Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing
errors:

[791759.606542] usb 1-5.4: input irq status -75 received
[791759.614537] usb 1-5.4: input irq status -75 received
[791759.622542] usb 1-5.4: input irq status -75 received

Add it.
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device exists with two device IDs instead of one as previously
believed.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

During a stress test these mice kept dropping and reappearing
in runlevel 1 as opposed to 5.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse is also known under other IDs. It needs the quirk or will disconnect
in runlevel 1 or 3.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse needs QUIRK_ALWAYS_POLL.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device disconnects every 60s without X
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Based on a patch from: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com>

Most of the tablets handled by hid-uclogic already use MULTI_INPUT.
For the ones which are not quirked in usbhid/hidquirks, they have a
custom report descriptor which contains only one report per HID
interface. For those tablets HID_QUIRK_MULTI_INPUT is transparent.

According to https://github.com/DIGImend/tablets, the only problematic
tablet currently handled by hid-uclogic is the TWHA60 v3. This tablet
presents different report descriptors from the ones currently quirked.
This is not a problem per se, given that this tablet is not supported
currently in this version (it needs the same command as a Huion to
start forwarding events).
Reviewed-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by
default. This patch replaces it with a corrected one.
Signed-off-by: NMilan Plzik <milan.plzik@gmail.com>
Reviewed-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Based on code for the US Surface Type Cover 3
from commit be3b1634
("HID: add support for MS Surface Pro 3 Type Cover"):
Signed-off-by: NAlan Wu <alan.c.wu@gmail.com>
Tested-by: NKarlis Dreizis <karlisdreizis@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

New Genius MousePen i608X devices have a new id 0x501a instead of the
old 0x5011 so add a new #define with "_2" appended and change required
places.

The remaining two checkpatch warnings about line length
being over 80 characters are present in the original files too and this
patch was made in the same style (no line break).

Just adding a new id and changing the required places should make the
new device work without any issues according to the bug report in the
following url.

This patch was made according to and fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=67111Signed-off-by: NGiedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The touchscreen needs the same quirk as the other models.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Reported-by: NBryan Poling <poli0048@umn.edu>
CC: stable@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Surface Pro 3 Type Cover that works with Ubuntu (and possibly Arch) from this thread. Both trackpad and keyboard work after compiling my own kernel.
http://ubuntuforums.org/showthread.php?t=2231207&page=2&s=44910e0c56047e4f93dfd9fea58121ef

Also includes Jarrad Whitaker's message which sources
http://winaero.com/blog/how-to-install-linux-on-surface-pro-3/
which he says is sourced from a Russian site
Signed-off-by: NAlan Wu <alan.c.wu@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Yet another device that needs this quirk.
Reported-by: NTanguy de Baritault <tdebaritault@gmail.com>
Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device needs the quirk as well.
Tested-by: NKevin Fenzi <kevin@scrye.com>
Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device needs the quirk as well.
Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is a second mouse sharing the same vendor strings but different IDs.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Enable the always-poll quirk for Elan Touchscreens found on some recent
Samsung laptops.

Without this quirk the device keeps disconnecting from the bus (and is
re-enumerated) unless opened (and kept open, should an input event
occur).

Note that while the device can be run-time suspended, the autosuspend
timeout must be high enough to allow the device to be polled at least
once before being suspended. Specifically, using autosuspend_delay_ms=0
will still cause the device to disconnect on input events.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events instead of ABS_X and
ABS_Y.
Signed-off-by: NWen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error
when I plugin it.  and I need to wait for 10s for this device to be ready.

By adding this quirks, the usb keyborad is usable right after plugin
Signed-off-by: NWangzhao Cai <microcaicai@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events instead of ABS_X and
ABS_Y.
Signed-off-by: NWen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This driver adds support for USB controlled led panels that exists in
MSI GT683R laptop
Signed-off-by: NJanne Kanniainen <janne.kanniainen@gmail.com>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

These device needs to be added to the quirks list with HID_QUIRK_NOGET,
otherwise they will reset upon receiving the get input report requests.
Signed-off-by: NJohn Sung <penmount.touch@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID
1a2c:0023 does not seem to be handling the reports initialization very well.
This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel
when connected, and a delay before its initialization.  This patch adds the
quirk for this device, which causes the delay to disappear.

[jkosina@suse.cz: remove superfluous comment and fix ordering]
Signed-off-by: NDaniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This touchpad seriously dislikes init reports, not only timeing out, but
also refusing to work after this.

Cc: stable@vger.kernel.org
Reported-and-tested-by: NVincent Fortier <th0ma7@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is timeout error during initialization:
kernel: [   11.733104] hid-multitouch 0003:1870:0110.0001: usb_submit_urb(ctrl) failed: -1
kernel: [   11.734093] hid-multitouch 0003:1870:0110.0001: timeout initializing reports

Adding quirk HID_QUIRK_NO_INIT_REPORTS can solve the problem.
Signed-off-by: NYufeng Shen <miletus@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

[jkosina@suse.cz: refresh to apply after SIS quirk merging]
Signed-off-by: NEmanuel Krenz <emanuelkrenz@web.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add Synaptics HD touchscreen(06cb:1ac3) to no init report quirk
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add Synaptics HD touchscreen(06cb:0ac3) to no init report quirk.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

USB_VENDOR_ID_SIS and USB_VENDOR_ID_SIS2_TOUCH are identical,
so refine the code and merge the quirks.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for SiS multitouch panels.
Signed-off-by: NForest Bond <forest.bond@rapidrollout.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BugLink: http://bugs.launchpad.net/bugs/1180881

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

[12431.828467] hid-multitouch 0003:0457:1013.0475: usb_submit_urb(ctrl) failed: -1
[12431.828507] hid-multitouch 0003:0457:1013.0475: timeout initializing reports
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BugLink: http://bugs.launchpad.net/bugs/1180881

Synaptics large touchscreen doesn't support some of the report request
while initializing. The unspoorted request will make the device unreachable,
and will lead to the following usb_submit_urb() function call timeout.
So, add the IDs into HID_QUIRK_NO_INIT_REPORTS quirk.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The DuoSense touchscreen device causes a 10 second timeout. This fix
removes the delay.
Signed-off-by: NVasily Titskiy <qehgt0@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix build problem caused by typo introduced by 620ae90e
("HID: usbhid: quirk for MSI GX680R led panel").

Reported-by: fengguang.wu@intel.com
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This keyboard backlight device causes a 10 second delay to boot.  Add it
to the quirk list with HID_QUIRK_NO_INIT_REPORTS.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver
[IR605A/Q] to hid-ids.h and hid-quirks.c.  This IR receiver causes about a 10
second timeout when the usbhid driver attempts to initialze the device.  Adding
this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the
delay.
Signed-off-by: NNicholas Santos <nicholas.santos@gmail.com>
[jkosina@suse.cz: fix ordering]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The USB recovery mode present in i.MX23 ROM emulates USB HID.  It needs this
quirk to behave properly.

Even if the official branding of the chip is Freescale i.MX23, I named it
Sigmatel STMP3780 since that's what the chip really is and it even reports
itself as STMP3780.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support to Novatec wireless mouse (device ID 0603:1602).
Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031Signed-off-by: NMarco Biscaro <marcobiscaro2112@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>