In the punch_hole(), let's convert inline_data all the time for simplicity and
to avoid potential deadlock conditions.
It is pretty much not a big deal to do this.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch locates checking the inline_data prior to calling f2fs_lock_op()
in truncate_blocks(), since getting the lock is unnecessary.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch describes the inline_data support in f2fs document.
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Hook inline data read/write, truncate, fallocate, setattr, etc.

Files need meet following 2 requirement to inline:
 1) file size is not greater than MAX_INLINE_DATA;
 2) file doesn't pre-allocate data blocks by fallocate().

FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.

While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].

On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NWeihong Xu <weihong.xu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Functions to implement inline data read/write, and move inline data to
normal data block when file size exceeds inline data limitation.
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NWeihong Xu <weihong.xu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, we need to calculate the max orphan num when we try to acquire an
orphan inode, but it's a stable value since the super block was inited. So
converting it to a field of f2fs_sb_info and use it directly when needed seems
a better choose.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The f2fs supports 4KB block size. If user requests dwrite with under 4KB data,
it allocates a new 4KB data block.
However, f2fs doesn't add zero data into the untouched data area inside the
newly allocated data block.

This incurs an error during the xfstest #263 test as follow.

263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad)
	--- 263.out	2013-03-09 03:37:15.043967603 +0900
	+++ 263.out.bad	2013-12-27 04:20:39.230203114 +0900
	@@ -1,3 +1,976 @@
	QA output created by 263
	fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
	-fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
	+fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
	+truncating to largest ever: 0x12a00
	+truncating to largest ever: 0x75400
	+fallocating to largest ever: 0x79cbf
	...
	(Run 'diff -u 263.out 263.out.bad' to see the entire diff)
	Ran: 263
	Failures: 263
	Failed 1 of 1 tests

It turns out that, when the test tries to write 2KB data with dio, the new dio
path allocates 4KB data block without filling zero data inside the remained 2KB
area. Finally, the output file contains a garbage data for that region.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When get_dnode_of_data() in get_data_block() returns a successful dnode, we
should put the dnode.
But, previously, if its data block address is equal to NEW_ADDR, we didn't do
that, resulting in a deadlock condition.
So, this patch splits original error conditions with this case, and then calls
f2fs_put_dnode before finishing the function.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.

   struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i;
-> struct f2fs_inode *ri = F2FS_INODE(inode_page);
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In current flow, we will get Null return value of f2fs_find_entry in
recover_dentry when name.len is bigger than F2FS_NAME_LEN, and then we
still add this inode into its dir entry.
To avoid this situation, we must check filename length before we use it.

Another point is that we could remove the code of checking filename length
In f2fs_find_entry, because f2fs_lookup will be called previously to ensure of
validity of filename length.

V2:
 o add WARN_ON() as Jaegeuk Kim suggested.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When we rename a dir to new name which is not exist previous,
we will set pino of parent inode with ino of child inode in f2fs_set_link.
It destroy consistency of pino, it should be fixed.

Thanks for previous work of Shu Tan.
Signed-off-by: NShu Tan <shu.tan@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When using the f2fs_io_info in the low level, we still need to merge the
rw and rw_flag, so use the rw to hold all the io flags directly,
and remove the rw_flag field.

ps.It is based on the previous patch:
f2fs: move all the bio initialization into __bio_alloc
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Move all the bio initialization into __bio_alloc, and some minor cleanups are
also added.

v3:
  Use 'bool' rather than 'int' as Kim suggested.

v2:
  Use 'is_read' rather than 'rw' as Yu Chao suggested.
  Remove the needless initialization of bio->bi_private.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a description about small_disacrds in the f2fs document.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch enhances writing dirty meta pages collectively in background.
During the file data writes, it'd better avoid to write small dirty meta pages
frequently.
So let's give a chance to collect a number of dirty meta pages for a while.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, f2fs doesn't support direct IOs with high performance, which throws
every write requests via the buffered write path, resulting in highly
performance degradation due to memory opeations like copy_from_user.

This patch introduces a new direct IO path in which every write requests are
processed by generic blockdev_direct_IO() with enhanced get_block function.

The get_data_block() in f2fs handles:
1. if original data blocks are allocates, then give them to blockdev.
2. otherwise,
  a. preallocate requested block addresses
  b. do not use extent cache for better performance
  c. give the block addresses to blockdev

This policy induces that:
- new allocated data are sequentially written to the disk
- updated data are randomly written to the disk.
- f2fs gives consistency on its file meta, not file data.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.

Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.

This patch suggests 5 polcies and their triggering conditions as follows.

[sysfs entry name = ipu_policy]

0: F2FS_IPU_FORCE       all the time,
1: F2FS_IPU_SSR         if SSR mode is activated,
2: F2FS_IPU_UTIL        if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL    if SSR mode is activated and FS utilization is over
                        threashold,
4: F2FS_IPU_DISABLE    disable IPU. (=default option)

[sysfs entry name = min_ipu_util]

This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.

For more details, see need_inplace_update() in segment.h.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

insmod f2fs.ko is failed after insmod and rmmod firstly.

$ sudo insmod fs/f2fs/f2fs.ko
insmod: error inserting 'fs/f2fs/f2fs.ko': -1 Cannot allocate memory

-- dmesg --
kmem_cache_sanity_check (free_nid): Cache name already exists.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We need to get a trace before submit_bio, since its bi_sector is remapped during
the submit_bio.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces f2fs_io_info to mitigate the complex parameter list.

struct f2fs_io_info {
	enum page_type type;		/* contains DATA/NODE/META/META_FLUSH */
	int rw;				/* contains R/RS/W/WS */
	int rw_flag;			/* contains REQ_META/REQ_PRIO */
}

1. f2fs_write_data_pages
 - DATA
 - WRITE_SYNC is set when wbc->WB_SYNC_ALL.

