s/hignbank/highbank/
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Remove the platform static mapping code for uart and use the common
debug_ll_io_init function.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Remove the platform static mapping code for uart and use the common
debug_ll_io_init function.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

And initial Calxeda ECX-2000 SOC support. This adds Cortex-A15 peripherals
and machine DT match name.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

In preparation for A15 support on ECX-2000, the direct calls to SCU
registers must be conditional. The SCU power mode register is replaced by
a custom register on ECX-2000.

Rather than read the number of cores from the SCU, just hardcode it to 4.
This removes one use of SCU and removes the need for the SCU to be
statically mapped. The cpu initialization will ultimately come from DT.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Some highbank DMA masters can support coherent (ACP) or non-coherent DMA.
This sets up dma_map_ops for masters which are configured for coherent DMA.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>

Being a module_init call, highbank_pm_init will cause problem with
multi-platform build running on other platforms.  Call it from
.init_machine instead.
Reported-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Convert the highbank platform to use struct smp_operations to provide
its SMP and CPU hotplug operations.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This adds real clock support to Calxeda Highbank SOC using the common
clock infrastructure.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
[mturquette@linaro.org: fixed up invalid writes to const struct member]
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Linux runs in non-secure mode on highbank, so we need secure monitor calls
to enable and disable the PL310. Rather than invent new smc calls, the same
calling convention used by OMAP is used here.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add support for the new smp_twd runtime registration interface
to the highbank platforms, and remove the old compile-time support.

The highbank DTS file is updated to match the TWD DT documentation
and fixes the timer trigger (rising edge).
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Initialize sched_clock to use the sp804 timer.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

irqs.h is optional now for SPARSE_IRQ, so select it and remove mach/irqs.h
from highbank.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

It turns out that the logical CPU mapping is useful even when !CONFIG_SMP
for manipulation of devices like interrupt and power controllers when
running a UP kernel on a CPU other than 0. This can happen when kexecing
a UP image from an SMP kernel.

In the future, multi-cluster systems running AMP configurations will
require something similar for mapping cluster IDs, so it makes sense to
decouple this logic in preparation for this support.
Acked-by: NYang Bai <hamo.by@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reported-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

BSYM macro is only needed for assembly files and its usage in c files is
wrong, so remove it. The linker will correctly set bit 0 for Thumb2
kernels.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NDave Martin <dave.martin@linaro.org>

Hook these platforms restart code into the new restart hook rather
than using arch_reset().
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch uses the new cpu_logical_map() macro for converting logical
CPU numbers into physical numbers when releasing CPUs during the SMP
boot and CPU hotplug paths.
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Convert the highbank platform to be using the gic_handle_irq
function as its primary interrupt handler.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This adds basic support for the Calxeda Highbank platform.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NShawn Guo <shawn.guo@linaro.org>