- 20 7月, 2012 3 次提交
-
-
由 stephen hemminger 提交于
The Ethernet II wrapper is only used by IPX protocol, may have once been used by Appletalk but not currently. Therefore it makes sense to move it to the IPX dust bin and drop the exports. Build tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket per network namespace. This leads to bad behavior on multiqueue NICS, because many cpus contend for the socket lock and once socket lock is acquired, extra false sharing on various socket fields slow down the operations. To better resist to attacks, we use a percpu socket. Each cpu can run without contention, using appropriate memory (local node) Additional features : 1) We also mirror the queue_mapping of the incoming skb, so that answers use the same queue if possible. 2) Setting SOCK_USE_WRITE_QUEUE socket flag speedup sock_wfree() 3) We now limit the number of in-flight RST/ACK [1] packets per cpu, instead of per namespace, and we honor the sysctl_wmem_default limit dynamically. (Prior to this patch, sysctl_wmem_default value was copied at boot time, so any further change would not affect tcp_sock limit) [1] These packets are only generated when no socket was matched for the incoming packet. Reported-by: NBill Sommerfeld <wsommerfeld@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Use global seqlock for the nh_exceptions. Call fnhe_oldest with the right hash chain. Correct the diff value for dst_set_expires. v2: after suggestions from Eric Dumazet: * get rid of spin lock fnhe_lock, rearrange update_or_create_fnhe * continue daddr search in rt_bind_exception v3: * remove the daddr check before seqlock in rt_bind_exception * restart lookup in rt_bind_exception on detected seqlock change, as suggested by David Miller Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 7月, 2012 8 次提交
-
-
由 David S. Miller 提交于
Reported-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
ip_options_compile can be called for forwarded packets, make sure the specific-destionation address is a local one as specified in RFC 1812, 4.2.2.2 Addresses in Options Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Move fib_compute_spec_dst at the only place where it is needed. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krishna Kumar 提交于
Use correct allocation flags during copy of user space fragments to the kernel. Also "improve" couple of for loops. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saurabh 提交于
New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: NSaurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saurabh 提交于
Incorporated David and Steffen's comments. Add hook for rx-path xfmr4_mode_tunnel for VTI tunnel module. Signed-off-by: NSaurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Followup of commit 0c24604b (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by: NVijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NVijay Subramanian <subramanian.vijay@gmail.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2012 4 次提交
-
-
由 Eric Dumazet 提交于
We should provide to inet6_csk_route_socket a struct flowi6 pointer, so that net6_csk_xmit() works correctly instead of sending garbage. Also add some consts Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NYuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
free_nh_exceptions() should use rcu_dereference_protected(..., 1) since its called after one RCU grace period. Also add some const-ification in recent code. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Need to mask it with (FNHE_HASH_SIZE - 1). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2012 15 次提交
-
-
由 David S. Miller 提交于
In a regime where we have subnetted route entries, we need a way to store persistent storage about destination specific learned values such as redirects and PMTU values. This is implemented here via nexthop exceptions. The initial implementation is a 2048 entry hash table with relaiming starting at chain length 5. A more sophisticated scheme can be devised if that proves necessary. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Wei 提交于
We need to check the passed in multicast address and return appropriate errno(EINVAL) if it is not valid. And it's no need to walk through the ipv6_mc_list in this situation. Signed-off-by: NLi Wei <lw@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masanari Iida 提交于
Correct spelling typo in irda. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioan Orghici 提交于
Fix the following sparse warning: * symbol 'sctp_init_cause_fixed' was not declared. Should it be static? Signed-off-by: NIoan Orghici <ioanorghici@gmail.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netem does an early orphaning of skbs. Doing so breaks TCP Small Queue or any mechanism relying on socket sk_wmem_alloc feedback. Ideally, we should perform this orphaning after the rate module and before the delay module, to mimic what happens on a real link : skb orphaning is indeed normally done at TX completion, before the transit on the link. +-------+ +--------+ +---------------+ +-----------------+ + Qdisc +---> Device +--> TX completion +--> links / hops +-> + + + xmit + + skb orphaning + + propagation + +-------+ +--------+ +---------------+ +-----------------+ < rate limiting > < delay, drops, reorders > If netem is used without delay feature (drops, reorders, rate limiting), then we should avoid early skb orphaning, to keep pressure on sockets as long as packets are still in qdisc queue. Ideally, netem should be refactored to implement delay module as the last stage. Current algorithm merges the two phases (rate limiting + delay) so its not correct. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Mark Gordon <msg@google.com> Cc: Andreas Terzis <aterzis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The hash size is doubled when it needs to grow and compared against hash_max. The >= comparison will limit the hash table size to half of what is expected i.e. the default 512 hash_max will not allow the hash table to grow larger than 256. Also print the hash table limit instead of the desirable size when the limit is reached. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Ovsienko 提交于
