AFAIK the only version of smc9194.c with Mac support is the one in the
linux-mac68k CVS repo, which never made it to the mainline.

Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194
under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55.
(See pre-git era "[PATCH] add m68k dependencies to net driver config".)
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.

Fixes: bf4e0a3d ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: NIdo Schimmel <idosch@idosch.org>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :

/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;

But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)

What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.

So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.

To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs

Only tcp_tso_segs() has to enforce the gso_max_segs limit.

Tested:

ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast

Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
    691  (ss -temoi shows cwnd is stuck around 6 )
    667
    651
    631
    517

After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
   1733 (ss -temoi shows cwnd is around 386 )
   1778
   1746
   1781
   1718

Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an attempt is made to disable RX checksums, USB adapter is changed
but netdev->features is not, because smsc75xx_set_features() returns a
non zero value.

This throws errors from netdev_rx_csum_fault() :
<devname>: hw csum failure
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.

This patch expands the error path to simply call module_put if
cb->start() fails.

Fixes: 41c87425 ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After resuming from suspend, the PCI device support must re-enable the
interrupt setting so that interrupts are actually delivered.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-02-20

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a memory leak in LPM trie's map_free() callback function, where
   the trie structure itself was not freed since initial implementation.
   Also a synchronize_rcu() was needed in order to wait for outstanding
   programs accessing the trie to complete, from Yonghong.

2) Fix sock_map_alloc()'s error path in order to correctly propagate
   the -EINVAL error in case of too large allocation requests. This
   was just recently introduced when fixing close hooks via ULP layer,
   fix from Eric.

3) Do not use GFP_ATOMIC in __cpu_map_entry_alloc(). Reason is that this
   will not work with the recent __ptr_ring_init_queue_alloc() conversion
   to kvmalloc_array(), where in case of fallback to vmalloc() that GFP
   flag is invalid, from Jason.

4) Fix two recent syzkaller warnings: i) fix bpf_prog_array_copy_to_user()
   when a prog query with a big number of ids was performed where we'd
   otherwise trigger a warning from allocator side, ii) fix a missing
   mlock precharge on arraymaps, from Daniel.

5) Two fixes for bpftool in order to avoid breaking JSON output when used
   in batch mode, from Quentin.

6) Move a pr_debug() in libbpf in order to avoid having an otherwise
   uninitialized variable in bpf_program__reloc_text(), from Jeremy.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jesper Dangaard Brouer says:

====================
virtio_net: several bugs in XDP code for driver virtio_net

The virtio_net driver actually violates the original memory model of
XDP causing hard to debug crashes.  Per request of John Fastabend,
instead of removing the XDP feature I'm fixing as much as possible.
While testing virtio_net with XDP_REDIRECT I found 4 different bugs.

Patch-1: not enough tail-room for build_skb in receive_mergeable()
 only option is to disable XDP_REDIRECT in receive_mergeable()

Patch-2: XDP in receive_small() basically never worked (check wrong flag)

Patch-3: fix memory leak for XDP_REDIRECT in error cases

Patch-4: avoid crash when ndo_xdp_xmit is called on dev not ready for XDP

In the longer run, we should consider introducing a separate receive
function when attaching an XDP program, and also change the memory
model to be compatible with XDP when attaching an XDP prog.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a driver implements the ndo_xdp_xmit() function, there is
(currently) no generic way to determine whether it is safe to call.

It is e.g. unsafe to call the drivers ndo_xdp_xmit, if it have not
allocated the needed XDP TX queues yet.  This is the case for
virtio_net, which first allocates the XDP TX queues once an XDP/bpf
prog is attached (in virtnet_xdp_set()).

Thus, a crash will occur for virtio_net when redirecting to another
virtio_net device's ndo_xdp_xmit, which have not attached a XDP prog.
The sample xdp_redirect_map tries to attach a dummy XDP prog to take
this into account, but it can also easily fail if the virtio_net (or
actually underlying vhost driver) have not allocated enough extra
queues for the device.

