Symbolic permission names are used in bcache, for now octal permission
numbers are encouraged to use for readability. This patch replaces
all symbolic permissions by octal permission numbers.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes the lines over 80 characters into more lines, to minimize
warnings by checkpatch.pl. There are still some lines exceed 80 characters,
but it is better to be a single line and I don't change them.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are many function definitions do not have identifier argument names,
scripts/checkpatch.pl complains warnings like this,

 WARNING: function definition argument 'struct bcache_device *' should
  also have an identifier name
  #16735: FILE: writeback.h:120:
  +void bch_sectors_dirty_init(struct bcache_device *);

This patch adds identifier argument names to all bcache function
definitions to fix such warnings.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes warning reported by checkpatch.pl by replacing 'unsigned'
with 'unsigned int'.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit b1092c9a ("bcache: allow quick writeback when backing idle")
allows the writeback rate to be faster if there is no I/O request on a
bcache device. It works well if there is only one bcache device attached
to the cache set. If there are many bcache devices attached to a cache
set, it may introduce performance regression because multiple faster
writeback threads of the idle bcache devices will compete the btree level
locks with the bcache device who have I/O requests coming.

This patch fixes the above issue by only permitting fast writebac when
all bcache devices attached on the cache set are idle. And if one of the
bcache devices has new I/O request coming, minimized all writeback
throughput immediately and let PI controller __update_writeback_rate()
to decide the upcoming writeback rate for each bcache device.

Also when all bcache devices are idle, limited wrieback rate to a small
number is wast of thoughput, especially when backing devices are slower
non-rotation devices (e.g. SATA SSD). This patch sets a max writeback
rate for each backing device if the whole cache set is idle. A faster
writeback rate in idle time means new I/Os may have more available space
for dirty data, and people may observe a better write performance then.

Please note bcache may change its cache mode in run time, and this patch
still works if the cache mode is switched from writeback mode and there
is still dirty data on cache.

Fixes: Commit b1092c9a ("bcache: allow quick writeback when backing idle")
Cc: stable@vger.kernel.org #4.16+
Signed-off-by: NColy Li <colyli@suse.de>
Tested-by: NKai Krakow <kai@kaishome.de>
Tested-by: NStefan Priebe <s.priebe@profihost.ag>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch updates the code comment in struct cache with correct array
names, to make the code to be more comprehensible.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Greg KH suggests that normal code should not care about debugfs. Therefore
no matter successful or failed of debugfs_create_dir() execution, it is
unncessary to check its return value.

There are two functions called debugfs_create_dir() and check the return
value, which are bch_debug_init() and closure_debug_init(). This patch
changes these two functions from int to void type, and ignore return values
of debugfs_create_dir().

This patch does not fix exact bug, just makes things work as they should.
Signed-off-by: NColy Li <colyli@suse.de>
Suggested-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Kai Krakow <kai@kaishome.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In GC thread, we record the latest GC key in gc_done, which is expected
to be used for incremental GC, but in currently code, we didn't realize
it. When GC runs, front side IO would be blocked until the GC over, it
would be a long time if there is a lot of btree nodes.

This patch realizes incremental GC, the main ideal is that, when there
are front side I/Os, after GC some nodes (100), we stop GC, release locker
of the btree node, and go to process the front side I/Os for some times
(100 ms), then go back to GC again.

By this patch, when we doing GC, I/Os are not blocked all the time, and
there is no obvious I/Os zero jump problem any more.

Patch v2: Rename some variables and macros name as Coly suggested.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently we calculate the total amount of flash only devices dirty data
by adding the dirty data of each flash only device under registering
locker. It is very inefficient.

In this patch, we add a member flash_dev_dirty_sectors in struct cache_set
to record the total amount of flash only devices dirty data in real time,
so we didn't need to calculate the total amount of dirty data any more.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert bcache to embedded bio sets.
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is couple of string arrays that are used exclusively in sysfs.c.
Move it to there and make them static.

Besides above, it will allow further clean up.

