Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 01 5月, 2013 5 次提交
  3. 30 4月, 2013 1 次提交
  5. 03 4月, 2013 1 次提交
  7. 27 3月, 2013 1 次提交
    • E
      ipc: Restrict mounting the mqueue filesystem · a636b702
      由 Eric W. Biederman 提交于 
      Only allow mounting the mqueue filesystem if the caller has CAP_SYS_ADMIN
rights over the ipc namespace.   The principle here is if you create
or have capabilities over it you can mount it, otherwise you get to live
with what other people have mounted.

This information is not particularly sensitive and mqueue essentially
only reports which posix messages queues exist.  Still when creating a
restricted environment for an application to live any extra
information may be of use to someone with sufficient creativity.  The
historical if imperfect way this information has been restricted has
been not to allow mounts and restricting this to ipc namespace
creators maintains the spirit of the historical restriction.

Cc: stable@vger.kernel.org
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      a636b702
  9. 23 3月, 2013 1 次提交
    • V
      mqueue: sys_mq_open: do not call mnt_drop_write() if read-only · 38d78e58
      由 Vladimir Davydov 提交于 
      mnt_drop_write() must be called only if mnt_want_write() succeeded,
otherwise the mnt_writers counter will diverge.

mnt_writers counters are used to check if remounting FS as read-only is
OK, so after an extra mnt_drop_write() call, it would be impossible to
remount mqueue FS as read-only.  Besides, on umount a warning would be
printed like this one:

  =====================================
  [ BUG: bad unlock balance detected! ]
  3.9.0-rc3 #5 Not tainted
  -------------------------------------
  a.out/12486 is trying to release lock (sb_writers) at:
  mnt_drop_write+0x1f/0x30
  but there are no more locks to release!
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      38d78e58
  11. 09 3月, 2013 2 次提交
  13. 06 3月, 2013 1 次提交
  15. 04 3月, 2013 3 次提交
  17. 28 2月, 2013 1 次提交
  19. 24 2月, 2013 2 次提交
  21. 23 2月, 2013 2 次提交
  23. 28 1月, 2013 1 次提交
  25. 05 1月, 2013 9 次提交
  27. 15 12月, 2012 1 次提交
    • E
      userns: Require CAP_SYS_ADMIN for most uses of setns. · 5e4a0847
      由 Eric W. Biederman 提交于 
      Andy Lutomirski <luto@amacapital.net> found a nasty little bug in
the permissions of setns.  With unprivileged user namespaces it
became possible to create new namespaces without privilege.

However the setns calls were relaxed to only require CAP_SYS_ADMIN in
the user nameapce of the targed namespace.

Which made the following nasty sequence possible.

pid = clone(CLONE_NEWUSER | CLONE_NEWNS);
if (pid == 0) { /* child */
	system("mount --bind /home/me/passwd /etc/passwd");
}
else if (pid != 0) { /* parent */
	char path[PATH_MAX];
	snprintf(path, sizeof(path), "/proc/%u/ns/mnt");
	fd = open(path, O_RDONLY);
	setns(fd, 0);
	system("su -");
}

Prevent this possibility by requiring CAP_SYS_ADMIN
in the current user namespace when joing all but the user namespace.
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      5e4a0847
  29. 12 12月, 2012 1 次提交
    • A
      mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB · 42d7395f
      由 Andi Kleen 提交于 
      There was some desire in large applications using MAP_HUGETLB or
SHM_HUGETLB to use 1GB huge pages on some mappings, and stay with 2MB on
others.  This is useful together with NUMA policy: use 2MB interleaving
on some mappings, but 1GB on local mappings.

This patch extends the IPC/SHM syscall interfaces slightly to allow
specifying the page size.

It borrows some upper bits in the existing flag arguments and allows
encoding the log of the desired page size in addition to the *_HUGETLB
flag.  When 0 is specified the default size is used, this makes the
change fully compatible.

Extending the internal hugetlb code to handle this is straight forward.
Instead of a single mount it just keeps an array of them and selects the
right mount based on the specified page size.  When no page size is
specified it uses the mount of the default page size.

The change is not visible in /proc/mounts because internal mounts don't
appear there.  It also has very little overhead: the additional mounts
just consume a super block, but not more memory when not used.

I also exported the new flags to the user headers (they were previously
under __KERNEL__).  Right now only symbols for x86 and some other
architecture for 1GB and 2MB are defined.  The interface should already
work for all other architectures though.  Only architectures that define
multiple hugetlb sizes actually need it (that is currently x86, tile,
powerpc).  However tile and powerpc have user configurable hugetlb
sizes, so it's not easy to add defines.  A program on those
architectures would need to query sysfs and use the appropiate log2.

[akpm@linux-foundation.org: cleanups]
[rientjes@google.com: fix build]
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      42d7395f
  31. 20 11月, 2012 3 次提交
  33. 13 10月, 2012 2 次提交
    • J
      audit: make audit_inode take struct filename · adb5c247
      由 Jeff Layton 提交于 
      Keep a pointer to the audit_names "slot" in struct filename.

Have all of the audit_inode callers pass a struct filename ponter to
audit_inode instead of a string pointer. If the aname field is already
populated, then we can skip walking the list altogether and just use it
directly.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      adb5c247
    • J
      vfs: define struct filename and have getname() return it · 91a27b2a
      由 Jeff Layton 提交于 
      getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.

For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.

This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.

Later, we'll add other information to the struct as it becomes
convenient.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      91a27b2a
  35. 12 10月, 2012 1 次提交
    • J
      audit: set the name_len in audit_inode for parent lookups · bfcec708
      由 Jeff Layton 提交于 
      Currently, this gets set mostly by happenstance when we call into
audit_inode_child. While that might be a little more efficient, it seems
wrong. If the syscall ends up failing before audit_inode_child ever gets
called, then you'll have an audit_names record that shows the full path
but has the parent inode info attached.

Fix this by passing in a parent flag when we call audit_inode that gets
set to the value of LOOKUP_PARENT. We can then fix up the pathname for
the audit entry correctly from the get-go.

While we're at it, clean up the no-op macro for audit_inode in the
!CONFIG_AUDITSYSCALL case.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      bfcec708
  37. 09 10月, 2012 1 次提交
  39. 27 9月, 2012 1 次提交