- 04 6月, 2017 6 次提交
-
-
由 Michał Kępień 提交于
Prepare for not using module-wide data in call_fext_func() by explicitly passing it a pointer to struct acpi_device while still using a module-wide pointer in each call. Doing this enables call_fext_func() to fetch the ACPI handle from its argument, making the acpi_handle field of struct fujitsu_laptop useless, so remove that field. While we are at it, the dev field of the same structure is assigned in acpi_fujitsu_laptop_add() but not used for anything, so remove it as well. Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Michał Kępień 提交于
fujitsu-laptop registers two ACPI drivers: one for ACPI device FUJ02B1 enabling backlight control and another for ACPI device FUJ02E3 which handles various other stuff (hotkeys, LEDs, etc.) In a perfect world, private data used by each of these drivers would be neatly encapsulated in a structure specific to a given driver instance. Sadly, firmware present on some Fujitsu laptops makes that impossible by exposing backlight power control (which is what the FUJ02B1 ACPI device should take care of) through the FUJ02E3 ACPI device. This means the backlight driver needs a way to access an ACPI device it is not bound to. When the backlight driver is extracted into a separate module, it will not be able to rely on a module-wide variable any more and such access will happen through an API exposed by fujitsu-laptop. For all known firmwares out in the wild, it seems that whenever the FUJ02B1 ACPI device is present, it is always accompanied by a single instance of the FUJ02E3 ACPI device. We could independently grab an ACPI handle to the FUJ02E3 ACPI device from the backlight driver, but that would require using a hardcoded absolute path to that ACPI device, which is subject to change. It is easier to simply store a module-wide pointer to the last (most likely only) FUJ02E3 ACPI device found, make the aforementioned API use it and cover our bases by warning the user if firmware exposes multiple FUJ02E3 ACPI devices. Introducing this pointer in advance allows us to get rid of the acpi_handle field of struct fujitsu_bl and also enables a bit more step-by-step migration to a device-specific implementation of call_fext_func(). Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Michał Kępień 提交于
Only allocate memory for struct fujitsu_laptop when the FUJ02E3 ACPI device is present. Use devm_kzalloc() for allocating memory to simplify cleanup. Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Michał Kępień 提交于
To prevent using module-wide data in backlight-related code, employ acpi_driver_data() and bl_get_data() where possible to fetch device-specific data to work on in each function. This makes the input local variable in acpi_fujitsu_bl_notify() and the acpi_handle field of struct fujitsu_bl redundant, so remove them. Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Michał Kępień 提交于
Only allocate memory for struct fujitsu_bl when the FUJ02B1 ACPI device is present. Use devm_kzalloc() for allocating memory to simplify cleanup. Due to the fact that the power property of the backlight device created by the backlight driver is accessed from acpi_fujitsu_laptop_add(), pointer to the allocated memory will remain stored in a module-wide variable until the backlight driver is extracted into a separate module. Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Michał Kępień 提交于
In portions of the driver which use device-specific data, rename local variables from fujitsu_bl and fujitsu_laptop to priv in order to clearly distinguish these parts from code that uses module-wide data. Signed-off-by: NMichał Kępień <kernel@kempniu.pl> Reviewed-by: NJonathan Woithe <jwoithe@just42.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
- 31 5月, 2017 1 次提交
-
-
由 Hans de Goede 提交于
Devices with the intel_cht_int33fe ACPI device use a max17047 fuel-gauge combined with a bq24272i charger, in order for the fuel-gauge driver to correctly display charging / discharging status it needs to know which charger is supplying the battery. This commit sets the supplied-from device property to the name of the bq24272i charger for this. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 26 5月, 2017 1 次提交
-
-
由 Matthias Kaehlcke 提交于
The function is currently not used, however it is part of the API and might be used in the future. Adding the attribute fixes the following warning when building with clang: drivers/platform/x86/intel_pmc_ipc.c:189:18: error: unused function 'ipc_data_readb' [-Werror,-Wunused-function] Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 24 5月, 2017 2 次提交
-
-
由 Hao Wei Tee 提交于
