1. 01 3月, 2014 8 次提交
  2. 28 2月, 2014 18 次提交
    • S
      arm64: mm: Add double logical invert to pte accessors · 84fe6826
      Steve Capper 提交于
      Page table entries on ARM64 are 64 bits, and some pte functions such as
      pte_dirty return a bitwise-and of a flag with the pte value. If the
      flag to be tested resides in the upper 32 bits of the pte, then we run
      into the danger of the result being dropped if downcast.
      
      For example:
      	gather_stats(page, md, pte_dirty(*pte), 1);
      where pte_dirty(*pte) is downcast to an int.
      
      This patch adds a double logical invert to all the pte_ accessors to
      ensure predictable downcasting.
      Signed-off-by: NSteve Capper <steve.capper@linaro.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      84fe6826
    • H
      dm cache: fix truncation bug when mapping I/O to >2TB fast device · e0d849fa
      Heinz Mauelshagen 提交于
      When remapping a block to the cache's fast device that is larger than
      2TB we must not truncate the destination sector to 32bits.  The 32bit
      temporary result of from_cblock() was being overflowed in
      remap_to_cache() due to the logical left shift.
      
      Use an intermediate 64bit type to store the 32bit from_cblock() result
      to fix the overflow.
      Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org
      e0d849fa
    • B
      powerpc/powernv: Fix indirect XSCOM unmangling · e0cf9576
      Benjamin Herrenschmidt 提交于
      We need to unmangle the full address, not just the register
      number, and we also need to support the real indirect bit
      being set for in-kernel uses.
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      CC: <stable@vger.kernel.org> [v3.13]
      e0cf9576
    • B
      powerpc/powernv: Fix opal_xscom_{read,write} prototype · 2f3f38e4
      Benjamin Herrenschmidt 提交于
      The OPAL firmware functions opal_xscom_read and opal_xscom_write
      take a 64-bit argument for the XSCOM (PCB) address in order to
      support the indirect mode on P8.
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      CC: <stable@vger.kernel.org> [v3.13]
      2f3f38e4
    • G
      powerpc/powernv: Refactor PHB diag-data dump · af87d2fe
      Gavin Shan 提交于
      As Ben suggested, the patch prints PHB diag-data with multiple
      fields in one line and omits the line if the fields of that
      line are all zero.
      
      With the patch applied, the PHB3 diag-data dump looks like:
      
      PHB3 PHB#3 Diag-data (Version: 1)
      
        brdgCtl:     00000002
        RootSts:     0000000f 00400000 b0830008 00100147 00002000
        nFir:        0000000000000000 0030006e00000000 0000000000000000
        PhbSts:      0000001c00000000 0000000000000000
        Lem:         0000000000100000 42498e327f502eae 0000000000000000
        InAErr:      8000000000000000 8000000000000000 0402030000000000 0000000000000000
        PE[  8] A/B: 8480002b00000000 8000000000000000
      
      [ The current diag data is so big that it overflows the printk
        buffer pretty quickly in cases when we get a handful of errors
        at once which can happen. --BenH
      ]
      Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
      CC: <stable@vger.kernel.org>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      af87d2fe
    • G
      powerpc/powernv: Dump PHB diag-data immediately · 94716604
      Gavin Shan 提交于
      The PHB diag-data is important to help locating the root cause for
      EEH errors such as frozen PE or fenced PHB. However, the EEH core
      enables IO path by clearing part of HW registers before collecting
      this data causing it to be corrupted.
      
      This patch fixes this by dumping the PHB diag-data immediately when
      frozen/fenced state on PE or PHB is detected for the first time in
      eeh_ops::get_state() or next_error() backend.
      Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
      CC: <stable@vger.kernel.org>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      94716604
    • P
      powerpc: Increase stack redzone for 64-bit userspace to 512 bytes · 573ebfa6
      Paul Mackerras 提交于
      The new ELFv2 little-endian ABI increases the stack redzone -- the
      area below the stack pointer that can be used for storing data --
      from 288 bytes to 512 bytes.  This means that we need to allow more
      space on the user stack when delivering a signal to a 64-bit process.
      
      To make the code a bit clearer, we define new USER_REDZONE_SIZE and
      KERNEL_REDZONE_SIZE symbols in ptrace.h.  For now, we leave the
      kernel redzone size at 288 bytes, since increasing it to 512 bytes
      would increase the size of interrupt stack frames correspondingly.
      
