Clean up device type checking.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NKrzysztof Blaszkowski <krzysztof.blaszkowski@intel.com>
Signed-off-by: NTymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes an Oops on device unbind, when the device is used
by a PSM user process. PSM processes access device resources which
are freed on device removal. Similar protection exists in uverbs
in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence
a separate protection is required for PSM clients.

Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Prevent setting up integrity check flags when module is loaded
with NO_INTEGRITY capability.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The IRQ affinity entry is not needed after the irq notifier patch has been
added to the hfi1 driver.
The irq affinity settings for SDMA engine should be set using the standard
/proc/irq/<N>/ interface.
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The length is incorrect, causing the trace data to
be truncated.

Add the additional 8 bytes that should have been there.
Also trace out the atomic ack in hex to aid debugging.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix "unsupported method" error by skipping ingress pkey checks on
response SMA packets.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver will now try to read directly from the EPROM as its
first choice for the platform configuration file.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add a function to read the platform configuration file from
the EPROM.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Partially revert commit d0790317 ("IB/hfi1: Remove
EPROM functionality from data device"), bringing back
the ability to read from the EPROM.

This code will be used for driver-only acccess to the EPROM, hence
change EPROM read to save to a buffer instead of copy touser. Also
allow any offset and remove missed includes and leftover declarations.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add a debugfs sdma_cpu_list file that can be used to examine the CPU to
sdma engine assignments for the whole device.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds an irq affinity notification handler.
When a user changes interrupt affinity settings for an sdma engine,
the driver needs to make changes to its internal sde structures and
also update the affinity_hint.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds a read-only "VL" attribute for the sysfs entry of each
sdma engine. It will allow the user to check VL to sdma engine mappings.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some users want more control over which cpu cores are being used by the
driver. For example, users might want to restrict the driver to some
specified subset of the cores so that they can appropriately partition
processes, irq handlers, and work threads.
To allow the user to fine tune system affinity settings new sysfs
attributes are introduced per sdma engine.  This patch adds a new
attribute type for sdma engine and a new cpu_list attribute.
When the user writes a cpu range to the cpu_list attribute the driver
will create an internal cpu->sdma map, which will be used later as a
look-up table to choose an optimal engine for a user requests.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Correct resource free in allocate_ctxt() function.
When context creation fails allocated resources are properly
released and pointer in receive context data table is set back
to NULL.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We no longer use an error tasklet. Remove it from the hfi1_devdata
structure.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code no longer uses tasklets for the send engine. However it does
use a tasklet for sdma but the send routines use a workqueue now days.
Update the comments to reflect that. Make things more generic with
saying "send engine" because that is what is being referred to.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It was determined that 0x880 is a better value for hardware buffering,
use it.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add missing external device timeout notification.  Recognize
it as a failed LNI signal from the 8051 firmware.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is a a bug in defered ack stuff that causes a race with the
destroy of a QP.

A packet causes a defered ack to be pended by putting the QP
into an rcd queue.

A return from the driver interrupt processing will process that rcd
queue of QPs and attempt to do a direct send of the ack.   At this
point no locks are held and the above QP could now be put in the reset
state in the qp destroy logic.   A refcount protects the QP while it
is in the rcd queue so it isn't going anywhere yet.

If the direct send fails to allocate a pio buffer,
hfi1_schedule_send() is called to trigger sending an ack from the
send engine. There is no state test in that code path.

The refcount is then dropped from the driver.c caller
potentially allowing the qp destroy to continue from its
refcount wait in parallel with the workqueue scheduling of the qp.

Cc: stable@vger.kernel.org
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Prevent over-reading the SGE length by using byte
reads for non quad-word reads.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In certain cases, if the tail of an SGE is not
8-byte aligned, bytes beyond the end to an 8-byte
alignment can be read. Change the copy routine
to avoid the over-read. Instead, stop on the final
whole quad-word, then read the remaining bytes.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow a longer timeout for i2c due to clock stretching and
inaccurate jiffy timing when under a spin lock.  This timeout
is consistent with other i2c-algo-bit users.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ib_write_bw test allows using up to 16384 QPs. When a relatively
large number of QPs (within that range) is used, the test can fail
because the number of CQ entries needed exceeds the limit set by the
driver.

This patch increases the default setting of max_cqes from 0x2FFFF
(196607) to 0x2FFFFF(3145727), which is sufficient to cover the
maximum number needed by the ib_write_bw test (2097152). The default
setting of max_qps is also increased from 16384 to 32768 to allow
the test to run successfully with 16383 or 16384 QPs.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The FM should have full control to set the pkeys in the
driver pkey table. Remove filtering done by the driver.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This allows for adding additional pages of adaptive pio
opcode control including manufacturer specific ones.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds lockdep asserts in key code paths for
insuring lock correctness.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The call is misplaced in the reset calldown function
and causes issues with lockdep assertions that are to
be added.