Userspace implementations of network routing protocols sometimes need to tell RA-originated IPv6 routes from other kernel routes to make proper routing decisions. This makes most sense for RA routes with nexthops, namely, default routes and Route Information routes. The intended mean of preserving RA route origin in a netlink message is through indicating RTPROT_RA as protocol code. Function rt6_fill_node() tried to do that for default routes, but its test condition was taken wrong. This change is modeled after the original mailing list posting by Jeff Haran. It fixes the test condition for default route case and sets the same behaviour for Route Information case (both types use nexthops). Handling of the 3rd RA route type, Prefix Information, is left unchanged, as it stands for interface connected routes (without nexthops). Signed-off-by: NDenis Ovsienko <infrastation@yandex.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
Lenght field should be encoded using big endian byte order, such as intend in the specs. As it is currently written, the len field would not be decoded properly on an implementation using the correct byte ordering. Hence, it could lead to interroperability issues. Also, I rewrote the code so that iphc0 argument of lowpan_alloc_new_frame could be removed. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
The tag field should be stored and accessed using big endian byte order (as intended in the specs). Or else, when displayed with a trafic analyser, such a Wireshark, the field not properly displayed (e.g. 0x01 00 instead of 0x00 01, and so on). Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
When a UDP packet gets fragmented, a crash will occur at reassembly time. This is because skb->transport_header is not set during earlier period of fragment reassembly. As a consequence, call to udp_hdr() return NULL and uh (which is NULL) gets dereferenced without much test. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Vagin 提交于
Before this patch sock_diag works for init_net only and dumps information about sockets from all namespaces. This patch expands sock_diag for all name-spaces. It creates a netlink kernel socket for each netns and filters data during dumping. v2: filter accoding with netns in all places remove an unused variable. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pavel Emelyanov <xemul@parallels.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NAndrew Vagin <avagin@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add three SNMP TCP counters, to better track TCP behavior at global stage (netstat -s), when packets are received Out Of Order (OFO) TCPOFOQueue : Number of packets queued in OFO queue TCPOFODrop : Number of packets meant to be queued in OFO but dropped because socket rcvbuf limit hit. TCPOFOMerge : Number of packets in OFO that were merged with other packets. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2012 3 次提交
-
-
由 David S. Miller 提交于
This adjusts the call to dst_ops->update_pmtu() so that we can transparently handle the fact that, in the future, the dst itself can be invalidated by the PMTU update (when we have non-host routes cached in sockets). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This is the ipv6 version of inet_csk_update_pmtu(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This abstracts away the call to dst_ops->update_pmtu() so that we can transparently handle the fact that, in the future, the dst itself can be invalidated by the PMTU update (when we have non-host routes cached in sockets). So we try to rebuild the socket cached route after the method invocation if necessary. This isn't used by SCTP because it needs to cache dsts per-transport, and thus will need it's own local version of this helper. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2012 7 次提交
-
-
由 Steffen Klassert 提交于
We start initializing the struct xfrm_dst at the first field behind the struct dst_enty. This is error prone because it might leave a new field uninitialized. So start initializing the struct xfrm_dst right behind the dst_entry. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We start initializing the struct rt6_info at the first field behind the struct dst_enty. This is error prone because it might leave a new field uninitialized. So start initializing the struct rt6_info right behind the dst_entry. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
The internal log buffer handling functions can now safely be removed since there is no code using it anymore. Requests to interact with the internal tipc log buffer over netlink (in config.c) will report 'obsolete command'. This represents the final removal of any references to a struct print_buf, and the removal of the struct itself. We also get rid of a TIPC specific Kconfig in the process. Finally, log.h is removed since it is not needed anymore. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Erik Hugne 提交于
The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Erik Hugne 提交于
tipc_printf was previously used both to construct debug traces and to append data to buffers that should be sent over netlink to the tipc-config application. A global print_buffer was used to format the string before it was copied to the actual output buffer. This could lead to concurrent access of the global print_buffer, which then had to be lock protected. This is simplified by changing tipc_printf to append data directly to the output buffer using vscnprintf. With the new implementation of tipc_printf, there is no longer any risk of concurrent access to the internal log buffer, so the lock (and the comments describing it) are no longer strictly necessary. However, there are still a few functions that do grab this lock before resizing/dumping the log buffer. We leave the lock, and these functions untouched since they will be removed with a subsequent commit that drops the deprecated log buffer handling code Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
To pave the way for a pending cleanup of tipc_printf, and removal of struct print_buf entirely, we make that task simpler by converting link_print to issue its messages with standard printk infrastructure. [Original idea separated from a larger patch from Erik Hugne <erik.hugne@ericsson.com>] Cc: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Erik Hugne 提交于
The link queue traces and packet level debug functions served a purpose during early development, but are now redundant since there are other, more capable tools available for debugging at the packet level. The TIPC_DEBUG Kconfig option is removed since it does not provide any extra debugging features anymore. This gets rid of a lot of tipc_printf usages, which will make the pending cleanup work of that function easier. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-