Allocating more queue this is currently a manual config.
Hint for libvirt XML add:

  <driver name='vhost' queues='16'>
    <host mrg_rxbuf='off'/>
    <guest tso4='off' tso6='off' ecn='off' ufo='off'/>
  </driver>

The solution in this patch is to check that the device have loaded an
XDP/bpf prog before proceeding.  This is similar to the check
performed in driver ixgbe.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XDP_REDIRECT calling xdp_do_redirect() can fail for multiple reasons
(which can be inspected by tracepoints). The current semantics is that
on failure the driver calling xdp_do_redirect() must handle freeing or
recycling the page associated with this frame.  This can be seen as an
optimization, as drivers usually have an optimized XDP_DROP code path
for frame recycling in place already.

The virtio_net driver didn't handle when xdp_do_redirect() failed.
This caused a memory leak as the page refcnt wasn't decremented on
failures.

The function __virtnet_xdp_xmit() did handle one type of failure,
when the xmit queue virtqueue_add_outbuf() is full, which "hides"
releasing a refcnt on the page.  Instead the function __virtnet_xdp_xmit()
must follow API of xdp_do_redirect(), which on errors leave it up to
the caller to free the page, of the failed send operation.

Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When configuring virtio_net to use the code path 'receive_small()',
in-order to get correct XDP_REDIRECT support, I discovered TCP packets
would get silently dropped when loading an XDP program action XDP_PASS.

The bug seems to be that receive_small() when XDP is loaded check that
hdr->hdr.flags is zero, which seems wrong as hdr.flags contains the
flags VIRTIO_NET_HDR_F_* :
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
 #define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */

TCP got dropped as it had the VIRTIO_NET_HDR_F_DATA_VALID flag set.

The flags that are relevant here are the VIRTIO_NET_HDR_GSO_* flags
stored in hdr->hdr.gso_type. Thus, the fix is just check that none of
the gso_type flags have been set.

Fixes: bb91accf ("virtio-net: XDP support for small buffers")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The virtio_net code have three different RX code-paths in receive_buf().
Two of these code paths can handle XDP, but one of them is broken for
at least XDP_REDIRECT.

Function(1): receive_big() does not support XDP.
Function(2): receive_small() support XDP fully and uses build_skb().
Function(3): receive_mergeable() broken XDP_REDIRECT uses napi_alloc_skb().

The simple explanation is that receive_mergeable() is broken because
it uses napi_alloc_skb(), which violates XDP given XDP assumes packet
header+data in single page and enough tail room for skb_shared_info.

The longer explaination is that receive_mergeable() tries to
work-around and satisfy these XDP requiresments e.g. by having a
function xdp_linearize_page() that allocates and memcpy RX buffers
around (in case packet is scattered across multiple rx buffers).  This
does currently satisfy XDP_PASS, XDP_DROP and XDP_TX (but only because
we have not implemented bpf_xdp_adjust_tail yet).

The XDP_REDIRECT action combined with cpumap is broken, and cause hard
to debug crashes.  The main issue is that the RX packet does not have
the needed tail-room (SKB_DATA_ALIGN(skb_shared_info)), causing
skb_shared_info to overlap the next packets head-room (in which cpumap
stores info).

Reproducing depend on the packet payload length and if RX-buffer size
happened to have tail-room for skb_shared_info or not.  But to make
this even harder to troubleshoot, the RX-buffer size is runtime
dynamically change based on an Exponentially Weighted Moving Average
(EWMA) over the packet length, when refilling RX rings.

This patch only disable XDP_REDIRECT support in receive_mergeable()
case, because it can cause a real crash.

IMHO we should consider NOT supporting XDP in receive_mergeable() at
all, because the principles behind XDP are to gain speed by (1) code
simplicity, (2) sacrificing memory and (3) where possible moving
runtime checks to setup time.  These principles are clearly being
violated in receive_mergeable(), that e.g. runtime track average
buffer size to save memory consumption.

In the longer run, we should consider introducing a separate receive
function when attaching an XDP program, and also change the memory
model to be compatible with XDP when attaching an XDP prog.

Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-02-20

The following pull request includes some fixes for the mlx5 core and
netdevice driver.

Please pull and let me know if there's any issue.

