- 18 9月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
- Pass the user namespace the uid and gid values in the xattr are stored in into posix_acl_from_xattr. - Pass the user namespace kuid and kgid values should be converted into when storing uid and gid values in an xattr in posix_acl_to_xattr. - Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to pass in &init_user_ns. In the short term this change is not strictly needed but it makes the code clearer. In the longer term this change is necessary to be able to mount filesystems outside of the initial user namespace that natively store posix acls in the linux xattr format. Cc: Theodore Tso <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 01 8月, 2012 6 次提交
-
-
由 Mel Gorman 提交于
GFP_NOFS is _more_ permissive than GFP_NOIO in that it will initiate IO, just not of any filesystem data. The problem is that previously NOFS was correct because that avoids recursion into the NFS code. With swap-over-NFS, it is no longer correct as swap IO can lead to this recursion. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Implement the new swapfile a_ops for NFS and hook up ->direct_IO. This will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol ->connect() method. PF_MEMALLOC should allow the allocation of struct socket and related objects and the early (re)setting of SOCK_MEMALLOC should allow us to receive the packets required for the TCP connection buildup. [jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases] [dfeng@redhat.com: Fix handling of multiple swap files] [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
The VM does not like PG_private set on PG_swapcache pages. As suggested by Trond in http://lkml.org/lkml/2006/8/25/348, this patch disables NFS data cache revalidation on swap files. as it does not make sense to have other clients change the file while it is being used as swap. This avoids setting PG_private on swap pages, since there ought to be no further races with invalidate_inode_pages2() to deal with. Since we cannot set PG_private we cannot use page->private which is already used by PG_swapcache pages to store the nfs_page. Thus augment the new nfs_page_find_request logic. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Replace all relevant occurences of page->index and page->mapping in the NFS client with the new page_file_index() and page_file_mapping() functions. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Layton 提交于
We have no mechanism to emulate LOCK_MAND locks on NFSv4, so explicitly return -EINVAL if someone requests it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 NeilBrown 提交于
By default a sunrpc service is limited to (N+3)*20 connections where N is the number of threads. This is 80 when N==1. If this number is exceeded a warning is printed suggesting that the number of threads be increased. However with services which run a single thread, this is impossible. For such services there is a ->sv_maxconn setting that can be used to forcibly increase the limit, and silence the message. This is used by lockd. The nfs client uses a sunrpc service to handle callbacks and it too is single-threaded, so to avoid the useless messages, and to allow a reasonable number of concurrent connections, we need to set ->sv_maxconn. 1024 seems like a good number. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 7月, 2012 17 次提交
-
-
由 Bryan Schumaker 提交于
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch exports symbols and moves over the final structures needed by the v3 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set. The module (nfs3.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v3. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The module (nfs2.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v2. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Otherwise we break backwards compatibility when v4 becomes a modules. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Somehow I missed this in my previous patch series, but these functions are only needed by the v4 code and should be moved to a v4-only file. I wasn't exactly sure where I should put these functions, so I moved them into nfs4super.c where I could make them static. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I can set all variables in the nfs_fill_super() function, allowing me to remove the nfs4_fill_super() function. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to initialize the ACL client only when we are using v3. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have easy access to rpc_ops that used to be difficult to reach. This allows me to set up a different mount path for NFS v2/3 and NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I can now share this code with the v2 and v3 code by using the NFS subversion structure. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch adds in the code to track multiple versions of the NFS protocol. I created default structures for v2, v3 and v4 so that each version can continue to work while I convert them into kernel modules. I also removed the const parameter from the rpc_version array so that I can change it at runtime. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 David Howells 提交于
Fix a number of bugs in the NFS idmapper code: (1) Only registered key types can be passed to the core keys code, so register the legacy idmapper key type. This is a requirement because the unregister function cleans up keys belonging to that key type so that there aren't dangling pointers to the module left behind - including the key->type pointer. (2) Rename the legacy key type. You can't have two key types with the same name, and (1) would otherwise require that. (3) complete_request_key() must be called in the error path of nfs_idmap_legacy_upcall(). (4) There is one idmap struct for each nfs_client struct. This means that idmap->idmap_key_cons is shared without the use of a lock. This is a problem because key_instantiate_and_link() - as called indirectly by idmap_pipe_downcall() - releases anyone waiting for the key to be instantiated. What happens is that idmap_pipe_downcall() running in the rpc.idmapd thread, releases the NFS filesystem in whatever thread that is running in to continue. This may then make another idmapper call, overwriting idmap_key_cons before idmap_pipe_downcall() gets the chance to call complete_request_key(). I *think* that reading idmap_key_cons only once, before key_instantiate_and_link() is called, and then caching the result in a variable is sufficient. Bug (4) is the cause of: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 0 Oops: 