- 11 7月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
This patch moves the run-time null finup/digest checks to the shash_prepare_alg function which is run at registration time. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch replaces the full descriptor export with an export of the partial hash state. This allows the use of a consistent export format across all implementations of a given algorithm. This is useful because a number of cases require the use of the partial hash state, e.g., PadLock can use the SHA1 hash state to get around the fact that it can only hash contiguous data chunks. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 09 7月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
This patch allows crypto_drop_spawn to be called on spawns that have not been initialised or have failed initialisation. This fixes potential crashes during initialisation without adding special case code. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds the helper shash_instance_ctx which is the shash analogue of crypto_instance_ctx. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 08 7月, 2009 10 次提交
-
-
由 Herbert Xu 提交于
This patch fixes crypto_shash_import to propagate the value returned by reinit. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch simplifies the default digest function by using finup. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds __crypto_shash_cast which turns a crypto_tfm into crypto_shash. It's analogous to the other __crypto_*_cast functions. It hasn't been needed until now since no existing shash algorithms have had an init function. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds crypto_shash_ctx_aligned which will be needed by hmac after its conversion to shash. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds shash_register_instance so that shash instances can be registered without bypassing the shash checks applied to normal algorithms. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds the helper shash_attr_alg2 which locates a shash algorithm based on the information in the given attribute. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds the helper crypto_attr_alg2 which is similar to crypto_attr_alg but takes an extra frontend argument. This is intended to be used by new style algorithm types such as shash. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds the functions needed to create and use shash spawns, i.e., to use shash algorithms in a template. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch modifies the spawn infrastructure to support new style algorithms like shash. In particular, this means storing the frontend type in the spawn and using crypto_create_tfm to allocate the tfm. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds shash_instance and the associated alloc/free functions. This is meant to be an instance that with a shash algorithm under it. Note that the instance itself doesn't have to be shash. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 07 7月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
This patch adds a new argument to crypto_alloc_instance which sets aside some space before the instance for use by algorithms such as shash that place type-specific data before crypto_alg. For compatibility the function has been renamed so that existing users aren't affected. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch introduces the template->create function intended to replace the existing alloc function. The intention is for create to handle the registration directly, whereas currently the caller of alloc has to handle the registration. This allows type-specific code to be run prior to registration. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 7月, 2009 2 次提交
-
-
As reported by Eric Sesterhenn the re-allocation of the cipher in reset leads to: |BUG: sleeping function called from invalid context at kernel/rwsem.c:21 |in_atomic(): 1, irqs_disabled(): 0, pid: 4926, name: modprobe |INFO: lockdep is turned off. |Pid: 4926, comm: modprobe Tainted: G M 2.6.31-rc1-22297-g52989765 #24 |Call Trace: | [<c011dd93>] __might_sleep+0xf9/0x101 | [<c0777aa0>] down_read+0x16/0x68 | [<c048bf04>] crypto_alg_lookup+0x16/0x34 | [<c048bf52>] crypto_larval_lookup+0x30/0xf9 | [<c048c038>] crypto_alg_mod_lookup+0x1d/0x62 | [<c048c13e>] crypto_alloc_base+0x1e/0x64 | [<c04bf991>] reset_prng_context+0xab/0x13f | [<c04e5cfc>] ? __spin_lock_init+0x27/0x51 | [<c04bfce1>] cprng_init+0x2a/0x42 | [<c048bb4c>] __crypto_alloc_tfm+0xfa/0x128 | [<c048c153>] crypto_alloc_base+0x33/0x64 | [<c04933c9>] alg_test_cprng+0x30/0x1f4 | [<c0493329>] alg_test+0x12f/0x19f | [<c0177f1f>] ? __alloc_pages_nodemask+0x14d/0x481 | [<d09219e2>] do_test+0xf9d/0x163f [tcrypt] | [<d0920de6>] do_test+0x3a1/0x163f [tcrypt] | [<d0926035>] tcrypt_mod_init+0x35/0x7c [tcrypt] | [<c010113c>] _stext+0x54/0x12c | [<d0926000>] ? tcrypt_mod_init+0x0/0x7c [tcrypt] | [<c01398a3>] ? up_read+0x16/0x2b | [<c0139fc4>] ? __blocking_notifier_call_chain+0x40/0x4c | [<c014ee8d>] sys_init_module+0xa9/0x1bf | [<c010292b>] sysenter_do_call+0x12/0x32 because a spin lock is held and crypto_alloc_base() may sleep. There is no reason to re-allocate the cipher, the state is resetted in ->setkey(). This patches makes the cipher allocation a one time thing and moves it to init. Reported-by: NEric Sesterhenn <eric.sesterhenn@lsexperts.de> Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
The current code uses a mix of sping_lock() & spin_lock_irqsave(). This can lead to deadlock with the correct timming & cprng_get_random() + cprng_reset() sequence. I've converted them to bottom half locks since all three user grab just a BH lock so this runs probably in softirq :) Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 02 7月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
