- 13 4月, 2010 2 次提交
-
-
由 Hans J. Koch 提交于
In the current implementation, CAN drivers need to #include <linux/can.h> _before_ they #include <linux/can/dev.h>, which is both ugly and unnecessary. Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the #include <linux/can.h> lines from drivers. Signed-off-by: NHans J. Koch <hjk@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Fuchs 提交于
This patch adds support for SJA1000 based PCI CAN interface cards from electronic system design gmbh. Some changes have been done on the common code: - esd boards must not have the 2nd local interupt enabled (PLX9030/9050) - a new path for PLX9056/PEX8311 chips has been added - new plx9056 reset function has been implemented - struct plx_card_info got a reset function entry In detail the following additional boards are now supported: CAN-PCI/200 (PCI) CAN-PCI/266 (PCI) CAN-PMC266 (PMC module) CAN-PCIe/2000 (PCI Express) CAN-CPCI/200 (Compact PCI, 3U) CAN-PCI104 (PCI104) Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2010 1 次提交
-
-
由 Marc Zyngier 提交于
Chip model can now be selected directly by matching the modalias name (instead of filling the .model field in platform_data), and allows the module to be auto-loaded. Previous behaviour is of course still supported. Convert the two in-tree users to this feature (icontrol & zeus). Tested on an Zeus platform (mcp2515). Signed-off-by: NMarc Zyngier <maz@misterjones.org> Acked-by: NChristian Pellegrin <chripell@fsfe.org> Cc: Edwin Peer <epeer@tmtservices.co.za> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 23 3月, 2010 1 次提交
-
-
由 Mike Frysinger 提交于
The MMR bits are being moved to this header, so include it. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2010 2 次提交
-
-
由 Yegor Yefremov 提交于
add routines for 8, 16 and 32-bit access like in drivers/i2c/busses/i2c-pca-platform.c Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yegor Yefremov 提交于
extend the AND mask, so that IRQF_SHARED flag remains Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2010 1 次提交
-
-
由 Barry Song 提交于
Looks like commit a6e4bc53 didn't include updates to drivers so the Blackfin CAN driver fails to build now. Signed-off-by: NBarry Song <barry.song@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
"skb" is alway non-null here, but even if it were null the check isn't needed because dev_kfree_skb() can handle it. This eliminates a smatch warning about dereferencing a variable before checking that it is non-null. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2010 2 次提交
-
-
由 Sriramakrishnan 提交于
CAN module on AM3517 requires programming of IO expander as part of init sequence - to enable CAN PHY. Added platform specific callback to handle phy control(switch on /off). Signed-off-by: NSriramakrishnan <srk@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfgang Grandegger 提交于
This patch makes the bus-error reporting configurable and allows to retrieve the CAN TX and RX bus error counters via netlink interface. I have added support for the SJA1000. The TX and RX bus error counters are also copied to the data fields 6..7 of error messages when state changes are reported. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2010 1 次提交
-
-
由 Sriram 提交于
Added the suspend and resume implementation in the HECC (CAN) driver. Signed-off-by: NK R Baalaaji <krbaalaaji@ti.com> Signed-off-by: NSriramakrishnan <srk@ti.com> Acked-by: NAnant Gole <anantgole@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2010 1 次提交
-
-
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2010 3 次提交
-
-
由 Christian Pellegrin 提交于
This patch addresses concerns about efficiency of handling incoming packets. Handling of interrupts is done in a threaded interrupt handler which has a smaller latency than workqueues. This change needed a rework of the locking scheme that was much simplified. Some other (more or less longstanding) bugs are fixed: utilization of just half of the RX buffers, useless wait for interrupt on open, more reliable reset sequence. The MERR interrupt is not used anymore: it overloads the CPU in error-passive state without any additional information. One shot mode is disabled because it's not clear if it can be handled efficiently on this CAN controller. Signed-off-by: NChristian Pellegrin <chripell@fsfe.org> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Cheblakov 提交于
This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) Changes since v1: - Added some defines for static inline int plx_pci_check_sja1000(...) - static struct pci_device_id plx_pci_tbl[] replaced by static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) - Typo fixed Signed-off-by: NPavel Cheblakov <P.B.Cheblakov@inp.nsk.su> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2010 2 次提交