0010 [#1] SMP CPU 1 Modules linked in: ppdev parport_pc lp parport ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack nfs fscache xt_CHECKSUM auth_rpcgss iptable_mangle nfs_acl bridge stp llc lockd be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi snd_hda_codec_realtek snd_usb_audio snd_hda_intel snd_hda_codec snd_seq snd_pcm snd_hwdep snd_usbmidi_lib snd_rawmidi snd_timer uvcvideo videobuf2_core videodev media videobuf2_vmalloc snd_seq_device videobuf2_memops e1000e vhost_net iTCO_wdt joydev coretemp snd soundcore macvtap macvlan i2c_i801 snd_page_alloc tun iTCO_vendor_support microcode kvm_intel kvm sunrpc hid_logitech_dj usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan] Pid: 1229, comm: rpc.idmapd Not tainted 3.4.2-1.fc16.x86_64 #1 Gateway DX4710-UB801A/G33M05G1 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff8801a3645d40 EFLAGS: 00010246 RAX: ffff880077707e30 RBX: ffff880077707f50 RCX: ffff8801a18ccd80 RDX: 0000000000000006 RSI: ffff8801a3645e75 RDI: ffff880077707f50 RBP: ffff8801a3645d88 R08: ffff8801a430f9c0 R09: ffff8801a3645db0 R10: 000000000000000a R11: 0000000000000246 R12: ffff8801a18ccd80 R13: ffff8801a3645e75 R14: ffff8801a430f9c0 R15: 0000000000000006 FS: 00007fb6fb51a700(0000) GS:ffff8801afc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a49b0000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rpc.idmapd (pid: 1229, threadinfo ffff8801a3644000, task ffff8801a3bf9710) Stack: ffffffff81260878 ffff8801a3645db0 ffff8801a3645db0 ffff880077707a90 ffff880077707f50 ffff8801a18ccd80 0000000000000006 ffff8801a3645e75 ffff8801a430f9c0 ffff8801a3645dd8 ffffffff81260983 ffff8801a3645de8 Call Trace: [<ffffffff81260878>] ? __key_instantiate_and_link+0x58/0x100 [<ffffffff81260983>] key_instantiate_and_link+0x63/0xa0 [<ffffffffa057062b>] idmap_pipe_downcall+0x1cb/0x1e0 [nfs] [<ffffffffa0107f57>] rpc_pipe_write+0x67/0x90 [sunrpc] [<ffffffff8117f833>] vfs_write+0xb3/0x180 [<ffffffff8117fb5a>] sys_write+0x4a/0x90 [<ffffffff81600329>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff8801a3645d40> CR2: 0000000000000000 Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NSteve Dickson <steved@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 3.4]
-
由 Jeff Layton 提交于
We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
由 Peng Tao 提交于
Current block layout driver read/write code assumes page aligned IO in many places. Add a checker to validate the assumption. Otherwise there would be data corruption like when application does open(O_WRONLY) and page unaliged write. Signed-off-by: NPeng Tao <tao.peng@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
fl_type is not a bitmap. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Commit 57208fa7 "NFS: Create an write_pageio_init() function" did not modify the calls in direct.c, preventing direct io from using pnfs. This reintroduces that capability. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Commit 1abb5088 "NFS: Create an read_pageio_init() function" did not modify the call in direct.c, preventing direct io from using pnfs. This reintroduces that capability. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Randy Dunlap 提交于
Fix numerous repeated warnings by making the stub function void instead of non-void: fs/nfs/nfs4_fs.h: In function 'nfs4_unregister_sysctl': fs/nfs/nfs4_fs.h:385:1: warning: no return statement in function returning non-void Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 7月, 2012 1 次提交
-
-
由 Stanislav Kinsbursky 提交于
This is a cleanup patch - makes code looks simplier. It replaces widely used rqstp->rq_xprt->xpt_net by introduced SVC_NET(rqstp). Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 20 7月, 2012 2 次提交
-
-
由 Boaz Harrosh 提交于
It is very common for the end of the file to be unaligned on stripe size. But since we know it's beyond file's end then the XOR should be preformed with all zeros. Old code used to just read zeros out of the OSD devices, which is a great waist. But what scares me more about this situation is that, we now have pages attached to the file's mapping that are beyond i_size. I don't like the kind of bugs this calls for. Fix both birds, by returning a global zero_page, if offset is beyond i_size. TODO: Change the API to ->__r4w_get_page() so a NULL can be returned without being considered as error, since XOR API treats NULL entries as zero_pages. [Bug since 3.2. Should apply the same way to all Kernels since] CC: Stable Tree <stable@kernel.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
[Bug since 3.2 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
- 18 7月, 2012 13 次提交
-
-
由 Bryan Schumaker 提交于
... yet. Right now, init_nfs() is calling this function if an error is encountered when loading the nfs module. An __exit function can't be called from one declared as __init. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
These functions are only needed by NFS v4, so they can be moved into a v4 specific file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This allows me to move the v4 mounting and unmounting functions out of the generic client and into a file that is only compiled when CONFIG_NFS_V4 is enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
v2 and v3 shared a function for this, but v4 implemented something only slightly different. Might as well share code whenever possible... Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
These functions are specific to NFS v4 and can be moved to nfs4client.c to keep them out of the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And split these functions out of the generic client into a v4 specific file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch moves the NFS v4 file functions into a new file that is only compiled when CONFIG_NFS_V4 is enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And split them out of the generic client into their own file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I want to initialize all of NFS v4 in a single function that will eventually be used as the v4 module init function. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The NFS v4 file inode operations are already already in nfs4proc.c, so this patch just needs to move the directory operations to the same file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch moves the NFS v3 file and directory inode functions into files that are only compiled whet CONFIG_NFS_V3 is enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch moves the NFS v2 file and directory inode functions into files that are only compiled whet CONFIG_NFS_V2 is enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-