When rework early cow of pinned hugetlb pages, we moved huge_ptep_get()
upper but overlooked a side effect that the huge_ptep_get() will fetch the
pte after wr-protection.  After moving it upwards, we need explicit
wr-protect of child pte or we will keep the write bit set in the child
process, which could cause data corrution where the child can write to the
original page directly.

This issue can also be exposed by "memfd_test hugetlbfs" kselftest.

Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com
Fixes: 4eae4efa ("hugetlb: do early cow when page pinned on src mm")
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.

Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).

Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages.  Patch 2 addresses that.

After this series applied, "memfd_test hugetlbfs" should start to pass.

This patch (of 2):

F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.

$ ./memfd_test hugetlbfs
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
mmap() didn't fail as expected
Aborted (core dumped)

I think it's probably because no one is really running the hugetlbfs test.

Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we
do in shmem_mmap().  Generalize a helper for that.

Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com
Fixes: ab3948f5 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reported-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arm64 fixes from Catalin Marinas:
 "Fixes and cpucaps.h automatic generation:

   - Generate cpucaps.h at build time rather than carrying lots of
     #defines. Merged at -rc1 to avoid some conflicts during the merge
     window.

   - Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
     out of reset and the IRG instruction would not function as expected
     if only the architected pseudorandom number generator is
     implemented.

   - Fix potential race condition in __sync_icache_dcache() where the
     PG_dcache_clean page flag is set before the actual cache
     maintenance.

   - Fix header include in BTI kselftests"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
  arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
  arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
  kselftest/arm64: Add missing stddef.h include to BTI tests
  arm64: Generate cpucaps.h

Pull f2fs fixes from Jaegeuk Kim:
 "This fixes some critical bugs such as memory leak in compression
  flows, kernel panic when handling errors, and swapon failure due to
  newly added condition check"

* tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: return EINVAL for hole cases in swap file
  f2fs: avoid swapon failure by giving a warning first
  f2fs: compress: fix to assign cc.cluster_idx correctly
  f2fs: compress: fix race condition of overwrite vs truncate
  f2fs: compress: fix to free compress page correctly
  f2fs: support iflag change given the mask
  f2fs: avoid null pointer access when handling IPU error

Pull drm fixes from Dave Airlie:
 "Not much here, mostly amdgpu fixes, with a couple of radeon, and a
  cosmetic vc4.

  Two MAINTAINERS file updates also.

  amdgpu:
   - Fixes for flexible array conversions
   - Fix sysfs attribute init
   - Harvesting fixes
   - VCN CG/PG fixes for Picasso

  radeon:
   - Fixes for flexible array conversions
   - Fix for flickering on Oland with multiple 4K displays

  vc4:
   - drop unused function"

* tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
  drm/amdgpu: set vcn mgcg flag for picasso
  drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
  drm/amdgpu: update the method for harvest IP for specific SKU
  drm/amdgpu: add judgement when add ip blocks (v2)
  drm/amd/display: Initialize attribute for hdcp_srm sysfs file
  drm/amd/pm: Fix out-of-bounds bug
  drm/radeon/si_dpm: Fix SMU power state load
  drm/radeon/ni_dpm: Fix booting bug
  MAINTAINERS: Update address for Emma Anholt
  MAINTAINERS: Update my e-mail
  drm/vc4: remove unused function
  drm/ttm: Do not add non-system domain BO into swap list

To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.

When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.

Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.comSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.13-2021-05-13:

amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso

radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com

Remove an unused function and a MAINTAINERS update.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix

Pull power management fixes from Rafael Wysocki:
 "These close a coverage gap in the intel_pstate driver and fix runtime
  PM child count imbalance related to interactions with system-wide
  suspend.

  Specifics:

   - Make intel_pstate work as expected on systems where the platform
     firmware enables HWP even though the HWP EPP support is not
     advertised (Rafael Wysocki).

   - Fix possible runtime PM child count imbalance that may occur if
     other runtime PM functions are called after invoking
     pm_runtime_force_suspend() and before pm_runtime_force_resume()
     is called (Tony Lindgren)"

* tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Fix unpaired parent child_count for force_resume
  cpufreq: intel_pstate: Use HWP if enabled by platform firmware

Pull ACPI fixes from Rafael Wysocki:
 "These revert an unnecessary revert of an ACPI power management commit,
  add a missing device ID to one of the lists and fix a possible memory
  leak in an error path.

  Specifics:

   - Revert a revert of a recent ACPI power management change that does
     not need to be reverted after all (Rafael Wysocki).

   - Add missing fan device ID to the list of device IDs for which the
     devices should not be put into the ACPI PM domain (Sumeet
     Pawnikar).

