It is debatable whether having an error message on suspend for forcibly
cancelling outstanding work is worthwhile. We want to know if it occurs
in the wild (as we will then have to reconsider the approach!), but
equally is not fatal across suspend, as upon resume we automatically
clear the wedged status.

However, CI does trigger this scenario with gem_eio/suspend; as there we
are intentionally wedging the device upon suspend. The dilemma is how
not to trigger a failure report for the dmesg spam, for which the
quickest response is to suppress the warning in the kernel. I'd rather
mark it as accepted in gem_eio, but for now detecting when gem_eio is
playing games and cancelling the warning for that case seems a barely
acceptable hack.

Testcase: igt/gem_eio/suspend
Reference: 5861b013 ("drm/i915: Do a synchronous switch-to-kernel-context on idling")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308134512.19115-1-chris@chris-wilson.co.uk

The support for PSR2 was polished, IGT tests for PSR2 was added and
it was tested performing regular user workloads like browsing,
editing documents and compiling Linux, so it is time to enable it by
default and enjoy even more power-savings.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-9-jose.souza@intel.com

If PSR1 is active when pipe CRC is enabled the CRC calculations will
be inhibit by the transition to low power states that PSR1 brings.
So lets force a PSR1 exit and as soon as pipe CRC is enabled it will
block PSR1 activation and avoid CRC timeouts when running IGT tests.

There is a little window between the call to force exit PSR and the
write to pipe CRC registers that needs to happen within the minimum
of 6 idles frames otherwise PSR1 will be active again causing the CRC
timeouts but anyways this will at least reduce the occurrence of CRC
timeouts.

This can possibily fix issues present right now but I did not found
any open, I mostly got this issue from previous CI runs of this
series, bellow some exambles:

* igt@kms_color@pipe-b-ctm-0-75:
- shard-apl:          PASS -> FAIL +9

* igt@kms_cursor_legacy@flip-vs-cursor-busy-crc-legacy:
- shard-apl:          PASS -> DMESG-FAIL +17

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt:
- shard-kbl:          PASS -> DMESG-FAIL +12

* igt@kms_pipe_crc_basic@read-crc-pipe-c:
- shard-kbl:          PASS -> FAIL +7

v6: s/PSR/PSR1 (Dhinakaran)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-8-jose.souza@intel.com

All of this checks are redudant and can be removed as the if bellow
already takes care when there is no changes in the state.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-7-jose.souza@intel.com

When PSR2 is active aka after the number of frames programmed in
PSR2_CTL 'Frames Before SU Entry' hardware stops to generate CRC
interrupts causing IGT tests to fail due timeout.

This same behavior don't happen with PSR1, as soon as pipe CRC is
enabled it blocks PSR1 activation so CRC calculation continues to
happens normaly.

This patch also set mode_changed as true when PSR is available to
force atomic check functions to compute new PSR state, otherwise PSR2
would not be disabled.

v4: Only setting mode_changed if has_psr is set(Dhinakaran)

v3: Reusing intel_crtc_crc_prepare() and crc_enabled, only setting
mode_changed if it can do PSR.

v2: Changed commit description to describe that PSR2 inhibit CRC
calculations.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-6-jose.souza@intel.com

Other features like PSR2 also needs to be disabled while getting CRC
so lets rename ips_force_disable to crc_enabled, drop all this checks
for pipe A and HSW and BDW and make it generic and
hsw_compute_ips_config() will take care of all the checks removed
from here.

v2: Renaming and parameter changes to the functions that prepares the
commit (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-5-jose.souza@intel.com

If has_psr is set it means that CRTC has a EDP panel attached so the
EDP check is redundant and can be dropped.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-4-jose.souza@intel.com

In any commit, intel_modeset_pipe_config() will initialilly clear
and then recalculate most of the pipe states but it leave intel
specific color features states in reset state.

If after intel_pipe_config_compare() is detected that a fastset is
possible it will mark update_pipe as true and unsed mode_changed,
causing the color features state to be kept in reset state and then
latter being committed to hardware disabling the color features.

This issue can be reproduced by any code patch that duplicates the
actual(with color features already enabled) state and only mark
mode_changed as true.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-3-jose.souza@intel.com

Forcing a specific CRTC to the eDP connector was causing the
intel_psr_fastset_force() to mark mode_chaged in the wrong and
disabled CRTC causing no update in the PSR state.

Looks like our internal state track do not clear output_types and
has_psr in the disabled CRTCs, not sure if this is the expected
behavior or not but in the mean time this fix the issue.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-2-jose.souza@intel.com

Now we are checking sink capabilities when probing PSR DPCD register
and then dynamically checking in if new state is compatible with PSR
in, so this FIXME can be dropped.
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-1-jose.souza@intel.com

Introduce a mutex to start locking the HW contexts independently of
struct_mutex, with a view to reducing the coarse struct_mutex. The
intel_context.pin_mutex is used to guard the transition to and from being
pinned on the gpu, and so is required before starting to build any
request. The intel_context will then remain pinned until the request
completes, but the mutex can be released immediately unpin completion of
pinning the context.

