.slice
LOOP_DEV=/dev/loop0

if [[ ! -d $CGROUP ]]
then
    sudo mkdir $CGROUP
fi

grep oom_kill $CGROUP/memory.events

# Set a memory limit, write more than that limit to tmpfs -> OOM kill
sudo unshare -m bash -c "
echo \$\$ > $CGROUP/cgroup.procs;
echo 0 > $CGROUP/memory.swap.max;
echo 64M > $CGROUP/memory.max;
mount -t tmpfs -o size=512m tmpfs /tmp;
dd if=/dev/zero of=/tmp/file bs=1M count=256" || true

grep oom_kill $CGROUP/memory.events

# Set a memory limit, write more than that limit through loopback
# device -> no OOM kill
sudo unshare -m bash -c "
echo \$\$ > $CGROUP/cgroup.procs;
echo 0 > $CGROUP/memory.swap.max;
echo 64M > $CGROUP/memory.max;
mount -t tmpfs -o size=512m tmpfs /tmp;
truncate -s 512m /tmp/backing_file
losetup $LOOP_DEV /tmp/backing_file
dd if=/dev/zero of=$LOOP_DEV bs=1M count=256;
losetup -D $LOOP_DEV" || true

grep oom_kill $CGROUP/memory.events
'''

Naively charging cgroups could result in priority inversions through the
single kworker thread in the case where multiple cgroups are
reading/writing to the same loop device.  This patch series does some
minor modification to the loop driver so that each cgroup can make forward
progress independently to avoid this inversion.

With this patch series applied, the above script triggers OOM kills when
writing through the loop device as expected.

This patch (of 3):

Existing uses of loop device may have multiple cgroups reading/writing to
the same device.  Simply charging resources for I/O to the backing file
could result in priority inversion where one cgroup gets synchronously
blocked, holding up all other I/O to the loop device.

In order to avoid this priority inversion, we use a single workqueue where
each work item is a "struct loop_worker" which contains a queue of struct
loop_cmds to issue.  The loop device maintains a tree mapping blk css_id
-> loop_worker.  This allows each cgroup to independently make forward
progress issuing I/O to the backing file.

There is also a single queue for I/O associated with the rootcg which can
be used in cases of extreme memory shortage where we cannot allocate a
loop_worker.

The locking for the tree and queues is fairly heavy handed - we acquire a
per-loop-device spinlock any time either is accessed.  The existing
implementation serializes all I/O through a single thread anyways, so I
don't believe this is any worse.

[colin.king@canonical.com: fixes]

Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com
Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.comSigned-off-by: NDan Schatzberg <schatzberg.dan@gmail.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change deprecated zero-length-and-one-element-arrays into flexible array
member.Zero-length and one-element arrays detected by Lukas's CodeChecker.
Zero/one element arrays cause undefined behaviours if sizeof() used.

Link: https://lkml.kernel.org/r/20210518200910.29912-1-wenhui@gwmail.gwu.eduSigned-off-by: Nwenhuizhang <wenhui@gwmail.gwu.edu>
Reviewed-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The noinline_for_stack is introduced by commit 66635629 ("vmscan: set
up pagevec as late as possible in shrink_inactive_list()"), its purpose is
to delay the allocation of pagevec as late as possible to save stack
memory.  But the commit 2bcf8879 ("mm: take pagevecs off reclaim
stack") replace pagevecs by lists of pages_to_free.  So we do not need
noinline_for_stack, just remove it (let the compiler decide whether to
inline).

Link: https://lkml.kernel.org/r/20210417043538.9793-9-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The css_set_lock is used to guard the list of inherited objcgs.  So there
is no need to uncharge kernel memory under css_set_lock.  Just move it out
of the lock.

Link: https://lkml.kernel.org/r/20210417043538.9793-8-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The obj_cgroup_release() and memcg_reparent_objcgs() are serialized by the
css_set_lock.  We do not need to care about objcg->memcg being released in
the process of obj_cgroup_release().  So there is no need to pin memcg
before releasing objcg.  Remove those pinning logic to simplfy the code.

There are only two places that modifies the objcg->memcg.  One is the
initialization to objcg->memcg in the memcg_online_kmem(), another is
objcgs reparenting in the memcg_reparent_objcgs().  It is also impossible
for the two to run in parallel.  So xchg() is unnecessary and it is enough
to use WRITE_ONCE().

Link: https://lkml.kernel.org/r/20210417043538.9793-7-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lruvec_holds_page_lru_lock() doesn't check anything about locking and is
used to check whether the page belongs to the lruvec.  So rename it to
page_matches_lruvec().

Link: https://lkml.kernel.org/r/20210417043538.9793-6-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We already have a helper lruvec_memcg() to get the memcg from lruvec, we
do not need to do it ourselves in the lruvec_holds_page_lru_lock().  So
use lruvec_memcg() instead.  And if mem_cgroup_disabled() returns false,
the page_memcg(page) (the LRU pages) cannot be NULL.  So remove the odd
logic of "memcg = page_memcg(page) ?  : root_mem_cgroup".  And use
lruvec_pgdat to simplify the code.  We can have a single definition for
this function that works for !CONFIG_MEMCG, CONFIG_MEMCG +
mem_cgroup_disabled() and CONFIG_MEMCG.