   - Fix possible memory leak in an error path in the ACPI device
     enumeration code (Christophe JAILLET)"

* tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Add ACPI ID of Alder Lake Fan
  ACPI: scan: Fix a memory leak in an error handling path
  Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""

* acpi-pm:
  ACPI: PM: Add ACPI ID of Alder Lake Fan
  Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""

* pm-core:
  PM: runtime: Fix unpaired parent child_count for force_resume

Merge VT_RESIZEX fixes from Maciej Rozycki:
 "I got to the bottom of the issue with VT_RESIZEX recently discussed
  and came up with this small patch series, fixing an additional issue
  that I originally thought might be broken VGA hardware emulation with
  my laptop, which however turned out to be intertwined with the
  original problem and also a regression introduced somewhat later.

  The fix for that because the first patch, and then to make backporting
  feasible I had to put a revert of the offending change from last
  September next, followed by a proper fix for the framebuffer issue
  that change had tried to address.

  See individual change descriptions for details.

  These have been verified with true VGA hardware (a Trident TVGA8900
  ISA video adapter) using various combinations of `svgatextmode' and
  `setfont' command invocations to change both the VT size and the font
  size, and also switching between the text console and X11, both by
  starting/stopping the X server and by switching between VTs.

  All this to ensure bringing the behaviour of VGA text console back to
  correct operation as it used to be with Linux 2.6.18"

* emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>:
  vt: Fix character height handling with VT_RESIZEX
  vt_ioctl: Revert VT_RESIZEX parameter handling removal
  vgacon: Record video mode changes with VT_RESIZEX

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763 ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3Signed-off-by: NMaciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.

As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank.  The proportions change according to
text mode geometries chosen.

Revert the change verbatim then, bringing back previous VT resizing.
Signed-off-by: NMaciej W. Rozycki <macro@orcam.me.uk>
Fixes: 988d0763 ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: NMaciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ
  drivers, plus a minor cleanup in the corsair-psu driver"

* tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adm9240) Fix writes into inX_max attributes
  hwmon: (ltc2992) Put fwnode in error case during ->probe()
  hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding
  hwmon: (occ) Fix poll rate limiting
  hwmon: (corsair-psu) Remove unneeded semicolons

Anshuman suggested this.
Suggested-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210513151819.12526-1-broonie@kernel.orgSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com>

update suspend register settings in Non-DPG mode.
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

enable vcn mgcg flag for picasso.
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).

The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.

So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).

v2:
 - Only apply the fix to Oland.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Update the method of disabling VCN IP for specific SKU for navi1x ASIC,
it will judge whether should add the related IP at the function of
amdgpu_device_ip_block_add().
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Judgement whether to add an sw ip according to the harvest info.

v2: fix indentation (Alex)
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)

Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:

    BUG: key ffff9248900cd148 has not been registered!

Fixes: 9037246b ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586Reported-by: NMikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: NDavid Ward <david.ward@gatech.edu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that accesses
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/amd/pm/powerplay/si_dpm.c:
4820: table->initialState.levels[0].mclk.vDLL_CNTL =
4821:         cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
5021: table->ACPIState.levels[0].mclk.vDLL_CNTL =
5022:         cpu_to_be32(dll_cntl);

because such element cannot be accessed without previously allocating
enough dynamic memory for it to exist (which never actually happens).
So, there is an out-of-bounds bug in this case.

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 0e1aa13c ("drm/amd/pm: Replace one-element array with
flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Fixes: 0e1aa13c ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

4353         table->initialState.levels[0].mclk.vDLL_CNTL =
4354                 cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
4555         table->ACPIState.levels[0].mclk.vDLL_CNTL =
4556                 cpu_to_be32(dll_cntl);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 96e27e8d ("drm/radeon/si_dpm: Replace one-element array
with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1583
Fixes: 96e27e8d ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct NISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/radeon/ni_dpm.c:
1690         table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL =
1691                 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl);
...
1903:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl);
1904:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct NISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element
array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the
size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to
be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/
Fixes: 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: NChristian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: NChristian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When converting the driver to use the devm_hwmon_device_register_with_info
API, the wrong register was selected when writing into inX_max attributes.
Fix it.

Fixes: 124b7e34 ("hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info API")
Reported-by: NChris Packham <Chris.Packham@alliedtelesis.co.nz>
Tested-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Pull documentation fixes from Jonathan Corbet:
 "A set of straightforward documentation fixes"

* tag 'docs-5.13-3' of git://git.lwn.net/linux:
  Remove link to nonexistent rocket driver docs
  docs: networking: device_drivers: fix bad usage of UTF-8 chars
  docs: hwmon: tmp103.rst: fix bad usage of UTF-8 chars
  docs: ABI: remove some spurious characters
  docs: ABI: remove a meaningless UTF-8 character
  docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars
  Documentation: drop optional BOMs
  docs/zh_CN: Remove obsolete translation file

Merge tag 'tpmdd-next-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Bug fixes that have came up after the first pull request"

* tag 'tpmdd-next-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: fix error return code in tpm2_get_cc_attrs_tbl()
  tpm, tpm_tis: Reserve locality in tpm_tis_resume()
  tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
  trusted-keys: match tpm_get_ops on all return paths
  KEYS: trusted: Fix memory leak on object td

If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.