Don't simply throw this to userspace via the sparse_keymap (which does not have a mapping for scancode 1), as this causes KEY_UNKNOWN to be emitted, which is a nuisance and of no use at all (it is not the right way to expose this ACPI event to userspace, anyway, and the original intention of the commit which added this (cfee5d63) was only to suppress an unhandled event log message). Signed-off-by: NHao Wei Tee <angelsl@angelsl.xyz> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Arnd Bergmann 提交于
A readonly sysfs property must not have a 'store' function: drivers/platform/x86/ideapad-laptop.c:438:16: error: 'touchpad_store' defined but not used [-Werror=unused-function] We can either comment it out or remove the function entirely, without a good reason one or or another I picked the second option. Fixes: 7f363145 ("platform/x86: ideapad-laptop: Switch touchpad attribute to be RO") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 16 5月, 2017 1 次提交
-
-
由 Guillaume Douézan-Grard 提交于
The latest Topstar BIOS updates (109_931P) advertise the "TPS0001" device id by default, preventing the topstar-laptop module from being loaded automatically. Signed-off-by: NGuillaume Douézan-Grard <gdouezangrard@gmail.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
- 15 5月, 2017 7 次提交
-
-
由 Hans de Goede 提交于
PEAQ is a new European OEM, I've bought one of their 2-in-1 x86 devices, which is actually quite a nice device. Under Windows it has Dolby software for "better" sound and you can select different equalizer presets using a special button. This WMI interface for this button is not really nice, as it does not do notifies (it really does not I triple checked), but since I had already figured out the entire WMI interface for this I decided to go the full mile anyway and implement a WMI based input driver for this using input_polldev since, well, we need to poll. This commit adds support for this button making it report KEY_SOUND input events. KEY_SOUND is already used in various places to switch sound into theatre mode and things like that so it seems appropriate here. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> [dvhart: minor declaration ordering and commit log typo fixes] Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Andy Shevchenko 提交于
As per discussion [1] there are only few users of module_param_call() in kernel which prevent to read module parameters back. It thinkpad_acpi driver there is even no method do so. Thus, for now, add just a comment to explain why 0 is used as permissions in module_param_call(). [1]: https://patchwork.ozlabs.org/patch/713245/ Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
-
由 Andy Shevchenko 提交于
There is no point to keep string literal split. It even makes slightly harder to maintain and debug. Join string literals back to be oneliners. While here, print negative error without changing a sign as it is a common pattern in the kernel. Other than above there were no functional changes intended. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
-
由 Hans de Goede 提交于
Add touchscreen info for the GP-electronic T701 tablet. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Geliang Tang 提交于
Use memdup_user_nul() helper instead of open-coding to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Andy Shevchenko 提交于
For now let's restrict touchpad attribute to be read only. We might revisit this in the future though. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Ritesh Raj Sarraf 提交于
Lenovo Yoga (many variants: Yoga, Yoga2 Pro, Yoga2 13, Yoga3 Pro, Yoga 3 14, etc) has multiple modles that are a hybrid laptop, working in laptop mode as well as tablet mode. Currently, there is no easy interface to determine the touchpad status, which in case of the Yoga family of machines, can also be useful to assume tablet mode status. Note: The ideapad-laptop driver does not provide a SW_TABLET_MODE either. For a detailed discussion on why we want either of the interfaces, please see: https://bugs.launchpad.net/onboard/+bug/1366421/comments/43 This patch adds a sysfs interface for read/write access under: /sys/bus/platform/devices/VPC2004\:00/touchpad_mode Signed-off-by: NRitesh Raj Sarraf <rrs@debian.org> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 14 5月, 2017 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML fixes from Richard Weinberger: "No new stuff, just fixes" * 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add missing NR_CPUS include um: Fix to call read_initrd after init_bootmem um: Include kbuild.h instead of duplicating its macros um: Fix PTRACE_POKEUSER on x86_64 um: Set number of CPUs um: Fix _print_addr()
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages
-
- 13 5月, 2017 17 次提交
-
-
由 Roman Gushchin 提交于
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