Link: https://lkml.kernel.org/r/20210417043538.9793-5-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All the callers of mem_cgroup_page_lruvec() just pass page_pgdat(page) as
the 2nd parameter to it (except isolate_migratepages_block()).  But for
isolate_migratepages_block(), the page_pgdat(page) is also equal to the
local variable of @pgdat.  So mem_cgroup_page_lruvec() do not need the
pgdat parameter.  Just remove it to simplify the code.

Link: https://lkml.kernel.org/r/20210417043538.9793-4-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When mm is NULL, we do not need to hold rcu lock and call css_tryget for
the root memcg.  And we also do not need to check !mm in every loop of
while.  So bail out early when !mm.

Link: https://lkml.kernel.org/r/20210417043538.9793-3-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "memcontrol code cleanup and simplification", v3.

This patch (of 8):

The pages aren't accounted at the root level, so do not charge the page to
the root memcg in page replacement.  Although we do not display the value
(mem_cgroup_usage) so there shouldn't be any actual problem, but there is
a WARN_ON_ONCE in the page_counter_cancel().  Who knows if it will
trigger?  So it is better to fix it.

Link: https://lkml.kernel.org/r/20210417043538.9793-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210417043538.9793-2-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The below scenario can cause the page counters of the root_mem_cgroup to
be out of balance.

CPU0:                                   CPU1:

objcg = get_obj_cgroup_from_current()
obj_cgroup_charge_pages(objcg)
                                        memcg_reparent_objcgs()
                                            // reparent to root_mem_cgroup
                                            WRITE_ONCE(iter->memcg, parent)
    // memcg == root_mem_cgroup
    memcg = get_mem_cgroup_from_objcg(objcg)
    // do not charge to the root_mem_cgroup
    try_charge(memcg)

obj_cgroup_uncharge_pages(objcg)
    memcg = get_mem_cgroup_from_objcg(objcg)
    // uncharge from the root_mem_cgroup
    refill_stock(memcg)
        drain_stock(memcg)
            page_counter_uncharge(&memcg->memory)

get_obj_cgroup_from_current() never returns a root_mem_cgroup's objcg, so
we never explicitly charge the root_mem_cgroup.  And it's not going to
change.  It's all about a race when we got an obj_cgroup pointing at some
non-root memcg, but before we were able to charge it, the cgroup was gone,
objcg was reparented to the root and so we're skipping the charging.  Then
we store the objcg pointer and later use to uncharge the root_mem_cgroup.

This can cause the page counter to be less than the actual value.
Although we do not display the value (mem_cgroup_usage) so there shouldn't
be any actual problem, but there is a WARN_ON_ONCE in the
page_counter_cancel().  Who knows if it will trigger?  So it is better to
fix it.

Link: https://lkml.kernel.org/r/20210425075410.19255-1-songmuchun@bytedance.comSigned-off-by: NMuchun Song <songmuchun@bytedance.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The KMALLOC_NORMAL (kmalloc-<n>) caches are for unaccounted objects only
when CONFIG_MEMCG_KMEM is enabled.  To make sure that this condition
remains true, we will have to prevent KMALOC_NORMAL caches to merge with
other kmem caches.  This is now done by setting its refcount to -1 right
after its creation.

Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Suggested-by: NRoman Gushchin <guro@fb.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are currently two problems in the way the objcg pointer array
(memcg_data) in the page structure is being allocated and freed.

On its allocation, it is possible that the allocated objcg pointer
array comes from the same slab that requires memory accounting. If this
happens, the slab will never become empty again as there is at least
one object left (the obj_cgroup array) in the slab.

When it is freed, the objcg pointer array object may be the last one
in its slab and hence causes kfree() to be called again. With the
right workload, the slab cache may be set up in a way that allows the
recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system.

One way to solve this problem is to split the kmalloc-<n> caches
(KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n>
(KMALLOC_NORMAL) caches for unaccounted objects only and a new set of
kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All
the other caches can still allow a mix of accounted and unaccounted
objects.

With this change, all the objcg pointer array objects will come from
KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So
both the recursive kfree() problem and non-freeable slab problem are
gone.

Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer have
mixed accounted and unaccounted objects, this will slightly reduce the
number of objcg pointer arrays that need to be allocated and save a bit
of memory. On the other hand, creating a new set of kmalloc caches does
have the effect of reducing cache utilization. So it is properly a wash.

The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and
KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches()
will include the newly added caches without change.

[vbabka@suse.cz: don't create kmalloc-cg caches with cgroup.memory=nokmem]
  Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com
[akpm@linux-foundation.org: un-fat-finger v5 delta creation]
[longman@redhat.com: disable cache merging for KMALLOC_NORMAL caches]
  Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.com

Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-3-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Suggested-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
[longman@redhat.com: fix for CONFIG_ZONE_DMA=n]
Suggested-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm: memcg/slab: Fix objcg pointer array handling problem", v4.

