Add sysfs interface to copy VBIOS.

v2: squash in fix for proper vmalloc API (Alex)
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
lru_list not empty warning in sw fini during repeated device bind unbind.
There should be a amdgpu_fence_wait_empty() before the flush_delayed_work()
call as Christian suggested.

[how]
Move to do flush_delayed_work for ttm bo delayed delete wq after fence_driver_hw_fini.

Tested by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NYiqing Yao <yiqing.yao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable KFD initialization with MES enabled.
Signed-off-by: NMukul Joshi <mukul.joshi@amd.com>
Acked-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For kfd hasn't supported mes, skip kfd routines.
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

mes_kiq parameter is used to enable mes kiq pipe.
This module parameter is unneccessary or enabled by default
in final version.

v2: reword commit message.
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the whole doorbell space for mes. Each queue in one process occupies
one doorbell slot to ring the queue submitting.
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some initial settings now are not available from
the atom data table. The assumption that !ps[0]
|| !ps[1] in amdgpu_atom_asic_init is not valid.
In addition, driver needs to strictly follow
atomfirmware structure (asic_init_parameters) to
initialize parameters used to execute asic_init
function, otherwise, the execution of asic_init
would fail.

This shall be applicable to all soc15 adapters,but
let make the transition on soc21 first.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This data has no dependencies, so encapsulate it all within
amdgpu_discovery.c.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- In the latest version of the header, there is a variable name change.
  This should not cause any backward compatibility since the variable is
  at the same offset in the struct.
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With this, we can support more CG flags.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the GPU is passed through to a guest VM, use the PCI
BAR for CPU FB access rather than the physical address of
carve out.  The physical address is not valid in a guest.

v2: Fix HDP handing as suggested by Michel
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_detect_virtualization reads register, amdgpu_device_rreg access
adev->reset_domain->sem if kernel defined CONFIG_LOCKDEP, below is the
random boot hang backtrace on Vega10. It may get random NULL pointer
access backtrace if amdgpu_sriov_runtime is true too.

Move amdgpu_reset_create_reset_domain before calling to RREG32.

 BUG: kernel NULL pointer dereference, address:
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 Workqueue: events work_for_cpu_fn
 RIP: 0010:down_read_trylock+0x13/0xf0
 Call Trace:
  <TASK>
  amdgpu_device_skip_hw_access+0x38/0x80 [amdgpu]
  amdgpu_device_rreg+0x1b/0x170 [amdgpu]
  amdgpu_detect_virtualization+0x73/0x100 [amdgpu]
  amdgpu_device_init.cold.60+0xbe/0x16b1 [amdgpu]
  ? pci_bus_read_config_word+0x43/0x70
  amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
  amdgpu_pci_probe+0x1a1/0x3a0 [amdgpu]

Fixes: d0fb18b5 ("drm/amdgpu: Move reset sem into reset_domain")
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't support runtime pm on APUs.  They support more
dynamic power savings using clock and powergating.
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Tested-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These were leftover from bring up and are no longer
necessary.  The information is available via
the IP discovery table.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

otherwise adev->ip_versions is still empty when amdgpu_gmc_noretry_set
is called.
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

According to my investigation of the state of PCI
reset recently it's not working. The reason is
due to the fact the kernel PCI code rejects SBR
when there are more then one PF under same bridge
which we always have (at least AUDIO PF but usually
more) and that because SBR will reset all the PFS
and devices under the same bridge as you and you
cannot assume they support SBR.
Once we anble FLR support we can reenable this option as
FLR is doable on single PF and doens't have this
restriction.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Dump the list of register values to trace event on GPU reset.
Signed-off-by: NSomalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This test is not particularly useful now that GTT and GART
are decoupled in the driver.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we expose the benchmarks via debugfs, there is no
longer a need for the module parameter.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid multiple runs in parallel to avoid mixing results.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.

v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: NJiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com

Evaluating `pcie_aspm_enabled` as part of driver probe has the implication
that if one PCIe bridge with an AMD GPU connected doesn't support ASPM
then none of them do.  This is an invalid assumption as the PCIe core will
configure ASPM for individual PCIe bridges.

