The existing value was too conservative, causing
the history buffer not to be updated.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes a bug in ANI, where the MIB counters were
being cleared before the stats were updated.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch lays the groundwork for handling TSF Out of Range
interrupt, which will be used for power save later on.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch enables Fractional N mode for all channel
if the EEPROM says so, and also fixes the INI only
when the device is not a 2 GHz only capable device.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

AR9285 chipsets have a different EEPROM layout,
handle this appropriately when populating the rd_ext
capability.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes a bug where the max power level
was being calculated incorrectly.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

[246916.338046]
[246916.338048] Pid: 29265, comm: insmod Not tainted (2.6.29-rc4-wl #64) 9461DUU
[246916.338051] EIP: 0060:[<c02ca274>] EFLAGS: 00010202 CPU: 0
[246916.338055] EIP is at rollback_registered+0x24/0x220
[246916.338057] EAX: 00000001 EBX: 00000000 ECX: 00000000 EDX: f122e8fc
[246916.338059] ESI: 00000000 EDI: 00000000 EBP: f6595d30 ESP: f6595d1c
[246916.338062]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[246916.338064] Process insmod (pid: 29265, ti=f6594000 task=f7343fe0 task.ti=f6594000)
[246916.338067] Stack:
[246916.338068]  c04a2920 22222222 f6595d48 00000000 f122f080 f6595d48 c02ca489 f122e8fc
[246916.338076]  f122e220 f122f080 f122e220 f6595d5c f8a03156 f122e220 f122f080 f122e220
[246916.338085]  f6595d80 f87359af f122f080 00002000 f874e129 f122f150 f122f080 f6290000
[246916.338094] Call Trace:
[246916.338096]  [<c02ca489>] ? unregister_netdevice+0x19/0x70
[246916.338100]  [<f8a03156>] ? ieee80211_unregister_hw+0x36/0xd0 [mac80211]
[246916.338112]  [<f87359af>] ? ath_detach+0xcf/0x250 [ath9k]
[246916.338127]  [<f8735d9c>] ? ath_attach+0x26c/0x740 [ath9k]
[246916.338139]  [<f873c33a>] ? ath_pci_probe+0x13a/0x310 [ath9k]
[246916.338151]  [<c0233e28>] ? _raw_spin_unlock+0x68/0x80
[246916.338158]  [<c023ab8e>] ? local_pci_probe+0xe/0x10
[246916.338162]  [<c023b8e0>] ? pci_device_probe+0x60/0x80
[246916.338169]  [<c029e042>] ? driver_probe_device+0x82/0x1b0
[246916.338174]  [<c029e1f9>] ? __driver_attach+0x89/0x90
[246916.338180]  [<c029d97b>] ? bus_for_each_dev+0x4b/0x70
[246916.338184]  [<c023b820>] ? pci_device_remove+0x0/0x40
[246916.338190]  [<c029ded9>] ? driver_attach+0x19/0x20
[246916.338193]  [<c029e170>] ? __driver_attach+0x0/0x90
[246916.338197]  [<c029d317>] ? bus_add_driver+0x1b7/0x230
[246916.338203]  [<c023b820>] ? pci_device_remove+0x0/0x40
[246916.338206]  [<c029e399>] ? driver_register+0x69/0x140
[246916.338212]  [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k]
[246916.338221]  [<c023bb4e>] ? __pci_register_driver+0x4e/0x90
[246916.338225]  [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k]
[246916.338232]  [<f859d06b>] ? ath_pci_init+0x17/0x19 [ath9k]
[246916.338238]  [<f859d017>] ? ath9k_init+0x17/0x54 [ath9k]
[246916.338245]  [<c017148e>] ? tracepoint_update_probe_range+0x7e/0xb0
[246916.338249]  [<c010111a>] ? do_one_initcall+0x2a/0x170
[246916.338252]  [<c0149f26>] ? up_read+0x16/0x30
[246916.338256]  [<c014aa9d>] ? __blocking_notifier_call_chain+0x4d/0x60
[246916.338265]  [<c0162b1a>] ? sys_init_module+0x8a/0x1c0
[246916.338269]  [<c022f888>] ? trace_hardirqs_on_thunk+0xc/0x10
[246916.338272]  [<c0103ebf>] ? sysenter_do_call+0x12/0x43
[246916.338276] Code: 8d bc 27 00 00 00 00 55 89 e5 56 89 c6 53 83 ec 0c a1 74 27 4a c0 85 c0 0f 85 4b 01 00 00 e8 04 7d 00 00 85 c0 0f 84 c9 01 00 00 <8b> 86 18 03 00 00 85 c0 0f 84 86 01 00 00 83 e8 01 0f 85 71 01
[246916.338328] EIP: [<c02ca274>] rollback_registered+0x24/0x220 SS:ESP 0068:f6595d1c
[246916.338335] ---[ end trace 76357c56a75ea34e ]---
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Impact: Make symbols static.

