* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] skcipher: Fix section mismatches

This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().

It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: NBob Tracy <rct@frus.com>
Acked-by: NFUJITA Tomonori <tomof@acm.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.

This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning.  The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.

This solves the hung reboot regression reported by Andrew Morton and
others.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit ee7c82da ("wait_task_stopped:
simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short)
cast when storing si_code was lost in wait_task_stopped.  This leaks the
in-kernel CLD_* values that do not match what userland expects.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch to move chainiv and eseqiv into blkcipher created
a section mismatch for the chainiv exit function which was also called
from __init.  This patch removes the __exit marking on it.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a
32-bit task sign-extend the low 32 bits up to 64.  This matches what a
64-bit debugger expects when tracing a 32-bit task.

This follows on my "x86_64 ia32 syscall restart fix".  This didn't
matter until that was fixed.

The debugger ignores or zeros the high half of every register slot it
sets (including the orig_rax pseudo-register) uniformly.  It expects
that the setting of the low 32 bits always has the same meaning as a
32-bit debugger setting those same 32 bits with native 32-bit
facilities.

This never arose before because the syscall restart check never
matched any -ERESTART* values due to lack of sign extension.  Before
that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger
the restart check anyway.  So this was never noticed as a regression
of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel.
Signed-off-by: NRoland McGrath <roland@redhat.com>
[ Changed to just do the sign-extension unconditionally on x86-64,
  since orig_ax is always just a small integer and doesn't need
  the full 64-bit range ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds another Broadcom BCM2045 based device to the blacklist, with
these settings the micro dongle works on my system.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
  slub: fix typo in Documentation/vm/slub.txt
  slab: NUMA slab allocator migration bugfix
  slub: Do not cross cacheline boundaries for very small objects
  slab - use angle brackets for include of kmalloc_sizes.h
  slab numa fallback logic: Do not pass unfiltered flags to page allocator
  slub statistics: Fix check for DEACTIVATE_REMOTE_FREES

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: update references to Documentation/ide/ide.txt (v2)
  ide: move ide.txt to Documentation/ide/
  ide: fix buggy code in ide_register_hw()
  ide: fix enabling DMA on it821x in "smart" mode
  ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Relocating the index to come after finding the hwif pointer.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_tune_dma() should return '1' if IDE_HFLAG_NO_SET_MODE host flag is set.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Thursday 06 March 2008, walt wrote:

> For me, this commit causes the problem it's intended to fix:
> 
> commit 9f10d9ee
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date:   Tue Feb 26 21:50:35 2008 +0100
> 
>      ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests
> 
>      This fixes some hangs caused by not finishing the transfer before ending
>      the request and also makes use of 'ireason == 1' quirk for spurious IRQs.
> 
> When I mount a CD there is a long delay, and I see this error message:
> 
> hdc: ide_cd_check_ireason: wrong transfer direction!
> cdrom: failed setting lba address space
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hdc: drive not ready for command
> <repeated many times>
> 
> When I revert this commit everything works properly again, including
> CD burning.

It turned out that REQ_TYPE_ATA_PC write requests were not marked as such
(the previous commit assumed them to be).
Reported-by: Nwalt <w41ter@gmail.com>
Tested-by: Nwalt <w41ter@gmail.com>
Reviewed-by: NBorislav Petkov <petkovbb@googlemail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
  NFS: Fix the fsid revalidation in nfs_update_inode()
  SUNRPC: Fix a nfs4 over rdma transport oops
  NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c

As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prevent an RPC oops when freeing a dynamically allocated RDMA
buffer, used in certain special-case large metadata operations.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NJames Lentini <jlentini@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

O_SYNC is stored in filp->f_flags.
Thanks to Al Viro for pointing out the bug.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The card state mutex was only initialized when a device was connected,
but used during unload unconditionally, leading to an Oops if a driver
was loaded and unloaded again without ever connecting a device.

Fix this by initializing the mutex as soon as the structure is allocated.
Also add a missing mutex unlock revealed in the same execution path.