No functional change intended.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently bcache does not handle backing device failure, if backing
device is offline and disconnected from system, its bcache device can still
be accessible. If the bcache device is in writeback mode, I/O requests even
can success if the requests hit on cache device. That is to say, when and
how bcache handles offline backing device is undefined.

This patch tries to handle backing device offline in a rather simple way,
- Add cached_dev->status_update_thread kernel thread to update backing
  device status in every 1 second.
- Add cached_dev->offline_seconds to record how many seconds the backing
  device is observed to be offline. If the backing device is offline for
  BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and
  call bcache_device_stop() to stop the bache device which linked to the
  offline backing device.

Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds,
its bcache device will be removed, then user space application writing on
it will get error immediately, and handler the device failure in time.

This patch is quite simple, does not handle more complicated situations.
Once the bcache device is stopped, users need to recovery the backing
device, register and attach it manually.

Changelog:
v3: call wait_for_kthread_stop() before exits kernel thread.
v2: remove "bcache: " prefix when calling pr_warn().
v1: initial version.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current code uses bdevname() or bio_devname() to reference gendisk
disk name when bcache needs to display the disk names in kernel message.
It was safe before bcache device failure handling patch set merged in,
because when devices are failed, there was deadlock to prevent bcache
printing error messages with gendisk disk name. But after the failure
handling patch set merged, the deadlock is fixed, so it is possible
that the gendisk structure bdev->hd_disk is released when bdevname() is
called to reference bdev->bd_disk->disk_name[]. This is why I receive
bug report of NULL pointers deference panic.

This patch stores gendisk disk name in a buffer inside struct cache and
struct cached_dev, then print out the offline device name won't reference
bdev->hd_disk anymore. And this patch also avoids extra function calls
of bdevname() and bio_devnmae().

Changelog:
v3, add Reviewed-by from Hannes.
v2, call bdevname() earlier in register_bdev()
v1, first version with segguestion from Junhui Tang.

Fixes: c7b7bd07 ("bcache: add io_disable to struct cached_dev")
Fixes: 5138ac67 ("bcache: fix misleading error message in bch_count_io_errors()")
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If a bcache device is configured to writeback mode, current code does not
handle write I/O errors on backing devices properly.

In writeback mode, write request is written to cache device, and
latter being flushed to backing device. If I/O failed when writing from
cache device to the backing device, bcache code just ignores the error and
upper layer code is NOT noticed that the backing device is broken.

This patch tries to handle backing device failure like how the cache device
failure is handled,
- Add a error counter 'io_errors' and error limit 'error_limit' in struct
  cached_dev. Add another io_disable to struct cached_dev to disable I/Os
  on the problematic backing device.
- When I/O error happens on backing device, increase io_errors counter. And
  if io_errors reaches error_limit, set cache_dev->io_disable to true, and
  stop the bcache device.

The result is, if backing device is broken of disconnected, and I/O errors
reach its error limit, backing device will be disabled and the associated
bcache device will be removed from system.

Changelog:
v2: remove "bcache: " prefix in pr_error(), and use correct name string to
    print out bcache device gendisk name.
v1: indeed this is new added in v2 patch set.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When there are too many I/O errors on cache device, current bcache code
will retire the whole cache set, and detach all bcache devices. But the
detached bcache devices are not stopped, which is problematic when bcache
is in writeback mode.

If the retired cache set has dirty data of backing devices, continue
writing to bcache device will write to backing device directly. If the
LBA of write request has a dirty version cached on cache device, next time
when the cache device is re-registered and backing device re-attached to
it again, the stale dirty data on cache device will be written to backing
device, and overwrite latest directly written data. This situation causes
a quite data corruption.

But we cannot simply stop all attached bcache devices when the cache set is
broken or disconnected. For example, use bcache to accelerate performance
of an email service. In such workload, if cache device is broken but no
dirty data lost, keep the bcache device alive and permit email service
continue to access user data might be a better solution for the cache
device failure.

