- 05 5月, 2007 9 次提交
-
-
由 Sridhar Samudrala 提交于
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Update the SO_REUSEADDR handling to also check for listen state. This was muliple listening server sockets can't be created and they will not steal packets from each other. Reported by Paolo Galtieri <pgaltieri@mvista.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
We need to make sure that all destination ports are the same, since the association really must not connect to multiple different ports at once. This was reported on the sctp-impl list. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Aggregate the SPD info TLVs. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Aggregate the SAD info TLVs. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Sort out the MTU determination and handling in AF_RXRPC: (1) If it's present, parse the additional information supplied by the peer at the end of the ACK packet (struct ackinfo) to determine the MTU sizes that peer is willing to support. (2) Initialise the MTU size to that peer from the kernel's routing records. (3) Send ACKs rather than ACKALLs as the former carry the additional info, and the latter do not. (4) Declare the interface MTU size in outgoing ACKs as a maximum amount of data that can be stuffed into an RxRPC packet without it having to be fragmented to come in this computer's NIC. (5) If sendmsg() is given MSG_MORE then it should allocate an skb of the maximum size rather than one just big enough for the data it's got left to process on the theory that there is more data to come that it can append to that packet. This means, for example, that if AFS does a large StoreData op, all the packets barring the last will be filled to the maximum unfragmented size. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
Add missing section annotations and found and fixed some Coding Style issues. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
-
由 Jennifer Hunt 提交于
With the inital implementation we missed to implement a skb backlog queue . The result is that socket receive processing tossed packets. Since AF_IUCV connections are working synchronously it leads to connection hangs. Problems with read, close and select also occured. Using a skb backlog queue is fixing all of these problems . Signed-off-by: NJennifer Hunt <jenhunt@us.ibm.com> Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Remove bogus BUG_ON(mutex_is_locked(nlk_sk(sk)->cb_mutex)), when the netlink_kernel_create caller specifies an external mutex it might validly be locked. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2007 22 次提交
-
-
由 Eric Dumazet 提交于
1) struct ip6_flowlabel : moves 'users' field to avoid two 32bits holes for 64bit arches. Shrinks by 8 bytes sizeof(struct ip6_flowlabel) 2) ipv6_addr_cmp() and ipv6_addr_copy() dont need (void *) casts : Compiler might take into account natural alignement of in6_addr structs to emit better code for memcpy()/memcmp() Casts to (void *) force byte accesses. 3) ipv6_addr_prefix() optimization : Better to clear whole struct, as compiler can emit better code for memset(addr, 0, 16) (2 stores on x86_64), and avoid some conditional branches. # size vmlinux.after vmlinux.before text data bss dec hex filename 5262262 647612 557432 6467306 62aeea vmlinux.after 5262550 647612 557432 6467594 62b00a vmlinux.before thats 288 bytes saved. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Aji 提交于
When the server drops its connection, NFS client reconnects using the same socket after disconnecting. If the new connection's SYN,ACK doesn't contain the TCP timestamp option and the old connection's did, tp->tcp_header_len is recomputed assuming no timestamp header but tp->rx_opt.tstamp_ok remains set. Then tcp_build_and_update_options() adds in a timestamp option past the end of the allocated TCP header, overwriting TCP data, or when the data is in skb_shinfo(skb)->frags[], overwriting skb_shinfo(skb) causing a crash soon after. (The issue was debugged from such a crash.) Similarly, wscale_ok and sack_ok also get set based on the SYN,ACK packet but not reset on disconnect, since they are zeroed out at initialization. The patch zeroes out the entire tp->rx_opt struct in tcp_disconnect() to avoid this sort of problem. Signed-off-by: NSrinivas Aji <Aji_Srinivas@emc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Remove the check for skb->len greater than MTU when doing TSO. When the destination has a smaller MSS than the source, a TSO packet may be smaller than the MTU at the source and we still need to process it as a TSO packet. Thanks to Brian Ristuccia <bristuccia@starentnetworks.com> for reporting the problem. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelianov 提交于
Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Reuse limited slow-start (RFC3742) included into tcp_cong instead of having another implementation in High Speed TCP. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 1.5.10. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Fix the code to print PCI or PCIE bus information for all devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The 5709 supports the one-shot MSI handler similar to some of the tg3 chips. In this mode, the MSI disables itself automatically until it is re-enabled at the end of NAPI poll. Put the request_irq/free_irq logic in common procedures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Restructure by adding bnx2_phy_event_is_set() to make code cleaner and easier to understand. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The indirect register access method will be used by more than one caller in BH context (NAPI poll and timer), so a spinlock is required. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add PCI ID and code to support the 5709 Serdes PHY. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add some common procedures to handle enabling and disabling 2.5G. Add some missing code to resolve flow control. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The 5709 Serdes device uses non-standard MII register offsets. This re-structuring will make it easier to support 5709 Serdes. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add ipv6 TSO support in firmware. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This fixes the problem of not counting all dropped multicast packets. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This is needed to save the MSI state which will be lost during suspend. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Hot-plug scripts can call bnx2_open() as soon as register_netdev() is called in bnx2_init_one(). We need to call pci_set_drvdata() and setup everything before calling register_netdev(). netif_carrier_off() also needs to be moved to bnx2_open() to avoid race conditions with the irq. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA limitation as some of the tg3 chips. Set dma_mask and persistent DMA mask to 40-bit to workaround. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Tweak registers and memory test range for 5709. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The device may be in D3hot state and should not allow MII register access. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add 2.5G supported and advertising bit definitions. 2.5G is supported by the bnx2 driver. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2007 9 次提交
-
-
由 Patrick McHardy 提交于
Consolidate the common push/pull sequences into a few helper functions. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
I needed to use this recently to talk to a Cisco server. In my case I only did SNAT while the Cisco server used a different address for RTP traffic than the one for SIP. I discovered that nf_nat_sip NATed the RTP address to the SIP one which was unnecessary but OK. However, in doing so it did not DNAT the destination address on the RTP traffic to the Cisco back to the original RTP address. This patch corrects this by noting down the RTP address and using it when the expectation fires. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jorge Boncompte 提交于
While porting some changes of the 2.6.21-rc7 pptp/proto_gre conntrack and nat modules to a 2.4.32 kernel I noticed that the gre_key function returns a wrong pointer to the GRE key of a version 0 packet thus corrupting the packet payload. The intended behaviour for GREv0 packets is to act like nf_conntrack_proto_generic/nf_nat_proto_unknown so I have ripped the offending functions (not used anymore) and modified the nf_nat_proto_gre modules to not touch version 0 (non PPTP) packets. Signed-off-by: NJorge Boncompte <jorge@dti2.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also accept the --random option for DNAT to allow randomly selecting a destination port from the given range. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
TCP has a transitional state when SACK is not in use during which this invariant is temporarily broken. Without SACK, tcp_clean_rtx_queue does not decrement sacked_out. Therefore calls to tcp_sync_left_out before sacked_out is again corrected by tcp_fastretrans_alert can trigger this trap as sacked_out still has couple of segments that are already out of window. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Adjust the new netdevice scanning code provided by Patrick McHardy: (1) Restore the function banner comments that were dropped. (2) Rather than using an array size of 6 in some places and an array size of ETH_ALEN in others, pass a pointer instead and pass the array size through so that we can actually check it. (3) Do the buffer fill count check before checking the for_primary_ifa condition again. This permits us to skip that check should maxbufs be reached before we run out of interfaces. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace the large and complicated rtnetlink client by two simple functions for getting the MAC address for the first ethernet device and building a list of IPv4 addresses. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add __dev_getfirstbyhwtype for callers that don't want a reference but some data from the device and thus need to take the rtnl anyway. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The interface array is not freed on exit. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-