- 05 7月, 2011 11 次提交
-
-
由 Axel Lin 提交于
Base on Mark's comment [1], I make the Kconfig entry invisible to users. [1] https://lkml.org/lkml/2011/5/14/136Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Axel Lin 提交于
Fix below build error: CC drivers/mfd/tps65911-comparator.o drivers/mfd/tps65911-comparator.c: In function 'tps65911_comparator_probe': drivers/mfd/tps65911-comparator.c:131: error: 'struct tps65910_platform_data' has no member named 'vmbch_threshold' drivers/mfd/tps65911-comparator.c:137: error: 'struct tps65910_platform_data' has no member named 'vmbch2_threshold' make[2]: *** [drivers/mfd/tps65911-comparator.o] Error 1 make[1]: *** [drivers/mfd] Error 2 make: *** [drivers] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Keshava Munegowda 提交于
This reverts commit 7e6502d5. Oops are produced during initialization of ehci and ohci drivers. This is because the run time pm apis are used by the driver but the corresponding hwmod structures and initialization is not merged. hence revering back the commit id 7e6502d5Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com> Reported-by: NLuciano Coelho <coelho@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Samuel Ortiz 提交于
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Samuel Ortiz 提交于
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (277 commits) [SCSI] isci: fix checkpatch errors isci: Device reset should request sas_phy_reset(phy, true) isci: pare back error messsages isci: cleanup silicon revision detection isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.h isci: merge sata.[ch] into request.c isci: kill 'get/set' macros isci: retire scic_sds_ and scic_ prefixes isci: unify isci_host and scic_sds_controller isci: unify isci_remote_device and scic_sds_remote_device isci: unify isci_port and scic_sds_port isci: fix scic_sds_remote_device_terminate_requests isci: unify isci_phy and scic_sds_phy isci: unify isci_request and scic_sds_request isci: rename / clean up scic_sds_stp_request isci: preallocate requests isci: combine request flags isci: unify can_queue tracking on the tci_pool, uplevel tag assignment isci: Terminate dev requests on FIS err bit rx in NCQ isci: fix frame received locking ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc由 Linus Torvalds 提交于
* 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc: AT91: Change nand buswidth logic to match hardware default configuration at91: Use "pclk" as con_id on at91cap9 and at91rm9200 at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl atmel_serial: fix internal port num at91: fix at91_set_serial_console: use platform device id
-
由 Linus Torvalds 提交于
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x: vesafb: fix memory leak fbdev: amba: Link fb device to its parent fsl-diu-fb: remove check for pixel clock ranges udlfb: Correct sub-optimal resolution selection. hecubafb: add module_put on error path in hecubafb_probe() sm501fb: fix section mismatch warning gx1fb: Fix section mismatch warnings fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma plane
-
由 Goldwyn Rodrigues 提交于
Commits 71c29bd5 ("IB/uverbs: Add devnode method to set path/mode") and c3af0980 ("IB: Add devnode methods to cm_class and umad_class") added devnode methods that set the mode. However, these methods don't check for a NULL mode, and so we get a crash when unloading modules because devtmpfs_delete_node() calls device_get_devnode() with mode == NULL. Add the missing checks. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de> [ Also fix cm.c. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Ferre 提交于
The recently modified nand buswitth configuration is not aligned with board reality: the double footprint on boards is always populated with 8bits buswidth nand flashes. So we have to consider that without particular configuration the 8bits buswidth is selected by default. Moreover, the previous logic was always using !board_have_nand_8bit(), we change it to a simpler: board_have_nand_16bit(). Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 04 7月, 2011 6 次提交
-
-
由 Daniel J Blueman 提交于
When releasing framebuffer, free colourmap allocations. Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Update documentation regarding driver removal PM: Documentation: fix typo: pm_runtime_idle_sync() doesn't exist.
