ocfs2_cp_xattr_cluster() takes the last cluster of an xattr extent,
copies its buckets to the front of a new extent, and then shrinks the bucket
count of the original extent.  So it's really moving the data, not
copying it.

While we're here, the function doesn't need a buffer_head for the old
extent, just the block number.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The buffer copy loop of ocfs2_mv_xattr_bucket_cross_cluster() actually
looks a lot like ocfs2_cp_xattr_bucket().  Let's just use that instead.
We also use bucket operations to update the buckets at the start of each
extent.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

I was unsure of the JOURNAL_ACCESS parameters in
ocfs2_cp_xattr_cluster().  They're based on the function argument
't_is_new', but I couldn't quite figure out how t_is_new mapped to
allocation.  ocfs2_cp_xattr_cluster() actually overwrites the target,
regardless of t_is_new.

Well, I just figured it out.  So I'm adding a big fat comment for those
who come after me.  ocfs2_divide_xattr_cluster() has the same behavior.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2_cp_xattr_cluster() takes the last bucket of a full extent and
copies it over to a new extent.  It then updates the headers of both
extents to reflect the new state.  It is passed the first bh of
the first bucket in order to update that first extent's bucket count.
It reads and dirties the first bh of the new extent for the same reason.

However, future code wants to always dirty the entire bucket when it
is changed.  So it is changed to read the entire bucket it is updating
for both extents.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2_extend_xattr_bucket() takes an extent of buckets and shifts some
of them down to make room for a new xattr.  It is passed the first bh of
the first bucket, because that is where we store the number of buckets
in the extent.

However, future code wants to always dirty the entire bucket when it
is changed.  So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic.  We also
can skip passing in the target bucket bh - we only need its block
number.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

We move the transaction into the loop because in
ocfs2_remove_extent, we will double the credits in function
ocfs2_extend_rotate_transaction. So if we have a large loop
number, we will soon waste much the journal space.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2_bucket_value_truncate() currently takes the first bh of the
bucket, and magically plays around with the value bh - even though
the bucket structure in the calling function already has it.

In addition, future code wants to always dirty the entire bucket when it
is changed.  So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic.

ocfs2_xattr_update_value_size() is no longer necessary, as it only did
one thing other than journal access/dirty.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Add quota calls for allocation and freeing of inodes and space, also update
estimates on number of needed credits for a transaction. Move out inode
allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called
outside of a transaction.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

During an xattr set, when we move a xattr which was stored in inode to the
outside bucket, we have to delete it and it will use the old value of
xis->not_found. xis->not_found is removed by ocfs2_calc_xattr_set_need
though, so we must restore it.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

When we extend one xattr's value to a large size, the old value size might
be smaller than the size of a value root. In those cases, we still need to
guess the metadata allocation.
Reported-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Add an optional validation hook to ocfs2_read_blocks().  Now the
validation function is only called when a block was actually read off of
disk.  It is not called when the buffer was in cache.

We add a buffer state bit BH_NeedsValidate to flag these buffers.  It
must always be one higher than the last JBD2 buffer state bit.

The dinode, dirblock, extent_block, and xattr_block validators are
lifted to this scheme directly.  The group_descriptor validator needs to
be split into two pieces.  The first part only needs the gd buffer and
is passed to ocfs2_read_block().  The second part requires the dinode as
well, and is called every time.  It's only 3 compares, so it's tiny.
This also allows us to clean up the non-fatal gd check used by resize.c.
It now has no magic argument.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

We weren't consistently checking xattr blocks after we read them.
Most places checked the signature, but none checked xb_blkno or
xb_fs_signature.  Create a toplevel ocfs2_read_xattr_block() that does
the read and the validation.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

We need to get the parent directories acls and let the new child inherit it.
To this, we add additional calculations for data/metadata allocation.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert
struct posix_acl to many ocfs2_acl_entry and regard them as an extended
attribute entry.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This function does the work of ocfs2_xattr_get under an open lock.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Security attributes must be set when creating a new inode.

We do this in three steps.

- First, get security xattr's name and value by security_operation

- Calculate and reserve the meta data and clusters needed by this security
  xattr before starting transaction

- Finally, we set it before add_entry
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This patch add security xattr set/get/list APIs to
support security attributes in Ocfs2.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.

I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.

Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Move clusters free process into dealloc context so that
they can be freed after the transaction.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Joel has refactored xattr bucket and make xattr bucket a general
wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the
bucket in, so there is no need to allocate a new one and read it.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_set_entry_in_bucket() function is already working on an
ocfs2_xattr_bucket structure, so let's use the bucket API.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Use the ocfs2_xattr_bucket abstraction for reading and writing the
bucket in ocfs2_defrag_xattr_bucket().
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers.  We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot.  While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket
as its abstraction.  This makes for more efficient reads, as buckets are
linear blocks, and also has improved caching characteristics.  It also
reads better.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit
large to have on the stack.  Just like ocfs2_path, let's allocate it
with a ocfs2_xattr_bucket_new() function.

We can now store the inode on the bucket, cleaning up all the other
bucket functions.  While we're here, we catch another place or two that
wasn't using ocfs2_read_xattr_bucket().

Updates:
- No longer allocating xis.bucket, as it will never be used.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Now that the places that copy whole buckets are using struct
ocfs2_xattr_bucket, we can do the copy in a dedicated function.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

A common action is to call ocfs2_journal_access() and
ocfs2_journal_dirty() on the buffer heads of an xattr bucket.  Let's
create nice wrappers.

While we're there, let's drop the places that try to be smart by writing
only the first and last blocks of a bucket.  A bucket is contiguous, so
writing the whole thing is actually more efficient.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2_read_xattr_bucket() function would read an xattr bucket into a
list of buffer heads.  However, we have a nice ocfs2_xattr_bucket
structure.  Let's have it fill that out instead.

In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for
a bucket that's never been on disk before.  That's confusing.  Let's
call that functionality ocfs2_init_xattr_bucket().

The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are
updated to use the ocfs2_xattr_bucket structure rather than raw bh
lists.  That way they can use the new read/init calls.  In addition,
they drop the wasted read of an existing target bucket.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

A common theme is walking all the buffer heads on an ocfs2_xattr_bucket
and releasing them.  Let's wrap that.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The xattr code often wants to access the ocfs2_xattr_header at the start
of an bucket.  Rather than walk the pointer chains, let's just create
another nice macro.  As a side benefit, we can get rid of the mostly
spurious ->bu_xh element on the bucket structure.  The idea is ripped
from the ocfs2_path code.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The xattr code often wants to access the data pointer for blocks in an
xattr bucket.  This is usually found by dereferencing the bh array
hanging off of the ocfs2_xattr_bucket structure.  Rather than do this
all the time, let's provide a nice little macro.  The idea is ripped
from the ocfs2_path code.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The xattr code often wants to know the block number of an xattr bucket.
This is usually found by dereferencing the first bh hanging off of the
ocfs2_xattr_bucket structure.  Rather than do this all the time, let's
provide a nice little macro.  The idea is ripped from the ocfs2_path
code.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_bucket structure keeps track of the buffers for one
xattr bucket.  Let's prefix the fields for easier code navigation.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external
xattr, but doesn't check the search result that is passed back via struct
ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if
the xattr search failed. This avoids a later NULL pointer error.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Signed-off-by: NMark Fasheh <mfasheh@suse.com>