Nix <nix@esperi.org.uk> points out the issue and provides the above example
to explain why it might be necessary to not stop bcache device for broken
cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant
suggestion to provide "always" and "auto" options to per-cached device
sysfs file stop_when_cache_set_failed. If cache set is retiring and the
backing device has no dirty data on cache, it should be safe to keep the
bcache device alive. In this case, if stop_when_cache_set_failed is set to
"auto", the device failure handling code will not stop this bcache device
and permit application to access the backing device with a unattached
bcache device.

Changelog:
[mlyle: edited to not break string constants across lines]
v3: fix typos pointed out by Nix.
v2: change option values of stop_when_cache_set_failed from 1/0 to
    "auto"/"always".
v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1
    (always stop).
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Cc: Nix <nix@esperi.org.uk>
Cc: Pavel Goran <via-bcache@pvgoran.name>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When too many I/Os failed on cache device, bch_cache_set_error() is called
in the error handling code path to retire whole problematic cache set. If
new I/O requests continue to come and take refcount dc->count, the cache
set won't be retired immediately, this is a problem.

Further more, there are several kernel thread and self-armed kernel work
may still running after bch_cache_set_error() is called. It needs to wait
quite a while for them to stop, or they won't stop at all. They also
prevent the cache set from being retired.

The solution in this patch is, to add per cache set flag to disable I/O
request on this cache and all attached backing devices. Then new coming I/O
requests can be rejected in *_make_request() before taking refcount, kernel
threads and self-armed kernel worker can stop very fast when flags bit
CACHE_SET_IO_DISABLE is set.

Because bcache also do internal I/Os for writeback, garbage collection,
bucket allocation, journaling, this kind of I/O should be disabled after
bch_cache_set_error() is called. So closure_bio_submit() is modified to
check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set,
closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and
return, generic_make_request() won't be called.

A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit
from cache_set->flags, to disable or enable cache set I/O for debugging. It
is helpful to trigger more corner case issues for failed cache device.

Changelog
v4, add wait_for_kthread_stop(), and call it before exits writeback and gc
    kernel threads.
v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index.
    remove "bcache: " prefix when printing out kernel message.
v2, more changes by previous review,
- Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui.
- Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this
  is reported and inspired from origal patch of Pavel Vazharov.
v1, initial version.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Pavel Vazharov <freakpv@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

struct delayed_work writeback_rate_update in struct cache_dev is a delayed
worker to call function update_writeback_rate() in period (the interval is
defined by dc->writeback_rate_update_seconds).

When a metadate I/O error happens on cache device, bcache error handling
routine bch_cache_set_error() will call bch_cache_set_unregister() to
retire whole cache set. On the unregister code path, this delayed work is
stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update).

dc->writeback_rate_update is a special delayed work from others in bcache.
In its routine update_writeback_rate(), this delayed work is re-armed
itself. That means when cancel_delayed_work_sync() returns, this delayed
work can still be executed after several seconds defined by
dc->writeback_rate_update_seconds.

The problem is, after cancel_delayed_work_sync() returns, the cache set
unregister code path will continue and release memory of struct cache set.
Then the delayed work is scheduled to run, __update_writeback_rate()
will reference the already released cache_set memory, and trigger a NULL
pointer deference fault.

This patch introduces two more bcache device flags,
- BCACHE_DEV_WB_RUNNING
  bit set:  bcache device is in writeback mode and running, it is OK for
            dc->writeback_rate_update to re-arm itself.
  bit clear:bcache device is trying to stop dc->writeback_rate_update,
            this delayed work should not re-arm itself and quit.
- BCACHE_DEV_RATE_DW_RUNNING
  bit set:  routine update_writeback_rate() is executing.
  bit clear: routine update_writeback_rate() quits.

This patch also adds a function cancel_writeback_rate_update_dwork() to
wait for dc->writeback_rate_update quits before cancel it by calling
cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected
quit dc->writeback_rate_update, after time_out seconds this function will
give up and continue to call cancel_delayed_work_sync().

And here I explain how this patch stops self re-armed delayed work properly
with the above stuffs.

update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning
and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling
cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING.