This fixes a possible Oops in 2.6.25-rc that was introduced by commit
e468c048 ("Gigaset: permit module
unload").

Thanks to Roland Kletzing for reporting this problem.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Tested-by: NRoland Kletzing <devzero@web.de>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: don't allow rt_runtime_us to be zero for groups having rt tasks
  sched: rt-group: fixup schedulability constraints calculation
  sched: fix the wrong time slice value for SCHED_FIFO tasks
  sched: export task_nice
  sched: balance RT task resched only on runqueue
  sched: retain vruntime

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86-boot: don't request VBE2 information
  x86: re-add reboot fixups
  x86: fix typo in step.c
  x86: fix merge mistake in i387.c
  x86: clear DF before calling signal handler

randconfig testing found a bootup lockup in drivers/char/esp.c because
of a spinlock that wasn't correctly initialized.

I'm not sure why it became more prominent in 2.6.25-rc4, the bug seems
rather old and i've been doing allyesconfig bootups for ages with
CONFIG_ESP enabled.

This fixes this bootup lockup:

 PM: Adding info for No Bus:ttyP63
 ttyP32 at 0x0240 (irq = 0) is an ESP primary port
 BUG: spinlock lockup on CPU#0, swapper/1, f56dd004
 Pid: 1, comm: swapper Not tainted 2.6.25-rc4-sched-devel.git-x86-latest.git #402 [<c03ac6f4>] _raw_spin_lock+0x134/0x140
  [<c08649be>] _spin_lock_irqsave+0x5e/0x80
  [<c0b9fbfe>] ? espserial_init+0x2be/0x6e0
  [<c0b9fbfe>] espserial_init+0x2be/0x6e0
  [<c0b877a3>] kernel_init+0x83/0x260
  [<c0b9f940>] ? espserial_init+0x0/0x6e0
  [<c010416a>] ? restore_nocheck_notrace+0x0/0xe
  [<c0b87720>] ? kernel_init+0x0/0x260
  [<c0b87720>] ? kernel_init+0x0/0x260
  [<c0104507>] kernel_thread_helper+0x7/0x10
  =======================

kzalloc() is not the way to initialize spinlocks anymore.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch checks if we can set the rt_runtime_us to 0. If there is a
realtime task in the group, we don't want to set the rt_runtime_us as 0
or bad things will happen. (that task wont get any CPU time despite
being TASK_RUNNNG)
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

it was only possible to configure the rt-group scheduling parameters
beyond the default value in a very small range.

that's because div64_64() has a different calling convention than
do_div() :/

fix a few untidies while we are here; sysctl_sched_rt_period may overflow
due to that multiplication, so cast to u64 first. Also that RUNTIME_INF
juggling makes little sense although its an effective NOP.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Function sys_sched_rr_get_interval returns wrong time slice value for
SCHED_FIFO tasks. The time slice for SCHED_FIFO tasks should be 0.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The API is trivial, and so is the implementation.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sripathi Kodi reported a crash in the -rt kernel:

  https://bugzilla.redhat.com/show_bug.cgi?id=435674

this is due to a place that can reschedule a task without holding
the tasks runqueue lock.  This was caused by the RT balancing code
that pulls RT tasks to the current run queue and will reschedule the
current task.

There's a slight chance that the pulling of the RT tasks will release
the current runqueue's lock and retake it (in the double_lock_balance).
During this time that the runqueue is released, the current task can
migrate to another runqueue.

In the prio_changed_rt code, after the pull, if the current task is of
lesser priority than one of the RT tasks pulled, resched_task is called
on the current task. If the current task had migrated in that small
window, resched_task will be called without holding the runqueue lock
for the runqueue that the task is on.

This race condition also exists in the mainline kernel and this patch
adds a check to make sure the task hasn't migrated before calling
resched_task.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Tested-by: NSripathi Kodi <sripathik@in.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Kei Tokunaga reported an interactivity problem when moving tasks
between control groups.

