- 11 10月, 2009 15 次提交
-
-
由 Lydia Wang 提交于
like seqassoc 0xff, seqassoc 0xf0 of vt1708 should override Port Connectivity field into 'AC_JACK_PORT_COMPLEX' Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
VT1708 does not support unsolicited response, but we need hp detect to automute speaker. Implemented in workqueue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Smart 5.1 is for 3-jacks model, to reuse input pins as outputs. While off, they act as "line out" / "line in" / "mic in". While on, they acts as "line out" / "back left/right" / "center/lfe". Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Use hp_independent_mode_index to store hp index, and simplify function via_independent_hp_put with it. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For VT1708S and VT1702, deactivate "Headphone Playback Volume" and "Headphone Playback Mute" control if "Independent HP" mode is OFF. and rename VT1702 "Independent HP" text. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For VT1708B, VT1708S and VT1702, enter low current mode if no analog stream is opened and all aa path mute. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Enter low power state if AA-Path volume is muted. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
according to customer request, VT1702 AA-Path max volume (12 dB) is too high, so limit to 0 dB. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
IS_VT17*_VENDORID macros are used nowhere, so clean them up. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add a helper macro to retrieve the widget type from wiget cap bits. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
VIA VT1708S and VT1702 codecs can have two SPDIF outputs. One of them should have been handled as the extra digital out, but it's not properly accessed. This patch fixes the handling of the secondary SPDIF on these codecs with the slave dig-out as found in patch_sigmatel.c. This makes the use of such a device easier (for normal users). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Replace the accessor to pin defaults with the common code for caching. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Detect multiple digital-out pins in snd_hda_parse_pin_defconfig(). The dig_out_pin and dig_out_type fields become arrays. The codec parser still doesn't use this multiple pins detection, though. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Remove codec vendor names from the codec name strings. The vendor name is already given from the vendor name table, so displayed doubly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Split the monolithc HD-audio driver into several pieces: - snd-hda-intel HD-audio PCI controller driver; loaded via udev - snd-hda-codec HD-audio codec bus driver - snd-hda-codec-* Specific HD-audio codec drivers When built as modules, snd-hda-codec (that is invoked by snd-hda-intel) looks up the codec vendor ID and loads the corresponding codec module automatically via request_module(). When built in a kernel, each codec drivers are statically hooked up before probing the PCI. This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module information for each driver, and driver-linking codes between codec-bus and codec drivers. TODO: - Avoid EXPORT_SYMBOL*() when built-in kernel - Restore __devinit appropriately depending on the condition Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 11月, 2008 1 次提交
-
-
由 Wu Fengguang 提交于
Remove get_amp_nid(): it duplicates the one defined in hda_local.h Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 10月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Use generic array helpers to simplify array handling in snd-hda-intel. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 9月, 2008 3 次提交
-
-
由 Harald Welte 提交于
VT1708S' Mic Boost should be hidden in hardware design according to some customers' requirements. However, in case of bugs, it has to be exhibited to normal users, so we need to: * open a software backdoor, which is disabled by default in hardware * re-write .tlv & .info, to indicate the actual necessary info, which we cannot get from amplifier's capabiliies Signed-off-by: NLogan Li <LoganLi@viatech.com.cn> Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output is not working with alsa-kernel 1.0.18rc3. This patch makes it work by * activating the second S/PDIF output pin in the pin config * consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare() functions * remove the need for an extra hda_pcm_stream structure and rather represents the second digital output as substream within the primary S/PDIF digital out stream. Signed-off-by: NLogan Li <LoganLi@viatech.com.cn> Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist), to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will reference hp_mux. Signed-off-by: NLogan Li <LoganLi@viatech.com.cn> Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 10 9月, 2008 7 次提交
-
-
由 Harald Welte 提交于
The VT1702 and VT1708S have a second S/PDIF output which is used to connect to a HDMI transmitter. This patch adds support for it. Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
This mode allows an output stream to have two substreams, one for the speakers and one for the headphone. Each of the substreams has independent PCM data and uses a different DAC. Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
The VT1702 and VT1708S codecs are new HDA codecs by VIA. This patch adds support for them to the patch_via.c file for HDA Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harald Welte 提交于
* add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 25 5月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
We get quite noisy output on the right channel on VT1708 codec when 24bit samples are used. Suppress the 24bit support until any real fix is found. https://bugzilla.novell.com/show_bug.cgi?id=390473Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Keep the format verb at closing PCM streams. Introduced snd_hda_codec_cleanup_stream() for the parcicular purpose. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-