Since the merging of the new slab memory controller in v5.9, the page
structure stores a pointer to objcg pointer array for slab pages.  When
the slab has no used objects, it can be freed in free_slab() which will
call kfree() to free the objcg pointer array in
memcg_alloc_page_obj_cgroups().  If it happens that the objcg pointer
array is the last used object in its slab, that slab may then be freed
which may caused kfree() to be called again.

With the right workload, the slab cache may be set up in a way that allows
the recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system.  In fact, we have a reproducer that
can cause kernel stack overflow on a s390 system involving kmalloc-rcl-256
and kmalloc-rcl-128 slabs with the following kfree() loop recursively
called 74 times:

  [ 285.520739] [<000000000ec432fc>] kfree+0x4bc/0x560 [ 285.520740]
[<000000000ec43466>] __free_slab+0xc6/0x228 [ 285.520741]
[<000000000ec41fc2>] __slab_free+0x3c2/0x3e0 [ 285.520742]
[<000000000ec432fc>] kfree+0x4bc/0x560 : While investigating this issue, I
also found an issue on the allocation side.  If the objcg pointer array
happen to come from the same slab or a circular dependency linkage is
formed with multiple slabs, those affected slabs can never be freed again.

This patch series addresses these two issues by introducing a new set of
kmalloc-cg-<n> caches split from kmalloc-<n> caches.  The new set will
only contain non-reclaimable and non-dma objects that are accounted in
memory cgroups whereas the old set are now for unaccounted objects only.
By making this split, all the objcg pointer arrays will come from the
kmalloc-<n> caches, but those caches will never hold any objcg pointer
array.  As a result, deeply nested kfree() call and the unfreeable slab
problems are now gone.

This patch (of 4):

Since the merging of the new slab memory controller in v5.9, the page
structure may store a pointer to obj_cgroup pointer array for slab pages.
Currently, only the __GFP_ACCOUNT bit is masked off.  However, the array
is not readily reclaimable and doesn't need to come from the DMA buffer.
So those GFP bits should be masked off as well.

Do the flag bit clearing at memcg_alloc_page_obj_cgroups() to make sure
that it is consistently applied no matter where it is called.

Link: https://lkml.kernel.org/r/20210505200610.13943-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-2-longman@redhat.com
Fixes: 286e04b8 ("mm: memcg/slab: allocate obj_cgroups for non-root slab pages")
Signed-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most kmem_cache_alloc() calls are from user context.  With instrumentation
enabled, the measured amount of kmem_cache_alloc() calls from non-task
context was about 0.01% of the total.

The irq disable/enable sequence used in this case to access content from
object stock is slow.  To optimize for user context access, there are now
two sets of object stocks (in the new obj_stock structure) for task
context and interrupt context access respectively.

The task context object stock can be accessed after disabling preemption
which is cheap in non-preempt kernel.  The interrupt context object stock
can only be accessed after disabling interrupt.  User context code can
access interrupt object stock, but not vice versa.

The downside of this change is that there are more data stored in local
object stocks and not reflected in the charge counter and the vmstat
arrays.  However, this is a small price to pay for better performance.

[longman@redhat.com: fix potential uninitialized variable warning]
  Link: https://lkml.kernel.org/r/20210526193602.8742-1-longman@redhat.com
[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20210506150007.16288-5-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two issues with the current refill_obj_stock() code.  First of
all, when nr_bytes reaches over PAGE_SIZE, it calls drain_obj_stock() to
atomically flush out remaining bytes to obj_cgroup, clear cached_objcg and
do a obj_cgroup_put().  It is likely that the same obj_cgroup will be used
again which leads to another call to drain_obj_stock() and
obj_cgroup_get() as well as atomically retrieve the available byte from
obj_cgroup.  That is costly.  Instead, we should just uncharge the excess
pages, reduce the stock bytes and be done with it.  The drain_obj_stock()
function should only be called when obj_cgroup changes.

Secondly, when charging an object of size not less than a page in
obj_cgroup_charge(), it is possible that the remaining bytes to be
refilled to the stock will overflow a page and cause refill_obj_stock() to
uncharge 1 page.  To avoid the additional uncharge in this case, a new
allow_uncharge flag is added to refill_obj_stock() which will be set to
false when called from obj_cgroup_charge() so that an uncharge_pages()
call won't be issued right after a charge_pages() call unless the objcg
changes.

A multithreaded kmalloc+kfree microbenchmark on a 2-socket 48-core
96-thread x86-64 system with 96 testing threads were run.  Before this
patch, the total number of kilo kmalloc+kfree operations done for a 4k
large object by all the testing threads per second were 4,304 kops/s
(cgroup v1) and 8,478 kops/s (cgroup v2).  After applying this patch, the
number were 4,731 (cgroup v1) and 418,142 (cgroup v2) respectively.  This
represents a performance improvement of 1.10X (cgroup v1) and 49.3X
(cgroup v2).

Link: https://lkml.kernel.org/r/20210506150007.16288-4-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before the new slab memory controller with per object byte charging,
charging and vmstat data update happen only when new slab pages are
allocated or freed.  Now they are done with every kmem_cache_alloc() and
kmem_cache_free().  This causes additional overhead for workloads that
generate a lot of alloc and free calls.

