Linus decided to go for another week so here's a few more updates - a
mixed bag here, a few minor diagnostic tweaks, some driver enhancements
and the dmaengine conversion for ep93xx drivers which was tested a while
ago and just waiting for a signoff.

Convert mx27vis-aic32x4 to platform driver.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NVinod Koul <vinod.koul@linux.intel.com>
Tested-by: NMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Otherwise a wrong position will be reported after restarting a stream and the
first few samples might be skipped.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Currently we can the accdet mutex from within DAPM when updating the device
state which means we take accdet then the CODEC mutex but we also do the
locking the other way around when responding to the jackdet IRQ. Move all
the jackdet use of the CODEC mutex out of the accdet lock to avoid this.
Since all the DAPM interactions depend only on a single threaded IRQ this
is still serialised.

The locking improvements in 3.5 allow a better solution there.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The McBSP driver stack has been moved, and rewritten resulting a single
driver - selected by CONFIG_SND_OMAP_SOC_MCBSP. There is no longer need to
have CONFIG_OMAP_MCBSP anymore.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonoie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The McBSP driver stack has been moved to ASoC. The CONFIG_OMAP_MCBSP will
be removed since the CONFIG_SND_OMAP_SOC_MCBSP will trigger to build the
McBSP (audio) drivers.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

We are setting SNDRV_PCM_HW_PARAM_BUFFER_SIZE based on
SNDRV_PCM_HW_PARAM_CHANNELS, not vice versa. This bug didn't
have much impact because the rules are evaluated multiple times
by the core, and intended value got set eventually.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Remove the no longer valid check for McBSP1 regarding to signal mux
selection (on OMAP4 McBSP4 has 6 pin setup).
Only clear the srgr2, pcr0 register configuration if the requested clock
configuration will actually going to touch it. In this way we can avoid
issues if the CLKR/FSR mux has been configured after the clock selection.

We are going to check for the valid McBSP port in the
omap_mcbsp_6pin_src_mux() function based on the validity of the mux_signal
callback (which is only valid for ports having 6 pin setup).
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Use single function for the CLKR/FSR mux configuration.
OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4
McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is
not correct name for all support OMAP versions
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Clock signal muxing, and functional clock related defines are only needed
in ASoC drivers.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: NMark Brown <broonoie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4.
Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that
we add the correct callback for the correct port across supported OMAP
versions.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

On OMAP4 we have one interrupt line per McBSP port.
At probe time tx, and rx irq value will be -ENXIO,
and only the tx irq will get corrected.
In omap_mcbsp_request if the rx_irq is not 0 we proceed,
and try to request the interrupt, which will fail on
OMAP4 (rx_irq == -6).
To avoid this error, clear the rx_irq at probe time
on OMAP4.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

If external source for the CLKS signal selection kept after the port is no
longer in use the system might refuse to go suspend.
There is also a chance that the external clock is not running when next
time the McBSP port is started which can result errors when we try to
access McBSP registers.
Reset the CLKS source back to PRCM source unconditionally.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Configure the WAKEUPEN register at the same time we configure the rest of
the McBSP registers.
In case of OMAP3+, if the sysclock has been reconfigured we are going to
disable McBSP for the duration of the clock change, which will reset the
McBSP registers. The WAKEUPEN register need to be configured later, so
the changes will be effective during runtime.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicrocom>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The parent functions of omap_st_start/stop also checks the validity of the
st_data pointer so we do not need to do it again inside of omap_st_start/stop
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

In this way we can save few lines, and have uniform way of initializing the
st_data in all functions.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Configure the DMA request line, port address, and stream name at
probe time instead of every time we start a stream.
These settings are static in the system.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Since the drivers has been merged, merge the two structures together.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Use devm_* where it is possible to save on cleanup path.
Start merging the two mcbsp file content.
Move pm_runtime_enable/disable calls to ASoC probe, remove from module
probe/remove time.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

We no longer need accessor functions for max_tx/rx_threshold, dma_op_mode
or for the FIFO size.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Use BIT() for bit position, correct field definition by adding mask to
them, and also adding the missing spaces around '<<'
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The driver for omap-mcbsp-dai no longer exist since it has been merged with
the omap-mcbsp driver.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The OMAP McBSP driver stack used to contain two different
drivers. One of them was used as kind low-level access to
the IP, while the other driver was the ASoC DAI driver.
There were global, shared structures, in different places,
the McBSP instances are reffered with id numbers (sometimes
0 based, in other cases 1 based id numbers).

Create one single driver for OMAP McBSP with name: omap-mcbsp.
Convert the old omap-mcbsp driver initially to be a library
for the omap-mcbsp DAI driver. With this change we can get rid
of all global variables, structures.

Further cleanup is coming...
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Move most of the content of the plat/mcbsp.h header file under
sound/soc/omap/ to help further cleanups.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

In order to consolidate the McBSP driver move it out from
arch/arm/plat-omap directory under sound/soc/omap/
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

Convert the plat-omap/mcbsp.c driver to be proper platform driver.
Remove the omap_mcbsp_init function call which was called from
mach-omap1/2/mcbsp.c to register the platform driver for the just
created platform device in the same function.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The cpu_is_omap4430() macro always return with 0. Use the correct
cpu_is_omap443x() to check for Panda revision.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>

The widget locking depends on some of the other locking changes which
are queued up for 3.5 not 3.4 so revert the locking changes and reapply
them in 3.5.

This reverts commit 66bf9321 and
96acc357.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>

This patch removes following registers from reg map defaults,

- Registers which are currently not used by driver
- Non existing registers
- Volatile registers
Signed-off-by: NAshish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Check /compatible rather than /model to determine the machine name.
The p1022ds older device trees get a different /model from the new
ones, while /compatible is consistent there, so checking /compatible
will save the bother of detecting older p1022ds device trees.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Marginally improve performance during startup.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Not having a DAI link set_fmt operation is perfectly normal and
should not be complaint.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Current DA7210 driver has I2C support using older register cache
methods. This patch updates it for latest regmap framework.

This has been tested on DA7210 EVB with Samsung SMDK6410 board.
Signed-off-by: NAshish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

add more sample rate for pxa-ssp, which are supported, such as 32KHz,
64KHz.
Signed-off-by: NQiao Zhou <zhouqiao@marvell.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix the following section mismatch warning:

WARNING: vmlinux.o(.data+0x35be8): Section mismatch in reference from the variable imx_audmux_driver to the function .init.text:imx_audmux_probe()
The variable imx_audmux_driver references
the function __init imx_audmux_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

If we do use regmap then regmap will take care of things for us. We
actually already have this check at a higher level for the current
users but this makes sure we do the right thing in the future too if
we need to.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>

Currently not all DAPM widget IO ops are holding their component mutex
(codec or platform). Make sure this is now held for DAPM widget IO operations.
Signed-off-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add mutex support for platform IO operations. e.g. can be used
for platform DAPM widget IO ops.
Signed-off-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>