- 06 1月, 2011 2 次提交
-
-
由 Yauhen Kharuzhy 提交于
S3C2443 has two-bits pull-up/pull-down configuration fields in GPIO registers, but values are differ from other SoCs with two-bits configuration. gpio-cfg-helpers.h already has prototypes for s3c2443-style pull-up/down methods, so implement them. Signed-off-by: NYauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yauhen Kharuzhy 提交于
Samsung S3C2416 has two SDHCI controllers compatible with other Samsung's SoCs (S3C64XX, S5PC100 etc...). Add required platform setup code that the devices can be used with sdhci-s3c driver. Signed-off-by: NYauhen Kharuzhy <yauhen.kharuzhy@promwad.com> [kgene.kim@samsung.com: change to __raw_{readl,writel} from {readl,writel}] [kgene.kim@samsung.com: build error fixes] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 30 12月, 2010 6 次提交
-
-
由 Sylwester Nawrocki 提交于
There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds samsung_gpiolib_add_2bit_chips() for cleanup regarding GPIOlib adding 2bit chips. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Changhwan Youn 提交于
This patch adds support Power Domain for S5PV310 and S5PC210. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Changhwan Youn 提交于
This patch implements Power Domain control based on Runtime PM framework. Each Power Domain is represented by a Power Domain device and the devices belong to these Power Domains should be set as a child device of the Power Domain devices. The corresponding drivers of the devices should implement Runtime PM to control the Power Domains. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Begin converting Samsung platforms over to these methods by converting s3c_irqext_wake() with a simple textual substitution. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Rajeshwari Shinde 提交于
Segregate I2S devices for S5P6440 and S5P6450. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 08 12月, 2010 1 次提交
-
-
由 Vasily Khoruzhick 提交于
Currently the {set,get}_pull callbacks of the s3c24xx_gpiocfg_default structure are initalized via s3c_gpio_{get,set}pull_1up. This results in a linker error when only CONFIG_CPU_S3C2442 is selected: arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f4): undefined reference to `s3c_gpio_getpull_1up' arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f8): undefined reference to `s3c_gpio_setpull_1up' The s3c2442 has pulldowns instead of pullups compared to the s3c2440. The method of controlling them is the same though. So this patch modifies the existing s3c_gpio_{get,set}pull_1up helper functions to take an additional parameter deciding whether the pin has a pullup or pulldown. The s3c_gpio_{get,set}pull_1{down,up} functions then wrap that functions passing either S3C_GPIO_PULL_UP or S3C_GPIO_PULL_DOWN. Furthermore this patch sets up the s3c24xx_gpiocfg_default.{get,set}_pull fields in the s3c244{0,2}_map_io function to the new pulldown helper functions. Based on patch from "Lars-Peter Clausen" <lars@metafoo.de> Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 19 11月, 2010 2 次提交
-
-
由 Jassi Brar 提交于
Define platform devices for all audio devices found on S5PV310 Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jassi Brar 提交于
Add new defined and data structures in order to prepare for new I2S driver. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 26 10月, 2010 1 次提交
-
-
由 Daein Moon 提交于
This patch adds the s3c_gpio_getpull() API that has been missed in the plat-samsung/gpio-config.c and actullay there is its extern declaration in plat/gpio-cfg.h. Signed-off-by: NDaein Moon <moon9124@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 25 10月, 2010 6 次提交
-
-
由 Kukjin Kim 提交于
This patch moves the start address of Samsung SoCs' VA space so that can use more vmalloc()/ioremap() space. Of course need to change the VMALLOC_END for it. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PC100. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jeongbae Seo 提交于
This patch adds clock types into platform data to support external clock divider instead of internal clock divider. It is defined that what kinds of clock type is used in machine. Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds initialization HSMMC device information. And HSMMC platform data like card detect, data bus width and capability is configured. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NJeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 23 10月, 2010 3 次提交
-
-
由 Ben Dooks 提交于
A number of the SDHCI code configure a GPIO to a special function and remove any pull-up, so add s3c_gpio_cfgrange_nopull() as a wrapper to the s3c_gpio_cfgall_range() to make the code that calls it fit on one line. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ben Dooks 提交于
Add a function to configure a range of GPIOs function and pull in one go, mainly for the SDHCI and framebuffer helpers which tend to do this. Signed-off-by: NBen Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fix small comments] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ben Dooks 提交于
Add s3c_gpio_cfgpin_range() to configure a range of pins to the given value. This is useful for a number of blocks where the pins are in order and saves multiple calls to s3c_gpio_cfgpin(). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 10月, 2010 2 次提交
-
-
由 Joonyoung Shim 提交于
This patch adds a common callback for gpio_to_irq() for external and gpio interrupts for Samsung SoCs. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: moved samsung_gpiolib_to_irq() for s3c24xx build] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds common code to enable support of GPIO interrupt on S5P SoCs. The total number of GPIO pins is quite large on S5P SoCs. Registering irq support for all of them would be a resource waste. Because of that the interrupt support for standard GPIO pins is registered dynamically by the s5p_register_gpio_interrupt() function. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 10月, 2010 6 次提交
-
-
由 Atul Dahiya 提交于
This patch replaces the device name assignment method from string assignment to set_name method for all s3c24xx machines and adds device core file. Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Abhilash Kesavan 提交于
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the arch directory. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Kukjin Kim 提交于
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
-
- 29 9月, 2010 1 次提交
-
-
由 Jassi Brar 提交于
Newer SoCs have the SPI clock scaling control in platform's clock management unit. Inorder for such SoCs to work, we need to check the flag clk_from_cmu before making any clock changes. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 14 9月, 2010 1 次提交
-
-
由 Kukjin Kim 提交于
This patch fixes on defined drive strength value for GPIO. According to data sheet, if we want drive strength 1x, the value should be 00(b), if 2x should be 10(b), if 3x should be 01(b), and if 4x should be 11(b). Also fixes comment(from S5C to S5P). Reported-by: NJanghyuck Kim <janghyuck.kim@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 8月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 11 8月, 2010 8 次提交
-
-
由 Pawel Osciak 提交于
S5PV210 SoCs allow enabling/disabling DMA channels per window. For a window to display data from framebuffer memory, its channel has to be enabled. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
S5PV210 allows per-window locking of register value updates from shadow registers. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Add VSYNC interrupt support and an ioctl that allows waiting for it. Interrupts are turned on only when needed. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Supports all bpp modes. The PRTCON register is used to disable in-hardware updates of registers that store start and end addresses of framebuffer memory. This prevents display corruption in case we do not make it before VSYNC with updating them atomically. With this feature there is no need to wait for a VSYNC interrupt before each such update. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Add framebuffer device name initialization calls for S3C2443, S3C64xx and S5P machines. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
FRAMESEL1 bitfield starts on 13th bit, not on 14th. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Cc: InKi Dae <inki.dae@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Remove the palette setup code from the header files and put it into the main driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Update the variant and window variant structures with the necessary changes to support the older style of hardware where these are not in the same place. Add the support for the s3c2443/s3c2416 hardware by using the platform-device s3c2443 to cover both, and add the initialisation data for these. Also change to including just the v4 header files for the moment until the last of the merging of these is sorted out. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-