While $ARCH can be relatively flexible (see Makefile and
tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory
name under arch/.

Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that
matches the expectations of bpf_helpers.h.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Acked-by: NVasily Gorbik <gor@linux.ibm.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Uses new RTT callback to dump stats every second.

$ mkdir -p /tmp/cgroupv2
$ mount -t cgroup2 none /tmp/cgroupv2
$ mkdir -p /tmp/cgroupv2/foo
$ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs
$ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog
$ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog
$ bpftool prog tracelog
$ # run neper/netperf/etc

Used neper to compare performance with and without this program attached
and didn't see any noticeable performance impact.

Sample output:
  <idle>-0     [015] ..s.  2074.128800: 0: dsack_dups=0 delivered=242526
  <idle>-0     [015] ..s.  2074.128808: 0: delivered_ce=0 icsk_retransmits=0
  <idle>-0     [015] ..s.  2075.130133: 0: dsack_dups=0 delivered=323599
  <idle>-0     [015] ..s.  2075.130138: 0: delivered_ce=0 icsk_retransmits=0
  <idle>-0     [005] .Ns.  2076.131440: 0: dsack_dups=0 delivered=404648
  <idle>-0     [005] .Ns.  2076.131447: 0: delivered_ce=0 icsk_retransmits=0

Cc: Eric Dumazet <edumazet@google.com>
Cc: Priyaranjan Jha <priyarjha@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth
Manager). Includes a new BPF program supporting EDT, and also updates
corresponding programs.

It will drop packets with an EDT of more than 500us in the future
unless the packet belongs to a flow with less than 2 packets in flight.
This is done so each flow has at least 2 packets in flight, so they
will not starve, and also to help prevent delayed ACK timeouts.

It will also work with ECN enabled traffic, where the packets will be
CE marked if their EDT is more than 50us in the future.

The table below shows some performance numbers. The flows are back to
back RPCS. One server sending to another, either 2 or 4 flows.
One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more
than one flow of a given RPC size, the numbers represent averages.

The rate limit applies to all flows (they are in the same cgroup).
Tests ending with "-edt" ran with the new BPF program supporting EDT.
Tests ending with "-hbt" ran on top HBT qdisc with the specified rate
(i.e. no HBM). The other tests ran with the HBM BPF program included
in the HBM patch-set.

EDT has limited value when using DCTCP, but it helps in many cases when
using Cubic. It usually achieves larger link utilization and lower
99% latencies for the 1MB RPCs.
HBM ends up queueing a lot of packets with its default parameter values,
reducing the goodput of the 10KB RPCs and increasing their latency. Also,
the RTTs seen by the flows are quite large.

                         Aggr              10K  10K  10K   1MB  1MB  1MB
         Limit           rate drops  RTT  rate  P90  P99  rate  P90  P99
Test      rate  Flows    Mbps   %     us  Mbps   us   us  Mbps   ms   ms
--------  ----  -----    ---- -----  ---  ---- ---- ----  ---- ---- ----
cubic       1G    2       904  0.02  108   257  511  539   647 13.4 24.5
cubic-edt   1G    2       982  0.01  156   239  656  967   743 14.0 17.2
dctcp       1G    2       977  0.00  105   324  408  744   653 14.5 15.9
dctcp-edt   1G    2       981  0.01  142   321  417  811   660 15.7 17.0
cubic-htb   1G    2       919  0.00 1825    40 2822 4140   879  9.7  9.9

cubic     200M    2       155  0.30  220    81  532  655    74  283  450
cubic-edt 200M    2       188  0.02  222    87 1035 1095   101   84   85
dctcp     200M    2       188  0.03  111    77  912  939   111   76  325
dctcp-edt 200M    2       188  0.03  217    74 1416 1738   114   76   79
cubic-htb 200M    2       188  0.00 5015     8 14ms 15ms   180   48   50