-
-
由 Wolfgang Grandegger 提交于
Due to an invalid "#ifdef CONFIG_PPC_MPC5200", the real clock setup function was not called for the MPC5200. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Pellegrin 提交于
This patch adds error checking of ctrlmode values for CAN devices. As an example all availabe bits are implemented in the mcp251x driver. Signed-off-by: NChristian Pellegrin <chripell@fsfe.org> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2010 1 次提交
-
-
由 Oliver Hartkopp 提交于
To prevent the CAN drivers to operate on invalid socketbuffers the skbs are now checked and silently dropped at the xmit-function consistently. Also the netdev stats are consistently using the CAN data length code (dlc) for [rx|tx]_bytes now. Signed-off-by: NOliver Hartkopp <oliver@hartkopp.net> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2010 3 次提交
-
-
由 Wolfgang Grandegger 提交于
The main differences compared to the MSCAN on the MPC5200 are: - More flexibility in choosing the CAN source clock and frequency: Three different clock sources can be selected: "ip", "ref" or "sys". For the latter two, a clock divider can be defined as well. If the clock source is not specified by the device tree, we first try to find an optimal CAN source clock based on the system clock. If that is not possible, the reference clock will be used. - The behavior of bus-off recovery is configurable: To comply with the usual handling of Socket-CAN bus-off recovery, "recovery on request" is selected (instead of automatic recovery). Note that only MPC5121 Rev. 2 and later is supported. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfgang Grandegger 提交于
The start_xmit function of the MSCAN Driver did return improperly if the CAN dlc check failed (skb not freed and invalid return code). This patch adds a proper check of the frame lenght and data size and returns now correctly. The invalid skb packets are dropped silently as suggested by David Miller in the thread "[RFC] ndo_validate_skb: Let the netdev check a valid skb content" on the netdev mailing list. Furthermore, a typo has been fixed. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2010 1 次提交
-
-
由 Julia Lawall 提交于
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2009 1 次提交
-
-
由 Uwe Kleine-König 提交于
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2009 2 次提交
-
-
由 Geert Uytterhoeven 提交于
When building for Sun 3: drivers/net/can/mcp251x.c:1074: undefined reference to `dma_free_coherent' drivers/net/can/mcp251x.c:976: undefined reference to `dma_alloc_coherent' drivers/net/can/mcp251x.c:1050: undefined reference to `dma_free_coherent' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes. When reading the CAN controllers register the 4-bit value may contain values from 0 .. 15 which may exceed the reserved space in the socket buffer! The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8 should be reduced to 8 without any error reporting or frame drop. This patch introduces a new helper macro to cast a given 4-bit data length code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes. The different handlings in the rx path of the CAN netdevice drivers are fixed. Signed-off-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2009 1 次提交
-
-
由 Barry Song 提交于
Signed-off-by: NBarry Song <21cnbao@gmail.com> Signed-off-by: NH.J. Oertel <oe@port.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2009 1 次提交
-
-
由 Christian Pellegrin 提交于
Signed-off-by: NChristian Pellegrin <chripell@fsfe.org> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2009 10 次提交
-
-
由 Wolfram Sang 提交于
- move Kconfig entries to the subdirectory - do remaining renames of mpc52xx to mpc5xxx Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
Not all hardcoded values have been replaced as this made the code quite unreadable. IMHO this compromise serves the purpose of readability. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
Merge two functions into one. The result is smaller as they can now share some variables. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
As suggested by Wolfgang Grandegger. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
- use extern where apropriate - don't export symbols Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
The upper layer does not support it yet. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
- remove whitespaces - use ! and ?: when apropriate - make braces consistent Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-