      Gcc currently only makes use of 288 bytes of redzone even when
      compiling for the new little-endian ABI, and the kernel cannot
      currently be compiled with the new ABI anyway.
      
      In the future, hopefully gcc will provide an option to control the
      amount of redzone used, and then we could reduce it even more.
      
      This also changes the code in arch_compat_alloc_user_space() to
      preserve the expanded redzone.  It is not clear why this function would
      ever be used on a 64-bit process, though.
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      CC: <stable@vger.kernel.org> [v3.13]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      573ebfa6
    • L
      powerpc/ftrace: bugfix for test_24bit_addr · a95fc585
      Liu Ping Fan 提交于
      The branch target should be the func addr, not the addr of func_descr_t.
      So using ppc_function_entry() to generate the right target addr.
      Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      a95fc585
    • L
      powerpc/crashdump : Fix page frame number check in copy_oldmem_page · f5295bd8
      Laurent Dufour 提交于
      In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
      decide if the page is backed or not, is not valid when the memory layout is
      not continuous.
      
      This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
      in the memory. In that case max_pfn points to the end of RTAS, and a hole
      between the end of the kdump kernel and RTAS is not backed by PTEs. As a
      consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
      in a direct way the pages in that hole.
      
      This fix relies on the memblock's service memblock_is_region_memory to
      check if the read page is part or not of the directly accessible memory.
      Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
      Tested-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      CC: <stable@vger.kernel.org>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      f5295bd8
    • T
      powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly · 41dd03a9
      Tony Breeds 提交于
      Currently we're storing a host endian RTAS token in
      rtas_stop_self_args.token.  We then pass that directly to rtas.  This is
      fine on big endian however on little endian the token is not what we
      expect.
      
      This will typically result in hitting:
      	panic("Alas, I survived.\n");
      
      To fix this we always use the stop-self token in host order and always
      convert it to be32 before passing this to rtas.
      Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      41dd03a9
    • P
      kvm, vmx: Really fix lazy FPU on nested guest · 1b385cbd
      Paolo Bonzini 提交于
      Commit e504c909 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
      highlighted a real problem, but the fix was subtly wrong.
      
      nested_read_cr0 is the CR0 as read by L2, but here we want to look at
      the CR0 value reflecting L1's setup.  In other words, L2 might think
      that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
      running it with TS=1, we should inject the fault into L1.
      
      The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
      it.
      
      Fixes: e504c909Reported-by: NKashyap Chamarty <kchamart@redhat.com>
      Reported-by: NStefan Bader <stefan.bader@canonical.com>
      Tested-by: NKashyap Chamarty <kchamart@redhat.com>
      Tested-by: NAnthoine Bourgeois <bourgeois@bertin.fr>
      Cc: stable@vger.kernel.org
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      1b385cbd
    • L
      Merge tag 'metag-fixes-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag · 86c7654f
      Linus Torvalds 提交于
      Pull Metag arch and asm-generic fixes from James Hogan:
      
       - Add the new sched_setattr/sched_getattr syscalls to the asm-generic
         syscall list, which is used by arc, arm64, c6x, hexagon, metag,
        openrisc, score, tile, and unicore32.
      
       - An IRQ affinity bug fix for metag to prevent interrupts being
         vectored to offline CPUs when their affinity is changed via
         /proc/irq/ (thanks tglx).
      
      * tag 'metag-fixes-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
        irq-metag*: stop set_affinity vectoring to offline cpus
        asm-generic: add sched_setattr/sched_getattr syscalls
      86c7654f
    • L
      Merge tag 'pwm/for-3.14-rc5' of... · 3ebd3da6
      Linus Torvalds 提交于
      Merge tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
      
      Pull pwm fix from Thierry Reding:
       "Just a single trivial patch to plug a memory leak in an error path"
      
      * tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
        pwm: lp3943: Fix potential memory leak during request
      3ebd3da6
    • L
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · 8d753182
      Linus Torvalds 提交于
      Pull filesystem fixes from Jan Kara:
       "Notification, writeback, udf, quota fixes
      
        The notification patches are (with one exception) a fallout of my
        fsnotify rework which went into -rc1 (I've extented LTP to cover these
        cornercases to avoid similar breakage in future).
      
