Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

You can obtain the firmware at http://ipw2200.sf.net/firmware.phpSigned-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

configured.

Countermeasures default to being turned off when wpa_supplicant runs,
regardless of if TKIP is being used.  They are only turned on if a TKIP
is running.  The warning we were printing is therefore not needed.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Wireless extensions moved the get_wireless_stats handler from being
in net_device into wireless_handler.
Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

The problem is caused by the patch in bug455 -- Channel change flood
generates fatal error.

The patch set the DISASSOCIATING status bit after sending the command.
The process was scheduled out when waiting for the command to be sent to
the card. The disassociated notification clears the DISASSOCIATING bit
in the tasklet before the process set the bit.

Move the bit setting code before sending the command now.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

The PF_SYNCTHREAD check was introduced to try and remain compatible with
SWSUSP2.  This check is no longer needed with newer versions.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

error when it tries to auth to a WPA ap. The patch filters out WPA
networks if the card is not wpa enabled when selecting network to
associate to.
Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NMike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

so you can cross-reference errno.h easily).
Signed-off-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Because of the frequent channel change, it is possible that when we are
try to associate with channel 1 (authenticated but not associated).
Another channel change comes at this time, then the driver will issue
disassociate command to the firmware which will cause the fatal error.

It seems that the association/disassociation procedure should not be
interrupted.

The patch attached adds test on STATUS_ASSOCIATING | STATUS_DISASSOCIATING
in ipw_send_cmd(), when ensures that commands will not be sent to firmware
when we are in these two status.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Fixed copyright date in ipw2200.h
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

(handle_probe_response, handle_beacon, handle_association_response).

Fixed a problem with ipw_send_cmd() returning non-zero on success.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

keep regulatory consistency in one location.

Signed-off-by: James Ketrenos

You can now specify via the module parameter 'cmdlog' to allocate a
ring buffer for caching host commands sent to the firmware. They can
then be dumped at any time via the sysfs entry 'cmd_log'
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

codes to the caller and changed ipw_send_cmd itself to print the error
message to the syslog indicating which command failed to be sent.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

via sysfs even if debugging disabled.  When a firmware error is
captured, it will be dumped to the kernel log (if debug enabled) and
captured in memory to be retrieved via sysfs.

If an error has already been captured, subsequent errors will be
dropped.

The existing error can be cleared by writing to the error log entry.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

with request_scan being called before initialized if invoked from
insmod, resulting in no association occurring during boot until iwlist
scan is run.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

If we configure the wep keys after creating the ibss network, the
beacons of this network will not show correctly (it still shows "key
off" in iwlist scan report). This is because we don't update the
beacon info in firmware.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

support hardware fragmentation.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

iwconfig matches what their hardware can actually do in regard to
supported channel maps, etc.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>