We don't update the vcpu control registers in various places.  We
should do so.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This was missed when moving stuff around in fbc4f2e

Fixes Solaris guests and bug #1773613
Signed-off-by: NAmit Shah <amit.shah@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch enables INIT/SIPI handling using in-kernel APIC by
introducing a ->mp_state field to emulate the SMP state transition.

[avi: remove smp_processor_id() warning]
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NXin Li <xin.b.li@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

APIC timer IRQ is set every time when a certain period
expires at host time, but the guest may be descheduled
at that time and thus the irq be overwritten by later fire.
This patch keep track of firing irq numbers and decrease
only when the IRQ is injected to guest or buffered in
APIC.
Signed-off-by: NYaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add in kernel irqchip save/restore support for pending vectors.

[avi: fix compile warning on i386]
[avi: remove printk]
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch adds a new vcpu-based IOCTL to save and restore the local
apic registers for a single vcpu. The kernel only copies the apic page as
a whole, extraction of registers is left to userspace side. On restore, the
APIC timer is restarted from the initial count, this introduces a little
delay, but works fine.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch adds support for in-kernel ioapic save and restore (to
and from userspace). It uses the same get/set_irqchip ioctl as
in-kernel PIC.
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vcpu->irq_pending is saved in get/set_sreg IOCTL, but when in-kernel
local APIC is used, doing this may occasionally overwrite vcpu->apic to
an invalid value, as in the vm restore path.
Signed-off-by: NQing He <qing.he@intel.com>

This patch adds two new ioctls to dump and write kernel irqchips for
save/restore and live migration. PIC s/r and l/m is implemented in this
patch.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

pio operation and IRQ_LINE kvm_vm_ioctl is not kvm->lock
protected.  Add lock to same with IOAPIC MMIO operations.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

By sleeping in the kernel when hlt is executed, we simplify the in-kernel
guest interrupt path considerably.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows in-kernel host-side device drivers to raise guest interrupts
without going to userspace.

[avi: fix level-triggered interrupt redelivery on eoi]
[avi: add missing #include]
[avi: avoid redelivery of edge-triggered interrupt]
[avi: implement polarity]
[avi: don't deliver edge-triggered interrupts when unmasking]
[avi: fix host oops on invalid guest access]
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Because lightweight exits (exits which don't involve userspace) are many
times faster than heavyweight exits, it makes sense to emulate high usage
devices in the kernel.  The local APIC is one such device, especially for
Windows and for SMP, so we add an APIC model to kvm.

It also allows in-kernel host-side drivers to inject interrupts without
going through userspace.

[compile fix on i386 from Jindrich Makovicka]
Signed-off-by: NYaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch is to wrap APIC base register and CR8 operation which can
provide a unique API for user level irqchip and kernel irqchip.
This is a preparation of merging lapic/ioapic patch.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Split kvm_setup_pio() into two functions, one to setup in/out pio
(kvm_emulate_pio()) and one to setup ins/outs pio (kvm_emulate_pio_string()).
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Both vmx and svm decode the I/O instructions, and both botch the job,
requiring the instruction prefixes to be fetched in order to completely
decode the instruction.

So, if we see a string I/O instruction, use the x86 emulator to decode it,
as it already has all the prefix decoding machinery.

This patch defines ins/outs opcodes in x86_emulate.c and calls
emulate_instruction() from io_interception() (svm.c) and from handle_io()
(vmx.c).  It removes all vmx/svm prefix instruction decoders
(get_addr_size(), io_get_override(), io_address(), get_io_count())
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Line 1809 of kvm_main.c is useless, value is overwritten in line 1815:

1809         now = min(count, PAGE_SIZE / size);
1810
1811         if (!down)
1812                 in_page = PAGE_SIZE - offset_in_page(address);
1813         else
1814                 in_page = offset_in_page(address) + size;
1815         now = min(count, (unsigned long)in_page / size);
1816         if (!now) {
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

All guest-invokable printks should be ratelimited to prevent malicious
guests from flooding logs.  This is a start.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Devices don't need open or release functions.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We shouldn't define stat_set on the debug attributes, since that will
cause silent failure on writing: without a set argument, userspace
will get -EACCESS.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

For some reason, mark_page_dirty open-codes __gfn_to_memslot().
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

sSigned-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

All the physical CPUs on the board should support the same VMX feature
set.  Add check_processor_compatibility to kvm_arch_ops for the consistency
check.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_vm_ioctl_get_dirty_log scans bitmap to see it it's all zero, but
doesn't use that information.

Avi says:
	Looks like it was used to guard	kvm_mmu_slot_remove_write_access();
	optimizing the case where the guest just leaves the screen alone (which
	it usually does, especially in benchmarks).

	I'd rather reinstate that optimization.  See
	90cb0529 where the damage was done.

It's pretty simple: if the bitmap is all zero, we don't need to do anything to
clean it.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Now we use a kmem cache for allocating vcpus, we can get the 16-byte
alignment required by fxsave & fxrstor instructions, and avoid
manually aligning the buffer.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Avi wants the allocations of vcpus centralized again.  The easiest way
is to add a "size" arg to kvm_init_arch, and expose the thus-prepared
cache to the modules.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

... in favor of the more general emulator_{read,write}_*.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

... instead of a x86_emulate_ctxt, so that other callers can use it easily.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

There are several places where hardcoded numbers are used in place of
the easily-available constant, which is poor form.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Now that kvm generally runs with preemption enabled, we need to protect
the fpu intialization sequence.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows the kvm mmu to perform sleepy operations, such as memory
allocation.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Current kvm disables preemption while the new virtualization registers are
in use.  This of course is not very good for latency sensitive workloads (one
use of virtualization is to offload user interface and other latency
insensitive stuff to a container, so that it is easier to analyze the
remaining workload).  This patch re-enables preemption for kvm; preemption
is now only disabled when switching the registers in and out, and during
the switch to guest mode and back.

Contains fixes from Shaohua Li <shaohua.li@intel.com>.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add the hypercall number to kvm_run and initialize it.  This changes the ABI,
but as this particular ABI was unusable before this no users are affected.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch converts the vcpus array in "struct kvm" to a pointer
array, and changes the "vcpu_create" and "vcpu_setup" hooks into one
"vcpu_create" call which does the allocation and initialization of the
vcpu (calling back into the kvm_vcpu_init core helper).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

struct kvm_vcpu has vmx-specific members; remove them to a private structure.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

load_pdptrs can be handed an invalid cr3, and it should not oops.
This can happen because we injected #gp in set_cr3() after we set
vcpu->cr3 to the invalid value, or from kvm_vcpu_ioctl_set_sregs(), or
memory configuration changes after the guest did set_cr3().

We should also copy the pdpte array once, before checking and
assigning, otherwise an SMP guest can potentially alter the values
between the check and the set.

Finally one nitpick: ret = 1 should be done as late as possible: this
allows GCC to check for unset "ret" should the function change in
future.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

gfn_to_page might sleep with swap support. Move it out of the kmap calls.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Don't fall through and turn on PAE in this case.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>