-stable 4.10.y:
('net/mlx5e: Fix loopback self test when GRO is off')

-stable 4.12.y:
('net/mlx5e: Specify numa node when allocating drop rq')

-stable 4.13.y:
('net/mlx5e: Verify inline header size do not exceed SKB linear size')

-stable 4.15.y:
('net/mlx5e: Fix TCP checksum in LRO buffers')
('net/mlx5: Fix error handling when adding flow rules')
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains large batch with Netfilter fixes for
your net tree, mostly due to syzbot report fixups and pr_err()
ratelimiting, more specifically, they are:

1) Get rid of superfluous unnecessary check in x_tables before vmalloc(),
   we don't hit BUG there anymore, patch from Michal Hock, suggested by
   Andrew Morton.

2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang.

3) Drop socket lock that results in circular locking dependency, patch
   from Paolo Abeni.

4) Drop packet if case of malformed blob that makes backpointer jump
   in x_tables, from Florian Westphal.

5) Fix refcount leak due to race in ipt_CLUSTERIP in
   clusterip_config_find_get(), from Cong Wang.

6) Several patches to ratelimit pr_err() for x_tables since this can be
   a problem where CAP_NET_ADMIN semantics can protect us in untrusted
   namespace, from Florian Westphal.

7) Missing .gitignore update for new autogenerated asn1 state machine
   for the SNMP NAT helper, from Zhu Lingshan.

8) Missing timer initialization in xt_LED, from Paolo Abeni.

9) Do not allow negative port range in NAT, also from Paolo.

10) Lock imbalance in the xt_hashlimit rate match mode, patch from
    Eric Dumazet.

11) Initialize workqueue before timer in the idletimer match,
    from Eric Dumazet.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So far, if the filter was too large to fit in the allocated skb, the
kernel did not return any error and stopped dumping. Modify the dumper
so that it returns -EMSGSIZE when a filter fails to dump and it is the
first filter in the skb. If we are not first, we will get a next chance
with more room.

I understand this is pretty near to being an API change, but the
original design (silent truncation) can be considered a bug.

Note: The error case can happen pretty easily if you create a filter
with 32 actions and have 4kb pages. Also recent versions of iproute try
to be clever with their buffer allocation size, which in turn leads to
Signed-off-by: NRoman Kapl <code@rkapl.cz>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If building match list or adding existing fg fails when
node is locked, function returned without unlocking it.
This happened if node version changed or adding existing fg
returned with EAGAIN after jumping to search_again_locked label.

Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

First use of drop counters happens in esw_apply_vport_conf function,
while they are allocated later in the flow. Fix that by moving
esw_vport_create_drop_counters function to be called before the first use.

Fixes: b8a0dbe3 ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

We can't allow only some of the rules sharing an FTE to ask for
header re-write, add it to the conflicting action checks.

Fixes: 0d235c3f ('net/mlx5: Add hash table to search FTEs in a flow-group')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The adapter uses the cache_line_128byte setting to set the bounds for
end padding. On systems where the cacheline size is greater than 128B
use 128B instead of the default of 64B. This results in fewer partial
cacheline writes. There's a 50% chance it will pad to the end of a 256B
cache line vs only 25% when using 64B.

Fixes: f32f5bd2 ("net/mlx5: Configure cache line size for start and end padding")
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When allocating a drop rq, no numa node is explicitly set which means
allocations are done on node zero. This is not necessarily the nearest
numa node to the HCA, and even worse, might even be a memoryless numa
node.

Choose the numa_node given to us by the pci device in order to properly
allocate the coherent dma memory instead of assuming zero is valid.

Fixes: 556dd1b9 ("net/mlx5e: Set drop RQ's necessary parameters only")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This isn't supported when we emulate eswitch vlan push action which
is the current state of things.

Fixes: 8b32580d ('net/mlx5e: Add TC vlan action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Address these sparse warnings on drivers/net/ethernet/mellanox/mlx5

[..]/core/diag/fs_tracepoint.c:99:53: warning: non-constant initializer for static object
[..]/core/diag/fs_tracepoint.c:102:53: warning: non-constant initializer for static object

etc
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5:

[..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes]
[..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes]
[..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes]
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control
segment of the WQE. It assumes that the linear part contains at least
MLX5E_MIN_INLINE bytes, which can be wrong.

Cited commit verified that driver will not copy more bytes into the
inline header part that the actual size of the packet. Re-factor this
check to make sure we do not exceed the linear part as well.

This fix is aligned with the current driver's assumption that the entire
L2 will be present in the linear part of the SKB.

