- 10 5月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Implements t4_init_rss_mode() to initialize the rss_mode for all the ports. If Tunnel All Lookup isn't specified in the global RSS Configuration, then we need to specify a default Ingress Queue for any ingress packets which aren't hashed. We'll use our first ingress queue. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
Adds device node to ULD info. Use the node info to alloc_ring() for ctrl TX queues Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Also changed the name of t4_hw.c:get_mps_bg_map() to t4_get_mps_bg_map() and make it an exported routine with a definition in cxgb4.h. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2015 1 次提交
-
-
由 Michal Hocko 提交于
set_filter_wr is requesting __GFP_NOFAIL allocation although it can return ENOMEM without any problems obviously (t4_l2t_set_switching does that already). So the non-failing requirement is too strong without any obvious reason. Drop __GFP_NOFAIL and reorganize the code to have the failure paths easier. The same applies to _c4iw_write_mem_dma_aligned which uses __GFP_NOFAIL and then checks the return value and returns -ENOMEM on failure. This doesn't make any sense what so ever. Either the allocation cannot fail or it can. del_filter_wr seems to be safe as well because the filter entry is not marked as pending and the return value is propagated up the stack up to c4iw_destroy_listen. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Jan Kara <jack@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Add new Common Code routines to retrieve Firmware Device Log parameters from PCIE_FW_PF[7]. The firmware initializes its Device Log very early on and stores the parameters for its location/size in that register. Using the parameters from the register allows us to access the Firmware Device Log even when the firmware crashes very early on or we're not attached to the firmware Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2015 1 次提交
-
-
由 Varun Prakash 提交于
This patch adds cxgb4_fcoe.c and enables FCOE_CRC, FCOE_MTU net device features. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 3月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Make PCI Device ID Tables be "const" to move them out of the data segment and remove a redundant check on CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN in t4_pci_id_tbl.h to guard the contents of the include file. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2015 1 次提交
-
-
由 Joe Perches 提交于
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
To allow for better scalability on systems with large core counts, we will try and allocate enough RDMA Concentrator IQs and MSI/X vectors as we have cores. If we cannot get enough MSI/X vectors, fall back to the minimum required: 1 per adapter rx channel. Also clean up cxgb_enable_msix() to make it readable and correct a bug where the vectors are not correctly assigned if the driver doesn't get the full amount requested. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds a common function for all Rx queue allocation. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Add support to get option/expansion rom version flashed in the adapter via ethtool getdrvinfo function. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2015 2 次提交
-
-
由 Markus Elfring 提交于
The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
cxgb_busy_poll, corresponding to ndo_busy_poll, gets called by the socket waiting for data. With busy_poll enabled, improvement is seen in latency numbers as observed by collecting netperf TCP_RR numbers. Below are latency number, with and without busy-poll, in a switched environment for a particular msg size: netperf command: netperf -4 -H <ip> -l 30 -t TCP_RR -- -r1,1 Latency without busy-poll: ~16.25 us Latency with busy-poll : ~08.79 us Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Move firmware version MACRO to a new t4fw_version.h file so that csiostor driver can also use it. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
commit b5a02f50 ("cxgb4 : Update ipv6 address handling api") introduced a regression where unregister cxgb4_inet6addr_notifier wasn't getting called during module_exit. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2015 1 次提交
-
-
由 Anish Bhatt 提交于
This patch improves on previously added support for ipv6 addresses. The code is consolidated to a single file and adds an api for use by dependent upper level drivers such as cxgb4i/iw_cxgb4 etc. Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDeepak Singh <deepak.s@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Removing old hard-wired initialization code in the driver, which is no longer used. Also deprecating few module parameters. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Add support for device log entry in debugfs Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 1月, 2015 4 次提交
-
-
由 Hariprasad Shenai 提交于
This patch cleanups all PL, XGMAC and SF related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all TP, MPS and TCAM related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleansup remaining SGE related macros/register defines and all PCI related ones that are defined in t4_regs.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all SGE related macros/register defines that are defined in t4_regs.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 12月, 2014 1 次提交
-
-
由 Hariprasad Shenai 提交于
Firmware 1.12.25.0 added support for QSA module, adding the driver code for it. Also fixes some ethtool get settings for other module types. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2014 1 次提交
-
-
由 Hariprasad Shenai 提交于
Remove use of calls into t4_fw_hello() with MASTER_MUST, which results in FW_HELLO_CMD_MASTERFORCE being set. The firmware doesn't support this and of course any existing PF Drivers will totally go for a toss. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2014 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2014 1 次提交
-
-
由 Hariprasad Shenai 提交于
Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for T5 for both cxgb4 and cxgb4vf driver. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2014 1 次提交
-
-
由 Eyal Perry 提交于
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NEyal Perry <eyalpe@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2014 1 次提交
-
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2014 1 次提交
-
-
由 Hariprasad Shenai 提交于
Add a new file t4_pci_id_tbl.h that contains T4/T5 PCI ID Table so that for all drivers that uses T4/T5 PCI functions changes can be done in one place. checkpatch.pl script reports following error, which if tried to fix ends up in compilation error. ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \ + { 0, } \ + } WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? new file mode 100644 ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_ID_TABLE_FENTRY(devid) \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION) << 8)), \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION2) << 8)) ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 11月, 2014 4 次提交
-
-
由 Hariprasad Shenai 提交于
This patch cleanups all PCIE, RSS & FW related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all port and VI related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups PF/VF and LDST related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all filter related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-