The memcg_stock_pcp is used to cache byte charge for a specific obj_cgroup
to reduce that overhead.  To further reducing it, this patch makes the
vmstat data cached in the memcg_stock_pcp structure as well until it
accumulates a page size worth of update or when other cached data change.
Caching the vmstat data in the per-cpu stock eliminates two writes to
non-hot cachelines for memcg specific as well as memcg-lruvecs specific
vmstat data by a write to a hot local stock cacheline.

On a 2-socket Cascade Lake server with instrumentation enabled and this
patch applied, it was found that about 20% (634400 out of 3243830) of the
time when mod_objcg_state() is called leads to an actual call to
__mod_objcg_state() after initial boot.  When doing parallel kernel build,
the figure was about 17% (24329265 out of 142512465).  So caching the
vmstat data reduces the number of calls to __mod_objcg_state() by more
than 80%.

Link: https://lkml.kernel.org/r/20210506150007.16288-3-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/memcg: Reduce kmemcache memory accounting overhead", v6.

With the recent introduction of the new slab memory controller, we
eliminate the need for having separate kmemcaches for each memory cgroup
and reduce overall kernel memory usage.  However, we also add additional
memory accounting overhead to each call of kmem_cache_alloc() and
kmem_cache_free().

For workloads that require a lot of kmemcache allocations and
de-allocations, they may experience performance regression as illustrated
in [1] and [2].

A simple kernel module that performs repeated loop of 100,000,000
kmem_cache_alloc() and kmem_cache_free() of either a small 32-byte object
or a big 4k object at module init time with a batch size of 4 (4 kmalloc's
followed by 4 kfree's) is used for benchmarking.  The benchmarking tool
was run on a kernel based on linux-next-20210419.  The test was run on a
CascadeLake server with turbo-boosting disable to reduce run-to-run
variation.

The small object test exercises mainly the object stock charging and
vmstat update code paths.  The large object test also exercises the
refill_obj_stock() and __memcg_kmem_charge()/__memcg_kmem_uncharge() code
paths.

With memory accounting disabled, the run time was 3.130s with both small
object big object tests.

With memory accounting enabled, both cgroup v1 and v2 showed similar
results in the small object test.  The performance results of the large
object test, however, differed between cgroup v1 and v2.

The execution times with the application of various patches in the
patchset were:

  Applied patches   Run time   Accounting overhead   %age 1   %age 2
  ---------------   --------   -------------------   ------   ------

  Small 32-byte object:
       None          11.634s         8.504s          100.0%   271.7%
        1-2           9.425s         6.295s           74.0%   201.1%
        1-3           9.708s         6.578s           77.4%   210.2%
        1-4           8.062s         4.932s           58.0%   157.6%

  Large 4k object (v2):
       None          22.107s        18.977s          100.0%   606.3%
        1-2          20.960s        17.830s           94.0%   569.6%
        1-3          14.238s        11.108s           58.5%   354.9%
        1-4          11.329s         8.199s           43.2%   261.9%

  Large 4k object (v1):
       None          36.807s        33.677s          100.0%  1075.9%
        1-2          36.648s        33.518s           99.5%  1070.9%
        1-3          22.345s        19.215s           57.1%   613.9%
        1-4          18.662s        15.532s           46.1%   496.2%

  N.B. %age 1 = overhead/unpatched overhead
       %age 2 = overhead/accounting disabled time

Patch 2 (vmstat data stock caching) helps in both the small object test
and the large v2 object test. It doesn't help much in v1 big object test.

Patch 3 (refill_obj_stock improvement) does help the small object test
but offer significant performance improvement for the large object test
(both v1 and v2).

Patch 4 (eliminating irq disable/enable) helps in all test cases.

To test for the extreme case, a multi-threaded kmalloc/kfree
microbenchmark was run on the 2-socket 48-core 96-thread system with
96 testing threads in the same memcg doing kmalloc+kfree of a 4k object
with accounting enabled for 10s. The total number of kmalloc+kfree done
in kilo operations per second (kops/s) were as follows:

  Applied patches   v1 kops/s   v1 change   v2 kops/s   v2 change
  ---------------   ---------   ---------   ---------   ---------
       None           3,520        1.00X      6,242        1.00X
        1-2           4,304        1.22X      8,478        1.36X
        1-3           4,731        1.34X    418,142       66.99X
        1-4           4,587        1.30X    438,838       70.30X

With memory accounting disabled, the kmalloc/kfree rate was 1,481,291
kop/s. This test shows how significant the memory accouting overhead
can be in some extreme situations.

For this multithreaded test, the improvement from patch 2 mainly
comes from the conditional atomic xchg of objcg->nr_charged_bytes in
mod_objcg_state(). By using an unconditional xchg, the operation rates
were similar to the unpatched kernel.

Patch 3 elminates the single highly contended cacheline of
objcg->nr_charged_bytes for cgroup v2 leading to a huge performance
improvement. Cgroup v1, however, still has another highly contended
cacheline in the shared page counter &memcg->kmem. So the improvement
is only modest.