cubic       1G    4       952  0.03  110   165  516  546   262   38  154
cubic-edt   1G    4       973  0.01  190   111 1034 1314   287   65   79
dctcp       1G    4       951  0.00  103   180  617  905   257   37   38
dctcp-edt   1G    4       967  0.00  163   151  732 1126   272   43   55
cubic-htb   1G    4       914  0.00 3249    13  7ms  8ms   300   29   34

cubic       5G    4      4236  0.00  134   305  490  624  1310   10   17
cubic-edt   5G    4      4865  0.00  156   306  425  759  1520   10   16
dctcp       5G    4      4936  0.00  128   485  221  409  1484    7    9
dctcp-edt   5G    4      4924  0.00  148   390  392  623  1508   11   26

v1 -> v2: Incorporated Andrii's suggestions
v2 -> v3: Incorporated Yonghong's suggestions
v3 -> v4: Removed credit update that is not needed
Signed-off-by: NLawrence Brakmo <brakmo@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Due to recent change of include path at commit b552d33c
("samples/bpf: fix include path in Makefile"), some of the
previous include options became unnecessary.

This commit removes duplicated include options in Makefile.
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Recent commit included libbpf.h in selftests/bpf/bpf_util.h.
Since some samples use bpf_util.h and samples/bpf/Makefile doesn't
have libbpf.h path included, build was failing. Let's add the path
in samples/bpf/Makefile.
Signed-off-by: NPrashant Bhole <prashantbhole.linux@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Quentin reports that commit 07c3bbdb ("samples: bpf: print
a warning about headers_install") is producing the false
positive when make is invoked locally, from the samples/bpf/
directory.

When make is run locally it hits the "all" target, which
will recursively invoke make through the full build system.

Speed up the "local" run which doesn't actually build anything,
and avoid false positives by skipping all the probes if not in
kbuild environment (cover both the new warning and the BTF
probes).
Reported-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

It seems like periodically someone posts patches to "fix"
header includes.  The issue is that samples expect the
include path to have the uAPI headers (from usr/) first,
and then tools/ headers, so that locally installed uAPI
headers take precedence.  This means that if users didn't
run headers_install they will see all sort of strange
compilation errors, e.g.:

  HOSTCC  samples/bpf/test_lru_dist
  samples/bpf/test_lru_dist.c:39:8: error: redefinition of ‘struct list_head’
   struct list_head {
          ^~~~~~~~~
   In file included from samples/bpf/test_lru_dist.c:9:0:
   ../tools/include/linux/types.h:69:8: note: originally defined here
    struct list_head {
           ^~~~~~~~~

Try to detect this situation, and print a helpful warning.

v2: just use HOSTCC (Jiong).
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Convert test_cgrp2_attach2 example into a proper test_cgroup_attach
kselftest. It's better because we do run kselftest on a constant
basis, so there are better chances to spot a potential regression.

Also make it slightly less verbose to conform kselftests output style.

Output example:
  $ ./test_cgroup_attach
  #override:PASS
  #multi:PASS
  test_cgroup_attach:PASS
Signed-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Provide a count of class types for a summary of MAD packets.  The example
shows one way to filter the trace data based on management class.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.

USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
           [-w] [-h] [prog]
  Where:
   -d        Print BPF trace debug buffer
   -l        Also limit flows doing loopback
   -n <#>    To create cgroup "/hbm#" and attach prog. Default is /nrm1
             This is convenient when testing HBM in more than 1 cgroup
   -r <rate> Rate limit in Mbps
   -s        Get HBM stats (marked, dropped, etc.)
   -t <time> Exit after specified seconds (deault is 0)
   -w        Work conserving flag. cgroup can increase its bandwidth
             beyond the rate limit specified while there is available
             bandwidth. Current implementation assumes there is only
             NIC (eth0), but can be extended to support multiple NICs.
             Currrently only supported for egress. Note, this is just
	     a proof of concept.
   -h        Print this info
   prog      BPF program file name. Name defaults to hbm_out_kern.o

More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)
Signed-off-by: NLawrence Brakmo <brakmo@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

A cgroup skb BPF program to limit cgroup output bandwidth.
It uses a modified virtual token bucket queue to limit average
egress bandwidth. The implementation uses credits instead of tokens.
Negative credits imply that queueing would have happened (this is
a virtual queue, so no queueing is done by it. However, queueing may
occur at the actual qdisc (which is not used for rate limiting).

