select NEW_LEDS for now until the Kconfig dependencies have been
fixed.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

System topology on intel based system needs to be exported
for non-numa case as well.

All parts of asm-i386/topology.h has come under
#ifdef CONFIG_NUMA after the merge to asm-x86/topology.h

/sys/devices/system/cpu/cpu?/topology/* is populated based on
ENABLE_TOPO_DEFINES

The sysfs cpu topology is not being populated on my dual socket
dual core xeon 5160 processor based (x86 32 bit) system.

CONFIG_NUMA is not set in my case yet the topology is relevant
and useful.

irqbalance daemon application depends on topology to build the
cpus and package list and it fails on Fedora9 beta since the
sysfs topology was not being populated in the 2.6.25 kernel.

I am not sure if it was intentional to not define ENABLE_TOPO_DEFINES
for non-numa systems.

This fix has been tested on the above mentioned dual core, dual socket
system.
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

709f744f causes my computer to freeze during the start up of X and my
login manger (GDM). It gets to the point where it has shown the default
X mouse cursor logo (a big X / cross) and does not respond to anything
from that point on.

This worked fine before 709f744f, and it works fine with 709f744f
reverted on top of Linus' current tree (f74d505b). The revert had
conflicts, as far as I can tell due to white space changes. The diff I
ended up with is below.

It is 100% reproducible.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

On some of our (single board computer) boards (x86) we are using an
IPMI controller that uses I/O ports 0x62 and 0x66 for a KCS (keyboard
controller style) IPMI system interface.

Trying to load the openipmi driver fails, because the ports
(0x62/0x66) are reserved for keyboard. keyboard reserves the full
range 0x60-0x6F while it doesn't need to.

Reserve only ports 0x60 and 0x64 for the legacy PS/2 i8042 keyboad
controller instead of 0x60-0x6F to allow the openipmi driver to work.

[ tglx: added 64bit fixup ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If the task never used fpu, initialize the fpu before restoring the FP
state from the signal handler context. This will allocate the fpu
state, if the task never needed it before.
Reported-and-bisected-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NEric Sesterhenn <snakebyte@gmx.de>
Cc: Frederik Deweerdt <deweerdt@free.fr>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Jeff Garzik pointed out that this printout is not needed.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

commit 62179849
    x86: fix setup printk format warning

is for linux-next and not for .26
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Move the scattered checks for PAT support to a single function. Its
moved to addon_cpuid_features.c as this file is shared between 32 and
64 bit.

Remove the manipulation of the PAT feature bit and just disable PAT in
the PAT layer, based on the PAT bit provided by the CPU and the
current CPU version/model white list.

Change the boot CPU check so it works on Voyager somewhere in the
future as well :) Also panic, when a secondary has PAT disabled but
the primary one has alrady switched to PAT. We have no way to undo
that.

The white list is kept for now to ensure that we can rely on known to
work CPU types and concentrate on the software induced problems
instead of fighthing CPU erratas and subtle wreckage caused by not yet
verified CPUs. Once the PAT code has stabilized enough, we can remove
the white list and open the can of worms.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We want drivers to be able to use geode_has_vsa2 without having to worry
about what model geode is being compiled for.  This patch ensures that
geode_has_vsa2 is always defined.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This moves geode_has_vsa2 into a .c file, caches the result we get from
the VSA virtual registers, and causes the function to no longer be inline.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

commit e26a28d1
    x86: olpc build fix

was a fix to a patch that was withdrawn/delayed and then erroneously
commited to x86.git. Revert it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix fork/clone/vfork system call restart.
  sparc: Fix mmap VA span checking.

We clobber %i1 as well as %i0 for these system calls,
because they give two return values.

Therefore, on error, we have to restore %i1 properly
or else the restart explodes since it uses the wrong
arguments.

This fixes glibc's nptl/tst-eintr1.c testcase.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'm handing over maintainership to Jeff Kirsher and moving on
to other Linux/Open Source work within Intel. Good luck to Jeff ;)
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should not conditionalize VA range checks on MAP_FIXED.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix initrd regression.
  usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OF
  sparc64: remove online_page()
  sparc64: use compat_sys_utimes instead of home-grown local copy.
  sbus: Fix bpp driver build.
  sparc video: make blank use proper constant
  Revert "[SPARC64]: Wrap SMP IPIs with irq_enter()/irq_exit()."
  sparc: tcx.c remove unnecessary function

This reverts commit 22eecde2.  Uli
reports that it breaks UML on x86-64 with the Fedora 8 gcc (gcc 4.1.2),
causing a crash on startup. See

	http://marc.info/?l=linux-kernel&m=121011722806093&w=2

for a trace.
Reported-by: NUlrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We die because we forget to convert initrd_start and
initrd_end to virtual addresses.