A slight variant of the above is used by per-context sseu that wants to
inspect the pinned status of the context, and requires that it remains
stable (either !pinned or pinned) across its operation. By using the
pin_mutex to serialise operations while pin_count==0, we can take that
pin_mutex for stabilise the boolean pin status.

v2: for Tvrtko!
* Improved commit message.
* Dropped _gpu suffix from gen8_modify_rpcs_gpu.
v3: Repair the locking for sseu selftests
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-7-chris@chris-wilson.co.uk

Each engine acquires a pin on the kernel contexts (normal and preempt)
so that the logical state is always available on demand. Keep track of
each engines pin by storing the returned pointer on the engine for quick
access.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-6-chris@chris-wilson.co.uk

Push the intel_context pin callback down from intel_engine_cs onto the
context itself by virtue of having a central caller for
intel_context_pin() being able to lookup the intel_context itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-5-chris@chris-wilson.co.uk

In preparation for an ever growing number of engines and so ever
increasing static array of HW contexts within the GEM context, move the
array over to an rbtree, allocated upon first use.

Unfortunately, this imposes an rbtree lookup at a few frequent callsites,
but we should be able to mitigate those by moving over to using the HW
context as our primary type and so only incur the lookup on the boundary
with the user GEM context and engines.

v2: Check for no HW context in guc_stage_desc_init
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-4-chris@chris-wilson.co.uk

If we place a pointer to the engine specific intel_context_ops in the
engine itself, we can assign the ops pointer on initialising the
context, and then rely on it being set. This simplifies the code in
later patches.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-3-chris@chris-wilson.co.uk

This complex struct pulling in half the driver deserves its own
isolation in preparation for intel_context becoming an outright
complicated class of its own.

In order to split this beast into its own header also requests splitting
several of its dependent types and their dependencies into their own
headers as well.

v2: Add standalone compilation tests
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-2-chris@chris-wilson.co.uk

For use in the next patch, if we track which engines have been used by
the HW, we can reduce the work required to flush our state off the HW to
those engines.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-1-chris@chris-wilson.co.uk

Set pp_div field of struct pps_registers to INVALID_MMIO_REG when the
register isn't there, and use i915_mmio_reg_valid() instead of repeating
the condition all over the place.

Use INVALID_MMIO_REG explicitly for documentation purposes, even if the
value is unchanged from 0.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-2-jani.nikula@intel.com

PPS locking is a thing on pre-DDI, up to and including CPT and PPT.

The PPS divisor register exists up to gen 9 BC, replaced by a field in
the control register starting from gen 9 LP, i.e. BXT, GLK, and CNP on.

Commit b0a08bec ("drm/i915/bxt: eDP Panel Power sequencing") stopped
using the divisor register, but inadvertently conflated the PPS unlock
in the change. No longer doing the unlocking was the right thing to do,
however we should've stopped already at LPT (or DDI platforms).

Deconflate the two.

Arguably this could be moved away from here altogether, but this is the
minimally intrusive change for now.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-1-jani.nikula@intel.com

We can no longer assume execution ordering, and in particular we cannot
assume which context will execute last. One side-effect of this is that
we cannot determine if the kernel-context is resident on the GPU, so
remove the routines that claimed to do so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-4-chris@chris-wilson.co.uk

Currently we assume that we know the order in which requests run and so
can determine if we need to reissue a switch-to-kernel-context prior to
idling. That assumption does not hold for the future, so instead of
tracking which barriers have been used, simply determine if we have ever
switched away from the kernel context by using the engine and before
idling ensure that all engines that have been used since the last idle
are synchronously switched back to the kernel context for safety (and
else of shrinking memory while idle).

v2: Use intel_engine_mask_t and ALL_ENGINES
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-3-chris@chris-wilson.co.uk

We load a context (the kernel context) on both module load and resume in
order to initialise some logical state onto the GPU. We can use the same
routine for both operations, which will become more useful as we
refactor rc6/rps enabling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-2-chris@chris-wilson.co.uk

When the system idles, we switch to the kernel context as a defensive
measure (no users are harmed if the kernel context is lost). Currently,
we issue a switch to kernel context and then come back later to see if
the kernel context is still current and the system is idle. However,
if we are no longer privy to the runqueue ordering, then we have to
relax our assumptions about the logical state of the GPU and the only
way to ensure that the kernel context is currently loaded is by issuing
a request to run after all others, and wait for it to complete all while
preventing anyone else from issuing their own requests.

v2: Pull wedging into switch_to_kernel_context_sync() but only after
waiting (though only for the same short delay) for the active context to
finish.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-1-chris@chris-wilson.co.uk

Check that we have setup on preemption for the engine before testing,
instead warn if it is not enabled on supported HW.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306142517.22558-28-chris@chris-wilson.co.uk

Pretend that we have only 1 DBuf slice and that 1 slice is always
enabled, until we have a proper way for on-demand toggling of the second
slice.  Currently we'll try to incorrectly enable DBuf even when all
pipes are disabled and we are already runtime suspended (as the computed
number of DBuf slices will be 1 in that case).