Although there are a ton of free swap and anonymous LRU page in elgible zones, OOM happened. balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null), order=0, oom_score_adj=0 CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x21d/0x3f0 out_of_memory+0xd8/0x390 __alloc_pages_slowpath+0xbc1/0xc50 __alloc_pages_nodemask+0x1a5/0x1c0 pte_alloc_one+0x20/0x50 __pte_alloc+0x1e/0x110 __handle_mm_fault+0x919/0x960 handle_mm_fault+0x77/0x120 __do_page_fault+0x27a/0x550 trace_do_page_fault+0x43/0x150 do_async_page_fault+0x2c/0x90 async_page_fault+0x28/0x30 Mem-Info: active_anon:424716 inactive_anon:65314 isolated_anon:0 active_file:52 inactive_file:46 isolated_file:0 unevictable:0 dirty:27 writeback:0 unstable:0 slab_reclaimable:3967 slab_unreclaimable:4125 mapped:133 shmem:43 pagetables:1674 bounce:0 free:4637 free_pcp:225 free_cma:0 Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 992 992 1952 DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB lowmem_reserve[]: 0 0 0 959 Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB 378 total pagecache pages 17 pages in swap cache Swap cache stats: add 17325, delete 17302, find 0/27 Free swap = 978940kB Total swap = 1048572kB 524157 pages RAM 0 pages HighMem/MovableOnly 12629 pages reserved 0 pages cma reserved 0 pages hwpoisoned [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name [ 433] 0 433 4904 5 14 3 82 0 upstart-udev-br [ 438] 0 438 12371 5 27 3 191 -1000 systemd-udevd With investigation, skipping page of isolate_lru_pages makes reclaim void because it returns zero nr_taken easily so LRU shrinking is effectively nothing and just increases priority aggressively. Finally, OOM happens. The problem is that get_scan_count determines nr_to_scan with eligible zones so although priority drops to zero, it couldn't reclaim any pages if the LRU contains mostly ineligible pages. get_scan_count: size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx); size = size >> sc->priority; Assumes sc->priority is 0 and LRU list is as follows. N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H (Ie, small eligible pages are in the head of LRU but others are almost ineligible pages) In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from tail of the LRU are not eligible pages. If get_scan_count counts skipped pages, it doesn't reclaim any pages remained after scanning 4 pages so it ends up OOM happening. This patch makes isolate_lru_pages try to scan pages until it encounters eligible zones's pages. [akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
We have encountered need_resched warnings in __collapse_huge_page_copy() while doing {clear,copy}_user_highpage() over HPAGE_PMD_NR source pages. mm->mmap_sem is held for write, but the iteration is well bounded. Reschedule as needed. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705101426380.109808@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Reported-by: NJan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has pulled asm/pgtable.h include dependency to linux/vmalloc.h and that turned out to be a bad idea for some architectures. E.g. m68k fails with In file included from arch/m68k/include/asm/pgtable_mm.h:145:0, from arch/m68k/include/asm/pgtable.h:4, from include/linux/vmalloc.h:9, from arch/m68k/kernel/module.c:9: arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page': >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function) #define pgd_offset_k(address) pgd_offset(&init_mm, address) as spotted by kernel build bot. nios2 fails for other reason In file included from include/asm-generic/io.h:767:0, from arch/nios2/include/asm/io.h:61, from include/linux/io.h:25, from arch/nios2/include/asm/pgtable.h:18, from include/linux/mm.h:70, from include/linux/pid_namespace.h:6, from include/linux/ptrace.h:9, from arch/nios2/include/uapi/asm/elf.h:23, from arch/nios2/include/asm/elf.h:22, from include/linux/elf.h:4, from include/linux/module.h:15, from init/main.c:16: include/linux/vmalloc.h: In function '__vmalloc_node_flags': include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'? which is due to the newly added #include <asm/pgtable.h>, which on nios2 includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which again includes <linux/vmalloc.h>. Tweaking that around just turns out a bigger headache than necessary. This patch reverts 1f5307b1 and reimplements the original fix in a different way. __vmalloc_node_flags can stay static inline which will cover vmalloc* functions. We only have one external user (kvmalloc_node) and we can export __vmalloc_node_flags_caller and provide the caller directly. This is much simpler and it doesn't really need any games with header files. [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: revert old comment] Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users") Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 SeongJae Park 提交于
