Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We want this for btrfs_extent_same. Basically readpage and friends do their
own extent locking but for the purposes of dedupe, we want to have both
files locked down across a set of readpage operations (so that we can
compare data). Introduce this variant and a flag which can be set for
extent_read_full_page() to indicate that we are already locked.

Partial credit for this patch goes to Gabriel de Perthuis <g2p.code@gmail.com>
as I have included a fix from him to the original patch which avoids a
deadlock on compressed extents.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This patch removes the io_tree argument for extent_clear_unlock_delalloc since
we always use &BTRFS_I(inode)->io_tree, and it separates out the extent tree
operations from the page operations.  This way we just pass in the extent bits
we want to clear and then pass in the operations we want done to the pages.
This is because I'm going to fix what extent bits we clear in some cases and
rather than add a bunch of new flags we'll just use the actual extent bits we
want to clear.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Before applying this patch, we cached the csum value into the extent state
tree when reading some data from the disk, this operation increased the lock
contention of the state tree.

Now, we just store the csum value into the bio structure or other unshared
structure, so we can reduce the lock contention.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We always just try and reserve data space when we write, but if we are out of
space but have prealloc'ed extents we should still successfully write.  This
patch will try and see if we can write to prealloc'ed space and if we can go
ahead and allow the write to continue.  With this patch we now pass xfstests
generic/274.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Btrfs has been pointer tagging bi_private and using bi_bdev
to store the stripe index and mirror number of failed IOs.

As bios bubble back up through the call chain, we use these
to decide if and how to retry our IOs.  They are also used
to count IO failures on a per device basis.

Recently a bio tracepoint was added lead to crashes because
we were abusing bi_bdev.

This commit adds a btrfs bioset, and creates explicit fields
for the mirror number and stripe index.  The plan is to
extend this structure for all of the fields currently in
struct btrfs_bio, which will mean one less kmalloc in
our IO path.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Reported-by: NTejun Heo <tj@kernel.org>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

It's unused since 0b32f4bb.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.

removed functions:

btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()

btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.

ulist.c functions are left, another patch will take care of those.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Clean up the leak debugging in extent_io.c by moving
the debug code into functions.  This also removes the
list_heads used for debugging from the extent_buffer
and extent_state structures when debug is not enabled.

Since we need a global debug config to do that last
part, implement CONFIG_BTRFS_DEBUG to accommodate.

Thanks to Dave Sterba for the Kconfig bit.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We can just look up the extent_buffers for the range and free stuff that way.
This makes the cleanup a bit cleaner and we can make sure to evict the
extent_buffers pretty quickly by marking them as stale.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

It is very likely that there are several blocks in bio, it is very
inefficient if we get their csums one by one. This patch improves
this problem by getting the csums in batch.

According to the result of the following test, the execute time of
__btrfs_lookup_bio_sums() is down by ~28%(300us -> 217us).

 # dd if=<mnt>/file of=/dev/null bs=1M count=1024
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Btrfs uses page_mkwrite to ensure stable pages during
crc calculations and mmap workloads.  We call clear_page_dirty_for_io
before we do any crcs, and this forces any application with the file
mapped to wait for the crc to finish before it is allowed to change
the file.

With compression on, the clear_page_dirty_for_io step is happening after
we've compressed the pages.  This means the applications might be
changing the pages while we are compressing them, and some of those
modifications might not hit the disk.

This commit adds the clear_page_dirty_for_io before compression starts
and makes sure to redirty the page if we have to fallback to
uncompressed IO as well.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Reported-by: NAlexandre Oliva <oliva@gnu.org>
cc: stable@vger.kernel.org

The nodesize is capped at 64k and there are enough pages preallocated in
extent_buffer::inline_pages. The fallback to kmalloc never happened
because even on the smallest page size considered (4k) inline_pages
covered the needs.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Nobody uses these io tree ops anymore so just remove them and clean up the code
a bit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We'll want to merge writes so they can fill a full RAID[56] stripe, but
not necessarily reads.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is required for the device replace procedure in a later step.
Two calling functions also had to be changed to have the fs_info
pointer: repair_io_failure() and scrub_setup_recheck_block().
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When building btrfs from kernel code, it will report:

	fs/btrfs/extent_io.h:281: warning: 'extent_buffer_page' declared inline after being called
	fs/btrfs/extent_io.h:281: warning: previous declaration of 'extent_buffer_page' was here
	fs/btrfs/extent_io.h:280: warning: 'num_extent_pages' declared inline after being called
	fs/btrfs/extent_io.h:280: warning: previous declaration of 'num_extent_pages' was here

because of the wrong declaration of inline functions.
Signed-off-by: NRobin Dong <sanbai@taobao.com>