This also means we'll leave the second slice enabled redundantly (except
when suspended), but that's an acceptable tradeoff until we have a
proper solution.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108756
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307103235.23538-1-imre.deak@intel.com

We can reduce the switch-to-kernel-context selftest to operate as a loop
and so trivially test another state transition (that of idle->busy).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307211947.6954-1-chris@chris-wilson.co.uk

We'll need to know the memory type in the system for some
bandwidth limitations and whatnot. Let's read that out on
gen9+.

v2: Rebase
v3: Fix the copy paste fail in the BXT bit definitions (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-13-ville.syrjala@linux.intel.com

We'll need information about the memory configuration on cnl+ too.
Extend the code to parse the slightly changed register layout.

v2: Document what cnl_get_dimm_size() returns (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-12-ville.syrjala@linux.intel.com

Remove the pointless zero initialization of bunch of things
(the thing is kzalloc()ed).

Also throw out the mostly useless on-stack string. I think
it'll be clear enough from the logs that 0 means unknown.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-11-ville.syrjala@linux.intel.com

Rename the dimm info structs for clarity.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-10-ville.syrjala@linux.intel.com

Decouple intel_is_dram_symmetric() from the raw register values
by comparing just the dram_channel_info structs.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-9-ville.syrjala@linux.intel.com

Reduce the code duplication a bit by sharing the same
code for parsing both DIMMs on a channel.

v2: s/%d/%u/ all over (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-8-ville.syrjala@linux.intel.com

The BXT code for parsing DIMM info works for GLK too. Let's
dig it out even if we might not need it immediately.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-7-ville.syrjala@linux.intel.com

The BXT DUNIT register tells us the size of each DRAM device
in Gb. We want to report the size of the whole DIMM in GB, so
that it matches how we report it for non-LP platforms.

v2: Deobfuscate the math (Chris)
    s/GB/GBIT/ in the register bit definitions (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-6-ville.syrjala@linux.intel.com

Polish the bxt DIMM parsing by extracting a few small helpers.

v2: Use struct dram_dimm_info
v3: Document what bxt_get_dimm_size() returns (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-5-ville.syrjala@linux.intel.com

Pass the dimm struct to skl_is_16gb_dimm() rather than passing each
value separately. And let's replace the hardcoded set of values with
some simple arithmetic.

Also fix the byte vs. bit inconsistency in the debug message,
and polish the wording otherwise as well.

v2: Deobfuscate the math (Chris)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-4-ville.syrjala@linux.intel.com

Make the code less repetitive by extracting a few small helpers.

v2: Squash in the switch removal for skl_get_dimm_ranks()
    (it got misplaced in a rebase accident)
    Document what skl_get_dimm_size() returns (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-3-ville.syrjala@linux.intel.com

Life will be easier later if we have the ranks stored
as a bare number.

v2: s/%d/%u/ all over (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-2-ville.syrjala@linux.intel.com

Now with the watermarks fixes merged, Icelake is stable enough to
have the alpha support protection flag removed.

We have a few ICL machines in our CI and it is mostly green with
failures in tests that will not impact future linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.

As a reminder i915.alpha_support was created to protect
future linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.

Specifically, alpha support says nothing about the development
state of the hardware, and everything about the state of the
driver in a kernel release.

This is semantically no different from the old
preliminary_hw_support flag, but the old one was all too often
interpreted as (preliminary hw) support instead of the intended
(preliminary) hw support, and it was misleading for everyone.
Hence the rename.

Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-y.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-iclb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305221153.359-1-jose.souza@intel.com

To facilitate the next patch to allow preemptible kernels not to incur
the wrath of hangcheck, we need to ensure that we can still suspend and
shutdown. That is we will not be able to rely on hangcheck to terminate
a blocking kernel and instead must manually do so ourselves. The
advantage is that we can apply more pressure!

As we now perform a GPU reset to clean up any residual kernels, we leave
the GPU in an unknown state and in particular can not talk to the GuC
before we reinitialise it following resume. For example, we no longer
need to tell the GuC to suspend itself, as it is already reset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307104530.21745-2-chris@chris-wilson.co.uk