* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits)
  [S390] Fix checkstack for s390
  [S390] fix initialization of stp
  [S390] 3215: Remove tasklet.
  [S390] console flush on panic / reboot
  [S390] introduce dirty bit for kvm live migration
  [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O
  [S390] xpram: per device block request queues.
  [S390] dasd: fix message flood for unsolicited interrupts
  [S390] Move private simple udelay function to arch/s390/lib/delay.c.
  [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.
  [S390] ptrace changes
  [S390] s390: use sys_pause for 31bit pause entry point
  [S390] qdio enhanced SIGA (iqdio) support.
  [S390] cio: fix cio_tpi.
  [S390] cio: Correct use of ! and &
  [S390] cio: inline assembly cleanup
  [S390] bus_id -> dev_set_name() for css and ccw busses
  [S390] bus_id ->dev_name() conversions in qdio
  [S390] Use s390_root_dev_* in kvm_virtio.
  [S390] more bus_id -> dev_name conversions
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
  [CPUFREQ] Don't export governors for default governor
  [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
  [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
  [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
  [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
  [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
  [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
  [CPUFREQ] use deferrable delayed work init in conservative governor
  [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
  [CPUFREQ] add error handling for cpufreq_register_governor() error
  [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c

This patchs defines the number of built-in the GPIOs present
on the SoC as Documentation/gpio.txt recommends to do.
Define irq_to_gpio/gpio_to_irq to return the right values so that
it fixes a compilation error on drivers/gpio/gpiolib.c
when enabling debugfs.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the final part of the watch register patch.  Here we hook up
ptrace so that the user space debugger (gdb), can set and read the
registers.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the scheduler.  Whenever we switch to a new process,
we check to see if the watch registers should be installed, and do it
if needed.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the watch exception handler so that it sends SIGTRAP when
the hardware watch registers are triggered.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Probe for watch register characteristics, and report them in /proc/cpuinfo.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c

This is automatically set for all MIPS32 and MIPS64 processors.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a helper routine to register tx4939ide driver and use it on
RBTX4939 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Based on patch by Chad Reese of Cavium Networks.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

They possibly silence meaningful warnings ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's more than the au1000 these days.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A long for the error value leads to unnecessary sign extensions.  This
patch shrinks an ip27_defconfig kernel build with gcc 4.3.0 by 2256 bytes.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/rbtx4939/Makefile
 create mode 100644 arch/mips/txx9/rbtx4939/irq.c
 create mode 100644 arch/mips/txx9/rbtx4939/prom.c
 create mode 100644 arch/mips/txx9/rbtx4939/setup.c
 create mode 100644 include/asm-mips/txx9/rbtx4939.h

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/pci/pci-tx4939.c
 create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
 create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
 create mode 100644 include/asm-mips/txx9/tx4939.h

Add leds-gpio platform device for controlling LEDs connected to IOC on
RBTX49XX and JMR3927 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The IOC interrupt status register on RBTX49XX only have 8 bits.  Use
8-bit version of __fls() to optimize interrupt handlers.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

TXx9 SoCs have pin multiplex.  Stop some controller modules which can
not be used due to pin configurations.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Routerboard 532 bootloader passes the korina ethernet
MAC adapter address to the kernel on the command line.
Document this in the kernel-parameters file.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch converts the rb532 code to use gpio library
and register its gpio chip.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch removes these two unused functions :
rc32434_sync_delay and rc32434_sync_udelay
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We are no longer using setup_serial_port. So just remove it
from the prom code.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When there is only platform device of the same type, id = -1
should be used, fix this.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch replaces a raw read using volatiles
with a readl.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We are no longer using gpio bootup state, so do not export
it and do not parse the kernel command line tag for it.
Instead we provide gpio-keys for the button the gpio bootup
state was checking.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes the misuse of virtual addresses for the GPIO and third
device controller which would lead to problems while accessing ioremap'd
registers.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch moves GPIO related definitions to gpio.h and IRQ
related to irq.h
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Setup default board_be_handler for TX4927/TX4938.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>