Everytime we write out dirty pages we search for an offset in the tree,
convert the bits in the state, and then when we wait we search for the
offset again and clear the bits.  So for every dirty range in the io tree we
are doing 4 rb searches, which is suboptimal.  With this patch we are only
doing 2 searches for every cycle (modulo weird things happening).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

There are a coule scenarios where farming metadata csumming off to an async
thread doesn't help.  The first is if our processor supports crc32c, in
which case the csumming will be fast and so the overhead of the async model
is not worth the cost.  The other case is for our tree log.  We will be
making that stuff dirty and writing it out and waiting for it immediately.
Even with software crc32c this gives me a ~15% increase in speed with O_SYNC
workloads.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We're going to use this flag EXTENT_DEFRAG to indicate which range
belongs to defragment so that we can implement snapshow-aware defrag:

We set the EXTENT_DEFRAG flag when dirtying the extents that need
defragmented, so later on writeback thread can differentiate between
normal writeback and writeback started by defragmentation.
Original-Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

We noticed that the ordered extent completion doesn't really rely on having
a page and that it could be done independantly of ending the writeback on a
page.  This patch makes us not do the threaded endio stuff for normal
buffered writes and direct writes so we can end page writeback as soon as
possible (in irq context) and only start threads to do the ordered work when
it is actually done.  Compression needs to be reworked some to take
advantage of this as well, but atm it has to do a find_get_page in its endio
handler so it must be done in its own thread.  This makes direct writes
quite a bit faster.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The tree modification log needs two ways to create dummy extent buffers,
once by allocating a fresh one (to rebuild an old root) and once by
cloning an existing one (to make private rewind modifications) to it.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

A user reported a panic where we were trying to fix a bad mirror but the
mirror number we were giving was 0, which is invalid.  This is because we
don't do the transid verification until after the read, so as far as the
read code is concerned the read was a success.  So instead store the mirror
we read from so that if there is some failure post read we know which mirror
to try next and which mirror needs to be fixed if we find a good copy of the
block.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Since we need to read and write extent buffers in their entirety we can't use
the normal bio_readpage_error stuff since it only works on a per page basis.  So
instead make it so that if we see an io error in endio we just mark the eb as
having an IO error and then in btree_read_extent_buffer_pages we will manually
try other mirrors and then overwrite the bad mirror if we find a good copy.
This works with larger than page size blocks.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch simplifies how we track our extent buffers.  Previously we could exit
writepages with only having written half of an extent buffer, which meant we had
to track the state of the pages and the state of the extent buffers differently.
Now we only read in entire extent buffers and write out entire extent buffers,
this allows us to simply set bits in our bflags to indicate the state of the eb
and we no longer have to do things like track uptodate with our iotree.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Because btrfs cow's we can end up with extent buffers that are no longer
necessary just sitting around in memory.  So instead of evicting these pages, we
could end up evicting things we actually care about.  Thus we have
free_extent_buffer_stale for use when we are freeing tree blocks.  This will
make it so that the ref for the eb being in the radix tree is dropped as soon as
possible and then is freed when the refcount hits 0 instead of waiting to be
released by releasepage.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We spend a lot of time looking up extent buffers from pages when we could just
store the pointer to the eb the page is associated with in page->private.  This
patch does just that, and it makes things a little simpler and reduces a bit of
CPU overhead involved with doing metadata IO.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

A few years ago the btrfs code to support blocks lager than
the page size was disabled to fix a few corner cases in the
page cache handling.  This fixes the code to properly support
large metadata blocks again.

Since current kernels will crash early and often with larger
metadata blocks, this adds an incompat bit so that older kernels
can't mount it.