        The UDF patch is a nasty data corruption Al has recently reported,
        the revert of the writeback patch is due to possibility of violating
        sync(2) guarantees, and a quota bug can lead to corruption of quota
        files in ocfs2"
      
      * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
        fsnotify: Allocate overflow events with proper type
        fanotify: Handle overflow in case of permission events
        fsnotify: Fix detection whether overflow event is queued
        Revert "writeback: do not sync data dirtied after sync start"
        quota: Fix race between dqput() and dquot_scan_active()
        udf: Fix data corruption on file type conversion
        inotify: Fix reporting of cookies for inotify events
      8d753182
    • L
      Merge tag 'upstream-3.14-rc5' of git://git.infradead.org/linux-ubifs · bb7d43b1
      Linus Torvalds 提交于
      Pull ubifs fix from Artem Bityutskiy:
       "Just a single fix for the UBI module unload path which makes sure we
        do not touch freed memory"
      
      * tag 'upstream-3.14-rc5' of git://git.infradead.org/linux-ubifs:
        UBI: fix some use after free bugs
      bb7d43b1
    • A
      kvm: x86: fix emulator buffer overflow (CVE-2014-0049) · a08d3b3b
      Andrew Honig 提交于
      The problem occurs when the guest performs a pusha with the stack
      address pointing to an mmio address (or an invalid guest physical
      address) to start with, but then extending into an ordinary guest
      physical address.  When doing repeated emulated pushes
      emulator_read_write sets mmio_needed to 1 on the first one.  On a
      later push when the stack points to regular memory,
      mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.
      
      As a result, KVM exits to userspace, and then returns to
      complete_emulated_mmio.  In complete_emulated_mmio
      vcpu->mmio_cur_fragment is incremented.  The termination condition of
      vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
      The code bounces back and fourth to userspace incrementing
      mmio_cur_fragment past it's buffer.  If the guest does nothing else it
      eventually leads to a a crash on a memcpy from invalid memory address.
      
      However if a guest code can cause the vm to be destroyed in another
      vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
      can be used by the guest to control the data that's pointed to by the
      call to cancel_work_item, which can be used to gain execution.
      
      Fixes: f78146b0Signed-off-by: NAndrew Honig <ahonig@google.com>
      Cc: stable@vger.kernel.org (3.5+)
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a08d3b3b
    • M
      arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT · b20c9f29
      Marc Zyngier 提交于
      Commit 1fcf7ce0 (arm: kvm: implement CPU PM notifier) added
      support for CPU power-management, using a cpu_notifier to re-init
      KVM on a CPU that entered CPU idle.
      
      The code assumed that a CPU entering idle would actually be powered
      off, loosing its state entierely, and would then need to be
      reinitialized. It turns out that this is not always the case, and
      some HW performs CPU PM without actually killing the core. In this
      case, we try to reinitialize KVM while it is still live. It ends up
      badly, as reported by Andre Przywara (using a Calxeda Midway):
      
      [    3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
      [    3.663897] unexpected data abort in Hyp mode at: 0xc067d150
      [    3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0
      
      The trick here is to detect if we've been through a full re-init or
      not by looking at HVBAR (VBAR_EL2 on arm64). This involves
      implementing the backend for __hyp_get_vectors in the main KVM HYP
      code (rather small), and checking the return value against the
      default one when the CPU notifier is called on CPU_PM_EXIT.
      Reported-by: NAndre Przywara <osp@andrep.de>
      Tested-by: NAndre Przywara <osp@andrep.de>
      Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Cc: Rob Herring <rob.herring@linaro.org>
      Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
      Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b20c9f29
    • M
      dm thin: allow metadata space larger than supported to go unused · 7d48935e
      Mike Snitzer 提交于
      It was always intended that a user could provide a thin metadata device
      that is larger than the max supported by the on-disk format.  The extra
      space would just go unused.
      
      Unfortunately that never worked.  If the user attempted to use a larger
      metadata device on creation they would get an error like the following:
      
       device-mapper: space map common: space map too large
       device-mapper: transaction manager: couldn't create metadata space map
       device-mapper: thin metadata: tm_create_with_sm failed
       device-mapper: table: 252:17: thin-pool: Error creating metadata object
       device-mapper: ioctl: error adding target to table
      
      Fix this by allowing the initial metadata space map creation to cap its
      size at the max number of blocks supported (DM_SM_METADATA_MAX_BLOCKS).
      get_metadata_dev_size() must also impose DM_SM_METADATA_MAX_BLOCKS (via
      THIN_METADATA_MAX_SECTORS), otherwise extending metadata would cap at
      THIN_METADATA_MAX_SECTORS_WARNING (which is larger than supported).
      