Fixes: 6aace17e ("net/mlx5e: Fix inline header size for small packets")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When GRO is off, the transport header pointer in sk_buff is
initialized to network's header.

To find the udp header, instead of using udp_hdr() which assumes
skb_network_header was set, manually calculate the udp header offset.

Fixes: 0952da79 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: NInbar Karmy <inbark@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When receiving an LRO packet, the checksum field is set by the hardware
to the checksum of the first coalesced packet. Obviously, this checksum
is not valid for the merged LRO packet and should be fixed.  We can use
the CQE checksum which covers the checksum of the entire merged packet
TCP payload to help us calculate the checksum incrementally.

Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
and watching nstat checksum error counters (in addition to the obvious
bandwidth drop caused by checksum errors).

This bug is usually "hidden" since LRO packets would go through the
CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.

It's important to note that previous to this patch, LRO packets provided
with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
checksum (even though the checksum inside the TCP header is incorrect),
since the hardware LRO aggregation is terminated upon receiving a packet
with bad checksum.

Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fixes a GCC maybe-uninitialized warning introduced by 48cca7e4.
"text" is only initialized inside the if statement so only print debug
info there.

Fixes: 48cca7e4 ("libbpf: add support for bpf_call")
Signed-off-by: NJeremy Cline <jeremy@jcline.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

After introduction of commit d0869c00, there were some instances of
RX queue entries from a previous session (before the device was closed
and reopened) returned to the NAPI polling routine. Since the corresponding
socket buffers were freed, this resulted in a panic on reopen. Include
a check for a NULL skb here to avoid this.

Fixes: d0869c00 ("ibmvnic: Clean RX pool buffers during device close")
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Prevent index integer overflow in ptr_ring, from Jason Wang.

 2) Program mvpp2 multicast filter properly, from Mikulas Patocka.

 3) The bridge brport attribute file is write only and doesn't have a
    ->show() method, don't blindly invoke it. From Xin Long.

 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.

 5) Fix multiple definition issue with if_ether.h UAPI header, from
    Hauke Mehrtens.

 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
    Varadhan.

 7) Revert XDP redirect support from thunderx driver, it is not
    implemented properly. From Jesper Dangaard Brouer.

 8) Fix missing RTNL protection across some tipc operations, from Ying
    Xue.

 9) Return the correct IV bytes in the TLS getsockopt code, from Boris
    Pismenny.

10) Take tclassid into consideration properly when doing FIB rule
    matching. From Stefano Brivio.

11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.

12) TUN driver doesn't align frags properly, and we can end up doing
    unaligned atomics on misaligned metadata. From Eric Dumazet.

13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
    Subash Abhinov Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  tg3: APE heartbeat changes
  mlxsw: spectrum_router: Do not unconditionally clear route offload indication
  net: qualcomm: rmnet: Fix possible null dereference in command processing
  net: qualcomm: rmnet: Fix warning seen with 64 bit stats
  net: qualcomm: rmnet: Fix crash on real dev unregistration
  sctp: remove the left unnecessary check for chunk in sctp_renege_events
  rxrpc: Work around usercopy check
  tun: fix tun_napi_alloc_frags() frag allocator
  udplite: fix partial checksum initialization
  skbuff: Fix comment mis-spelling.
  dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
  PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
  cxgb4: fix trailing zero in CIM LA dump
  cxgb4: free up resources of pf 0-3
  fib_semantics: Don't match route with mismatching tclassid
  NFC: llcp: Limit size of SDP URI
  tls: getsockopt return record sequence number
  tls: reset the crypto info if copy_from_user fails
  tls: retrun the correct IV in getsockopt
  docs: segmentation-offloads.txt: add SCTP info
  ...

In ungraceful host shutdown or driver crash case BMC connectivity is
lost. APE firmware is missing the driver state in this
case to keep the BMC connectivity alive.
This patch has below change to address this issue.

Heartbeat mechanism with APE firmware. This heartbeat mechanism
is needed to notify the APE firmware about driver state.

This patch also has the change in wait time for APE event from
1ms to 20ms as there can be some delay in getting response.

v2: Drop inline keyword as per David suggestion.
Signed-off-by: NPrashant Sreedharan <prashant.sreedharan@broadcom.com>
Signed-off-by: NSatish Baddipadige <satish.baddipadige@broadcom.com>
Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We had one report from syzkaller [1]

First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.

Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.

[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 panic+0x1e4/0x41c kernel/panic.c:183
 __warn+0x1dc/0x200 kernel/panic.c:547
 report_bug+0x211/0x2d0 lib/bug.c:184
 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
 fixup_bug arch/x86/kernel/traps.c:247 [inline]
 do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
 queue_work include/linux/workqueue.h:488 [inline]
 schedule_work include/linux/workqueue.h:546 [inline]
 idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
 </IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378
 debug_object_init+0x17/0x20 lib/debugobjects.c:391
 __init_work+0x2b/0x60 kernel/workqueue.c:506
 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
 idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
 find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
 do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
 nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
 SYSC_setsockopt net/socket.c:1850 [inline]
 SyS_setsockopt+0x189/0x360 net/socket.c:1829
 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287

Fixes: 0902b469 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzkaller <syzkaller@googlegroups.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.

Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.

Fixes: 3984d1a8 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Tested-by: NAlexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Fix issues with CONFIG_DEBUG_PREEMPT enabled

Patch 1 and 2 fixes issues identified when CONFIG_DEBUG_PREEMPT was
enabled. These involve APIs which were called in invalid contexts.

Patch 3 is a null derefence fix identified by code inspection.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a command packet with invalid mux id is received, the packet would
not have a valid endpoint. This invalid endpoint maybe dereferenced
leading to a crash. Identified by manual code inspection.

Fixes: 3352e6c4 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist")
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With CONFIG_DEBUG_PREEMPT enabled, a warning was seen on device
creation. This occurs due to the incorrect cpu API usage in
ndo_get_stats64 handler.

BUG: using smp_processor_id() in preemptible [00000000] code: rmnetcli/5743
caller is debug_smp_processor_id+0x1c/0x24
Call trace:
[<ffffff9d48c8967c>] dump_backtrace+0x0/0x2a8
[<ffffff9d48c89bbc>] show_stack+0x20/0x28
[<ffffff9d4901fff8>] dump_stack+0xa8/0xe0
[<ffffff9d490421e0>] check_preemption_disabled+0x104/0x108
[<ffffff9d49042200>] debug_smp_processor_id+0x1c/0x24
[<ffffff9d494a36b0>] rmnet_get_stats64+0x64/0x13c
[<ffffff9d49b014e0>] dev_get_stats+0x68/0xd8
[<ffffff9d49d58df8>] rtnl_fill_stats+0x54/0x140
[<ffffff9d49b1f0b8>] rtnl_fill_ifinfo+0x428/0x9cc
[<ffffff9d49b23834>] rtmsg_ifinfo_build_skb+0x80/0xf4
[<ffffff9d49b23930>] rtnetlink_event+0x88/0xb4
[<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78
[<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78
[<ffffff9d49b08bf8>] __netdev_upper_dev_link+0x290/0x5e8
[<ffffff9d49b08fcc>] netdev_master_upper_dev_link+0x3c/0x48
[<ffffff9d494a2e74>] rmnet_newlink+0xf0/0x1c8
[<ffffff9d49b23360>] rtnl_newlink+0x57c/0x6c8
[<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244
[<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc
[<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44
[<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294
[<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390
[<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60
[<ffffff9d49ae91bc>] SyS_sendto+0x1a0/0x1e4
[<ffffff9d48c83770>] el0_svc_naked+0x24/0x28

Fixes: 192c4b5d ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With CONFIG_DEBUG_PREEMPT enabled, a crash with the following call
stack was observed when removing a real dev which had rmnet devices
attached to it.
To fix this, remove the netdev_upper link APIs and instead use the
existing information in rmnet_port and rmnet_priv to get the
association between real and rmnet devs.