This also does away with different blocksizes for nodes and leaves.
You get a single block size for all tree blocks.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

 set_extent_bit can do exclusive locking but only when called by lock_extent*,

 Drop the exclusive bits argument except when called by lock_extent.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

 lock_extent and unlock_extent are always called with GFP_NOFS, drop the
 argument and use GFP_NOFS consistently.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>

 We encountered an issue that was easily observable on s/390 systems but
 could really happen anywhere. The timing just seemed to hit reliably
 on s/390 with limited memory.

 The gist is that when an unexpected set_page_dirty() happened, we'd
 run into the BUG() in btrfs_writepage_fixup_worker since it wasn't
 properly set up for delalloc.

 This patch does the following:
 - Performs the missing delalloc in the fixup worker
 - Allow the start hook to return -EBUSY which informs __extent_writepage
   that it should mark the page skipped and not to redirty it. This is
   required since the fixup worker can fail with -ENOSPC and the page
   will have already been redirtied. That causes an Oops in
   drop_outstanding_extents later. Retrying the fixup worker could
   lead to an infinite loop. Deferring the page redirty also saves us
   some cycles since the page would be stuck in a resubmit-redirty loop
   until the fixup worker completes. It's not harmful, just wasteful.
 - If the fixup worker fails, we mark the page and mapping as errored,
   and end the writeback, similar to what we would do had the page
   actually been submitted to writeback.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

This patch adds the possibilty to read-lock an extent even if it is already
write-locked from the same thread. btrfs_find_all_roots() needs this
capability.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

My previous patch introduced some u64 for failed_mirror variables, this one
makes it consistent again.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

write_cache_pages tries to build up a large bio to stuff down the pipe.
But if it needs to wait for a page lock, it needs to make sure and send
down any pending writes so we don't deadlock with anyone who has the
page lock and is waiting for writeback of things inside the bio.

Dave Sterba triggered this as a deadlock between the autodefrag code and
the extent write_cache_pages
Signed-off-by: NChris Mason <chris.mason@oracle.com>

While looking for a performance regression a user was complaining about, I
noticed that we had a regression with the varmail test of filebench.  This was
introduced by

0d10ee2e

which keeps us from calling writepages in writepage.  This is a correct change,
however it happens to help the varmail test because we write out in larger
chunks.  This is largly to do with how we write out dirty pages for each
transaction.  If you run filebench with

load varmail
set $dir=/mnt/btrfs-test
run 60

prior to this patch you would get ~1420 ops/second, but with the patch you get
~1200 ops/second.  This is a 16% decrease.  So since we know the range of dirty
pages we want to write out, don't write out in one page chunks, write out in
ranges.  So to do this we call filemap_fdatawrite_range() on the range of bytes.
Then we convert the DIRTY extents to NEED_WAIT extents.  When we then call
btrfs_wait_marked_extents() we only have to filemap_fdatawait_range() on that
range and clear the NEED_WAIT extents.  This doesn't get us back to our original
speeds, but I've been seeing ~1380 ops/second, which is a <5% regression as
opposed to a >15% regression.  That is acceptable given that the original commit
greatly reduces our latency to begin with.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

If I have a range where I know a certain bit is and I want to set it to another
bit the only option I have is to call set and then clear bit, which will result
in 2 tree searches.  This is inefficient, so introduce convert_extent_bit which
will go through and set the bit I want and clear the old bit I don't want.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Add a READAHEAD extent buffer flag.
Add a function to trigger a read with this flag set.

Changes v2:
 - use extent buffer flags instead of extent state flags

Changes v5:
 - adapt to changed read_extent_buffer_pages interface
 - don't return eb from reada_tree_block_flagged if it has CORRUPT flag set
Signed-off-by: NArne Jansen <sensille@gmx.net>

read_extent_buffer_pages currently has two modes, either trigger a read
without waiting for anything, or wait for the I/O to finish. The former
also bails when it's unable to lock the page. This patch now adds an
additional parameter to allow it to block on page lock, but don't wait
for completion.

Changes v5:
 - merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and
   WAIT_PAGE_LOCK

Change v6:
 - fix bug introduced in v5
Signed-off-by: NArne Jansen <sensille@gmx.net>