This implementation uses 3 thresholds, one to start marking packets and
the other two to drop packets:
                                 CREDIT
       - <--------------------------|------------------------> +
             |    |          |      0
             |  Large pkt    |
             |  drop thresh  |
  Small pkt drop             Mark threshold
      thresh

The effect of marking depends on the type of packet:
a) If the packet is ECN enabled, then the packet is ECN ce marked.
   The current mark threshold is tuned for DCTCP.
c) Else, it is dropped if it is a large packet.

If the credit is below the drop threshold, the packet is dropped.
Note that dropping a packet through the BPF program does not trigger CWR
(Congestion Window Reduction) in TCP packets. A future patch will add
support for triggering CWR.

This BPF program actually uses 2 drop thresholds, one threshold
for larger packets (>= 120 bytes) and another for smaller packets. This
protects smaller packets such as SYNs, ACKs, etc.

The default bandwidth limit is set at 1Gbps but this can be changed by
a user program through a shared BPF map. In addition, by default this BPF
program does not limit connections using loopback. This behavior can be
overwritten by the user program. There is also an option to calculate
some statistics, such as percent of packets marked or dropped, which
the user program can access.

A latter patch provides such a program (hbm.c)
Signed-off-by: NLawrence Brakmo <brakmo@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Some samples don't really need the magic of bpf_load,
switch them to libbpf.

v2: - specify program types.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

bpftool can do all the things load_sock_ops used to do, and more.
Point users to bpftool instead of maintaining this sample utility.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.

The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.
Tested-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Some of XDP samples that are attaching the bpf program to the interface
via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for
loading and manipulating the ebpf program and maps. Convert them to do
this through libbpf usage and remove bpf_load from the picture.

While at it remove what looks like debug leftover in
xdp_redirect_map_user.c

In xdp_redirect_cpu, change the way that the program to be loaded onto
interface is chosen - user now needs to pass the program's section name
instead of the relative number. In case of typo print out the section
names to choose from.
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

x86 compilation has required asm goto support since 4.17.
Since clang does not support asm goto, at 4.17,
Commit b1ae32db ("x86/cpufeature: Guard asm_volatile_goto usage
for BPF compilation") worked around the issue by permitting an
alternative implementation without asm goto for clang.

At 5.0, more asm goto usages appeared.
  [yhs@148 x86]$ egrep -r asm_volatile_goto
  include/asm/cpufeature.h:     asm_volatile_goto("1: jmp 6f\n"
  include/asm/jump_label.h:     asm_volatile_goto("1:"
  include/asm/jump_label.h:     asm_volatile_goto("1:"
  include/asm/rmwcc.h:  asm_volatile_goto (fullop "; j" #cc " %l[cc_label]"     \
  include/asm/uaccess.h:        asm_volatile_goto("\n"                          \
  include/asm/uaccess.h:        asm_volatile_goto("\n"                          \
  [yhs@148 x86]$

Compiling samples/bpf directories, most bpf programs failed
compilation with error messages like:
  In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2:
  In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6:
  In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15:
  In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5:
  In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5:
  In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9:
  In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72:
  /home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet
        return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl",
               ^
  /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc'
        __GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc,           \
        ^
  /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc'
        asm_volatile_goto (fullop "; j" #cc " %l[cc_label]"             \
        ^
  /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto'
  #define asm_volatile_goto(x...) asm goto(x)

Most implementation does not even provide an alternative
implementation. And it is also not practical to make changes
for each call site.

