- 11 9月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
This provides a connector property to enable/disable hdmi audio on the fly. The default is disabled, but you can select auto (let the driver detect an audio capable monitor and enable it) or enabled (force audio enabled). This also enables audio by default so you no longer need a module parameter to enable audio. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 31 8月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
Similar to DCE4/5, but supports multiple audio pins which can be assigned per afmt block. v2: rework the driver to handle more than one audio pin. v3: try different dto reg v4: properly program dto v5 (ck): change dto programming order v6: program speaker allocation block v7: rebase v8: rebase on Rafał's changes v9: integrated Rafał's comments, update to latest drm_edid_to_speaker_allocation API v10: add missing line break in error message v11: add back audio enabled messages v12: fix copy paste typo in r600_audio_enable Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NRafał Miłecki <zajec5@gmail.com>
-
- 27 6月, 2013 3 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The register bits changed on DCE8 compared to previous families. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 12 6月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
Mac laptops with multiple GPUs apparently use the gmux driver for backlight control. Don't register a radeon backlight interface. We may need to add other pci ids for other hybrid mac laptops. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=65377Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 03 6月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
It's not supported yet. Fixes display issues when users force it on. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 24 4月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
Register audio callbacks for asic where we support audio. Cleans up the code and makes it easier to add support for newer asics. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 12月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
Need to use the adjusted mode since we are sending native timing and using the scaler for non-native modes. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> cc: stable@vger.kernel.org
-
- 15 11月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=50431Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
-
- 23 10月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
In cases where we have multiple radeons with backlight controls. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=48941Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 27 9月, 2012 2 次提交
-
-
由 Alex Deucher 提交于
Restore the backlight level on resume. Some systems need to explicitly restore the backlight level on resume. Fixes panel resume on my Trinity laptop and may fix the following bugs: https://bugs.freedesktop.org/show_bug.cgi?id=43829 https://bugzilla.kernel.org/show_bug.cgi?id=46241Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Read back the backlight level from the hw. Needed for proper backlight restoration on resume. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 21 9月, 2012 8 次提交
-
-
由 Alex Deucher 提交于
comparing the encoder mode to the encoder id for DVO. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Makes it more consistent with the surrounding code. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Use the proper struct in the union. That field has the same offset in every struct, so no functional change. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lauri Kasanen 提交于
Let's allow GCC to optimize better. This exposed some five unused functions, but this patch doesn't remove them. Signed-off-by: NLauri Kasanen <cand@gmx.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Several encoder setup functions had the same duplicated code for selecting the proper bpc setting for various atom tables. Consolidate it. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This cleans up the interface a bit as well. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Luca Tettamanti 提交于
Set up an handler for ACPI events and respond to brightness change requests from the system BIOS. v2: fix notification when using device-specific command codes (tested by Pali Rohár <pali.rohar@gmail.com>); cache the encoder controlling the backlight during the initialization to avoid searching it every time (suggested by Alex Deucher). v3: whitespace fixes (Alex Deucher). Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
On systems that use the build in GPU backlight controller, we can use atom tables to change the brightness level. v2: use firmware flags Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 8月, 2012 2 次提交
-
-
由 Alex Deucher 提交于
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 25 7月, 2012 1 次提交
-
-
由 Jerome Glisse 提交于
The external encoder need to be setup again before enabling the transmiter. This seems to be only needed on some trinity/aruba to fix dpms on. v2: Add comment, only setup again on dce6 ie aruba or newer. Cc: <stable@kernel.org> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 7月, 2012 1 次提交
-
-
由 Laurent Pinchart 提交于
The passed mode must not be modified by the operation, make it const. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 6月, 2012 1 次提交
-
-
由 Rafał Miłecki 提交于
After recent changes HDMI code is ready to be enabled on DCE5. This patch just changes conditions to execute already present code on DCE5. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NChristian König <christian.koenig@amd.com> Tested-by: NAndre Heider <a.heider@gmail.com> Tested-by: NZoltán Böszörményi <zboszor@pr.hu> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 17 5月, 2012 1 次提交
-
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 13 5月, 2012 1 次提交
-
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 24 4月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
Improve handling of bpc (bits per color) in radeon. In most cases we want 8 except for HDMI, DP, LVDS, and eDP. v2: handle DP better. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 10 4月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
Some r4xx chips have the wrong frev in the DVOEncoderControl table. It should always be 1 on r4xx. Fixes modesetting on DVO on r4xx chips with the bad frev. Reported by twied on #radeon. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 26 3月, 2012 1 次提交
-
-
由 Alex Deucher 提交于
Using the bpc (bits per color) specified by the monitor can cause problems in some cases. Until we get a better handle on how to deal with those cases, just use a bpc of 8. Reported-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 3月, 2012 3 次提交
-
-
由 Alex Deucher 提交于
TN (trinity) uses DP bridges for LVDS and VGA just like llano. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 25 1月, 2012 4 次提交
-
-
由 Alex Deucher 提交于
HDMI 1.3 defines single link clocks up to 340 Mhz. Refine the current dual link checks to only enable dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the hw supports HDMI 1.3 (DCE3+). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We were previously just checking for audio. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
dig transmitter control table only has ENABLE/DISABLE actions on DCE4.1/DCE5. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44955Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needs to happen earlier in the mode set. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 12月, 2011 1 次提交
-
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-