Tasks would retain their old vruntime when moved between groups, this
can cause funny lags. Re-set the vruntime on group move to fit within
the new tree.
Reported-by: NKei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The new x86 setup code (4fd06960) broke booting on an old P3/500MHz
with an onboard Voodoo3 of mine. After debugging it, it turned out
to be caused by the fact that the vesa probing now asks for VBE2 data.

Disassembing the video BIOS shows that it overflows the vesa_general_info
structure when VBE2 data is requested because the source addresses for the
information strings which get strcpy'ed to the buffer lie outside the 32K
BIOS code (and hence contain long sequences of 0xff's).

E.G.:

get_vbe_controller_info:
00002A9C  60                pushaw
00002A9D  1E                push ds
00002A9E  0E                push cs
00002A9F  1F                pop ds
00002AA0  2BC9              sub cx,cx
00002AA2  6626813D56424532  cmp dword [es:di],0x32454256 ; "VBE2"
00002AAA  7501              jnz .1
00002AAC  41                inc cx
.1:
00002AAD  51                push cx
00002AAE  B91400            mov cx,0x14
00002AB1  BED47F            mov si, controller_header
00002AB4  57                push di
00002AB5  F3A4              rep movsb ; copy vbe1.2 header

00002AB7  B9EC00            mov cx,0xec
00002ABA  2AC0              sub al,al
00002ABC  F3AA              rep stosb ; zero pad remainder

00002ABE  5F                pop di
00002ABF  E8EB0D            call word get_memory
00002AC2  C1E002            shl ax,0x2
00002AC5  26894512          mov [es:di+0x12],ax ; total memory
00002AC9  26C745040003      mov word [es:di+0x4],0x300 ; VBE version
00002ACF  268C4D08          mov [es:di+0x8],cs
00002AD3  268C4D10          mov [es:di+0x10],cs
00002AD7  59                pop cx
00002AD8  E361              jcxz .done ; VBE2 requested?
00002ADA  8D9D0001          lea bx,[di+0x100]
00002ADE  53                push bx
00002ADF  87DF              xchg bx,di ; di now points to 2nd half
00002AE1  26C747140001      mov word [es:bx+0x14],0x100 ; sw rev

00002AE7  26897F06          mov [es:bx+0x6],di		; oem string
00002AEB  268C4708          mov [es:bx+0x8],es
00002AEF  BE5280            mov si,0x8052 ; oem string
00002AF2  E87A1B            call word strcpy

00002AF5  26897F0E          mov [es:bx+0xe],di ; video mode list
00002AF9  268C4710          mov [es:bx+0x10],es
00002AFD  B91E00            mov cx,0x1e
00002B00  BEE87F            mov si,vidmodes
00002B03  F3A5              rep movsw

00002B05  26897F16          mov [es:bx+0x16],di ; oem vendor
00002B09  268C4718          mov [es:bx+0x18],es
00002B0D  BE2480            mov si,0x8024 ; oem vendor
00002B10  E85C1B            call word strcpy

00002B13  26897F1A          mov [es:bx+0x1a],di ; oem product
00002B17  268C471C          mov [es:bx+0x1c],es
00002B1B  BE3880            mov si,0x8038 ; oem product
00002B1E  E84E1B            call word strcpy

00002B21  26897F1E          mov [es:bx+0x1e],di ; oem product rev
00002B25  268C4720          mov [es:bx+0x20],es
00002B29  BE4580            mov si,0x8045 ; oem product rev
00002B2C  E8401B            call word strcpy

00002B2F  58                pop ax
00002B30  B90001            mov cx,0x100
00002B33  2BCF              sub cx,di
00002B35  03C8              add cx,ax
00002B37  2AC0              sub al,al
00002B39  F3AA              rep stosb ; zero pad
.done:
00002B3B  1F                pop ds
00002B3C  61                popaw
00002B3D  B84F00            mov ax,0x4f
00002B40  C3                ret

(The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin
if interested).

The old setup code didn't ask for VBE2 info, and the new code doesn't
actually do anything with the extra information, so the fix is to simply
not request it. Other BIOS'es might have the same problem.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Jan Beulich noticed that the reboot fixups went missing during
reboot.c unification.