Patch 4 helps in cgroup v2, but performs worse in cgroup v1 as
eliminating the irq_disable/irq_enable overhead seems to aggravate the
cacheline contention.

[1] https://lore.kernel.org/linux-mm/20210408193948.vfktg3azh2wrt56t@gabell/T/#u
[2] https://lore.kernel.org/lkml/20210114025151.GA22932@xsang-OptiPlex-9020/

This patch (of 4):

mod_objcg_state() is moved from mm/slab.h to mm/memcontrol.c so that
further optimization can be done to it in later patches without exposing
unnecessary details to other mm components.

Link: https://lkml.kernel.org/r/20210506150007.16288-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210506150007.16288-2-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To check whether all pages and shadow entries in swap cache has been
removed before swap cache is freed.

Link: https://lkml.kernel.org/r/20210608005121.511140-1-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With commit 09854ba9 ("mm: do_wp_page() simplification"), after COW,
the idle swap cache page (neither the page nor the corresponding swap
entry is mapped by any process) will be left in the LRU list, even if it's
in the active list or the head of the inactive list.  So, the page
reclaimer may take quite some overhead to reclaim these actually unused
pages.

To help the page reclaiming, in this patch, after COW, the idle swap cache
page will be tried to be freed.  To avoid to introduce much overhead to
the hot COW code path,

a) there's almost zero overhead for non-swap case via checking
   PageSwapCache() firstly.

b) the page lock is acquired via trylock only.

To test the patch, we used pmbench memory accessing benchmark with
working-set larger than available memory on a 2-socket Intel server with a
NVMe SSD as swap device.  Test results shows that the pmbench score
increases up to 23.8% with the decreased size of swap cache and swapin
throughput.

Link: https://lkml.kernel.org/r/20210601053143.1380078-1-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>	[use free_swap_cache()]
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before commit c10d38cc ("mm, swap: bounds check swap_info array
accesses to avoid NULL derefs"), the typical code to reference the
swap_info[] is as follows,

  type = swp_type(swp_entry);
  if (type >= nr_swapfiles)
          /* handle invalid swp_entry */;
  p = swap_info[type];
  /* access fields of *p.  OOPS! p may be NULL! */

Because the ordering isn't guaranteed, it's possible that swap_info[type]
is read before "nr_swapfiles".  And that may result in NULL pointer
dereference.

So after commit c10d38cc, the code becomes,

  struct swap_info_struct *swap_type_to_swap_info(int type)
  {
	  if (type >= READ_ONCE(nr_swapfiles))
		  return NULL;
	  smp_rmb();
	  return READ_ONCE(swap_info[type]);
  }

  /* users */
  type = swp_type(swp_entry);
  p = swap_type_to_swap_info(type);
  if (!p)
	  /* handle invalid swp_entry */;
  /* dereference p */

Where the value of swap_info[type] (that is, "p") is checked to be
non-zero before being dereferenced.  So, the NULL deferencing becomes
impossible even if "nr_swapfiles" is read after swap_info[type].
Therefore, the "smp_rmb()" becomes unnecessary.

And, we don't even need to read "nr_swapfiles" here.  Because the non-zero
checking for "p" is sufficient.  We just need to make sure we will not
access out of the boundary of the array.  With the change, nr_swapfiles
will only be accessed with swap_lock held, except in
swapcache_free_entries().  Where the absolute correctness of the value
isn't needed, as described in the comments.

We still need to guarantee swap_info[type] is read before being
dereferenced.  That can be satisfied via the data dependency ordering
enforced by READ_ONCE(swap_info[type]).  This needs to be paired with
proper write barriers.  So smp_store_release() is used in
alloc_swap_info() to guarantee the fields of *swap_info[type] is
initialized before swap_info[type] itself being written.  Note that the
fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly.
The assignment and deferencing of swap_info[type] is like
rcu_assign_pointer() and rcu_dereference().

Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

deactivate_swap_slots_cache() and reactivate_swap_slots_cache() are only
called below their implementations.  So these forward declarations are
meaningless and should be removed.

Link: https://lkml.kernel.org/r/20210520134022.1370406-4-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 55c653b71e8c ("mm: stop accounting shadow entries"),
nr_shadows is not used anymore.

Link: https://lkml.kernel.org/r/20210520134022.1370406-3-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Cleanups for swap", v2.

This series contains just cleanups to remove some unused variables, delete
meaningless forward declarations and so on.  More details can be found in
the respective changelogs.

This patch (of 4):

We should move get_swap_page_of_type() under CONFIG_HIBERNATION since the
only caller of this function is now suspend routine.

[linmiaohe@huawei.com: move scan_swap_map() under CONFIG_HIBERNATION]
  Link: https://lkml.kernel.org/r/20210521070855.2015094-1-linmiaohe@huawei.com
[linmiaohe@huawei.com: fold scan_swap_map() into the only caller get_swap_page_of_type()]
  Link: https://lkml.kernel.org/r/20210527120328.3935132-1-linmiaohe@huawei.com

Link: https://lkml.kernel.org/r/20210520134022.1370406-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210520134022.1370406-2-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                         CPU 2
-----                                         -----
shmem_swapin
  swap_cluster_readahead
    if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
                                              swapoff
                                                ..
                                                si->swap_file = NULL;
                                                ..
    struct inode *inode = si->swap_file->f_mapping->host;[oops!]

