- 07 7月, 2011 5 次提交
-
-
由 Ping Cheng 提交于
The old code may call input_sync() without sending any other events. While it will be suppressed by the input core not calling it at all is still cheaper. Signed-off-by: NPing Cheng <pingc@wacom.com> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT as the default button events for tablet buttons. Change Graphire4 and old Bamboo to the same settings. Signed-off-by: NPing Cheng <pingc@wacom.com> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
With the removal of BTN_TOOL_FINGER for tablet buttons and expresskeys, serial number is needed to distingush if the events were from a regular tool (stylus, eraser, or mouse) or the attribures (buttons, strips, or wheels) on the tablet since there are overlapped events between the tools and the tablet attributes. Signed-off-by: NPing Cheng <pingc@wacom.com> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
BTN_TOOL_FINGER was designed to indicate a single finger touch. Remove the lines that borrowed this type for expresskeys and tablet buttons. Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Chris Hudson 提交于
Signed-off-by: NChris Hudson <chudson@kionix.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 05 7月, 2011 5 次提交
-
-
由 Wolfram Sang 提交于
Currently, battery drivers also use poll_sample() provided by the wm97xx-core but this code always checks if the pen is down. Mark the channels which really need this (i.e. for the touchscreen) with the PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels can always be read. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Wolfram Sang 提交于
The current implementation of poll_sample() has the problem that one of its arguments, the channel to be selected, differs from wm9713 to other variants. This parameter gets passed to the (currently unused) mach-specific functions pre_sample() and post_sample() which thus have to deal with codec-specific differences. Refactor the routine so that the argument to poll_sample() is generic for all codecs and do necessary conversions only in the codec-specific driver. The outcome even uses less code and removes the non-standard use of the PEN_DOWN bit to mark the AUX-channels. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Stefano Stabellini 提交于
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Chris Moeller 提交于
This patch implements rumble support for XBox360 Wireless Controllers. Signed-off-by: NChris Moeller <kode54@gmail.c> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 04 7月, 2011 2 次提交
-
-
由 Iiro Valkonen 提交于
Handle the objects with multiple instances correctly when the configuration data is loaded. Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Iiro Valkonen 提交于
Update the object list to include new objects, and add unique identifiers so we can distinguish between old & new generation of the same object. Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 29 6月, 2011 4 次提交
-
-
由 Jiejing Zhang 提交于
The Quick Charge bit in Electrode conf register should be set in init function. This bit was missed in chip's document, which may cause touch controller charge too slow to generate an interrupt. Also, adjust the default vlaue of touch and release threshold to make touch key more sensitive, this fix touch may not sensitive after setup with plastic case. Signed-off-by: NJiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Joseph Lai 提交于
This driver is registered as an input device. An IRQ is required in this basic driver configuration. Signed-off-by: NJoseph Lai <joseph_lai@wistron.com> [Cleaned up PM_RUNTIME defines] Signed-off-by: NAlan Cox <alan@linux.intel.com> [dtor@mail.ru: consolidated PM methods, some code rearrangement] Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Hans-Christian Egtvedt 提交于
This patch updates the email address of the gpio_mouse, at32psif, and atmel-wm97xx drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 6月, 2011 7 次提交
-
-
由 Igor Grinberg 提交于
Use gpio_request_one() instead of multiple gpiolib calls. This also simplifies error handling a bit. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
Tested-by: Alex Tervoort <alex.tervoort@gmail.com> for 6A Signed-off-by: NDavid Foley <favux.is@gmail.com> Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
D4 has 1024, not 512, pressure levels. Reported-by: NDavid Foley <favux.is@gmail.com> Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 David Jander 提交于
Initialize gpio_keys driver at late_initcall level, to give it a chance to work with GPIO expanders that might not be ready yet if we initialize the driver at module_init time. This is strictly a band-aid until there is a better way to specify inter-device dependencies. Signed-off-by: NDavid Jander <david@protonic.nl> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Axel Lin 提交于
Remove the space between "platform:" prefix and the driver name. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Axel Lin 提交于
Remove the space between "platform:" prefix and the driver name. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jesper Juhl 提交于
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/input/. This patch removes them. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 22 6月, 2011 5 次提交
-
-
由 Eric Miao 提交于
Signed-off-by: NSammy He <r62914@freescale.com> Signed-off-by: NEric Miao <eric.miao@linaro.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Aristeu Rozanski 提交于
The Wacom DTU-2231 tablet has two interfaces on its default configuration and both have HID class, leading to the creation of two input devices instead of one. Only the first one is used, so filter out the second. Signed-off-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
So don't set ABS_RX/ABS_RY for them. Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Magnus Hörlin 提交于
Signed-off-by: NMagnus Hörlin <magnus@alefors.se> Reviewed-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 David Jander 提交于
Use a threaded interrupt handler in order to permit the handler to use a GPIO driver that causes things like I2C transactions being done inside the handler context. Signed-off-by: NDavid Jander <david@protonic.nl> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 6月, 2011 3 次提交
-
-
由 Leigh Brown 提交于
According to the data sheet the interrupt should be level rather than edge triggered. This fixes the issue of the Nokia N810 keypad stopping responding if multiple key events occur in quick succession. Signed-off-by: NLeigh Brown <leigh@solinno.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Felipe Balbi 提交于
There's no need for that workqueue anymore. Get rid of it and move to threaded IRQs instead. Signed-off-by: NFelipe Balbi <balbi@ti.com> Tested-by: NLeigh Brown <leigh@solinno.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Wolfram Sang 提交于
A few new i2c-drivers came into the kernel which clear the clientdata pointer on exit or error. This is not required anymore since the core will do it for us. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 6月, 2011 3 次提交
-
-
由 Magnus Damm 提交于
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: NMagnus Damm <damm@opensource.se> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Janusz Krzysztofik 提交于
Otherwise the updated evdev driver (commit cdda911c, "Input: evdev - only signal polls on full packets") no longer works on top of omap-keypad. Tested on Amstrad Delta. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
We should only wake waiters on the event device when we actually post an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting threads runnable only to go right back to sleep because the device still isn't readable. Reported-by: NJeffrey Brown <jeffbrown@android.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 04 6月, 2011 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit b1c43f82. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41. Milton Miller pointed out the 'unsigned int' issue. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NMilton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 5月, 2011 3 次提交
-
-
由 Trilok Soni 提交于
Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NTrilok Soni <tsoni@codeaurora.org> Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Trilok Soni 提交于
Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NTrilok Soni <tsoni@codeaurora.org> Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Samuel Ortiz 提交于
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 26 5月, 2011 1 次提交
-
-
由 Hans Petter Selasky 提交于
[dtor@mail.ru: added mousedev changes] Signed-off-by: NHans Petter Selasky <hselasky@c2i.net> Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 20 5月, 2011 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Up and down movements were reversed, left and right buttons were swapped. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-