Use the request's '->mq_hctx->queue_num' directly to simplify the
nvme_req_qid() function.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.

Fixes: 1293477f ("nvme: set gendisk read only based on nsattr")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChao Leng <lengchao@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChao Leng <lengchao@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.

To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.

To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Multiple CPUs may be mapped to the same hctx, allowing mulitple
submission contexts to attempt commit_rqs(). We need to verify we're
not writing the same doorbell value multiple times since that's a spec
violation.

Revert commit 54b2fcee.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878596Reported-by: N"B.L. Jones" <brandon.gustav@googlemail.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().

In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.

Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.

Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.comReported-and-tested-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec53 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: NJack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

__nvme_fc_terminate_io() is now called by only 1 place, in reset_work.
Consoldate and move the functionality of terminate_io into reset_work.

In reset_work, rather than calling the create_association directly,
schedule the connect work element to do its thing. After scheduling,
flush the connect work element to continue with semantic of not
returning until connect has been attempted at least once.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvme_fc_error_recovery() special cases handling when in CONNECTING state
and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself
special cases CONNECTING state and calls the routine to abort outstanding
ios.

Simplify the sequence by putting the call to abort outstanding I/Os
directly in nvme_fc_error_recovery.

Move the location of __nvme_fc_abort_outstanding_ios(), and
nvme_fc_terminate_exchange() which is called by it, to avoid adding
function prototypes for nvme_fc_error_recovery().
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

err_work was created to handle errors (mainly I/O timeouts) while in
CONNECTING state. The flag for err_work_active is also unneeded.

Remove err_work_active and err_work.  The actions to abort I/Os are moved
inline to nvme_error_recovery().
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Whenever there are errors during CONNECTING, the driver recovers by
aborting all outstanding ios and counts on the io completion to fail them
and thus the connection/association they are on.  However, the connection
failure depends on a failure state from the core routines.  Not all
commands that are issued by the core routine are guaranteed to cause a
failure of the core routine. They may be treated as a failure status and
the status is then ignored.

As such, whenever the transport enters error_recovery while CONNECTING,
it will set a new flag indicating an association failed. The
create_association routine which creates and initializes the controller,
will monitor the state of the flag as well as the core routine error
status and ensure the association fails if there was an error.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Receiving a zero length message leads to the following warnings because
the CQE is processed twice:

refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28

RIP: 0010:refcount_warn_saturate+0xd9/0xe0
Call Trace:
 <IRQ>
 nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma]
 __ib_process_cq+0x76/0x150 [ib_core]
 ...

Sanity check the received data length, to avoids this.

Thanks to Chao Leng & Sagi for suggestions.
Signed-off-by: Nzhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Revalidating nvme zoned namespaces requires IO commands, and there are
controller states that prevent IO. For example, a sanitize in progress
is required to fail all IO, but we don't want to remove a namespace
we've previously added just because the controller is in such a state.
Suppress the error in this case.
Reported-by: NMichael Nguyen <michael.nguyen@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We've had several complaints about a 10s reconnect delay (the default)
when there was an error while there is connectivity to a subsystem.
The max_reconnects and reconnect_delay are set in common code prior to
calling the transport to create the controller.

This change checks if the default reconnect delay is being used, and if
so, it adjusts it to a shorter period (2s) for the nvme-fc transport.
It does so by calculating the controller loss tmo window, changing the
value of the reconnect delay, and then recalculating the maximum number
of reconnect attempts allowed.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

On reconnect, the code currently does not freeze the controller before
possibly updating the number hw queues for the controller.

Add the freeze before updating the number of hw queues.  Note: the queues
are already started and remain started through the reconnect.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The loop that backs out of hw io queue creation continues through index
0, which corresponds to the admin queue as well.

Fix the loop so it only proceeds through indexes 1..n which correspond to
I/O queues.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently, an I/O timeout unconditionally invokes
nvme_fc_error_recovery() which checks for LIVE or CONNECTING state.  If
live, the routine resets the controller which initiates a reconnect -
which is valid.  If CONNECTING, err_work is scheduled.  Err_work then
calls the terminate_io routine, which also checks for CONNECTING and
noops any further action on outstanding I/O.  The result is nothing
happened to the timed out io.  As such, if the command was dropped on
the wire, it will never timeout / complete, and the connect process
will hang.

Change the behavior of the io timeout routine to unconditionally abort
the I/O.  I/O completion handling will note that an io failed due to an
abort and will terminate the connection / association as needed.  If the
abort was unable to happen, continue with a call to
nvme_fc_error_recovery(). To ensure something different happens in
nvme_fc_error_recovery() rework it so at it will abort all I/Os on the
association to force a failure.

As I/O aborts now may occur outside of delete_association, counting for
completion must be wary and only count those aborted during
delete_association when TERMIO is set on the controller.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Like commit 5611ec2b ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), Sandisk Skyhawk has the same issue:
[ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0

So also disable Write Zeroes command on Sandisk Skyhawk.

BugLink: https://bugs.launchpad.net/bugs/1899503Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

A crash happened due to injecting error test.
When a CQE has incorrect command id due do an error injection, the host
may find a request which is already freed.  Dereferencing req->mr->rkey
causes a crash in nvme_rdma_process_nvme_rsp because the mr is already
freed.

Add a check for the mr to fix it.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

A crash can happened when a connect is rejected.   The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command.  If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.

Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event.  Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request.  A crash happenes due to use after free in
nvme_rdma_complete_rq.

nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Translate zoned resource errors to the appropriate blk_status_t.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In nvme_set_queue_limits() we initialize vwc to false and later add
a condition to set vwc true. The value of the vwc can be declare
initialized which makes all the blk_queue_XXX() calls uniform.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In nvme_validate_ns() the exra variable ctrl is used only twice.
Using ns->ctrl directly still maintains the redability and original
length of the lines in the code. Get rid of the extra variable ctrl &
use ns->ctrl directly.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Just fold it into the only caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Move the logic to revalidate the block_device size or remove the
namespace from the caller into nvme_validate_ns.  This removes
the return value and thus the status code translation.  Additionally
it also catches non-permanent errors from nvme_update_ns_info using
the existing logic.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Move nvme_validate_ns just above its only remaining caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Check the namespace identifier list first thing when scanning namespaces.
This keeps the code to query the CSI common between the alloc and validate
path, and helps to structure the code better for multiple command set
support.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Consolidate the two calls into a single place.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>

Now that the queue is frozen before updating ->lba_shift we can't hit the
invalid references mentioned in the comment any more.  More importantly
this code would not have helped us if the format was changed by another
controller or through implementation defined back channels.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

A Format NVM command can change the capabilities of namespaces, while
Sanitize does change the Logical Block Content and must be serialized.

Also remove CSUPP bit for Format - it is not a mandatory command,
and we don't check for the bit anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Only set the queue limits once we have the real block size.  This also
updates the limits on a rescan if needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

We can no longer reach this code if Identify Namespace failed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Use a single statement to set both the capacity and fake block size
instead of two.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>

Ensure that there can't be any I/O in flight went we change the disk
geometry in nvme_update_ns_info, most notable the LBA size by lifting
the queue free from nvme_update_disk_info into the caller
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Factor out a helper from nvme_update_ns_info that configures the
per-namespaces metadata and PI settings.  Also make sure the helpers
clear the flags explicitly instead of all of ->features to allow for
potentially reusing ->features for future non-metadata flags.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Check if the namespace actually exists as the very first thing and don't
bother with any extra work if not.  This should speed up and simplify
the sequential scanning for NVMe 1.0 devices.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Move the check from the two callers into the common helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>