Close this race window by using get/put_swap_device() to guard against
concurrent swapoff.

Link: https://lkml.kernel.org/r/20210426123316.806267-5-linmiaohe@huawei.com
Fixes: 8fd2e0b5 ("mm: swap: check if swap backing device is congested or not")
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The non_swap_entry() was used for working with VMA based swap readahead
via commit ec560175 ("mm, swap: VMA based swap readahead").  At that
time, the non_swap_entry() checking is necessary because the function is
called before checking that in do_swap_page().  Then it's moved to
swap_ra_info() since commit eaf649eb ("mm: swap: clean up swap
readahead").  After that, the non_swap_entry() checking is unnecessary,
because swap_ra_info() is called after non_swap_entry() has been checked
already.  The resulting code is confusing as the non_swap_entry() check
looks racy now because while we released the pte lock, somebody else might
have faulted in this pte.  So we should check whether it's swap pte first
to guard against such race or swap_type will be unexpected.  But the race
isn't important because it will not cause problem.  We would have enough
checking when we really operate the PTE entries later.  So we remove the
non_swap_entry() check here to avoid confusion.

Link: https://lkml.kernel.org/r/20210426123316.806267-4-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                   	CPU 2
-----                                   	-----
do_swap_page
  if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
  swap_readpage
    if (data_race(sis->flags & SWP_FS_OPS)) {
                                        	swapoff
					  	  ..
					  	  p->swap_file = NULL;
					  	  ..
    struct file *swap_file = sis->swap_file;
    struct address_space *mapping = swap_file->f_mapping;[oops!]

Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.

Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.

Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com
Fixes: 0bcac06f ("mm,swap: skip swapcache for swapin of synchronous device")
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "close various race windows for swap", v6.

When I was investigating the swap code, I found some possible race
windows.  This series aims to fix all these races.  But using current
get/put_swap_device() to guard against concurrent swapoff for
swap_readpage() looks terrible because swap_readpage() may take really
long time.  And to reduce the performance overhead on the hot-path as much
as possible, it appears we can use the percpu_ref to close this race
window(as suggested by Huang, Ying).  The patch 1 adds percpu_ref support
for swap and most of the remaining patches try to use this to close
various race windows.  More details can be found in the respective
changelogs.

This patch (of 4):

Using current get/put_swap_device() to guard against concurrent swapoff
for some swap ops, e.g.  swap_readpage(), looks terrible because they
might take really long time.  This patch adds the percpu_ref support to
serialize against concurrent swapoff(as suggested by Huang, Ying).  Also
we remove the SWP_VALID flag because it's used together with RCU solution.

Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pagewalk ignores hugepd entries and walk down the tables as if it was
traditionnal entries, leading to crazy result.

Add walk_hugepd_range() and use it to walk hugepage tables.

Link: https://lkml.kernel.org/r/38d04410700c8d02f28ba37e020b62c55d6f3d2c.1624597695.git.christophe.leroy@csgroup.euSigned-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: NSteven Price <steven.price@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Axtens <dja@axtens.net>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

has_pinned 32bit can be packed in the MMF_HAS_PINNED bit as a noop
cleanup.

Any atomic_inc/dec to the mm cacheline shared by all threads in pin-fast
would reintroduce a loss of SMP scalability to pin-fast, so there's no
future potential usefulness to keep an atomic in the mm for this.

set_bit(MMF_HAS_PINNED) will be theoretically a bit slower than WRITE_ONCE
(atomic_set is equivalent to WRITE_ONCE), but the set_bit (just like
atomic_set after this commit) has to be still issued only once per "mm",
so the difference between the two will be lost in the noise.

will-it-scale "mmap2" shows no change in performance with enterprise
config as expected.

will-it-scale "pin_fast" retains the > 4000% SMP scalability performance
improvement against upstream as expected.

This is a noop as far as overall performance and SMP scalability are
concerned.

[peterx@redhat.com: pack has_pinned in MMF_HAS_PINNED]
  Link: https://lkml.kernel.org/r/YJqWESqyxa8OZA+2@t490s
[akpm@linux-foundation.org: coding style fixes]
[peterx@redhat.com: fix build for task_mmu.c, introduce mm_set_has_pinned_flag, fix comments]

Link: https://lkml.kernel.org/r/20210507150553.208763-4-peterx@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

has_pinned cannot be written by each pin-fast or it won't scale in SMP.
This isn't "false sharing" strictly speaking (it's more like "true
non-sharing"), but it creates the same SMP scalability bottleneck of
"false sharing".

To verify the improvement, below test is done on 40 cpus host with
Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (must be with
CONFIG_GUP_TEST=y):

  $ sudo chrt -f 1 ./gup_test -a  -m 512 -j 40

Where we can get (average value for 40 threads):

  Old kernel: 477729.97 (+- 3.79%)
  New kernel:  89144.65 (+-11.76%)

On a similar condition with 256 cpus, this commits increases the SMP
scalability of pin_user_pages_fast() executed by different threads of the
same process by more than 4000%.