Before calling cancel_delayed_work_sync() wait utill flag
BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling
cancel_delayed_work_sync(), dc->writeback_rate_update must be already re-
armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases
delayed work routine update_writeback_rate() won't be executed after
cancel_delayed_work_sync() returns.

Inside update_writeback_rate() before calling schedule_delayed_work(), flag
BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means
someone is about to stop the delayed work. Because flag
BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync()
has to wait for this flag to be cleared, we don't need to worry about race
condition here.

If update_writeback_rate() is scheduled to run after checking
BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync()
in cancel_writeback_rate_update_dwork(), it is also safe. Because at this
moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned
previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear
and quit immediately.

Because there are more dependences inside update_writeback_rate() to struct
cache_set memory, dc->writeback_rate_update is not a simple self re-arm
delayed work. After trying many different methods (e.g. hold dc->count, or
use locks), this is the only way I can find which works to properly stop
dc->writeback_rate_update delayed work.

Changelog:
v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING
    to bit index, for test_bit().
v2: Try to fix the race issue which is pointed out by Junhui.
v1: The initial version for review
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NJunhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

back-end device sdm has already attached a cache_set with ID
f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with
another cache set, and it returns with an error:
[root]# cd /sys/block/sdm/bcache
[root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach
-bash: echo: write error: Invalid argument

After that, execute a command to modify the label of bcache
device:
[root]# echo data_disk1 > label

Then we reboot the system, when the system power on, the back-end
device can not attach to cache_set, a messages show in the log:
Feb  5 12:05:52 ceph152 kernel: [922385.508498] bcache:
bch_cached_dev_attach() couldn't find uuid for sdm in set

In sysfs_attach(), dc->sb.set_uuid was assigned to the value
which input through sysfs, no matter whether it is success
or not in bch_cached_dev_attach(). For example, If the back-end
device has already attached to an cache set, bch_cached_dev_attach()
would fail, but dc->sb.set_uuid was changed. Then modify the
label of bcache device, it will call bch_write_bdev_super(),
which would write the dc->sb.set_uuid to the super block, so we
record a wrong cache set ID in the super block, after the system
reboot, the cache set couldn't find the uuid of the back-end
device, so the bcache device couldn't exist and use any more.

In this patch, we don't assigned cache set ID to dc->sb.set_uuid
in sysfs_attach() directly, but input it into bch_cached_dev_attach(),
and assigned dc->sb.set_uuid to the cache set ID after the back-end
device attached to the cache set successful.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Struct cache uses io_errors for two purposes,
- Error decay: when cache set error_decay is set, io_errors is used to
  generate a small piece of delay when I/O error happens.
- I/O errors counter: in order to generate big enough value for error
  decay, I/O errors counter value is stored by left shifting 20 bits (a.k.a
  IO_ERROR_SHIFT).

In function bch_count_io_errors(), if I/O errors counter reaches cache set
error limit, bch_cache_set_error() will be called to retire the whold cache
set. But current code is problematic when checking the error limit, see the
following code piece from bch_count_io_errors(),

 90     if (error) {
 91             char buf[BDEVNAME_SIZE];
 92             unsigned errors = atomic_add_return(1 << IO_ERROR_SHIFT,
 93                                                 &ca->io_errors);
 94             errors >>= IO_ERROR_SHIFT;
 95
 96             if (errors < ca->set->error_limit)
 97                     pr_err("%s: IO error on %s, recovering",
 98                            bdevname(ca->bdev, buf), m);
 99             else
100                     bch_cache_set_error(ca->set,
101                                         "%s: too many IO errors %s",
102                                         bdevname(ca->bdev, buf), m);
103     }

At line 94, errors is right shifting IO_ERROR_SHIFT bits, now it is real
errors counter to compare at line 96. But ca->set->error_limit is initia-
lized with an amplified value in bch_cache_set_alloc(),
1545         c->error_limit  = 8 << IO_ERROR_SHIFT;

It means by default, in bch_count_io_errors(), before 8<<20 errors happened
bch_cache_set_error() won't be called to retire the problematic cache
device. If the average request size is 64KB, it means bcache won't handle
failed device until 512GB data is requested. This is too large to be an I/O
threashold. So I believe the correct error limit should be much less.