2. sync_node_pages
 - NODE
 - WRITE_SYNC all the time

3. sync_meta_pages
 - META
 - WRITE_SYNC all the time
 - REQ_META | REQ_PRIO all the time

 ** f2fs_submit_merged_bio() handles META_FLUSH.

4. ra_nat_pages, ra_sit_pages, ra_sum_pages
 - META
 - READ_SYNC

Cc: Fan Li <fanofcode.li@samsung.com>
Cc: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages
submits last write requests by sync_mode flags callers pass.

This causes a performance problem since continuous pages with different sync flags
can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous
requests often take more time.

This patch makes the following modifies to DATA writebacks:

1. every page will be written back using the sync mode caller pass.
2. only pages with the same sync mode can be merged in one bio request.

These changes are restricted to DATA pages.Other types of writebacks are modified
To remain synchronous.

In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% ,
and this patch has no obvious impact on other performance tests.
Signed-off-by: NFan Li <fanofcode.li@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.

Change log from v1:
 - Don't add unlikely for the NULL test and error test: advised by Andi Kleen.

Cc: Chao Yu <chao2.yu@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

As we know, some of our branch condition will rarely be true. So we could add
'unlikely' to let compiler optimize these code, by this way we could drop
unneeded 'jump' assemble code to improve performance.

change log:
 o add *unlikely* as many as possible across the whole source files at once
   suggested by Jaegeuk Kim.
Suggested-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In find_fsync_dnodes() and recover_data(), our flow is like this:

->f2fs_submit_page_bio()
	-> f2fs_put_page()
		-> page_cache_release()	---- page->_count declined to zero.
->__free_pages()
	-> put_page_testzero() ---- page->_count will be declined again.

We will get a segment fault in put_page_testzero when CONFIG_DEBUG_VM
is on, or return MM with a bad page with wrong _count num.

So let's just release this page.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for
simplification of code.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This minor change for the naming conventions of debugfs_root
to avoid any possible conflicts to the other filesystem.
Signed-off-by: NYounger Liu <younger.liucn@gmail.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
[Jaegeuk Kim: change the patch name]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When debugfs_create_file() failed in f2fs_create_root_stats(),
debugfs_root should be remove.
Signed-off-by: NYounger Liu <liuyiyang@hisense.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment
one by one, it makes low performance. So let's merge contiguous pages and
readahead for better performance.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: adjust the new bio operations]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch integrates redundant bio operations on read and write IOs.

1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
   bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
   submit_write_page.
Reviewed-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com >
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously f2fs allocates its own bi_private data structure all the time even
though we don't use it. But, can we remove this bi_private allocation?

This patch removes such the additional bi_private allocation.

1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb.
 - This removes the usecases of bi_private in end_io.

2. Use bi_private only when we really need it.
 - The bi_private is used only when the checkpoint procedure is conducted.
 - When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio
completion.
 - Since we have no dependancies to remove bi_private now, let's just use
 bi_private pointer as the completion pointer.
Reviewed-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The recover_orphan_inodes() returns no error all the time, so we don't need to
check its errors.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should return error if we do not get an updated page in find_date_page
when f2fs_readpage failed.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The inode_page_locked should be a boolean variable.

struct dnode_of_data {
	struct inode *inode;            /* vfs inode pointer */
	struct page *inode_page;        /* its inode page, NULL is possible */
	struct page *node_page;         /* cached direct node page */
	nid_t nid;                      /* node id of the direct node block */
	unsigned int ofs_in_node;       /* data offset in the node page */
==>	bool inode_page_locked;         /* inode page is locked or not */
	block_t data_blkaddr;           /* block address of the node block */
};
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The void *wait in bio_private is used for waiting completion of checkpoint bio.
So we don't need to use its type as void, but declare it as completion type.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Because we will write node summaries when do_checkpoint with umount flag,
our number of max orphan blocks should minus NR_CURSEG_NODE_TYPE additional.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NShu Tan <shu.tan@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Because FALLOC_FL_PUNCH_HOLE flag must be ORed with FALLOC_FL_KEEP_SIZE
in fallocate, so we could remove the useless 'keep size' branch code which
will never be excuted in punch_hole.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NFan Li <fanofcode.li@samsung.com>
[Jaegeuk Kim: remove an unnecessary parameter togather]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes the unnecessary condition checks on:

fs/f2fs/gc.c:667 do_garbage_collect() warn: 'sum_page' isn't an ERR_PTR
fs/f2fs/f2fs.h:795 f2fs_put_page() warn: 'page' isn't an ERR_PTR
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch fixes some bit overflows by the shift operations.

Dan Carpenter reported potential bugs on bit overflows as follows.

fs/f2fs/segment.c:910 submit_write_page()
	warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/checkpoint.c:429 get_valid_checkpoint()
	warn: should '1 << ()' be a 64 bit type?
fs/f2fs/data.c:408 f2fs_readpage()
	warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:457 submit_read_page()
	warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:525 get_data_block_ro()
	warn: should 'i << blkbits' be a 64 bit type?
Bug-Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Fix a potential out of range issue introduced by commit:
22fb72225a
f2fs: simplify write_orphan_inodes for better readable
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>