[peterx@redhat.com: rewrite commit message, add parentheses against "(A & B)"]

Link: https://lkml.kernel.org/r/20210507150553.208763-3-peterx@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/gup: Fix pin page write cache bouncing on has_pinned", v2.

This series contains 3 patches, the 1st one enables threading for
gup_benchmark in the kselftest.  The latter two patches are collected from
Andrea's local branch which can fix write cache bouncing issue with
pinning fast-gup.

To be explicit on the latter two patches:

  - the 2nd patch fixes the perf degrade when introducing has_pinned, then

  - the last patch tries to remove the has_pinned with a bit in mm->flags

For patch 3: originally I think we had a plan to reuse has_pinned into a
counter very soon, however that's not happening at least until today, so
maybe it proves that we can remove it until we really want such a counter
for whatever reason.  As the commit message stated, it saves 4 bytes for
each mm without observable regressions.

Regarding testing: we can reference to the commit message of patch 2 for
some detailed testing with will-is-scale.  Meanwhile I did patch 1 just
because then we can even easily verify the patchset using the existing
kselftest facilities or even regress test it in the future with the repo
if we want.

Below numbers are extra verification tests that I did besides commit
message of patch 2 using the new gup_benchmark and 256 cpus.  Below test
is done on 40 cpus host with Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz,
and I can get similar result (of course the write cache bouncing get
severe with even more cores).

After patch 1 applied (only test patch, so using old kernel):

  $ sudo chrt -f 1 ./gup_test -a  -m 512 -j 40
  PIN_FAST_BENCHMARK: Time: get:459632 put:5990 us
  PIN_FAST_BENCHMARK: Time: get:461967 put:5840 us
  PIN_FAST_BENCHMARK: Time: get:464521 put:6140 us
  PIN_FAST_BENCHMARK: Time: get:465176 put:7100 us
  PIN_FAST_BENCHMARK: Time: get:465960 put:6733 us
  PIN_FAST_BENCHMARK: Time: get:465324 put:6781 us
  PIN_FAST_BENCHMARK: Time: get:466018 put:7130 us
  PIN_FAST_BENCHMARK: Time: get:466362 put:7118 us
  PIN_FAST_BENCHMARK: Time: get:465118 put:6975 us
  PIN_FAST_BENCHMARK: Time: get:466422 put:6602 us
  PIN_FAST_BENCHMARK: Time: get:465791 put:6818 us
  PIN_FAST_BENCHMARK: Time: get:467091 put:6298 us
  PIN_FAST_BENCHMARK: Time: get:467694 put:5432 us
  PIN_FAST_BENCHMARK: Time: get:469575 put:5581 us
  PIN_FAST_BENCHMARK: Time: get:468124 put:6055 us
  PIN_FAST_BENCHMARK: Time: get:468877 put:6720 us
  PIN_FAST_BENCHMARK: Time: get:467212 put:4961 us
  PIN_FAST_BENCHMARK: Time: get:467834 put:6697 us
  PIN_FAST_BENCHMARK: Time: get:470778 put:6398 us
  PIN_FAST_BENCHMARK: Time: get:469788 put:6310 us
  PIN_FAST_BENCHMARK: Time: get:488277 put:7113 us
  PIN_FAST_BENCHMARK: Time: get:486613 put:7085 us
  PIN_FAST_BENCHMARK: Time: get:486940 put:7202 us
  PIN_FAST_BENCHMARK: Time: get:488728 put:7101 us
  PIN_FAST_BENCHMARK: Time: get:487570 put:7327 us
  PIN_FAST_BENCHMARK: Time: get:489260 put:7027 us
  PIN_FAST_BENCHMARK: Time: get:488846 put:6866 us
  PIN_FAST_BENCHMARK: Time: get:488521 put:6745 us
  PIN_FAST_BENCHMARK: Time: get:489950 put:6459 us
  PIN_FAST_BENCHMARK: Time: get:489777 put:6617 us
  PIN_FAST_BENCHMARK: Time: get:488224 put:6591 us
  PIN_FAST_BENCHMARK: Time: get:488644 put:6477 us
  PIN_FAST_BENCHMARK: Time: get:488754 put:6711 us
  PIN_FAST_BENCHMARK: Time: get:488875 put:6743 us
  PIN_FAST_BENCHMARK: Time: get:489290 put:6657 us
  PIN_FAST_BENCHMARK: Time: get:490264 put:6684 us
  PIN_FAST_BENCHMARK: Time: get:489631 put:6737 us
  PIN_FAST_BENCHMARK: Time: get:488434 put:6655 us
  PIN_FAST_BENCHMARK: Time: get:492213 put:6297 us
  PIN_FAST_BENCHMARK: Time: get:491124 put:6173 us

After the whole series applied (new fixed kernel):