Fixes: Commit a2c2d608 ("staging/rdma/hfi1: Remove create_qp functionality")
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Existing locking scheme in affinity.c file using the
&node_affinity.lock spinlock is not very elegant.
We acquire the lock to get hfi1_affinity_node entry,
unlock, and then use the entry without the lock held.
With more functions being added, which access and
modify the entries, this can lead to race conditions.
This patch makes this locking scheme more consistent.
It changes the spinlock to mutex. Since all the code
is executed in a user process context there is no need
for a spinlock. This also allows to keep the lock
not only while we look up for the node affinity entry,
but over the whole section where the entry is being used.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The dma_XXX API functions return bus addresses which are
physical addresses when IOMMU is disabled. Buffer
mapping to user-space is done via remap_pfn_range() with PFN
based on bus address instead of physical. This results in
wrong pages being mapped to user-space when IOMMU is enabled.
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NTymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: NAndrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Each user SDMA request coming into the driver may contain multiple packets.
Each user packet may use multiple SDMA descriptors to fill the send buffer.
The field seqsubmitted in struct user_sdma_request counts the number of
user packets submitted to an SDMA engine. Sometimes, the intermediate count
may not be updated properly. However, once all the packets' descriptors
are successfully submitted to the SDMA engine, the final count is updated
correctly. But, if only some of the packets are submitted to the engine due
to an error, the intermediate count doesn't reflect the partial number of
packets submitted to the SDMA engine. This can cause a hang later in the
code as the count of packets submitted to the SDMA engine doesn't match the
the count of packets processed by the SDMA engine.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

All calls to tune_serdes and start_link are paired.  Move
tune_serdes inside start_link.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use common header file structs, defines, and accessors
in the drivers.  The old declarations are removed.

The repositioning of the includes allows for the removal
of hfi1_message_header and replaces its use with ib_header.

Also corrected are two issues with set_armed_to_active():
- The "packet" parameter is now a pointer as it should have been
- The etype is validated to insure that the header is correct
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This improves readability and hides the reference count
mechanism from the client drivers.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The debugfs RCU trips many debug kernel warnings because of potential
sleeps with an RCU read lock held. This includes both user copy calls
and slab allocations throughout the file.

This patch switches the RCU to use SRCU for file remove/access
race protection.

In one case, the SRCU is implicit in the use of the raw debugfs file
object and just works.

In the seq_file case, a wrapper around seq_read() and seq_lseek() is
used to enforce the SRCU using the debugfs supplied functions
debugfs_use_file_start() and debugfs_use_file_stop().

The sychronize_rcu() is deleted since the SRCU prevents the remove
access race.

The RCU locking is kept for qp_stats since the QP hash list is
protected using the non-sleepable RCU.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The global variable n_krcvqs stores the sum of the number of kernel
receive queues of VLs 0-7 which the user can pass to the driver through
the module parameter array krcvqs which is of type unsigned integer. If
the user passes large value(s) into krcvqs parameter array, it can cause
an arithmetic overflow while calculating n_krcvqs which is also of type
unsigned int. The overflow results in an incorrect value of n_krcvqs
which can lead to kernel crash while loading the driver.

Fix by changing the data type of n_krcvqs to unsigned long. This patch
also changes the data type of other variables that get their values from
n_krcvqs.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Sometimes a QSFP device does not respond in the expected time
after a power-on.  Add a read pre-check/retry when starting
the link on driver load.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the set_txreq_header_ahg(), The KDETH Intr bit is obtained from the
header in the user sdma request using a KDETH_GET shift and mask macro.
This value is then futher right shifted by 16 causing us to lose the
value i.e it is shifted to zero, leading to the following
smatch warning:
drivers/infiniband/hw/hfi1/user_sdma.c:1482 set_txreq_header_ahg()
warn: mask and shift to zero

The Intr bit should be left shifted into its correct position in the
KDETH header before the AHG update.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When trying to align the source pointer and there's a byte carry
in an SGE copy, bytes are borrowed from the next quad-word X to
complete the required quad-word copy. Then, the SGE length is
reduced by the number of borrowed bytes. After this, if the
remaining number of bytes from quad-word X (extra bytes) is
greater than the new SGE length, the number of extra bytes needs
to be updated to the new SGE length. Otherwise, when the
SGE length gets updated again after the extra bytes are read to
create the new byte carry, it goes negative, which then becomes
a very large number as the SGE length is an unsigned integer.
This causes SGE buffer to be over-read.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The 2nd parameter of 'find_first_bit' is the number of bits to search.
In this case, we are passing 'sizeof(u64)' which is 8.

It is likely that the number of bits of 'port_mask' was expected here.
Use sizeof() * 8 to get the correct number.

It has been spotted by the following coccinelle script:
@@
expression ret, x;

@@
*  ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...));
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>