Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 9月, 2017 5 次提交
  3. 30 8月, 2017 3 次提交
    • P
      MIPS: GIC: Introduce asm/mips-gic.h with accessor functions · 582e2b4a
      由 Paul Burton 提交于 
      This patch introduces a new header providing accessor functions for the
MIPS Global Interrupt Controller (GIC) mirroring those provided for the
other 2 components of the MIPS Coherent Processing System (CPS) - the
Coherence Manager (CM) & Cluster Power Controller (CPC).

This header makes use of the new standardised CPS accessor macros where
possible, but does require some custom accessors for cases where we have
either a bit or a register per interrupt.

A major advantage of this over the existing
include/linux/irqchip/mips-gic.h definitions is that code performing
accesses can become much simpler, for example this:

  gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_TRIGGER) +
                  GIC_INTR_OFS(intr), 1ul << GIC_INTR_BIT(intr),
                  (unsigned long)trig << GIC_INTR_BIT(intr));

...can become simply:

  change_gic_trig(intr, trig);

The accessors handle 32 vs 64 bit in the same way as for CM & CPC code,
which means that GIC code will also not need to worry about the access
size in most cases. They are also accessible outside of
drivers/irqchip/irq-mips-gic.c which will allow for simplification in
the use of the non-interrupt portions of the GIC (eg. counters) which
currently require the interrupt controller driver to expose helper
functions for access.

This patch doesn't change any existing code over to use the new
accessors yet, since a wholesale change would be invasive & difficult to
review. Instead follow-on patches will convert code piecemeal to use
this new header. The one change to existing code is to rename gic_base
to mips_gic_base & make it global, in order to fit in with the naming
expected by the standardised CPS accessor macros.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17020/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      582e2b4a
    • J
      irqchip: mips-gic: SYNC after enabling GIC region · a0ffec3d
      由 James Hogan 提交于 
      A SYNC is required between enabling the GIC region and actually trying
to use it, even if the first access is a read, otherwise its possible
depending on the timing (and in my case depending on the precise
alignment of certain kernel code) to hit CM bus errors on that first
access.

Add the SYNC straight after setting the GIC base.

[paul.burton@imgtec.com:
  Changes later in this series increase our likelihood of hitting this
  by reducing the amount of code that runs between enabling the GIC &
  accessing it.]

Fixes: a7057270 ("irqchip: mips-gic: Add device-tree support")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17019/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      a0ffec3d
    • P
      MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers · e83f7e02
      由 Paul Burton 提交于 
      With Coherence Manager (CM) 3.5 information about the topology of the
system, which has previously only been available through & accessed from
the CM, is now also provided by the Cluster Power Controller (CPC). This
includes a new CPC_CONFIG register mirroring GCR_CONFIG, and similarly a
new CPC_Cx_CONFIG register mirroring GCR_Cx_CONFIG.

In preparation for adjusting functions such as mips_cm_numcores(), which
have previously only needed to access the CM, to also access the CPC
this patch modifies the way we use the various CPS headers. Rather than
having users include asm/mips-cm.h or asm/mips-cpc.h individually we
instead have users include asm/mips-cps.h which in turn includes
asm/mips-cm.h & asm/mips-cpc.h. This means that users will gain access
to both CM & CPC registers by including one header, and most importantly
it makes asm/mips-cps.h an ideal location for helper functions which
need to access the various components of the CPS.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17015/
Patchwork: https://patchwork.linux-mips.org/patch/17217/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      e83f7e02
  5. 29 8月, 2017 1 次提交
    • P
      MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts · 93c5bba5
      由 Paul Burton 提交于 
      There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h
when declaring macros corresponding to register fields. This patch
modifies our definitions to do so.

The *_SHF definitions are removed entirely - they duplicate information
found in the masks, are infrequently used & can be replaced with use of
__ffs() where needed.

The *_MSK definitions then lose their _MSK suffix which is now somewhat
redundant, and users are modified to match.

The field definitions are moved to follow the appropriate register's
accessor functions, which helps to keep the field definitions in order &
to find the appropriate fields for a given register. Whilst here a
comment is added describing each register & including its name, which is
helpful both for linking the register back to hardware documentation &
for grepping purposes.