Create a new helper function that can be called by individual dGPUs to
react to the `amdgpu_aspm` module parameter without having negative results
for other dGPUs on the PCIe bus.
Suggested-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Define amdgpu_ras_late_init to call all ras blocks' .ras_late_init.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since this is an existing asic, adjust the code to follow
the same logic as previously so the driver state is consistent.

No functional change intended.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch handles the GPU recovery failure in sriov environment by
retrying the reset if the first reset fails. To determine the condition
of retry, a new macro AMDGPU_RETRY_SRIOV_RESET is added which returns
true if failure is due to ETIMEDOUT, EINVAL or EBUSY, otherwise return
false.A new macro AMDGPU_MAX_RETRY_LIMIT is used to limit the retry to 2.

It also handles the return status in Post Asic Reset by updating the return
code with asic_reset_res and eventually return the return code in
amdgpu_job_timedout().
Signed-off-by: NSurbhi Kakarya <surbhi.kakarya@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing parameters to fix a kerneldoc warning
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update function name.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211205500.601391-1-andrey.grodzovsky@amd.com

Since we have a single instance of reset semaphore which we
lock only once even for XGMI hive we don't need the nested
locking hint anymore.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74120.html

This functions needs to be split into 2 parts where
one is called only once for locking single instance of
reset_domain's sem and reset flag and the other part
which handles MP1 states should still be called for
each device in XGMI hive.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74118.html

We should have a single instance per entrire reset domain.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74116.html

We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74117.html

The reset domain contains register access semaphor
now and so needs to be present as long as each device
in a hive needs it and so it cannot be binded to XGMI
hive life cycle.
Adress this by making reset domain refcounted and pointed
by each member of the hive and the hive itself.

v4:

Fix crash on boot witrh XGMI hive by adding type to reset_domain.
XGMI will only create a new reset_domain if prevoius was of single
device type meaning it's first boot. Otherwsie it will take a
refocunt to exsiting reset_domain from the amdgou device.

Add a wrapper around reset_domain->refcount get/put
and a wrapper around send to reset wq (Lijo)
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74121.html

Since now all GPU resets are serialzied there is no need for this.

This patch also reverts 'drm/amdgpu: race issue when jobs on 2 ring timeout'
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74119.html

Since we serialize all resets no need to protect from concurrent
resets.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74115.html

Use reset domain wq also for non TDR gpu recovery trigers
such as sysfs and RAS. We must serialize all possible
GPU recoveries to gurantee no concurrency there.
For TDR call the original recovery function directly since
it's already executed from within the wq. For others just
use a wrapper to qeueue work and wait on it to finish.

v2: Rename to amdgpu_recover_work_struct
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74113.html

Before we initialize schedulers we must know which reset
domain are we in - for single device there iis a single
domain per device and so single wq per device. For XGMI
the reset domain spans the entire XGMI hive and so the
reset wq is per hive.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74112.html

Defined a reset_domain struct such that
all the entities that go through reset
together will be serialized one against
another. Do it for both single device and
XGMI hive cases.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: NChristian König <ckoenig.leichtzumerken@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74111.html

'linux/pci.h' included in 'amdgpu_device.c' is duplicated.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NChangcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new CTX ioctl operation to set stable pstates for profiling.
When creating traces for tools like RGP or using SPM or doing
performance profiling, it's required to enable a special
stable profiling power state on the GPU.  These profiling
states set fixed clocks and disable certain other power
features like powergating which may impact the results.

Historically, these profiling pstates were enabled via sysfs,
but this adds an interface to enable it via the CTX ioctl
from the application.  Since the power state is global
only one application can set it at a time, so if multiple
applications try and use it only the first will get it,
the ioctl will return -EBUSY for others.  The sysfs interface
will override whatever has been set by this interface.

Mesa MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207

v2: don't default r = 0;
v3: rebase on Evan's PM cleanup
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
In rmmod procedure, kfd sends cp a dequeue request, but the
request does not get response, then an error message "cp
queue pipe 4 queue 0 preemption failed" printed.

[how]
Performing kfd suspending after disabling gfxoff can fix it.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NYang Wang <kevinyang.wang@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>