If cp_error is set, we should avoid all the infinite loop.
In f2fs_sync_file, there is a hole, and this patch fixes that.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

fs/f2fs/trace.c:19:12: sparse: symbol 'pids_lock' was not declared. Should it be static?
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch removes radix tree after finishing tracing IOs.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds spin_lock to cover radix tree operations in IO tracer.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds NAT/SIT entry informations.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In the normal case, the radix_tree_nodes are freed successfully.
But, when cp_error was detected, we should destroy them forcefully.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch removes wrongly called unlock_page.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We use kzalloc to allocate memory in __recover_inline_status, and use this
all-zero memory to check the inline date content of inode page by comparing
them. This is low effective and not needed, let's check inline date content
directly.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: make the code more neat]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch aligns the start block address of a file for direct io to the f2fs's
section size.

Some flash devices manage an over 4KB-sized page as a write unit, and if the
direct_io'ed data are written but not aligned to that unit, the performance can
be degraded due to the partial page copies.

Thus, since f2fs has a section that is well aligned to FTL units, we can align
the block address to the section size so that f2fs avoids this misalignment.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch removes unnecessary function calls.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch relocates some operations to avoid unnecessary execution.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch uses dn->data_blkaddr as a parameter for the destination block
address.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:

struct dir_inode_entry {
	struct list_head list;	/* list head */
	struct inode *inode;	/* vfs inode pointer */
};

struct inode_entry {
	struct list_head list;
	struct inode *inode;
};

It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Cleanup parameters for trace_f2fs_submit_{read_,write_,page_,page_m}bio with fio
as one parameter.
Suggested-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds missing parameter _type_ for trace_f2fs_submit_page_bio, then
use DECLARE_EVENT_CLASS/DEFINE_EVENT_CONDITION pair to cleanup some trace event
code related to f2fs_submit_page_{m,}bio.

Additionally, after we remove redundant code, size of code can be reduced:
   text    data     bss     dec     hex filename
 176787    8712      56  185555   2d4d3 f2fs.ko.org
 174408    8648      56  183112   2cb48 f2fs.ko
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In do_recover_data, we find and update previous node pages after updating
its new block addresses.
After then, we call fill_node_footer without reset field, we erase its
cold bit so that this new cold node block is written to wrong log area.
This patch fixes not to miss its old flag.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds block count by in-place-update in stat.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The __f2fs_add_link is covered by cp_rwsem all the time.
This calls init_inode_metadata, which conducts some acl operations including
memory allocation with GFP_KERNEL previously.
But, under memory pressure, f2fs_write_data_page can be called, which also
grabs cp_rwsem too.

In this case, this incurs a deadlock pointed by Chao.
Thread #1        Thread #2
 down_read
                 down_write
  down_read
 -> here down_read should wait forever.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch activates f2fs_trace_ios.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch activates f2fs_trace_pid.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds two key functions to trace process ids and IOs.
The basic idea is to
1. remain process ids, pids, in page->private.
2. show pids in IO traces.

So, later we can retrieve process information according to IO traces.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds:
 o initial trace.c and trace.h with skeleton functions
 o Kconfig and Makefile to activate this feature
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Use more common function ra_meta_pages() with META_POR to readahead node blocks
in restore_node_summary() instead of ra_sum_pages(), hence we can simplify the
readahead code there, and also we can remove unused function ra_sum_pages().

changes from v2:
 o use invalidate_mapping_pages as before suggested by Changman Lee.
changes from v1:
 o fix one bug when using truncate_inode_pages_range which is pointed out by
   Jaegeuk Kim.
Reviewed-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch moves one member of struct nat_entry: _flag_ to struct node_info,
so _version_ in struct node_info and _flag_ which are unsigned char type will
merge to one 32-bit space in register/memory. So the size of nat_entry will be
reduced from 28 bytes to 24 bytes (for 64-bit machine, reduce its size from 40
bytes to 32 bytes) and then slab memory using by f2fs will be reduced.

changes from v2:
 o update description of memory usage gain for 64-bit machine suggested by
   Changman Lee.
changes from v1:
 o introduce inline copy_node_info() to copy valid data from node info suggested
   by Jaegeuk Kim, it can avoid bug.
Reviewed-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.