This also cleans up a couple of issues that became obvious as a result
of making the changes described above:

  - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony
    copy of that named GCR_RESET_EXT_BASE - a register which does not
    exist. The bad definitions were added by commit 497e803e ("MIPS:
    smp-cps: Ensure secondary cores start with EVA disabled") and made
    use of from boot_core(), which is now modified to use the
    GCR_Cx_RESET_EXT_BASE definitions.

  - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly
    define this as inFo rather than inGo.

Now that we don't duplicate field information between _SHF & _MSK
definitions, and keep the fields next to the register accessors, it will
be much easier to spot & prevent any similar oddities being introduced
in the future.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17001/
Patchwork: https://patchwork.linux-mips.org/patch/17216/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      93c5bba5
  7. 18 7月, 2017 1 次提交
  9. 23 6月, 2017 1 次提交
  11. 22 6月, 2017 1 次提交
  13. 21 6月, 2017 1 次提交
  15. 20 4月, 2017 3 次提交
    • M
      irqchip/mips-gic: Replace static map with dynamic · 8ada00a6
      由 Matt Redfearn 提交于 
      Commit 4cfffcfa ("irqchip/mips-gic: Fix local interrupts") fixed
local interrupts by creating virq mappings for them all at startup.
Unfortunately this change broke legacy IRQ controllers in the same
system, such as the i8259 on the Malta platform, as it allocates virq
numbers that were expected to be available for the legacy controller.

Instead of creating the mappings statically when the GIC is probed,
re-introduce the irq domain .map function, removed by commit e875bd66
("irqchip/mips-gic: Fix local interrupts") and use it to set up the irq
handler and chip. Since a good deal of the required functionality is
already implemented by gic_irq_domain_alloc, repurpose that function for
gic_irq_domain_map and add a new gic_irq_domain_alloc which wraps
gic_irq_domain_map with the necessary conversion.

This change fixes the legacy interrupt controller of the Malta platform
without breaking the perf interrupt fixed by commit e875bd66
("irqchip/mips-gic: Fix local interrupts").
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492679256-14513-4-git-send-email-matt.redfearn@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      8ada00a6
    • P
      irqchip/mips-gic: Remove device IRQ domain · b87281e7
      由 Paul Burton 提交于 
      In commit c98c1822 ("irqchip/mips-gic: Add device hierarchy domain")
Qais indicates that he felt having a separate device IRQ domain was
cleaner, but along with everyone else I'm aware of touching this driver
I disagree.

Remove the separate device IRQ domain so that we simply have the main
GIC IRQ domain used for devices, and an IPI IRQ domain as a child. The
logic for handling the device interrupts & IPIs is cleanly separated
into the appropriate domain ops, making it much easier to reason about
what the driver is doing than the previous approach where the 2 child
domains had to call up to their parent, which had to handle both types
of interrupt & had all sorts of weird & wonderful duplication or
outright clobbering of setup performed by multiple domains.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492679256-14513-3-git-send-email-matt.redfearn@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      b87281e7
    • P
      irqchip/mips-gic: Separate IPI reservation & usage tracking · f8dcd9e8
      由 Paul Burton 提交于 
      Since commit 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy
domain") introduced the GIC IPI IRQ domain we have tracked both
reservation of interrupts & their use with a single bitmap - ipi_resrv.
If an interrupt is reserved for use as an IPI but not actually in use
then the appropriate bit is set in ipi_resrv. If an interrupt is either
not reserved for use as an IPI or has been allocated as one then the
appropriate bit is clear in ipi_resrv.

Unfortunately this means that checking whether a bit is set in ipi_resrv
to prevent IPI interrupts being allocated for use with a device is
broken, because if the interrupt has been allocated as an IPI first then
its bit will be clear.

Fix this by separating the tracking of IPI reservation & usage,
introducing a separate ipi_available bitmap for the latter. This means
that ipi_resrv will now always have bits set corresponding to all
interrupts reserved for use as IPIs, whether or not they have been
allocated yet, and therefore that checking it when allocating device
interrupts works as expected.

Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492679256-14513-2-git-send-email-matt.redfearn@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      f8dcd9e8
  17. 31 3月, 2017 1 次提交
    • M
      irqchip/mips-gic: Fix Local compare interrupt · 42969893
      由 Matt Redfearn 提交于 
      Commit 4cfffcfa ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:

clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738,
max_idle_ns: 440795203769 ns
GIC timer IRQ 25 setup failed: -22

This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.

Fixes: 4cfffcfa ("irqchip/mips-gic: Fix local interrupts")
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      42969893
  19. 08 2月, 2017 1 次提交
    • M
      irqchip/mips-gic: Fix local interrupts · 4cfffcfa
      由 Marcin Nowakowski 提交于 
      Some local interrupts are not initialised properly at the moment and
cannot be used since the domain's alloc method is never called for them.

This has been observed earlier and partially fixed in commit
e875bd66 ("irqchip/mips-gic: Fix local interrupts"), but that change
still relied on the interrupt to be requested by an external driver (eg.
drivers/clocksource/mips-gic-timer.c).

This does however not solve the issue for interrupts that are not
referenced by any driver through the device tree and results in
request_irq() calls returning -ENOSYS. It can be observed when attempting
to use perf tool to access hardware performance counters.

Fix this by explicitly calling irq_create_fwspec_mapping() for local
interrupts.

Fixes: e875bd66 ("irqchip/mips-gic: Fix local interrupts")
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      4cfffcfa
  21. 25 12月, 2016 1 次提交
  23. 21 9月, 2016 2 次提交
    • P
      irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs · 0f4ed158
      由 Paul Burton 提交于 
      The MIPS GIC driver has previously iterated over bits set in a bitmap
representing pending local IRQs by calling find_first_bit, clearing that
bit then calling find_first_bit again until all bits are clear. If
multiple interrupts are pending then this is wasteful, as find_first_bit
will have to loop over the whole bitmap from the start. Use the
for_each_set_bit macro which performs exactly what we need here instead.
It will use find_next_bit and thus only scan over the relevant part of
the bitmap, and it makes the intent of the code clearer.

This makes the same change for local interrupts that commit cae750ba
("irqchip: mips-gic: Use for_each_set_bit to iterate over IRQs") made
for shared interrupts.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/20160913165427.31686-1-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      0f4ed158
    • P
      irqchip/mips-gic: Fix local interrupts · e875bd66
      由 Paul Burton 提交于 
      Since the device hierarchy domain was added by commit c98c1822
("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts
have been broken.

Users attempting to setup a per-cpu local IRQ, for example the GIC timer
clock events code in drivers/clocksource/mips-gic-timer.c, the
setup_percpu_irq function would refuse with -EINVAL because the GIC
irqchip driver never called irq_set_percpu_devid so the
IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because
irq_set_percpu_devid was being called from the gic_irq_domain_map
function which is no longer called.

Doing only that runs into further problems because gic_dev_domain_alloc
set the struct irq_chip for all interrupts, local or shared, to
gic_level_irq_controller despite that only being suitable for shared
interrupts. The typical outcome of this is that gic_level_irq_controller
callback functions are called for local interrupts, and then hwirq
number calculations overflow & the driver ends up attempting to access
some invalid register with an address calculated from an invalid hwirq
number. Best case scenario is that this then leads to a bus error. This
is fixed by abstracting the setup of the hwirq & chip to a new function
gic_setup_dev_chip which is used by both the root GIC IRQ domain & the
device domain.

Finally, decoding local interrupts failed because gic_dev_domain_alloc
only called irq_domain_alloc_irqs_parent for shared interrupts. Local
ones were therefore never associated with hwirqs in the root GIC IRQ
domain and the virq in gic_handle_local_int would always be 0. This is
fixed by calling irq_domain_alloc_irqs_parent unconditionally & having
gic_irq_domain_alloc handle both local & shared interrupts, which is
easy due to the aforementioned abstraction of chip setup into
gic_setup_dev_chip.

This fixes use of the MIPS GIC timer for clock events, which has been
broken since c98c1822 ("irqchip/mips-gic: Add device hierarchy
domain") but hadn't been noticed due to a silent fallback to the MIPS
coprocessor 0 count/compare clock events device.

Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      e875bd66
  25. 23 8月, 2016 3 次提交
    • P
      irqchip/mips-gic: Use for_each_set_bit to iterate over IRQs · cae750ba
      由 Paul Burton 提交于 
      The MIPS GIC driver has previously iterated over bits set in a bitmap
representing pending IRQs by calling find_first_bit, clearing that bit
then calling find_first_bit again until all bits are clear. If multiple
interrupts are pending then this is wasteful, as find_first_bit will
have to loop over the whole bitmap from the start. Use the
for_each_set_bit macro which performs exactly what we need here instead.
It will use find_next_bit and thus only scan over the relevant part of
the bitmap, and it makes the intent of the code more clear.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Link: https://lkml.kernel.org/r/20160819171119.28121-1-paul.burton@imgtec.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>
      cae750ba
    • P
      irqchip/mips-gic: Implement activate op for device domain · 2564970a
      由 Paul Burton 提交于 
      If an IRQ is setup using __setup_irq(), which is used by the
request_irq() family of functions, and we are using an SMP kernel then
the affinity of the IRQ will be set via setup_affinity() immediately
after the IRQ is enabled. This call to gic_set_affinity() will lead to
the interrupt being mapped to a VPE. However there are other ways to use
IRQs which don't cause affinity to be set, for example if it is used to
chain to another IRQ controller with irq_set_chained_handler_and_data().
The irq_set_chained_handler_and_data() code path will enable the IRQ,
but will not trigger a call to gic_set_affinity() and in this case
nothing will map the interrupt to a VPE, meaning that the interrupt is
never received.

Fix this by implementing the activate operation for the GIC device IRQ
domain, using gic_shared_irq_domain_map() to map the interrupt to the
correct pin of cpu 0.

Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160819170715.27820-2-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      2564970a
    • P
      irqchip/mips-gic: Cleanup chip and handler setup · 6a33fa2b
      由 Paul Burton 提交于 
      gic_shared_irq_domain_map() is called from gic_irq_domain_alloc() where
the wrong chip has been set, and is then overwritten. Tidy this up by
setting the correct chip the first time, and setting the
handle_level_irq handler from gic_irq_domain_alloc() too.

gic_shared_irq_domain_map() is also called from gic_irq_domain_map(),
which now calls irq_set_chip_and_handler() to retain its previous
behaviour.

This patch prepares for a follow-on which will call
gic_shared_irq_domain_map() from a callback where the lock on the struct
irq_desc is held, which without this change would cause the call to
irq_set_chip_and_handler() to lead to a deadlock.

Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160819170715.27820-1-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      6a33fa2b
  27. 04 8月, 2016 1 次提交
    • M
      tree-wide: replace config_enabled() with IS_ENABLED() · 97f2645f
      由 Masahiro Yamada 提交于 
      The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will Drewry <wad@chromium.org>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      97f2645f
  29. 05 7月, 2016 2 次提交
    • P
      irqchip/mips-gic: Match IPI IRQ domain by bus token only · 547aefc4
      由 Paul Burton 提交于 
      Commit fbde2d7d ("MIPS: Add generic SMP IPI support") introduced
code which calls irq_find_matching_host with a NULL node parameter in
order to discover IPI IRQ domains which are not associated with the DT
root node's interrupt parent. This suggests that implementations of IPI
IRQ domains should effectively ignore the node parameter if it is NULL
and search purely based upon the bus token. Commit 2af70a96
("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when
implementing the GIC IPI IRQ domain, and on MIPS Boston boards this
leads to no IPI domain being discovered and a NULL pointer dereference
when attempting to send an IPI:

  CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c
  Oops[#1]:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945
  task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000
  $ 0   : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003
  $ 4   : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000
  $ 8   : 0000000000000000 0000000000000023 0000000000000001 0000000000000001
  $12   : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000
  $16   : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc
  $20   : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000
  $24   : 0000000000000000 ffffffff8012de28
  $28   : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c
  Hi    : ffffffff8014c174
  Lo    : a800000001e1e140
  epc   : ffffffff8016e70c __ipi_send_mask+0x24/0x11c
  ra    : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178
  Status: 140084e2        KX SX UX KERNEL EXL
  Cause : 00800008 (ExcCode 02)
  BadVA : 0000000000000040
  PrId  : 0001a920 (MIPS I6400)
  Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000)
  Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc
            0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c
            0000000000000001 0000000000000020 0000000000000000 0000000000000000
            0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001
            0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8
            a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002
            ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc
            0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001
            ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50
            0000000000000003 a800000001e48308 0000000000000003 0000000000000008
            ...
  Call Trace:
  [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c
  [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178
  [<ffffffff801865e8>] generic_exec_single+0x150/0x170
  [<ffffffff801868b8>] smp_call_function_single+0x108/0x160
  [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394
  [<ffffffff80110534>] __cpu_up+0x38/0x90
  [<ffffffff8012de4c>] bringup_cpu+0x24/0xac
  [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc
  [<ffffffff8012e648>] cpu_up+0x118/0x18c
  [<ffffffff806dc158>] smp_init+0xbc/0xe8
  [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228
  [<ffffffff8056c908>] kernel_init+0x10/0xf0
  [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c

Fix this by allowing the GIC IPI IRQ domain to match purely based upon
the bus token if the node provided is NULL.

Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160705132600.27730-2-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      547aefc4
    • P
      irqchip/mips-gic: Map to VPs using HW VPNum · 99ec8a36
      由 Paul Burton 提交于 
      When mapping an interrupt to a VP(E) we must use the identifier for the
VP that the hardware expects, and this does not always match up with the
Linux CPU number. Commit d46812bb ("irqchip: mips-gic: Use HW IDs
for VPE_OTHER_ADDR") corrected this for the cases that existed at the
time it was written, but commit 2af70a96 ("irqchip/mips-gic: Add a
IPI hierarchy domain") added another case before the former patch was
merged. This leads to incorrectly using Linux CPU numbers when mapping
interrupts to VPs, which breaks on certain systems such as those with
multi-core I6400 CPUs. Fix by adding the appropriate call to
mips_cm_vp_id() to retrieve the expected VP identifier.

Fixes: d46812bb ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR")
Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160705132600.27730-1-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      99ec8a36
  31. 14 6月, 2016 2 次提交
  33. 28 5月, 2016 1 次提交
  35. 13 5月, 2016 2 次提交
  37. 22 4月, 2016 1 次提交
    • P
      irqchip/mips-gic: Don't overrun pcpu_masks array · 91951f98
      由 Paul Burton 提交于 
      Commit 2a078705 ("irqchip/mips-gic: Use gic_vpes instead of
NR_CPUS") & commit 78930f09 ("irqchip/mips-gic: Clear percpu_masks
correctly when mapping") both introduce code which accesses gic_vpes
entries in the pcpu_masks array. However, this array has length NR_CPUS.
If NR_CPUS is less than gic_vpes (ie. the kernel supports use of less
CPUs than are present in the system) then we overrun the array, clobber
some other data & generally die pretty promptly.

Most notably this affects uniprocessor kernels running on any multicore
or multithreaded Malta with a GIC (ie. the vast majority of real Malta
boards).

Fix this by only accessing up to min(gic_vpes, NR_CPUS) entries in the
pcpu_masks array, preventing the array overrun.

Fixes: 2a078705 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS")
Fixes: 78930f09 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1461234714-9975-1-git-send-email-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      91951f98
  39. 25 2月, 2016 6 次提交
  41. 11 11月, 2015 1 次提交
    • A
      irqchip: irq-mips-gic: Provide function to map GIC user section · c0a9f72c
      由 Alex Smith 提交于 
      The GIC provides a "user-mode visible" section containing a mirror of
the counter registers which can be mapped into user memory. This will
be used by the VDSO time function implementations, so provide a
function to map it in.

When the GIC is not enabled in Kconfig a dummy inline version of this
function is provided, along with "#define gic_present 0", so that we
don't have to litter the VDSO code with ifdefs.

[markos.chandras@imgtec.com:
  - Move mapping code to arch/mips/kernel/vdso.c and use a resource
    type to get the GIC usermode information
  - Avoid renaming function arguments and use __gic_base_addr to hold
    the base GIC address prior to ioremap.]
[ralf@linux-mips.org: Fix up gic_get_usm_range() to compile and make inline
again.]
Signed-off-by: NAlex Smith <alex.smith@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/11281/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      c0a9f72c