      Also, the calculation for THIN_METADATA_MAX_SECTORS didn't account for
      the sizeof the disk_bitmap_header.  So the supported maximum metadata
      size is a bit smaller (reduced from 33423360 to 33292800 sectors).
      
      Lastly, remove the "excess space will not be used" warning message from
      get_metadata_dev_size(); it resulted in printing the warning multiple
      times.  Factor out warn_if_metadata_device_too_big(), call it from
      pool_ctr() and maybe_resize_metadata_dev().
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      7d48935e
  3. 27 2月, 2014 8 次提交
    • T
      Merge tag 'asoc-v3.14-rc4-2' of... · 997e7547
      Takashi Iwai 提交于
      Merge tag 'asoc-v3.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
      
      ASoC: Updates for v3.14
      
      A few more driver specific bug fixes, all driver specific things that
      only affect users of those devices.
      997e7547
    • M
      23308e88
    • M
    • M
      Merge tag 'asoc-v3.14-rc4' into asoc-linus · f3cfc7d9
      Mark Brown 提交于
      ASoC: Fixes for v3.14
      
      A somewhat large set of fixes here due to the identification of some
      systematic problems with hard to use APIs in the subsystem.  Takashi did
      a lot of work to address the enumeration API which uncovered a number of
      off by one bugs caused by confusing APIs while Charles addressed issues
      in the locking around DAPM.
      
      # gpg: Signature made Sun 23 Feb 2014 13:29:34 KST using RSA key ID 7EA229BD
      # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
      # gpg:                 aka "Mark Brown <broonie@debian.org>"
      # gpg:                 aka "Mark Brown <broonie@kernel.org>"
      # gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
      # gpg:                 aka "Mark Brown <broonie@linaro.org>"
      # gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
      f3cfc7d9
    • M
      Merge tag 'asoc-v3.14-rc3' into asoc-linus · e2f45592
      Mark Brown 提交于
      ASoC: Fixes for v3.14
      
      A few fixes, all driver speccific ones.  The DaVinci ones aren't as
      clear as they should be from the subject lines on the commits but they
      fix issues which will prevent correct operation in some use cases and
      only affect that particular driver so are reasonably safe.
      
      # gpg: Signature made Wed 19 Feb 2014 13:23:13 KST using RSA key ID 7EA229BD
      # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
      # gpg:                 aka "Mark Brown <broonie@debian.org>"
      # gpg:                 aka "Mark Brown <broonie@kernel.org>"
      # gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
      # gpg:                 aka "Mark Brown <broonie@linaro.org>"
      # gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
      e2f45592
    • T
      ASoC: sta32x: Fix wrong enum for limiter2 release rate · b3619b28
      Takashi Iwai 提交于
      There is a typo in the Limiter2 Release Rate control, a wrong enum for
      Limiter1 is assigned.  It must point to Limiter2.
      Spotted by a compile warning:
      
      In file included from sound/soc/codecs/sta32x.c:34:0:
      sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable]
       static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
                                   ^
      include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’
        struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
                        ^
      sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’
       static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
              ^
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      Signed-off-by: NMark Brown <broonie@linaro.org>
      Cc: <stable@vger.kernel.org>
      b3619b28
    • T
      Merge tag 'asoc-v3.14-rc4' of... · e2755cf9
      Takashi Iwai 提交于
      Merge tag 'asoc-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
      
      ASoC: Fixes for v3.14
      
      A somewhat large set of fixes here due to the identification of some
      systematic problems with hard to use APIs in the subsystem.  Takashi did
      a lot of work to address the enumeration API which uncovered a number of
      off by one bugs caused by confusing APIs while Charles addressed issues
      in the locking around DAPM.
      e2755cf9
    • M
      KVM: MMU: drop read-only large sptes when creating lower level sptes · 404381c5
      Marcelo Tosatti 提交于
      Read-only large sptes can be created due to read-only faults as
      follows:
      
      - QEMU pagetable entry that maps guest memory is read-only
      due to COW.
      - Guest read faults such memory, COW is not broken, because
      it is a read-only fault.
      - Enable dirty logging, large spte not nuked because it is read-only.
      - Write-fault on such memory causes guest to loop endlessly
      (which must go down to level 1 because dirty logging is enabled).
      
      Fix by dropping large spte when necessary.
      Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      404381c5
  4. 26 2月, 2014 6 次提交