Reported by Mikael Pettersson
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sparc doesn't have some of the OF interfaces this driver
wants to use.
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

        if ((drv->entry.next != drv->entry.prev) ||
            (drv->entry.next != NULL)) {

warns list_empty(&drv->entry).
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Greg KH <gregkh@suse.de>
Cc: Len Brown <lenb@kernel.org>
[ Version 2 totally redone based on suggestions from Linus & Greg ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 33dcdac2 ("kill ->put_inode")
removed the final use of i_op->put_inode, but left the now totally
unused "op" variable in iput().

Get rid of it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32.

That came from 9fc34113 x86: debug pmd_bad();
but we understand now that the typecasting was wrong for PAE in the previous
version: pagetable pages above 4GB looked bad and stopped Arjan from booting.

And revert that cded932b x86: fix pmd_bad
and pud_bad to support huge pages.  It was the wrong way round: we shouldn't
weaken every pmd_bad and pud_bad check to let huge pages slip through - in
part they check that we _don't_ have a huge page where it's not expected.

Put the x86 pmd_bad() and pud_bad() definitions back to what they have long
been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking
junk in the upper word is good; and x86_64 should follow x86_32's stricter
comparison, to stop thinking any subset of required bits is good); but that
should be a later patch.

Fix Hans' good observation that follow_page() will never find pmd_huge()
because that would have already failed the pmd_bad test: test pmd_huge in
between the pmd_none and pmd_bad tests.  Tighten x86's pmd_huge() check?
No, once it's a hugepage entry, it can get quite far from a good pmd: for
example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits.

However... though follow_page() contains this and another test for huge
pages, so it's nice to keep it working on them, where does it actually get
called on a huge page?  get_user_pages() checks is_vm_hugetlb_page(vma) to
to call alternative hugetlb processing, as does unmap_vmas() and others.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Earlier-version-tested-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] fix SMP ordering hole in fcntl_setlk()
  [PATCH] kill ->put_inode
  [PATCH] fix reservation discarding in affs

fcntl_setlk()/close() race prevention has a subtle hole - we need to
make sure that if we *do* have an fcntl/close race on SMP box, the
access to descriptor table and inode->i_flock won't get reordered.

As it is, we get STORE inode->i_flock, LOAD descriptor table entry vs.
STORE descriptor table entry, LOAD inode->i_flock with not a single
lock in common on both sides.  We do have BKL around the first STORE,
but check in locks_remove_posix() is outside of BKL and for a good
reason - we don't want BKL on common path of close(2).

Solution is to hold ->file_lock around fcheck() in there; that orders
us wrt removal from descriptor table that preceded locks_remove_posix()
on close path and we either come first (in which case eviction will be
handled by the close side) or we'll see the effect of close and do
eviction ourselves.  Note that even though it's read-only access,
we do need ->file_lock here - rcu_read_lock() won't be enough to
order the things.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

And with that last patch to affs killing the last put_inode instance we
can finally, after many years of transition kill this racy and awkward
interface.

(It's kinda funny that even the description in
Documentation/filesystems/vfs.txt was entirely wrong..)

Also remove a very misleading comment above the defintion of
struct super_operations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

- remove affs_put_inode, so preallocations aren't discared unnecessarily
  often.
- remove affs_drop_inode, it's called with a spinlock held, so it can't
  use a mutex.
- make i_opencnt atomic
- avoid direct b_count manipulations
- a few allocation failure fixes, so that these are more gracefully
  handled now.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (27 commits)
  pata_atiixp: Don't disable
  sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
  sata_inic162x: add cardbus support
  sata_inic162x: kill now unused SFF related stuff
  sata_inic162x: use IDMA for ATAPI commands
  sata_inic162x: use IDMA for non DMA ATA commands
  sata_inic162x: kill now unused bmdma related stuff
  sata_inic162x: use IDMA for ATA_PROT_DMA
  sata_inic162x: update TF read handling
  sata_inic162x: add / update constants
  sata_inic162x: misc clean ups
  sata_mv use hweight16() for bit counting (V2)
  sata_mv NCQ-EH for FIS-based switching
  sata_mv delayed eh handling
  libata: export ata_eh_analyze_ncq_error
  sata_mv new mv_port_intr function
  sata_mv fix mv_host_intr bug for hc_irq_cause
  sata_mv NCQ and SError fixes for mv_err_intr
  sata_mv rearrange mv_config_fbs
  sata_mv errata workaround for sata25 part 1
  ...

A couple of distributions (Fedora, Ubuntu) were having weird problems with the
ATI IXP series PATA controllers being reported as simplex.  At the heart of
the problem is that both distros ignored the recommendations to load pata_acpi
and ata_generic *AFTER* specific host drivers.

The underlying cause however is that if you D3 and then D0 an ATI IXP it
helpfully throws away some configuration and won't let you rewrite it.

