The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.

Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.

v3:
	* remove out-comented line in drm_gem_framebuffer_helper.h
	  (Maxime)
v2:
	* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
	* add tutorial-style documentation
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de

Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
  Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
  platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
  maybe a bit too much, hence the num_ioctls assignment prevents a
  const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
  from me.
- legacy drivers, because legacy requires non-const drm_driver.

Note that for armada I also went ahead and made the ioctl array const.

Only cc'ing the driver people who've not been converted (everyone else
is way too much).

v2: Fix one misplaced const static, should be static const (0day)

v3:
- Improve commit message (Sam)
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

The atomic helpers try really hard to not lose track of things,
duplicating enabled tracking in the driver is at best confusing.
Double-enabling or disabling is a bug in atomic helpers.

In the fb_dirty function we can just assume that the fb always exists,
simple display pipe helpers guarantee that the crtc is only enabled
together with the output, so we always have a primary plane around.

Now in the update function we need to be a notch more careful, since
that can also get called when the crtc is off. And we don't want to
upload frames when that's the case, so filter that out too.
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch

Rename the macro to DRM_GEM_CMA_DRIVER_OPS_VMAP to align naming with
SHMEM helpers and drm_gem_cma_prime_import_sg_table_vmap(). An variant of
the macro is provided for drivers that override the default .dumb_create
callback. Adapt drivers to the changes.

v3:
	* rename macro to signal implicit vmap on imported buffers
v2:
	* provide DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-3-tzimmermann@suse.de

Already using devm_drm_dev_init, so very simple replacment.
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-15-daniel.vetter@ffwll.ch

Allows us to drop the drm_driver.release callback from all
drivers, and remove the mipi_dbi_release() function.

This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().

v2: Explain why this cleanup is possible (Laurent).

v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Tested-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-49-daniel.vetter@ffwll.ch

7/7 drivers agree that's the right choice, let's do this.

This avoids duplicating the same old error checking code over all 7
drivers, which is the motivation here.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-48-daniel.vetter@ffwll.ch

They all share mipi_dbi_release so we need to switch them all
together. With this we can drop the final kfree from the release
function.

Aside, I think we could perhaps have a tiny additional helper for
these mipi_dbi drivers, the first few lines around devm_drm_dev_init
are all the same (except for the drm_driver pointer).
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NNoralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-6-daniel.vetter@ffwll.ch

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
	* separate commit from core vblank changes
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-12-tzimmermann@suse.de

The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.

v2: add comment about the rename (David Lechner)

Cc: David Lechner <david@lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-4-jani.nikula@intel.com

The drm in tinydrm is superfluous so rename to tiny.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org

This moves mipi-dbi to be a core helper with the name drm_mipi_dbi.

Fixup include's in drivers.
Move the docs entry and delete tinydrm.rst.
Delete the last tinydrm todo entry.

v2: Make DRM_MIPI_DBI tristate to enable it being built as a module.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org

Split struct mipi_dbi into an interface part and a display pipeline part.
The interface part can be used by drivers that need to initialize the
controller, but that won't upload the framebuffer over this interface.

MIPI DBI supports 3 interface types:
- A. Motorola 6800 type parallel bus
- B. Intel 8080 type parallel bus
- C. SPI type with 3 options:

I've embedded the SPI type specifics in the mipi_dbi struct to avoid
adding unnecessary complexity. If more interface types will be supported
in the future, the type specifics might have to be split out.

Rename functions to match the new struct mipi_dbi_dev:
- drm_to_mipi_dbi() -> drm_to_mipi_dbi_dev().
- mipi_dbi_init*() -> mipi_dbi_dev_init*().

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-5-noralf@tronnes.org

struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.

tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbidev' where it refers to the pipeline part of struct mipi_dbi.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-4-noralf@tronnes.org

struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.

tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbi' where it refers to the interface part of struct mipi_dbi.

Functions that use both future parts will have both variables temporarily
pointing to the same structure.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-3-noralf@tronnes.org

The MIPI DBI standard support more pixel formats than what this helper
supports. Add an init function that lets the driver use different
format(s). This avoids open coding mipi_dbi_init() in st7586.

st7586 sets preferred_depth but this is not necessary since it only
supports one format.

v2: Forgot to remove the mipi->rotation assignment in st7586,
    mipi_dbi_init_with_formats() handles it.

Cc: David Lechner <david@lechnology.com>
Acked-by: NDavid Lechner <david@lechnology.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NDavid Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org

tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Use the new SPI connector type instead.

X server will now list the connector as Unknown instead of Virtual:

X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0    0.00  320 320 320 320  240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0

I won't chase down and fix userspace, but the new connector type will
trickle out to userspace eventually.

v2: Split patch in core and driver changes, expand commit message (Daniel)

Cc: David Lechner <david@lechnology.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-3-noralf@tronnes.org

Split out to make the functional changes stick out more.

All places where DRIVER_PRIME was used have been removed in previous
patches already.

v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE.

v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE.

v4: Don't add a space in i915_drv.c (Sam)

v5: Add note that previous patches removed all the DRIVER_PRIME users
already (Emil).

v6: Fixupe ingenic (new driver) while applying.

Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: spice-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to copy/paste error, the fbdev format was changed to 32bpp = XRGB8888
which is an emulated format for the RGB565 drivers. Revert to to using the
fallback which is dev->mode_config.preferred_depth for the drivers that
set it or 32bpp for those that don't (repaper, st7586).