This patch sets default cache set error limit to 8, then in
bch_count_io_errors() when errors counter reaches 8 (if it is default
value), function bch_cache_set_error() will be called to retire the whole
cache set. This patch also removes bits shifting when store or show
io_error_limit value via sysfs interface.

Nowadays most of SSDs handle internal flash failure automatically by LBA
address re-indirect mapping. If an I/O error can be observed by upper layer
code, it will be a notable error because that SSD can not re-indirect
map the problematic LBA address to an available flash block. This situation
indicates the whole SSD will be failed very soon. Therefore setting 8 as
the default io error limit value makes sense, it is enough for most of
cache devices.

Changelog:
v2: add reviewed-by from Hannes.
v1: initial version for review.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After long time small writing I/O running, we found the occupancy of CPU
is very high and I/O performance has been reduced by about half:

[root@ceph151 internal]# top
top - 15:51:05 up 1 day,2:43,  4 users,  load average: 16.89, 15.15, 16.53
Tasks: 2063 total,   4 running, 2059 sleeping,   0 stopped,   0 zombie
%Cpu(s):4.3 us, 17.1 sy 0.0 ni, 66.1 id, 12.0 wa,  0.0 hi,  0.5 si,  0.0 st
KiB Mem : 65450044 total, 24586420 free, 38909008 used,  1954616 buff/cache
KiB Swap: 65667068 total, 65667068 free,        0 used. 25136812 avail Mem

  PID USER PR NI    VIRT    RES    SHR S %CPU %MEM     TIME+ COMMAND
 2023 root 20  0       0      0      0 S 55.1  0.0   0:04.42 kworker/11:191
14126 root 20  0       0      0      0 S 42.9  0.0   0:08.72 kworker/10:3
 9292 root 20  0       0      0      0 S 30.4  0.0   1:10.99 kworker/6:1
 8553 ceph 20  0 4242492 1.805g  18804 S 30.0  2.9 410:07.04 ceph-osd
12287 root 20  0       0      0      0 S 26.7  0.0   0:28.13 kworker/7:85
31019 root 20  0       0      0      0 S 26.1  0.0   1:30.79 kworker/22:1
 1787 root 20  0       0      0      0 R 25.7  0.0   5:18.45 kworker/8:7
32169 root 20  0       0      0      0 S 14.5  0.0   1:01.92 kworker/23:1
21476 root 20  0       0      0      0 S 13.9  0.0   0:05.09 kworker/1:54
 2204 root 20  0       0      0      0 S 12.5  0.0   1:25.17 kworker/9:10
16994 root 20  0       0      0      0 S 12.2  0.0   0:06.27 kworker/5:106
15714 root 20  0       0      0      0 R 10.9  0.0   0:01.85 kworker/19:2
 9661 ceph 20  0 4246876 1.731g  18800 S 10.6  2.8 403:00.80 ceph-osd
11460 ceph 20  0 4164692 2.206g  18876 S 10.6  3.5 360:27.19 ceph-osd
 9960 root 20  0       0      0      0 S 10.2  0.0   0:02.75 kworker/2:139
11699 ceph 20  0 4169244 1.920g  18920 S 10.2  3.1 355:23.67 ceph-osd
 6843 ceph 20  0 4197632 1.810g  18900 S  9.6  2.9 380:08.30 ceph-osd

The kernel work consumed a lot of CPU, and I found they are running journal
work, The journal is reclaiming source and flush btree node with surprising
frequency.

Through further analysis, we found that in btree_flush_write(), we try to
get a btree node with the smallest fifo idex to flush by traverse all the
btree nodein c->bucket_hash, after we getting it, since no locker protects
it, this btree node may have been written to cache device by other works,
and if this occurred, we retry to traverse in c->bucket_hash and get
another btree node. When the problem occurrd, the retry times is very high,
and we consume a lot of CPU in looking for a appropriate btree node.