(commit 4d022e35)

Geode and a few other rare boards with special reboot quirks are
affected.
Reported-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

TIF_DEBUGCTLMSR has no meaning in the actual MSR...
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

convert_fxsr_to_user() in 2.6.24's i387_32.c did this, and
convert_to_fxsr() also does the inverse, so I assume it's an oversight
that it is no longer being done.

[ mingo@elte.hu:

  we encode it this way because there's no space for the 'FPU Last
  Instruction Opcode' (->fop) field in the legacy user_i387_ia32_struct
  that PTRACE_GETFPREGS/PTRACE_SETFPREGS uses.

  it's probably pure legacy - i'd be surprised if any user-space relied on
  the FPU Last Opcode in any way. But indeed we used to do it previously
  so the most conservative thing is to preserve that piece of information.
]
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The Linux kernel currently does not clear the direction flag before
calling a signal handler, whereas the x86/x86-64 ABI requires that.

Linux had this behavior/bug forever, but this becomes a real problem
with gcc version 4.3, which assumes that the direction flag is
correctly cleared at the entry of a function.

This patches changes the setup_frame() functions to clear the
direction before entering the signal handler.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NH. Peter Anvin <hpa@zytor.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25:
  sh: Fix up the sh64 build.
  sh: Fix up SH7710 VoIP-GW build.
  sh: Flag PMB support as EXPERIMENTAL.
  sh: Update r7780mp defconfig.
  fb: hitfb: Balance probe/remove section annotations.
  sh: hp6xx: Fix up hp6xx_apm build failure.
  fb: pvr2fb: Fix up remaining section mismatch.
  sh: Fix up section mismatches.
  sh: hp6xx: Correct APM output.
  sh: update se7780 defconfig
  sh: replace remaining __FUNCTION__ occurrences
  sh: export copy-page() to modules
  sh_ksyms_32.c update for gcc 4.3
  sh/mm/pg-sh7705.c must #include <linux/fs.h>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  [Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0
  [Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markings
  [Blackfin] arch: fix bug - allow SDH driver to be used as module
  [Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscalls

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kprobes arch consolidation build fix
  [IA64] update efi region debugging to use MB, GB and TB as well as KB
  [IA64] use dev_printk in video quirk
  [IA64] remove remaining __FUNCTION__ occurrences
  [IA64] remove unnecessary nfs includes from sys_ia32.c
  [IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()
  [IA64] arch_ptrace() cleanup
  [IA64] remove duplicate code from arch_ptrace()
  [IA64] convert sys_ptrace to arch_ptrace
  [IA64] remove find_thread_for_addr()
  [IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM
  [IA64] access user RBS directly

slub_debug=,dentry is correct, not dentry_cache.
Signed-off-by: NItaru Kitayama <i-kitayama@ap.jp.nec.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>

NUMA slab allocator cpu migration bugfix

The NUMA slab allocator (specifically, cache_alloc_refill)
is not refreshing its local copies of what cpu and what
numa node it is on, when it drops and reacquires the irq
block that it inherited from its caller.  As a result
those values become invalid if an attempt to migrate the
process to another numa node occured while the irq block
had been dropped.

The solution is to make cache_alloc_refill reload these
variables whenever it drops and reacquires the irq block.

The error is very difficult to hit.  When it does occur,
one gets the following oops + stack traceback bits in
check_spinlock_acquired:

	kernel BUG at mm/slab.c:2417
	cache_alloc_refill+0xe6
	kmem_cache_alloc+0xd0
	...

This patch was developed against 2.6.23, ported to and
compiled-tested only against 2.6.25-rc4.
Signed-off-by: NJoe Korty <joe.korty@ccur.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>

SLUB should pack even small objects nicely into cachelines if that is what
has been asked for. Use the same algorithm as SLAB for this.

The effect of this patch for a system with a cacheline size of 64
bytes is that the 24 byte sized slab caches will now put exactly
2 objects into a cacheline instead of 3 with some overlap into
the next cacheline. This reduces the object density in a 4k slab
from 170 to 128 objects (same as SLAB).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>