Fixes: 3eba3922 ("drm/tinydrm: Drop using tinydrm_device")
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410124345.25945-1-noralf@tronnes.org

Also rename them from tinydrm_* to drm_fb_*
Pure code motion, no functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-2-kraxel@redhat.com

This protects device resources from use after device removal.

There are 3 ways for driver-device unbinding to happen:
- The driver module is unloaded causing the driver to be unregistered.
  This can't happen as long as there are open file handles because a
  reference is taken on the module.
- The device is removed (Device Tree overlay unloading).
  This can happen at any time.
- The driver sysfs unbind file can be used to unbind the driver from the
  device. This can happen any time.

v2: Since drm_atomic_helper_shutdown() has to be called after
    drm_dev_unplug() we don't want do block ->disable after unplug.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org

Use devm_drm_dev_init() and drop using tinydrm_device.

v2: devm_drm_dev_register() was dropped so add driver release callbacks.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-6-noralf@tronnes.org

Add a function to derive mipi_dbi from drm_device now that tinydrm_device
is going away.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-8-noralf@tronnes.org

It's just a wrapper around drm_atomic_helper_shutdown() now.
Also store drm_device in the drvdata field, since that's what's used.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-7-noralf@tronnes.org

Rework function signature so tinydrm_device can be avoided.

Move definition to tinydrm-helpers.h so tinydrm.h can be deleted in a
later patch.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-6-noralf@tronnes.org

This adds a helper macro to specify modes that only contain info about
resolution.

v2: Actually set the width and height (Ilia Mirkin)

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-5-noralf@tronnes.org

This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty
handler. All flushing will now happen in the pipe functions.

Also enable the damage plane property for all except repaper which can
only do full updates.

ili9225:
This change made ili9225_init() equal to mipi_dbi_init() so use it.

v3: Include vblank header (Sam)
    ili9225 and st7586 can't use mipi_dbi_enable_flush() (David)

v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL
    (kbuild test robot)

Cc: David Lechner <david@lechnology.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Tested-by: NDavid Lechner <david@lechnology.com>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org

This prepares for the switch to drm_atomic_helper_dirtyfb() in the next
patch. The damage helper returns a drm_rect so switch to that everywhere
including using a pointer in the dirty functions.

This is a non-functional change except for the debug print which looks a
bit different.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-4-noralf@tronnes.org

drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/

To prepare tinydrm/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h

To avoid that tinydrm.h became "include everything",
push include files to the individual drivers.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-12-sam@ravnborg.org

The CMA helper now has the functionality to ensure a virtual address on
imported buffer so use that.

While touching all tinydrm drivers, remove the unnecessary inclusion of
drm_fb_helper.h in some drivers.

Cc: David Lechner <david@lechnology.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-6-noralf@tronnes.org

Make full use of the generic fbdev client.

Cc: David Lechner <david@lechnology.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-8-noralf@tronnes.org

There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: NDavid Lechner <david@lechnology.com>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch

mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the
bowels of the .atomic_enable() hook. That prevents us from taking the
plane mutex in fb->dirty() unless we also plumb down the acquire
context.

Instead it seems simpler to split the fb->dirty() into a tinydrm
specific lower level hook that can be called from
mipi_dbi_enable_flush() and from a generic higher level
tinydrm_fb_dirty() helper. As we don't have a tinydrm specific
vfuncs table we'll just stick it into tinydrm_device directly
for now.

v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf)

Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323153509.15287-1-ville.syrjala@linux.intel.comReviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NNoralf Trønnes <noralf@tronnes.org>

tinydrm enable hook wants to play around with the new fb in
.atomic_enable(), thus we'll need access to the plane state.

Performed with coccinelle:
@r1@
identifier F =~ ".*enable$";
identifier P, CS;
@@
F(
	struct drm_simple_display_pipe *P
	,struct drm_crtc_state *CS
+	,struct drm_plane_state *plane_state
	)
{
...
}

@@
struct drm_simple_display_pipe *P;
expression E;
@@
{
+ struct drm_plane *plane;
...
+ plane = &P->plane;
P->funcs->enable(P
		,E
+		,plane->state
	);
...
}

@@
identifier P, CS;
@@
struct drm_simple_display_pipe_funcs {
...
        void (*enable)(struct drm_simple_display_pipe *P
	     		,struct drm_crtc_state *CS
+			,struct drm_plane_state *plane_state
		);
...
};

v2: Pimp the commit message (David)

Cc: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322202738.25817-1-ville.syrjala@linux.intel.comReviewed-by: NNoralf Trønnes <noralf@tronnes.org>

Split out common poweron-reset functionality.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Tested-by: NDavid Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-5-noralf@tronnes.org

Add and use a function for enabling, flushing and turning on backlight.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-4-noralf@tronnes.org

Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which
relies on the fact that drm_device holds a pointer to the drm_fb_helper
structure. This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove todo entry.

Cc: David Lechner <david@lechnology.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDavid Lechner <david@lechnology.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NDavid Lechner <david@lechnolgy.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org

Convert instances of dev_error to DRM_DEV_ERROR as we have
DRM_DEV_ERROR variants of drm print macros.
Signed-off-by: NHarsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221738.30200-1-harshasharmaiitr@gmail.com

Use drm_gem_framebuffer_helper directly instead of the cma
library wrappers.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-2-git-send-email-noralf@tronnes.org