Fix this sparse warnings:
  drivers/net/wireless/ath9k/eeprom.c:1343:5: warning: symbol 'ath9k_hw_4k_get_spur_channel' was not declared. Should it be static?
  drivers/net/wireless/ath9k/eeprom.c:1372:19: warning: symbol 'eep_4k_ops' was not declared. Should it be static?
  drivers/net/wireless/ath9k/eeprom.c:2649:5: warning: symbol 'ath9k_hw_def_get_spur_channel' was not declared. Should it be static?
  drivers/net/wireless/ath9k/eeprom.c:2678:19: warning: symbol 'eep_def_ops' was not declared. Should it be static?
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need the udelay() for all families, including AR5416.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This is used for ASPM.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch removes the various function pointer
assignments and unifies them in a single ops structure.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This is preparatory work for removing the individual
function pointer assignments in eeprom.c
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Finally, merge these structures and have a single
HW specific data structure.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

A few variables (bssid, bssidmask, curaid) were duplicated in
struct ath_softc and in ath_hal, remove them.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch moves all the HW version/revision specific
information into a separate structure.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch removes the useless sc_ prefixes for all variables.
Also, refer to interfaces as VIFs and not as VAPs anymore.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch converts the ANI channel reference to a pointer,
this facilitates moving struct ar5416AniState to ani.h
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Split the core header files into manageable pieces.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use mac80211's primitives for identifying the frame type,
and cleanup the driver-specific macros.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The nl80211 rule flags were being used.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fixed led device naming for the ath9k driver. Due to the
documentation of the led subsystem/class the naming should be
"devicename:colour:function" while not applying sections
should be left blank.

This should lead to e.g. "ath9k-%s::rx" instead of "ath9k-%s:rx".
Signed-off-by: NDanny Kukawka <dkukawka@suse.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

mac80211 notifies the RC algorithm if RTS/CTS and short preamble
are needed. The RC flags for MCS rates are currently not handled
by mac80211, and ath9k's RC doesn't set the flags either. Fix this.

Also, set the rts_cts_rate_idx inside the RC algorithm.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The interface to calculate the TX rate for a data frame
was convoluted with lots of redundant arguments being
passed around. Remove all of that and make it simple.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

RX filter masks are already defined in enum ath9k_rx_filter
in ath9k.h
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If we have new found information about our location and the
current country regulatory domain does not have passive scan
flag requirements we should be able to actively scan now on those
channels.

Since AP functionality is not allowed where passive scan flags are
set this means if you have a world regulatory domain and you get a
country IE that allows that channel (with active scan) then we lift
the passive-scan requirement so you can then use AP mode.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This will be used later.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

No need to use our internal wireless mode variable when
cfg80211 already has its own.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Enable operating mode specific interrupts in ath9k_add_interface instead
of ath9k_start.
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes the lockdep warning shown below, and also
initializes the starting sequence number when starting a TX
aggregation session.

 =============================================
 [ INFO: possible recursive locking detected ]
 2.6.29-rc2-wl #21
 ---------------------------------------------
 swapper/0 is trying to acquire lock:
  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290

 but task is already holding lock:
  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290

 other info that might help us debug this:
 7 locks held by swapper/0:
  #0:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  #1:  (_xmit_ETHER#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  #2:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  #3:  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  #4:  (rcu_read_lock){..--}, at: [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211]
  #5:  (rcu_read_lock){..--}, at: [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211]
  #6:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620

 stack backtrace:
 Pid: 0, comm: swapper Not tainted 2.6.29-rc2-wl #21
 Call Trace:
  <IRQ>  [<ffffffff8026c329>] __lock_acquire+0x1be9/0x1c40
  [<ffffffff80442af1>] dev_queue_xmit+0xe1/0x620
  [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40
  [<ffffffff8026c3d5>] lock_acquire+0x55/0x70
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff804dbeb9>] _spin_lock+0x39/0x50
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff804dbd2f>] _spin_unlock+0x1f/0x50
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa0142a63>] ieee80211_start_tx_ba_session+0x303/0x4e0 [mac80211]
  [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211]
  [<ffffffffa0149dae>] rate_control_get_rate+0xae/0xc0 [mac80211]
  [<ffffffffa01526b5>] invoke_tx_handlers+0x655/0x1000 [mac80211]
  [<ffffffff802699fd>] mark_held_locks+0x4d/0x90
  [<ffffffff804dbcf5>] _spin_unlock_irqrestore+0x65/0x80
  [<ffffffffa0151aaa>] __ieee80211_tx_prepare+0x16a/0x310 [mac80211]
  [<ffffffffa0151adc>] __ieee80211_tx_prepare+0x19c/0x310 [mac80211]
  [<ffffffff80439cc2>] pskb_expand_head+0x112/0x190
  [<ffffffffa0154986>] ieee80211_master_start_xmit+0x286/0x6c0 [mac80211]
  [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211]
  [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40
  [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa0154221>] ieee80211_subif_start_xmit+0x4a1/0x980 [mac80211]
  [<ffffffffa0153f18>] ieee80211_subif_start_xmit+0x198/0x980 [mac80211]
  [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa028ecfd>] ip6_output+0x62d/0x1230 [ipv6]
  [<ffffffff8024ca00>] __mod_timer+0xb0/0xd0
  [<ffffffffa02ad25a>] mld_sendpack+0x3fa/0x4a0 [ipv6]
  [<ffffffffa02ace60>] mld_sendpack+0x0/0x4a0 [ipv6]
  [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6]
  [<ffffffffa02ae219>] mld_ifc_timer_expire+0x289/0x340 [ipv6]
  [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6]
  [<ffffffff8024c097>] run_timer_softirq+0x147/0x220
  [<ffffffff802473fb>] __do_softirq+0x9b/0x180
  [<ffffffff80265516>] tick_dev_program_event+0x36/0xb0
  [<ffffffff8020d77c>] call_softirq+0x1c/0x30
  [<ffffffff8020f2c5>] do_softirq+0x65/0xb0
  [<ffffffff80246ebd>] irq_exit+0x9d/0xc0
  [<ffffffff80221db6>] smp_apic_timer_interrupt+0x86/0xd0
  [<ffffffff8020d1b3>] apic_timer_interrupt+0x13/0x20
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Removing the module was slow because ath9k_hw_stopdma()
was looping for a long time quantum. Use reasonable
values now to fix this issue.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>