In this patch, we try to record 128 btree nodes with the smallest fifo idex
in heap, and pop one by one when we need to flush btree node. It greatly
reduces the time for the loop to find the appropriate BTREE node, and also
reduce the occupancy of CPU.

[note by mpl: this triggers a checkpatch error because of adjacent,
pre-existing style violations]
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Sometimes, Journal takes up a lot of CPU, we need statistics
to know what's the journal is doing. So this patch provide
some journal statistics:
1) reclaim: how many times the journal try to reclaim resource,
   usually the journal bucket or/and the pin are exhausted.
2) flush_write: how many times the journal try to flush btree node
   to cache device, usually the journal bucket are exhausted.
3) retry_flush_write: how many times the journal retry to flush
   the next btree node, usually the previous tree node have been
   flushed by other thread.
we show these statistic by sysfs interface. Through these statistics
We can totally see the status of journal module when the CPU is too
high.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Bcache only does recoverable I/O for read operations by calling
cached_dev_read_error(). For write opertions there is no I/O recovery for
failed requests.

But in bch_count_io_errors() no matter read or write I/Os, before errors
counter reaches io error limit, pr_err() always prints "IO error on %,
recoverying". For write requests this information is misleading, because
there is no I/O recovery at all.

This patch adds a parameter 'is_read' to bch_count_io_errors(), and only
prints "recovering" by pr_err() when the bio direction is READ.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Member devices of struct cache_set is used to reference all attached
bcache devices to this cache set. If it is treated as array of pointers,
size of devices[] is indicated by member nr_uuids of struct cache_set.

nr_uuids is calculated in drivers/md/super.c:bch_cache_set_alloc(),
	bucket_bytes(c) / sizeof(struct uuid_entry)
Bucket size is determined by user space tool "make-bcache", by default it
is 1024 sectors (defined in bcache-tools/make-bcache.c:main()). So default
nr_uuids value is 4096 from the above calculation.

Every time when bcache code iterates bcache devices of a cache set, all
the 4096 pointers are checked even only 1 bcache device is attached to the
cache set, that's a wast of time and unncessary.

This patch adds a member devices_max_used to struct cache_set. Its value
is 1 + the maximum used index of devices[] in a cache set. When iterating
all valid bcache devices of a cache set, use c->devices_max_used in
for-loop may reduce a lot of useless checking.

Personally, my motivation of this patch is not for performance, I use it
in bcache debugging, which helps me to narrow down the scape to check
valid bcached devices of a cache set.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the control system would wait for at least half a second, and there's
been no reqs hitting the backing disk for awhile: use an alternate mode
where we have at most one contiguous set of writebacks in flight at a
time. (But don't otherwise delay).  If front-end IO appears, it will
still be quick, as it will only have to contend with one real operation
in flight.  But otherwise, we'll be sending data to the backing disk as
quickly as it can accept it (with one op at a time).
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Acked-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Writeback keys are presently iterated and dispatched for writeback in
order of the logical block address on the backing device.  Multiple may
be, in parallel, read from the cache device and then written back
(especially when there are contiguous I/O).

However-- there was no guarantee with the existing code that the writes
would be issued in LBA order, as the reads from the cache device are
often re-ordered.  In turn, when writing back quickly, the backing disk
often has to seek backwards-- this slows writeback and increases
utilization.

This patch introduces an ordering mechanism that guarantees that the
original order of issue is maintained for the write portion of the I/O.
Performance for writeback is significantly improved when there are
multiple contiguous keys or high writeback rates.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Tested-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

in bch_debug_init(), ret is always 0, and the return value is useless,
change it to return 0 if be success after calling debugfs_create_dir(),
else return a non-zero value.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bucket_in_use is updated in gc thread which triggered by invalidating or
writing sectors_to_gc dirty data, It's a long interval. Therefore, when we
use it to compare with the threshold, it is often not timely, which leads
to inaccurate judgment and often results in bucket depletion.