  $ sudo chrt -f 1 ./gup_test -a  -m 512 -j 40
  PIN_FAST_BENCHMARK: Time: get:82038 put:7041 us
  PIN_FAST_BENCHMARK: Time: get:82144 put:6817 us
  PIN_FAST_BENCHMARK: Time: get:83417 put:6674 us
  PIN_FAST_BENCHMARK: Time: get:82540 put:6594 us
  PIN_FAST_BENCHMARK: Time: get:83214 put:6681 us
  PIN_FAST_BENCHMARK: Time: get:83444 put:6889 us
  PIN_FAST_BENCHMARK: Time: get:83194 put:7499 us
  PIN_FAST_BENCHMARK: Time: get:84876 put:7369 us
  PIN_FAST_BENCHMARK: Time: get:86092 put:10289 us
  PIN_FAST_BENCHMARK: Time: get:86153 put:10415 us
  PIN_FAST_BENCHMARK: Time: get:85026 put:7751 us
  PIN_FAST_BENCHMARK: Time: get:85458 put:7944 us
  PIN_FAST_BENCHMARK: Time: get:85735 put:8154 us
  PIN_FAST_BENCHMARK: Time: get:85851 put:8299 us
  PIN_FAST_BENCHMARK: Time: get:86323 put:9617 us
  PIN_FAST_BENCHMARK: Time: get:86288 put:10496 us
  PIN_FAST_BENCHMARK: Time: get:87697 put:9346 us
  PIN_FAST_BENCHMARK: Time: get:87980 put:8382 us
  PIN_FAST_BENCHMARK: Time: get:88719 put:8400 us
  PIN_FAST_BENCHMARK: Time: get:87616 put:8588 us
  PIN_FAST_BENCHMARK: Time: get:86730 put:9563 us
  PIN_FAST_BENCHMARK: Time: get:88167 put:8673 us
  PIN_FAST_BENCHMARK: Time: get:86844 put:9777 us
  PIN_FAST_BENCHMARK: Time: get:88068 put:11774 us
  PIN_FAST_BENCHMARK: Time: get:86170 put:15676 us
  PIN_FAST_BENCHMARK: Time: get:87967 put:12827 us
  PIN_FAST_BENCHMARK: Time: get:95773 put:7652 us
  PIN_FAST_BENCHMARK: Time: get:87734 put:13650 us
  PIN_FAST_BENCHMARK: Time: get:89833 put:14237 us
  PIN_FAST_BENCHMARK: Time: get:96186 put:8029 us
  PIN_FAST_BENCHMARK: Time: get:95532 put:8886 us
  PIN_FAST_BENCHMARK: Time: get:95351 put:5826 us
  PIN_FAST_BENCHMARK: Time: get:96401 put:8407 us
  PIN_FAST_BENCHMARK: Time: get:96473 put:8287 us
  PIN_FAST_BENCHMARK: Time: get:97177 put:8430 us
  PIN_FAST_BENCHMARK: Time: get:98120 put:5263 us
  PIN_FAST_BENCHMARK: Time: get:96271 put:7757 us
  PIN_FAST_BENCHMARK: Time: get:99628 put:10467 us
  PIN_FAST_BENCHMARK: Time: get:99344 put:10045 us
  PIN_FAST_BENCHMARK: Time: get:94212 put:15485 us

Summary:

  Old kernel: 477729.97 (+-3.79%)
  New kernel:  89144.65 (+-11.76%)

This patch (of 3):

Add a new parameter "-j N" to support concurrent gup test.

Link: https://lkml.kernel.org/r/20210507150553.208763-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210507150553.208763-2-peterx@redhat.comSigned-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions implement the address_space ->set_page_dirty operation and
should live in pagemap.h, not mm.h so that the rest of the kernel doesn't
get funny ideas about calling them directly.

Link: https://lkml.kernel.org/r/20210615162342.1669332-7-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use __set_page_dirty_no_writeback() instead.  This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future.  It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.

[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]

Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use __set_page_dirty_no_writeback() instead.  This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future.  It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.

Link: https://lkml.kernel.org/r/20210615162342.1669332-5-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only difference between iomap_set_page_dirty() and
__set_page_dirty_nobuffers() is that the latter includes a debugging check
that a !Uptodate page has private data.

Link: https://lkml.kernel.org/r/20210615162342.1669332-4-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is fundamentally the same code, so just call it instead of
duplicating it.

Link: https://lkml.kernel.org/r/20210615162342.1669332-3-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Further set_page_dirty cleanups".

Prompted by Christoph's recent patches, here are some more patches to
improve the state of set_page_dirty().  They're all from the folio tree,
so they've been tested to a certain extent.

This patch (of 6):

Nothing in __set_page_dirty() is specific to buffer_head, so move it to
mm/page-writeback.c.  That removes the only caller of
account_page_dirtied() outside of page-writeback.c, so make it static.

Link: https://lkml.kernel.org/r/20210615162342.1669332-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20210615162342.1669332-2-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire
that method up for the missing instances.

[hch@lst.de: ecryptfs: add a ->set_page_dirty cludge]
  Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de

Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the ramfs aops to libfs and reuse them for kernfs and configfs.
Thosw two did not wire up ->set_page_dirty before and now get
__set_page_dirty_no_writeback, which is the right one for no-writeback
address_space usage.

Drop the now unused exports of the libfs helpers only used for ramfs-style
pagecache usage.

Link: https://lkml.kernel.org/r/20210614061512.3966143-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>