This patch adds the support for testing specific implementations. This should only be used in very specific situations. Right now this means specific implementations of random number generators. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 25 6月, 2009 3 次提交
-
-
由 Herbert Xu 提交于
As it stands we use chainiv for sync algorithms and eseqiv for async algorithms. However, when there is more than one CPU chainiv forces all processing to be serialised which is usually not what you want. Also, the added overhead of eseqiv isn't that great. Therefore this patch changes the default sync geniv on SMP machines to eseqiv. For the odd situation where the overhead is unacceptable then chainiv is still available as an option. Note that on UP machines chainiv is still preferred over eseqiv for sync algorithms. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
When a sync givcipher algorithm is requested, if an async version of the same algorithm already exists, then we will loop forever without ever constructing the sync version based on a blkcipher. This is because we did not include the requested type/mask when getting a larval for the geniv algorithm that is to be constructed. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 24 6月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
Until hash test vectors grow longer than 256 bytes, the only purpose of the check is to generate a gcc warning. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Roland Dreier 提交于
When the aes-intel module is loaded on a system that does not have the AES instructions, it prints Intel AES-NI instructions are not detected. at level KERN_ERR. Since aes-intel is aliased to "aes" it will be tried whenever anything uses AES and spam the console. This doesn't match existing practice for how to handle "no hardware" when initializing a module, so downgrade the message to KERN_INFO. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 6月, 2009 1 次提交
-
-
由 Neil Horman 提交于
The ANSI CPRNG has no dependence on FIPS support. FIPS support however, requires the use of the CPRNG. Adjust that depedency relationship in Kconfig. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 19 6月, 2009 3 次提交
-
-
由 Herbert Xu 提交于
We should return 0/-ENOENT instead of 1/0 when testing by name. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
The RNG should work with FIPS disabled. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Steffen Klassert 提交于
This adds the 'alg' module parameter to be able to test an algorithm by name. If the algorithm type is not ad-hoc clear for a algorithm (e.g. pcrypt, cryptd) it is possilbe to set the algorithm type with the 'type' module parameter. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 18 6月, 2009 12 次提交
-
-
由 Jarod Wilson 提交于
Just started running fips cavs test vectors through an s390x system for giggles, and discovered that I missed patching s390's arch-specific des3 implementation w/an earlier des3 patch to permit weak keys. This change adds the same flag tweaks as ad79cdd7 (crypto: des3_ede - permit weak keys unless REQ_WEAK_KEY set) for s390's des3 implementation, yields expected test results now. Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Neil Horman 提交于
FIPS-140 requires that all random number generators implement continuous self tests in which each extracted block of data is compared against the last block for repetition. The ansi_cprng implements such a test, but it would be nice if the hw rng's did the same thing. Obviously its not something thats always needed, but it seems like it would be a nice feature to have on occasion. I've written the below patch which allows individual entropy stores to be flagged as desiring a continuous test to be run on them as is extracted. By default this option is off, but is enabled in the event that fips mode is selected during bootup. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Huang Ying 提交于
kernel_fpu_begin/end used preempt_disable/enable, so sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Huang Ying 提交于
Because AES-NI instructions will touch XMM state, corresponding code must be enclosed within kernel_fpu_begin/end, which used preempt_disable/enable. So sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Huang Ying 提交于
Original implementation of aesni_cbc_dec do not save IV if input length % 4 == 0. This will make decryption of next block failed. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Chuck Ebbert 提交于
Extend previous workarounds for the prefetch bug to cover CBC mode, clean up the code a bit. Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Acked-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Chuck Ebbert 提交于
The VIA Nano processor has a bug that makes it prefetch extra data during encryption operations, causing spurious page faults. Extend existing workarounds for ECB mode to copy the data to an temporary buffer to avoid the problem. Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Acked-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Matthew Wilcox 提交于
ia64 was assigning resources to root busses after allocations had been made for child busses. Calling pcibios_setup_root_windows() from pcibios_fixup_bus() solves this problem by assigning the resources to the root bus before child busses are scanned. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Tested-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
Instead of starting from the iomem or ioport roots, start from the parent bus' resources. This fixes a bug where child resources would appear above their parents resources if they had the same size. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Tested-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Convert ia64 to use int-ll64.h [IA64] Fix build error in paravirt_patchlist.c [IA64] ia64 does not need umount2() syscall [IA64] hook up new rt_tgsigqueueinfo syscall [IA64] msi_ia64.c dmar_msi_type should be static [IA64] remove obsolete hw_interrupt_type [IA64] remove obsolete irq_desc_t typedef [IA64] remove obsolete no_irq_type [IA64] unexport fpswa.h
-