We have send a patch before, by the means of updating bucket_in_use
periodically In gc thread, which Coly thought that would lead high
latency, In this patch, we add avail_nbuckets to record the count of
available buckets, and we calculate bucket_in_use when alloc or free
bucket in real time.

[edited by ML: eliminated some whitespace errors]
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable cached_dev.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The previous code artificially limited writeback rate to 1000000
blocks/second (NSEC_PER_MSEC), which is a rate that can be met on fast
hardware.  The rate limiting code works fine (though with decreased
precision) up to 3 orders of magnitude faster, so use NSEC_PER_SEC.

Additionally, ensure that uint32_t is used as a type for rate throughout
the rate management so that type checking/clamp_t can work properly.

bch_next_delay should be rewritten for increased precision and better
handling of high rates and long sleep periods, but this is adequate for
now.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reported-by: NColy Li <colyli@suse.de>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bcache uses a control system to attempt to keep the amount of dirty data
in cache at a user-configured level, while not responding excessively to
transients and variations in write rate.  Previously, the system was a
PD controller; but the output from it was integrated, turning the
Proportional term into an Integral term, and turning the Derivative term
into a crude Proportional term.  Performance of the controller has been
uneven in production, and it has tended to respond slowly, oscillate,
and overshoot.

This patch set replaces the current control system with an explicit PI
controller and tuning that should be correct for most hardware.  By
default, it attempts to write at a rate that would retire 1/40th of the
current excess blocks per second.  An integral term in turn works to
remove steady state errors.

IMO, this yields benefits in simplicity (removing weighted average
filtering, etc) and system performance.

Another small change is a tunable parameter is introduced to allow the
user to specify a minimum rate at which dirty blocks are retired.

There is a slight difference from earlier versions of the patch in
integral handling to prevent excessive negative integral windup.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

gc and write-back get raced (see the email "bcache get stucked" I sended
before):
gc thread                               write-back thread
|                                       |bch_writeback_thread()
|bch_gc_thread()                        |
|                                       |==>read_dirty()
|==>bch_btree_gc()                      |
|==>btree_root() //get btree root       |
|                //node write locker    |
|==>bch_btree_gc_root()                 |
|                                       |==>read_dirty_submit()
|                                       |==>write_dirty()
|                                       |==>continue_at(cl,
|                                       |               write_dirty_finish,
|                                       |               system_wq);
|                                       |==>write_dirty_finish()//excute
|                                       |               //in system_wq
|                                       |==>bch_btree_insert()
|                                       |==>bch_btree_map_leaf_nodes()
|                                       |==>__bch_btree_map_nodes()
|                                       |==>btree_root //try to get btree
|                                       |              //root node read
|                                       |              //lock
|                                       |-----stuck here
|==>bch_btree_set_root()
|==>bch_journal_meta()
|==>bch_journal()
|==>journal_try_write()
|==>journal_write_unlocked() //journal_full(&c->journal)
|                            //condition satisfied
|==>continue_at(cl, journal_write, system_wq); //try to excute
|                               //journal_write in system_wq
|                               //but work queue is excuting
|                               //write_dirty_finish()
|==>closure_sync(); //wait journal_write execute
|                   //over and wake up gc,
|-------------stuck here
|==>release root node write locker

This patch alloc a separate work-queue for write-back thread to avoid such
race.

(Commit log re-organized by Coly Li to pass checkpatch.pl checking)
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Acked-by: NColy Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>

The bcache driver has always accepted arbitrarily large bios and split
them internally.  Now that every driver must accept arbitrarily large
bios this code isn't nessecary anymore.

Cc: linux-bcache@vger.kernel.org
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: add more description in commit message]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Change-Id: I6abde52afe917633480caaf4e2518f42a816d886

Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

gc_gen was a temporary used to recalculate last_gc, but since we only need
bucket->last_gc when gc isn't running (gc_mark_valid = 1), we can just update
last_gc directly.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>