Changes from v1
  o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch calls f2fs_kunmap_page which I missed before.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Now we use inmemory pages for atomic write only and provide abort procedure,
we don't need to truncate them explicitly.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The ckpt_valid_map and cur_valid_map are synced by seg_info_to_raw_sit.

In the case of small discards, the candidates are selected before sync,
while fitrim selects candidates after sync.

So, for small discards, we need to add candidates only just being obsoleted.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
 o f2fs_ioc_abort_volatile_write
  - If transaction was failed, all the grabbed pages and data should be written.
 o f2fs_ioc_release_volatile_write
  - This is to enhance the performance of PERSIST mode in sqlite.

In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to call lock_op and lock_page at the aborting path.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If there is not enough available memory, we need to trigger f2fs_sync_fs.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc.  The
clashing O_PATH value was added in commit 5229645b ("vfs: add
nonconflicting values for O_PATH") but this can't be changed as it is
user-visible.

FMODE_NONOTIFY is only used internally in the kernel, but it is in the
same numbering space as the other O_* flags, as indicated by the comment
at the top of include/uapi/asm-generic/fcntl.h (and its use in
fs/notify/fanotify/fanotify_user.c).  So renumber it to avoid the clash.

All of this has happened before (commit 12ed2e36: "fanotify:
FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will
happen again -- so update the uniqueness check in fcntl_init() to
include __FMODE_NONOTIFY.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_link(), the parent directory inode passed to function
ocfs2_lookup_ino_from_name() is wrong.  Parameter dir is the parent of
new_dentry not old_dentry.  We should get old_dir from old_dentry and
lookup old_dentry in old_dir in case another node remove the old dentry.

With this change, hard linking works again, when paths are relative with
at least one subdirectory.  This is how the problem was reproducable:

  # mkdir a
  # mkdir b
  # touch a/test
  # ln a/test b/test
  ln: failed to create hard link `b/test' => `a/test': No such file or  directory

However when creating links in the same dir, it worked well.

Now the link gets created.

Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()")
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Reported-by: NSzabo Aron - UBIT <aron@ubit.hu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Tested-by: NAron Szabo <aron@ubit.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_process_recovery_data, only when dlm_new_lock failed the ret will
be set to -ENOMEM.  And in this case, newlock is definitely NULL.  So
test newlock is meaningless, remove it.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJakub Wilk <jwilk@jwilk.net>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This reverts commit 14516bb7.

This was causing regression test failures with generic/285 with an ext3
filesystem using CONFIG_EXT4_USE_FOR_EXT23.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Prevent BUG or corrupted file systems after the following:

mkfs.ext4 /dev/vdc 100M
mount -t ext4 -o sb=40961 /dev/vdc /vdc
resize2fs /dev/vdc

We previously prevented online resizing using the old resize ioctl.
Move the code to ext4_resize_begin(), so the check applies for all of
the resize ioctl's.
Reported-by: NMaxim Malkov <malkov@ispras.ru>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In spite of different file type,
 if file is same name and same inode number, old inode cache is used.
This causes that you can not cd directory, can not cat SymbolicLink.
So this patch is that if file type is different, return error.

Reproducible sample :
1. create file 'a' at cifs client.
2. repeat rm and mkdir 'a' 4 times at server, then direcotry 'a' having same inode number is created.
   (Repeat 4 times, then same inode number is recycled.)
   (When server is under RHEL 6.6, 1 time is O.K.  Always same inode number is recycled.)
3. ls -li at client, then you can not cd directory, can not remove directory.

SymbolicLink has same problem.

Bug link:
https://bugzilla.kernel.org/show_bug.cgi?id=90011Signed-off-by: NNakajima Akira <nakajima.akira@nttcom.co.jp>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NSteve French <steve.french@primarydata.com>