One return case of `__collapse_huge_page_swapin()` does not invoke tracepoint while every other return case does. This commit adds a tracepoint invocation for the case. Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.comSigned-off-by: NSeongJae Park <sj38.park@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Liska 提交于
Starting from GCC 7.1, __gcov_exit is a new symbol expected to be implemented in a profiling runtime. [akpm@linux-foundation.org: coding-style fixes] [mliska@suse.cz: v2] Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.czSigned-off-by: NMartin Liska <mliska@suse.cz> Acked-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Reza Arbab 提交于
After commit e2ecc8a7 ("mm, vmstat: print non-populated zones in zoneinfo"), /proc/zoneinfo will show unpopulated zones. A memoryless node, having no populated zones at all, was previously ignored, but will now trigger the WARN() in is_zone_first_populated(). Remove this warning, as its only purpose was to warn of a situation that has since been enabled. Aside: The "per-node stats" are still printed under the first populated zone, but that's not necessarily the first stanza any more. I'm not sure which criteria is more important with regard to not breaking parsers, but it looks a little weird to the eye. Fixes: e2ecc8a7 ("mm, vmstat: print node-based stats in zoneinfo file") Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Deepa Dinamani 提交于
All uses of the current_fs_time() function have been replaced by other time interfaces. And, its use cases can be fulfilled by current_time() or ktime_get_* variants. Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In his particular case he has hit a bad_page("page still charged to cgroup") when onlining a hwpoison page. While this looks like something that shouldn't happen in the first place because onlining hwpages and returning them to the page allocator makes only little sense it shows a real problem. hwpoison pages do not get freed usually so we do not uncharge them (at least not since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API")). Each charge pins memcg (since e8ea14cc ("mm: memcontrol: take a css reference for each charged page")) as well and so the mem_cgroup and the associated state will never go away. Fix this leak by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache(). We also have to tweak uncharge_list because it cannot rely on zero ref count for these pages. [akpm@linux-foundation.org: coding-style fixes] Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: NBalbir Singh <bsingharora@gmail.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "Incremental fixes and a small feature addition on top of the main libnvdimm 4.12 pull request: - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX. The size regression is fixed by moving all dax helpers into the dax-core and only specifying "select DAX" for FS_DAX and dax-capable drivers. He also asked for clarification of the NR_DEV_DAX config option which, on closer look, does not need to be a config option at all. Mike also throws in a DEV_DAX_PMEM fixup for good measure. - Ben's attention to detail on -stable patch submissions caught a case where the recent fixes to arch_copy_from_iter_pmem() missed a condition where we strand dirty data in the cache. This is tagged for -stable and will also be included in the rework of the pmem api to a proposed {memcpy,copy_user}_flushcache() interface for 4.13. - Vishal adds a feature that missed the initial pull due to pending review feedback. It allows the kernel to clear media errors when initializing a BTT (atomic sector update driver) instance on a pmem namespace. - Ross noticed that the dax_device + dax_operations conversion broke __dax_zero_page_range(). The nvdimm unit tests fail to check this path, but xfstests immediately trips over it. No excuse for missing this before submitting the 4.12 pull request. These all pass the nvdimm unit tests and an xfstests spot check. The set has received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: filesystem-dax: fix broken __dax_zero_page_range() conversion libnvdimm, btt: ensure that initializing metadata clears poison libnvdimm: add an atomic vs process context flag to rw_bytes x86, pmem: Fix cache flushing for iovec write < 8 bytes device-dax: kill NR_DEV_DAX block, dax: move "select DAX" from BLOCK to FS_DAX device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains a one-liner change that has a significant impact: disabling the build of OSS. It's been unmaintained for long time, and we'd like to drop the stuff. Finally, as the first step, stop the build. Let's see whether it works without much complaints. Other than that, there are two small fixes for HD-audio" * tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: sound: Disable the build of OSS drivers ALSA: hda: Fix cpu lockup when stopping the cmd dmas ALSA: hda - Add mute led support for HP EliteBook 840 G3
-