This patch workarounded the asm goto issue by redefining the macro like below:
  #define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")

If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad
will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler
will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.

With this patch, all bpf programs under samples/bpf can pass compilation.

Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as
they do not access kernel internal headers.

Fixes: e769742d ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")
Fixes: 18fe5822 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition")
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Avoid unneeded recreation of these in the incremental build.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

These explicit rules are unneeded because scripts/Makefile.build
provides a pattern rule to create %.s from %.c
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add additional checks in tools/testing/selftests/bpf and
samples/bpf such that if clang/llvm compiler can generate
BTF sections, do not use pahole.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).
Signed-off-by: NNikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Convert xdpsock_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

To smoothly test BTF supported binary on samples/bpf,
let samples/bpf/Makefile probe llc, pahole and
llvm-objcopy for BPF support and use them
like tools/testing/selftests/bpf/Makefile
changed from the commit c0fa1b6c ("bpf: btf:
Add BTF tests").
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add an example program showing how to sample packets from XDP using the
perf event buffer. The example userspace program just prints the ethernet
header for every packet sampled.
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NToke Høiland-Jørgensen <toke@toke.dk>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This is mostly to test kprobe/uprobe which needs kernel headers.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Building samples with clang ignores the $(Q) setting, always
printing full command to the output.  Make it less verbose.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Make complains that it doesn't know how to make libbpf.a:

scripts/Makefile.host:106: target 'samples/bpf/../../tools/lib/bpf/libbpf.a' doesn't match the target pattern

Now that we have it as a dependency of the sources simply add libbpf.a
to libraries not objects.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

There are many ways users may compile samples, some of them got
broken by commit 5f938057 ("samples: bpf: compile and link
against full libbpf").  Improve path resolution and make libbpf
building a dependency of source files to force its build.

Samples should now again build with any of:
 cd samples/bpf; make
 make samples/bpf/
 make -C samples/bpf
 cd samples/bpf; make O=builddir
 make samples/bpf/ O=builddir
 make -C samples/bpf O=builddir
 export KBUILD_OUTPUT=builddir
 make samples/bpf/
 make -C samples/bpf

Fixes: 5f938057 ("samples: bpf: compile and link against full libbpf")
Reported-by: NBjörn Töpel <bjorn.topel@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Workaround for the sake of BPF compilation which utilizes kernel
headers, but clang does not support ASM GOTO and fails the build.

Fixes: d0266046 ("x86: Remove FAST_FEATURE_TESTS")
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: daniel@iogearbox.net
Cc: peterz@infradead.org
Cc: netdev@vger.kernel.org
Cc: bp@alien8.de
Cc: yhs@fb.com
Cc: kernel-team@fb.com
Cc: torvalds@linux-foundation.org
Cc: davem@davemloft.net
Link: https://lkml.kernel.org/r/20180513193222.1997938-1-ast@kernel.org

Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers.  This way newcomers will be exposed to the
recommended library from the start.

Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

There are two copies of event reading loop - in bpftool and
trace_helpers "library".  Consolidate them and move the code
to libbpf.  Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

samples/bpf currently cherry-picks object files from tools/lib/bpf
to link against.  Just compile the full library and link statically
against it.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.

Take this only as a simple example of fast-path forwarding.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This is a sample application for AF_XDP sockets. The application
supports three different modes of operation: rxdrop, txonly and l2fwd.

To show-case a simple round-robin load-balancing between a set of
sockets in an xskmap, set the RR_LB compile time define option to 1 in
"xdpsock.h".

v2: The entries variable was calculated twice in {umem,xq}_nb_avail.
Co-authored-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.
Acked-by: NAlexei Starovoitov <ast@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Move the testsuite to
selftests/bpf/{test_tunnel_kern.c, test_tunnel.sh}
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

add empty raw_tracepoint bpf program to test overhead similar
to kprobe and traditional tracepoint tests
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>