Cc: stable@vger.kernel.org
Fixes: 58472f5c("tpm: validate TPM 2.0 commands")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>

Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.

Cc: stable@vger.kernel.org
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: NHans de Goede <hdegoede@redhat.com>
Fixes: a3fbfae8 ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>

The earlier fix (linked) only partially fixed the locality handling bug
in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x.

Extend the locality handling to cover TPM2.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-integrity/20210220125534.20707-1-jarkko@kernel.org/
Fixes: a3fbfae8 ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>
Tested-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>

The `tpm_get_ops` call at the beginning of the function is not paired
with a `tpm_put_ops` on this return path.

Cc: stable@vger.kernel.org
Fixes: f2219745 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Reviewed-by: NJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>

Two error return paths are neglecting to free allocated object td,
causing a memory leak. Fix this by returning via the error return
path that securely kfree's td.

Fixes clang scan-build warning:
security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential
memory leak [unix.Malloc]

Cc: stable@vger.kernel.org
Fixes: 5df16caa ("KEYS: trusted: Fix incorrect handling of tpm_get_random()")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: NJarkko Sakkinen <jarkko@kernel.org>

Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does

	ptrace(PTRACE_CONT, T);
	ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:

	- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
	  and the tracer does a ptrace request without having consumed
	  the exec event, it's 100% sure that the thread the ptracer
	  thinks it is targeting does not exist anymore, or isn't the
	  same as the one it thinks it is targeting.

	- To some degree this patch adds nothing new. In the scenario
	  above ptrace(L) can fail with -ESRCH if it is called after the
	  execing sub-thread wakes the leader up and before it "steals"
	  the leader's pid.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <signal.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <errno.h>
	#include <pthread.h>
	#include <assert.h>

	void *tf(void *arg)
	{
		execve("/usr/bin/true", NULL, NULL);
		assert(0);

		return NULL;
	}

	int main(void)
	{
		int leader = fork();
		if (!leader) {
			kill(getpid(), SIGSTOP);

			pthread_t th;
			pthread_create(&th, NULL, tf, NULL);
			for (;;)
				pause();

			return 0;
		}

		waitpid(leader, NULL, WSTOPPED);

		ptrace(PTRACE_SEIZE, leader, 0,
				PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
		waitpid(leader, NULL, 0);

		ptrace(PTRACE_CONT, leader, 0,0);
		waitpid(leader, NULL, 0);

		int status, thread = waitpid(-1, &status, 0);
		assert(thread > 0 && thread != leader);
		assert(status == 0x80137f);

		ptrace(PTRACE_CONT, thread, 0,0);
		/*
		 * waitid() because waitpid(leader, &status, WNOWAIT) does not
		 * report status. Why ????
		 *
		 * Why WEXITED? because we have another kernel problem connected
		 * to mt-exec.
		 */
		siginfo_t info;
		assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
		assert(info.si_pid == leader && info.si_status == 0x0405);

		/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
		assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
		assert(errno == ESRCH);

		assert(leader == waitpid(leader, &status, WNOHANG));
		assert(status == 0x04057f);

		assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

		return 0;
	}
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NSimon Marchi <simon.marchi@efficios.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NPedro Alves <palves@redhat.com>
Acked-by: NSimon Marchi <simon.marchi@efficios.com>
Acked-by: NJan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This tries to fix xfstests/generic/495.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Add a new unique fan ACPI device ID for Alder Lake to
support it in acpi_dev_pm_attach() function.

Fixes: 38748bcb ("ACPI: DPTF: Support Alder Lake")
Signed-off-by: NSumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The final solution can be migrating blocks to form a section-aligned file
internally. Meanwhile, let's ask users to do that when preparing the swap
file initially like:
1) create()
2) ioctl(F2FS_IOC_SET_PIN_FILE)
3) fallocate()
Reported-by: Nkernel test robot <oliver.sang@intel.com>
Fixes: 36e4d958 ("f2fs: check if swapfile is section-alligned")
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In f2fs_destroy_compress_ctx(), after f2fs_destroy_compress_ctx(),
cc.cluster_idx will be cleared w/ NULL_CLUSTER, f2fs_cluster_blocks()
may check wrong cluster metadata, fix it.

Fixes: 4c8ff709 ("f2fs: support data compression")
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>