Add checks to ata_generic and pata_acpi to pin ATIIXP devices.  Possibly the
real answer here is to quirk them and pin them, but right now we can't do that
before they've been pcim_enable()'d by a driver.

I'm indebted to David Gero for this.  His bug report not only reported the
problem but identified the cause correctly and he had tested the right values
to prove what was going on

[If you backport this for 2.6.24 you will need to pull in the 2.6.25
removal of the bogus WARN_ON() in pcim_enagle]
Signed-off-by: NAlan Cox <alan@redhat.com>
Tested-by: NDavid Gero <davidg@havidave.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

sata_inic162x is now ready for production use.  Bump the version,
explain what's working and what's not and drop EXPERIMENTAL.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When attached to cardbus, mmio region is at BAR 1.  Other than that,
everything else is the same.  Add support for it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

sata_inic162x now doesn't use any SFF features.  Remove all SFF
related stuff.

* Mask unsolicited ATA interrupts.  This removes our primary source of
  spurious interrupts and spurious interrupt handling can be tightened
  up.  There's no need to clear ATA interrupts by reading status
  register either.

* Don't dance with IDMA_CTL_ATA_NIEN and simplify accesses to
  IDMA_CTL.

* Inherit from sata_port_ops instead of ata_sff_port_ops.

* Don't initialize or use ioaddr.  There's no need to map BAR0-4
  anymore.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use IDMA for ATAPI commands.  Write and some misc commands time out
when executed using ATAPI_PROT_DMA but ATAPI_PROT_PIO works fine.  As
PIO is driven by DMA too, it doesn't make any noticeable difference
for native SATA devices.  inic_check_atapi_dma() is implemented to
force PIO for those ATAPI commands.

After this change, sata_inic162x issues all commands using IDMA.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use IDMA for PIO and non-data commands.  This allows sata_inic162x to
safely drive LBA48 devices.  Kill inic_dev_config() which contains
code to reject LBA48 devices.

With this change, status checking in inic_qc_issue() to avoid hard
lock up after hotplug can go away too.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

sata_inic162x doesn't use BMDMA anymore.  Kill bmdma related stuff.

* prdctl manipulation

* port IRQ mask manipulation

* inherit ATA_BASE_SHT instead of ATA_BMDMA_SHT

* BMDMA methods
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The modified driver on initio site has enough clue on how to use IDMA.
Use IDMA for ATA_PROT_DMA.

* LBA48 now works as long as it uses DMA (LBA48 devices still aren't
  allowed as it can destroy data if PIO is used for any reason).

* No need to mask IRQs for read DMAs as IDMA_DONE is properly raised
  after transfer to memory is actually completed.  There will be some
  spurious interrupts but host_intr will handle it correctly and
  manipulating port IRQ mask interacts badly with the other port for
  some reason, so command type dependent port IRQ masking is not used
  anymore.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

inic162x can't reliably read back TF or at least we don't know how to
do it yet.  The only values which seem reliable are status and error.
This patch updates access to TF.

* implement inic_tf_read() which reads the TF area in mmio area

* implement custom inic_qc_fill_rtf() which only returns true if
  status indicates device error.  it'll be returning bogus addresses
  for device errors but it'll be able to report why it failed at
  least.

* implement custom inic_check_ready() and use ata_wait_after_reset()
  instead of the SFF version.

* use inic_tf_read() for classification.

This is not perfect but it fixes hotplug detection failure and at
least makes the driver report 0's instead of random garbages while
reporting valid status and error for device errors.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* add a bunch of constants, most are from the datasheet, a few
  undocumented ones are from initio's modified driver

* HCTL_PWRDWN is bit 12 not 13

This is in preparation of further inic162x updates.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* use larger indents for structure member definitions

* kill unused variable @addr in inic_scr_write()

* kill unnecessary flushes in inic_freeze/thaw()

* kill buggy explicit kfree() on devres managed port private data

This is in preparation of further inic162x updates.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Some tidying as suggested by Grant Grundler.

Nuke local bit-counting function from sata_mv in favour of using hweight16().
Also add a short explanation for the 15msec timeout used when waiting for empty/idle.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Convert sata_mv's EH for FIS-based switching (FBS) over to the
sequence recommended by Marvell.  This enables us to catch/analyze
multiple failed links on a port-multiplier when using NCQ.

To do this, we clear the ERR_DEV bit in the EDMA Halt-Conditions register,
so that the EDMA engine doesn't self-disable on the first NCQ error.

Our EH code sets the MV_PP_FLAG_DELAYED_EH flag to prevent new commands
being queued while we await completion of all outstanding NCQ commands
on all links of the failed PM.

The SATA Test Control register tells us which links have failed,
so we must only wait for any other active links to finish up
before we stop the EDMA and run the .error_handler afterward.

The patch also includes skeleton code for handling of non-NCQ FBS operation.
This is more for documentation purposes right now, as that mode is not yet
enabled in sata_mv.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>