BUG: sleeping function called from invalid context
in_atomic(): 0, irqs_disabled(): 0, pid: 5762, name: ip
Preemption disabled at:
[<ffffff9d49043564>] debug_object_active_state+0xa4/0x16c
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
PC is at ___might_sleep+0x13c/0x180
LR is at ___might_sleep+0x17c/0x180
[<ffffff9d48ce0924>] ___might_sleep+0x13c/0x180
[<ffffff9d48ce09c0>] __might_sleep+0x58/0x8c
[<ffffff9d49d6253c>] mutex_lock+0x2c/0x48
[<ffffff9d48ed4840>] kernfs_remove_by_name_ns+0x48/0xa8
[<ffffff9d48ed6ec8>] sysfs_remove_link+0x30/0x58
[<ffffff9d49b05840>] __netdev_adjacent_dev_remove+0x14c/0x1e0
[<ffffff9d49b05914>] __netdev_adjacent_dev_unlink_lists+0x40/0x68
[<ffffff9d49b08820>] netdev_upper_dev_unlink+0xb4/0x1fc
[<ffffff9d494a29f0>] rmnet_dev_walk_unreg+0x6c/0xc8
[<ffffff9d49b00b40>] netdev_walk_all_lower_dev_rcu+0x58/0xb4
[<ffffff9d494a30fc>] rmnet_config_notify_cb+0xf4/0x134
[<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78
[<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78
[<ffffff9d49b0b568>] rollback_registered_many+0x230/0x3c8
[<ffffff9d49b0b738>] unregister_netdevice_many+0x38/0x94
[<ffffff9d49b1e110>] rtnl_delete_link+0x58/0x88
[<ffffff9d49b201dc>] rtnl_dellink+0xbc/0x1cc
[<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244
[<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc
[<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44
[<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294
[<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390
[<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60
[<ffffff9d49ae6f94>] ___sys_sendmsg+0x298/0x2b0
[<ffffff9d49ae98f8>] SyS_sendmsg+0xb4/0xf0
[<ffffff9d48c83770>] el0_svc_naked+0x24/0x28

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Fixes: 60d58f97 ("net: qualcomm: rmnet: Implement bridge mode")
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull x86 Kconfig fixes from Thomas Gleixner:
 "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in
  Kconfig when CPU selections are explicitely set to M586 or M686"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig
  x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group
  x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group

Pull perf updates from Thomas Gleixner:
 "Perf tool updates and kprobe fixes:

   - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf
     top' using it, making it bearable to use it in large core count
     systems such as Knights Landing/Mill Intel systems (Kan Liang)

   - s/390 now uses syscall.tbl, just like x86-64 to generate the
     syscall table id -> string tables used by 'perf trace' (Hendrik
     Brueckner)

   - Use strtoull() instead of home grown function (Andy Shevchenko)

   - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar)

   - Document missing 'perf data --force' option (Sangwon Hong)

   - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William
     Cohen)

   - Improve error handling and error propagation of ftrace based
     kprobes so failures when installing kprobes are not silently
     ignored and create disfunctional tracepoints"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  kprobes: Propagate error from disarm_kprobe_ftrace()
  kprobes: Propagate error from arm_kprobe_ftrace()
  Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h"
  perf s390: Rework system call table creation by using syscall.tbl
  perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl
  tools/headers: Synchronize kernel ABI headers, v4.16-rc1
  perf test: Fix test trace+probe_libc_inet_pton.sh for s390x
  perf data: Document missing --force option
  perf tools: Substitute yet another strtoull()
  perf top: Check the latency of perf_top__mmap_read()
  perf top: Switch default mode to overwrite mode
  perf top: Remove lost events checking
  perf hists browser: Add parameter to disable lost event warning
  perf top: Add overwrite fall back
  perf evsel: Expose the perf_missing_features struct
  perf top: Check per-event overwrite term
  perf mmap: Discard legacy interface for mmap read
  perf test: Update mmap read functions for backward-ring-buffer test
  perf mmap: Introduce perf_mmap__read_event()
  perf mmap: Introduce perf_mmap__read_done()
  ...

Pull irq updates from Thomas Gleixner:
 "A small set of updates mostly for irq chip drivers:

   - MIPS GIC fix for spurious, masked interrupts

   - fix for a subtle IPI bug in GICv3

   - do not probe GICv3 ITSs that are marked as disabled

   - multi-MSI support for GICv2m

   - various small cleanups"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro
  irqchip/bcm: Remove hashed address printing
  irqchip/gic-v2m: Add PCI Multi-MSI support
  irqchip/gic-v3: Ignore disabled ITS nodes
  irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
  irqchip/gic-v3: Change pr_debug message to pr_devel
  irqchip/mips-gic: Avoid spuriously handling masked interrupts