-
由 James Bottomley 提交于
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: set socket send and receive timeouts before attempting connect
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (k10temp) Update documentation for Fam12h hwmon-vid: Fix typo in VIA CPU name hwmon: (f71882fg) Add support for the F71869A hwmon: Use <> rather than () around my e-mail address hwmon: (emc6w201) Properly handle all errors
-
- 03 7月, 2011 23 次提交
-
-
由 Clemens Ladisch 提交于
Add some CPU series IDs and links to the Fam12h datasheets. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
It's Nehemiah, not Nemiah. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Hans de Goede 提交于
The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Tested-by: NMax Baldwin <archerseven@gmail.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Handle errors on 8-bit register reads and writes too. Also use likely and unlikely to make the functions faster on success. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jeff Skirvin 提交于
The hard_reset parameter passed to the LLDD in the direct-attached phy control case allows the LLDD to filter link failure events while the direct-attached device reset is executing. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The messages emitted from task.c and some from request.c likely duplicate (in a less undertandable way) what is reported by the midlayer. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Perform checking per-pci device (even though all systems will only have 1 pci device in this generation), and delete support for silicon that does not report a proper revision (i.e. A0). Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Does not need its own file. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Undo some needless separation. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Most of these simple dereference macros are longer than their open coded equivalent. Deleting enum sci_controller_mode is thrown in for good measure. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The distinction between scic_sds_ scic_ and sci_ are no longer relevant so just unify the prefixes on sci_. The distinction between isci_ and sci_ is historically significant, and useful for comparing the old 'core' to the current Linux driver. 'sci_' represents the former core as well as the routines that are closer to the hardware and protocol than their 'isci_' brethren. sci == sas controller interface. Also unwind the 'sds1' out of the parameter structs. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove the distinction between these two implementations and unify on isci_host (local instances named ihost). Hmmm, we had two 'oem_parameters' instances, one was unused... nice. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove the distinction between these two implementations and unify on isci_remote_device (local instances named idev). Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove the distinction between these two implementations and unify on isci_port (local instances named iport). The duplicate '->owning_port' and '->isci_port' in both isci_phy and isci_remote_device will be fixed in a later patch... this is just the straightforward rename/unification. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Commit 0815632 "isci: unify remote_device stop_handlers" introduced the possibility that not all requests get terminated if we reach the request_count. Now that we properly reference count devices we don't need this self-defense and can do the straightforward scan of all active requests. Reported-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Acked-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
They are one in the same object so remove the distinction. The near duplicate fields (owning_port, and isci_port) will be cleaned up after the scic_sds_port isci_port unification. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
They are one in the same object so remove the distinction. The near duplicate fields (owning_controller, and isci_host) will be cleaned up after the scic_sds_contoller isci_host unification. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
* Rename scic_sds_stp_request to isci_stp_request * Remove the unused fields and union indirection Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
the dma_pool interface is optimized for object_size << page_size which is not the case with isci_request objects and the dma_pool routines show up in the top of the profile. The old io_request_table which tracked whether tci slots were in-flight or not is replaced with an IREQ_ACTIVE flag per request. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Combine three bools into one unsigned long 'flags'. Doesn't increase the request size due to packing. (to do: optimize the structure layout). Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The tci_pool tracks our outstanding command slots which are also the 'index' portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure. ->was_tag_assigned_by_user required the task context to be duplicated in request-local buffer. With the tci established early we can build the task_context directly into its final location and skip a memcpy. With the task context buffer at a known address at request construction we have the opportunity/obligation to also fix sgl handling. This rework feels like it belongs in another patch but the sgl handling and task_context are too intertwined. 1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in the task context (previously we were prematurely linking to the staging buffer). 2/ fix the broken iteration of pio sgls that assumes all sgls are relative to the request, and does a dangerous looking reverse lookup of physical address to virtual address. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jeff Skirvin 提交于
When the remote device transitions to a not-ready state because of an NCQ error condition, all outstanding requests to that device are terminated and completed to libsas on the normal path. The device then waits for a READ LOG EXT command to issue on the task management path. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-